Bex query error problem

Hi Friends,
1) when i am executing the query it is showing below error.
Please give me solution how to slove below problem:-
Error no sid found for value 'TB' of Characteristic 0UNIT error
error while reading the data; Navigation is possible.
2) Variables selection not appearing while executing query
i created 2 variables on plant and material these variable screen is not appearing while executing the query.
it is showing empty screen. Plz give me solution how to solve.
I am waiting for your replies.
thanks,
Guna

Hi Ravi,
I did all the things waht u gave the tips before thread,
This query is created by on infoset.
infoset is combination of different master data.MARA and MARC this master data loaded in to ZWMAT_PLT.
MARD table master data loaded in to 0MAT_ST_LOC.
MKAL table master data loaded in to DSO ZWPROVER.
i created info set using ZWMAT_PLT,0MAT_ST_LOC and ZWPROVER.
i created query on infoset. when ever executing this query i faced same problem.
another thing is variable selection screen also not appearing.
Please give me help on this issue.
Thanks.
guna.

Similar Messages

BEX Query error at Program SAPLRSDU_UTIL_DB2 - 'Table Does not Exist'

Hello all,
My BEX Query was running fine till yesterday in QAS system, but today when i try to execute either in RSRT/Analyzer i am seing this error:
Runtime Errors         RAISE_EXCEPTION
Date and Time          10/26/2011 14:03:44
What happened?
     The current ABAP/4 program encountered an unexpected
     situation.
Error analysis
     A RAISE statement in the program "SAPLRSDU_UTIL_DB2" raised the exception
     condition "TABLE_DOES_NOT_EXIST".
     Since the exception was not intercepted by a superior
     program, processing was terminated.
     Short description of exception condition:
     For detailed documentation of the exception condition, use
     Transaction SE37 (Function Library). You can take the called
     function module from the display of active calls.
Trigger Location of Runtime Error
     Program                                 SAPLRSDU_UTIL_DB2
     Include                                 LRSDU_UTIL_DB2U35
     Row                                     41
     Module type                             (FUNCTION)
     Module Name                             RSDU_GET_PARTITIONING_TYPE_DB2
Any suggestion?
I would really appreciate you help!
Thanks,
DC

Thanks you all for your response!.
Checked the Info providers, Tranformations - All are active.
Couple of reports which are based out of same MultiProvider are giving the same issue.
I could figure out where the problem is!
There is a RKF (in all the error giving queries) and 'GL Account' has been restricted with a Heirarchy 'ZZ21430 in it - but this restricted hierarcy is missing in 'RSH1'.
Dev system - 'ZZ21430' doesnt exist in RSH1 and query doesnt give any error, is running fine.
QAS system - 'ZZ21430' doesnt exist RSH1 and query is giving error!
What could be the reason for this?
I would appreciate your help!
Thanks,
DC

Bex Query Broadcasting Problem

HI ,
            My Enterprise Portal is working fine in sense that it is showing me the accurate result of query
But when i am trying to broadcast it , it gives me the error saying OPERATION TIME OUT in the browser.
I also checked the TCP/IP connection but it is working fine.
please help .

Hi Suhas,
    You can check this post: BEX query time out in portal
Venkhadesh said that:
Please refer to note Note 824554 which will help you in maintaining the ICM time out parameter values.
824554   ICM and SAP Web Dispatcher Timeout Parameter
Please refere also to the note:
1044330 - Java parameterization for BI systems
1127156 - Safety belt: Result set is too large

BEX query error---Error reading the data of InfoProvider

Hello all,
we are getting the following msg when we execute the query-
Error reading the data of InfoProvider ZEUDPR01
Errors occurred when extracting data from DataSource 9AEU_DOM
Short Text: Error for COM routine using application program (return c
Parameter: 1028533- LC kernel
Message in Source System: E102(/SAPAPO/OM) ...
Short Text: COM - error Unknown
Parameter: Unknown
Message in Source System: E001(/SAPAPO/OM) ...
Messages for DataSource 9AEU_DOM from source system PA1CLNT100
Errors occurred during parallel processing of query 4, RC: 3
Error while reading data; navigation is possible
Row: 54 Inc: WRITE_MESSAGES Prog: CL_RSDR_AT_QUERY
Found
This is the error observed for a particular selection only..for rest of the selection we get the data correctly.
Please help with the possible causes of error.
Thanks,
Pallavi

Hi Pallavi,
How did you manage the pb?
we have the same error after Stack 21 (SP23)
we could not run query.
Thanks.
John

BEx query change problem

Hi there,
In QA, when I try to open the local view or global view of a query in BEx, I am getting the following error/message
"The following objects were not found when accessing the server.."
-Press Repair to correct the problem(incorrect parts of the query are automatically deleted)
If anyone has faced the issue kindly let me know.
Thank You
Ace

Hi Ace,
Welcome to SDN!
It seems the objects mentioned in the message were not available in the dataprovider on which the query is based, hence the query designer is trying to correct this (which is a default behavior of the query designer).
This can happen if you had those objects in the datatarget initially and both the datatarget/query were transported into QA initially, and subsequently any of those objects may have been removed from the datatarget definition, and when the latest objects are moved to QA, by default query designer detects it and prompts you for the correction.
So, after validating the fact that those missing objects were removed for valid reasons from the corresponding datatarget definition, click on repair and you should be able to continue further.
Hope it helps,
Sree

BEx Query Execution problem

Hi,
I got a problem when I click Execute button in Query Designer to run a query. It popup a IE windows with a URL like below
http:///irj/servlet/prt/portal/prtroot/pcd!3aportal_content!2fcom.sap.pct!2fplatform_add_ons!2fcom.sap.ip.bi!2fiViews!2fcom.sap.ip.bi.bex?QUERY=PM_SALES_ANALYSIS&VARIABLE_SCREEN=X&DUMMY=2
Apparently, the URL is wrong. It seems it try to connect to EP server to run the query. But I donnot have a EP server. What I just want, the query running via BEx web service. The expected URL should be
http://SERVER:PORT/sap/bw/bex?QUERY=PM_SALES_ANALYSIS&VARIABLE_SCREEN=X&DUMMY=1
Some configuration in SAP BI 7 server,
SICF --> test BEx service works fine
RSPOR_T_PORTAL not maintained(No entry)
Environment: Only SAP BI 7 without EP
Is there anybody can help me on this? How can I check and configure to fix this problem? Thanks a lot in advance.
Thanks
Nanshu

Hi Wang,
You could check the setting in SPRO transaction through following path:
in the SAP Reference IMG under SAP NetWeaver -- > Business Intelligence --> Reporting-Relevant Settings --> BEx Web
You can also assign standard web templates to all your queries from here.
Hope this helps.
Regards,
Vidya

BEx Query Designer problem when generate URL to IE

Hello everyone,
When I click the "Execute" button to run a query in Query Designer , it pop-up a IE windows with URL:
http:///irj/servlet/prt/portal/prtroot/pcd!3aportal_content!2fcom.sap.pct!2fplatform_add_ons!2fcom.sap.ip.bi!2fiViews!2fcom.sap.ip.bi.bex?QUERY=ZSALESREP01&VARIABLE_SCREEN=X&DUMMY=1
And IE display that "The address is not valid".
I think the reason is that there are some configuration not do.
Could any guys tell me what configuration should be done ?
Thank you!
BR,
Louis

Hi,
I think the Bex service is not confirgured correctly in your system.
For the WEB functionality to work corectly in your BW system there are several configurations that should be done. They are the Host name, listening ports, Protocols and the ICF service should be maintained & activated. The transactions involved are SMICM and SICF where you can check for these settings...
Refer to the hot to document on SDN:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/994a06ed-0c01-0010-878b-e796a9060209
Which gives the complete step by step instructions. check these settings in your system and contact your basis or portal team to configure them correctly.
Regards,Shilpa

Bex Query Error - form LRECH_F_CHFP_01-01

Hello Friends,
My query is getting the error below when saving and running, can you please advice me some ways to get rid of? What should i check?
- System error in program SAPLRRI2 and form LRECH_F_CHFP_01-01
Thanks for your helps in advance..

What is the version you are in Bi7.0 or 3.x?
What is the GUI and the patch level you are using?
try to install the latest GUI and patch along with the .net component and check if it works fine or not?
Try to search for SAP notes related to your error.
Regards
KP

BEx query error after adjust 0vender master table

Dear Experts
Since we need change "lower case" setting on Ovender infoObject (no record with Lower case for Ovendor), To active it without delete transcation data, I manually adjust table ( P table, S table and T table ) with delete data, then active it and reload 0vendor master.
after that, when we execute report, system give the errer "System error in program CL_RSDM_READ_MASTER_DATA and form sidvaldirect_read2"
Pls help
Thanks

Hi,
The first thing to be noted here is that, the "Lower case" settings check box in the Info-object maintainance scree is not for the purpose of allowing or rejecting records with Lower case.if the lower case check box is selected then the Variable entry screen or any selection related to the info object distinguishes between Upper case and Lower case entries. If unselected then it does not distinguish between Upper case and lower case entries in Variable entry screen or any selection related to the info object.
The kind of operation on Ovender infoObject (no record with Lower case for Ovendor) must be done in Start Routine's either in the Transfer rules or Update Rules depending on your context need like its global or local.
As your previous data doesnt hole any lower case entries in 0Vendor, no need to delete the data also. You can simply write a Start routine to block lower case records from entering the system.
As far as your manipulation w.r.t to Info object tables is concerned, My suggestion is not to deal with DB tables independently, as the application may not recognise the operation of individual tables content deletion.
hope this helps.
regards,
kishore

Bex Query output problem

Hi Experts,
Plz go through the fallowing scenerio and answer the question.
For a customer opprtunity should be within the scheduled 18 months of time period.That means if RFP(Request for propasal) is on
particular date and the scheduled award date is on particular date.If the scheduled award date is not fallowing in the 18 months time span then that award date need to be considered for report generation.
Here we are getting both RFP and award dates from CRM systems.
How can we calculate the 18 months irrespective of the begining months.?

Hi,
Take Both Dates in to Report.
Create 2 Formula varible on Respectively on Both Dates.
Create A formula .And use the above 2 Formula variables in the Formula like : FarVAR1 -FARVAR2.
Create a condition on the formula to hide rows which does not give Formula = 18*30.
Other option is
USe a KF in cube itself and USe a Formula to get difference between dates.
With rgds,
Anil Kumar Sharma .P

Error while trying to run Bex Query -------- Field symbol is not assigned.

Hello Every body,
I am facing the following error after giving some value in Selection screen and trying to run the Bex Query
ERROR : Field symbol is not assigned.
Thanks in advance,
Praveen

can u plz give details of variables, what it is build on and the value u r inputing,
also is thr any dump.
double click on the error message it shows u. it will give u the detailed error message. post that too

특정 SUPPLIER SITE LEVEL의 DATA수정 시도시 RE-QUERY ERROR

제품 : FIN_AP
작성날짜 : 2004-05-19
특정 SUPPLIER SITE LEVEL의 DATA수정 시도시 RE-QUERY ERROR
=================================================
Problem Description
특정 Supplier Site level의 Data수정 시도시 아래의 Message발생
==============================================
record has been updated, re-query block to see change
==============================================
Solution Description
아래의 SQL을 실행해서 "CHK_TRAIL_SPACE"라는 Procedure를
만든 후 생성된 Procedure를 다음의 방법으로 실행하면, Input Table의
어떤 Column에 NULL문자가 들어갔는지 확인할 수 있다.
set serveroutput on
execute chk_trail_space(<table_name to check>);
i.e. (execute chk_trail_space('PO_VENDORS');)
trailspace.sql:
===============================================================================
CREATE OR REPLACE PROCEDURE CHK_TRAIL_SPACE (p_table_name in varchar)
IS
v_table_name varchar(30);
v_column_name varchar(30);
v_column_name_c char(30);
v_space_count number;
v_ret number; -- temp holder for above
v_initial_space_counter number;
dyn_cursor number;
CURSOR TABLE1 IS
SELECT table_name
FROM DBA_TABLES
WHERE table_name = p_table_name;
CURSOR COLUMN1 IS
SELECT column_name
FROM DBA_TAB_COLUMNS
WHERE table_name = v_table_name;
BEGIN
OPEN TABLE1;
LOOP
-- FOR crec1 in TABLE1 LOOP
fetch TABLE1 into v_table_name;
IF (TABLE1%NOTFOUND) THEN
exit;
END IF;
dbms_output.put_line(v_table_name);
dbms_output.put_line
v_initial_space_counter := 0;
OPEN COLUMN1;
LOOP
-- FOR crec2 in COLUMN1 LOOP
fetch COLUMN1 into v_column_name;
IF (COLUMN1%NOTFOUND) THEN
exit;
END IF;
dyn_cursor := DBMS_SQL.OPEN_CURSOR;
DBMS_SQL.PARSE
(dyn_cursor,
'SELECT COUNT(*) ' ||
'FROM ' || p_table_name ||
' WHERE ' || v_column_name || ' LIKE ''% ''',
DBMS_SQL.NATIVE);
DBMS_SQL.define_column (dyn_cursor, 1, v_space_count);
v_ret := DBMS_SQL.EXECUTE(dyn_cursor);
if DBMS_SQL.fetch_rows(dyn_cursor) > 0 then
DBMS_SQL.column_value (dyn_cursor, 1, v_space_count);
end if;
DBMS_SQL.CLOSE_CURSOR(dyn_cursor);
IF v_space_count > 0 THEN
v_initial_space_counter := v_initial_space_counter + 1;
END IF;
v_column_name_c := v_column_name;
IF v_space_count > 0 THEN
dbms_output.put_line(' ' || v_column_name_c || to_char(v_space_count))&
#059;
END IF;
end loop;
close column1;
end loop;
close table1;
END CHK_TRAIL_SPACE;
====================================================================
NULL문자가 들어간 Column이 확인되면,
update po_vendors
set vendor_name = rtrim(vendor_name);
위의 방법으로 수정하면 된다.
Reference Documents
Note :234048.1

If I delete the purchase details/line item, the supplier site can be changed.
The error appeared again after the new line item selected,click on "Shipment" button, and change the supplier site.
It's not able to change it. Any reason caused by the line item shipment? how it relate?

Error while executing BEx Query on Composite Provider

Hi,
We have a BW on-HANA system, patch level SAPKW73105.
We have created a Composite provider based on the union of two DSOs, two infoobjects, one SPO, and there are a couple of joins with two other DSOs, on the top of that we built a BEx query.
While executing the BEx query, sometimes (depending on the filter values), We got the following error message
"Attribute engine failed;Error executing physical plan: exception 6900: AttributeEngine/Parallel/DimensionFilter.cpp engine failed; $function$=getValidFemsPA;"
"Error 6,900 has occurred in the BWA/SAP HANA server"
"Error reading the data of InfoProvider @3ZSDRPCP5"
"Error while reading data; navigation is possible"
"Row: 59 Inc: MAP_TREX_EXCEPTION Prog: CL_RSDRH_TREX_STORAGE"
(Attached error message)
Ii We browse the composite provider data using the "display data" option in the RSA1, data is displayed without issue, the problem only appears during the BEx query execution and only with some filter vaues.
Any idea on how to fix the issue.
Thanks,
Federico

He's on 7.3 EhP1, which is on SPS12 today. It got pretty stable by SP08, SP09. SP05 was pretty early on, and had a lot of bugs in the HANA views.
7.4 is on SP07 like you say, and most of our customers run at least SP06 - before then, you had to apply a bucketload of SAP notes. I would recommend customers apply SP08 with care because it's a feature release so will have a bunch of new features, which will no doubt need corrections.

MDX Error in WebI while running Bex Query

Dear Experts,
In my System BO XI R3.1 Enterprise and Integration kit For SAP has installed.
While creating query with Efashion and MS Acess files query is running fine.
But in case of BI queries(InfoCube or BEx Query) it is giving "Select Dimension 1 CrossJoin Dimension2...."Error(10901).
Test Connection of BI (The server is responding)is working fine.
How to solve the issue?
Thanks in Advance
Venkat P

Hi Venkat,
Obviously there is something wrong with your query.
What happens if you parse the MDX using the BW transaction MDXTEST - does it work ok?
You need to try and identify at what point the query is failing, i.e. is it caused at the BW layer or is it a problem at the XI3.1 application layer...?
I hope this is a very helpful answer to you.
Kind regards,
John

Error while openening InfoProvider in Bex Query Designer

Hi all,
i am getting an error while opening the InfoProvider for a new Query in the Bex Query Designer.
Error Group
RFC_ERROR_SYSTEM_FAILURE
Message
Exception CX_RSR_MESSAGE in program SAPLRRMS
RRMS_X_MESSAGE
Main Program: SAPMSSY1
Include Program: LRRMSU13
What could be the problem?
Thanks in advance
Andreas

Hello Andreas,
seems as if JCo Connections on your system have not been set up correctly.
Please have a look here:
http://help.sap.com/saphelp_erp2005vp/helpdata/en/ca/115e4088dc0272e10000000a155106/frameset.htm
Regards,
Daneil

Bex query error problem

Similar Messages

Maybe you are looking for