Bex Query Exception Not Appearing In Bex Report

I have a created an exception in a Bex Query and built a report using the Bex Report Designer. But the exceptions that work fine in the query dont seem to work once I've embedded the query in a report. Is this right? is it not possible to use exceptions in a report or do I need to turn something on etc?
Any help much apreciated.

Hi Joel,
Pls refer the OSS # 331772 reg. this limitation. Exceptions if applied will not be dynamic in RD.
Report designer is a flat structure. You cannot collapse or expand the static columns. Hence, Conditions/Exceptions are not supported in Report Designer. You may try alternatively in WAD. It will surely work in WAD for formatted web based reports.
Thanks,
Arun Bala

Similar Messages

Bex Query is not refereshing in analyzer..

Hi Experts,
I am having a issue bex query is not refreshing in the bex analyzer.
Actually my requirement to create a workbook on bex query. I have made once workbook but that also not refreshing .
I already check the tick mark for refresh workbook on open,
Please help.

Hi,
Refer below screenshot and check it, since I don't have enough screenshots/steps to reproduce. It is just a guess, so check on below points and respond.
1. Is workbook is connected to system? check the connected/connection by clicking on icon (marked in purple). If it is connected, then proceed to next step.
2. Are you clicking on 'Refresh' button (marked in red)? and saying variable screen is not appearing OR report is not refreshed? If yes, then proceed to next step.
3. If you want to refresh and input value again, then click on 'Change Variable Values' Icon (marked in green).
Hope it gives you steps to identify root cause.
Thanks,
Umashankar

Bex Query is not working in portal

Dear Experts,
i have uploaded BI master role into portal, By default Bex Queries are assgined to Master Role. when I clcik on preview for particular Bex Query, it's working fine. but after assigning the master role to end user, that same Bex Query is not working. it's showing Below error..
Portal runtime error.
An exception occurred while processing your request. Send the exception ID to your portal administrator.
Exception ID: 05:22_18/08/10_0002_7116150
Refer to the log file for details about this exception.
please give me suggetions...
Regards,
VENU

Hi Venu ,
Can you please check the logs for details - http(s):<host>:<port>/nwa . This may be a permissions issue . Check if the iview has read permission for everyone group and then test . Also post the error details here .
Regards
Mayank

Lead time values are not appearing in the report for current year.

Hi friends,
Iam checking a report in production. where lead time values are displayed as 0 for 1 key figure lead time3 (w/0 dim) . i found there is a formula for this it shows like NODIM ( 'Lead Time 3' ).and there is a value for cal.lead time
how can i get values in the report.
Thanks ,
VRV.

Hi,
Although your question is not clear, I understood that the formula built on that KF is NODIM. Basically it means, units of measurement is not considered when calculating.
Eg: 5 Minutes + 5 Kilograms = 10
You please try to analyze your KF by the above logic. Then you would be able to figure out why the data is not appearing in the report..
Assign if helps...
Regards,
Suman

WHT amount not appearing in FBL1N report for Document type RE

Dear Friends,
While running FBL1N report for any vendor where TDS is applicable, the WHT amount is appearing for KR document type. But when it is RE document type the WHT amount is not appearing in the report. How can we resolve this? Any enhancement/any note to be applied?
Regards,
Ramkumar

Hi,
FBL1N is having the classic withholding tax field hence please don't refer the those fields.
please don't refer those fields.
Please review attached note 363309 for detailed explanation.
BSEG-QBSHB is designed to fill for the classic withholding tax. And
extended withholding tax information is stored exclusive in table
WITH_ITEM.
You can check in table BSEG for the fields and will find that system
do NOT update field BSEG-QBSHB.
In your line layout,you define a field BSEG-QBSHB. But actully the field
of vendor/customer line item is filled with zero from FI. Thus,it shows
zero in line item display.
And as note 363309 says,
"Remove the field which contains the withholding tax information
from your display variant.
If you want to display the withholding tax information, double-click on
the document number and subsequently choose 'Withholding tax'."
Regards
Madhu M
Edited by: M Madhu on Jan 18, 2012 9:13 AM

Bex Query calc key figures in Crystal report not showing technical names.

Hi,
I have created calculated key figures in a BEx query for which the data comes from a SAP BW cube. I have assigned each of the calculated key figures a proper technical name which I expect to see when I bring it to crystal report. When I bring that query in Crystal as a data source the calculated key figures show a wier network id names instead of the technical names. I am having a problem in using those wierd technical name in my report and my formula's as I am not able to identify what is what.
Please urgent help requested.
Thanks
Mahendra

I dont have an account on such website. I will explain u the problem in detail.
When I create a calculate key figure in SAP BEx query designer I assigned a technical name to it, a meaningful one. In my case one such example is Actual_revenue is the name that i have assigned and the description is Actual revenue. When I create a crystal report from it and in that report if i create a formula.
I get this {ZIC_COPA_Z_SALES.[Measures]-[25V1KYL4VE92X0T4OMHVYM90V]}
If u see it its a wier 25 digit name.
Instead of this I want to see
{ZIC_COPA_Z_SALES.[Measures]-[ACTUAL_REVENUE]} which is what I have given in the query. I am using the SAP BW MDX driver to connect to Bex query.

0Equipment - specific equipment not appearing in BEx query

Hi all
We load data to 0equipment. This has been running successfully, no data loading issues. We have various queries associated with this InfoProvider.
The queries are fine and work as designed except that 2 pieces of equipment are not appearing in the analyser.
I can find no issues with the indivudal records - they are in BW (I checked the master data for 0Equipment and they are there). The master data is active.
I thought there might be some restrictions in the query which was causing these records to be omitted, so wrote a new test query on that InfoProvider where I apply no restrictions except on equipment number. I tested this with a piece of equipment that I know works, and the test query returns my data. However, when I run it for the problematic equipment I get 'No data available'. (when I execute the query I am able to select the problematic equipment number from the list of single values).
I'm rather stumped - any suggestions most welcome.
thanks and regards, Lara

run an RSRV test on the infoobject, there may be an issue with the SIDs. or if its a nav attribute could be an issue with the
X Y tables. RSRV should help

Custom Filter in Universe on top of BEX Query is not working in BO Explorer?

Hi,
I have created Condition(Filter) for an Dimension Object "Submitted by Group Hierarchy" in Universe designer tool on top of SAP BEx Query and then exported the universe to Repository.
<FILTER KEY="@Select(Submitted By Group Hierarchy\L01 Submitted By Group Hierarchy).[TECH_NAME]"><CONDITION OPERATORCONDITION="InList"><CONSTANT CAPTION="@Prompt('Submitted By Group ','A',' Submitted By Group Hierarchy\L01 Submitted By Group Hierarchy',multi,primary_key,,{‘Direct Sales’)"/></CONDITION></FILTER>
To test my custom filter , I have created WEBI report and its allowing input entry in my custom filter and output is also coming .
where as in Explorer, i am not able to enter input values for my custom filter as below.
Can anyone suggest me how to create custom filter in universe and use it in explorer.
Thanks in advance.
Regards,
Ramana.

Hi Ramana,
Please try using 'mono' in place of multi in @prompt syntax and then test.
Regards,
Pranay Sharma

Optional BEx query variables not working in WebI

Hi,
I have an Webi report based on Bex Query using BICS connection.
One characteristic is restricted with two variables. First an authorization variable and additional with an input ready variable.
This input ready variable is optional. When it comes up in webi and you choose a value it doesn't filter on it.
We are on BO 4.1. SP3 and BW 7.31.
With SAP_ALL the optional prompt is working, but for a user with limited access, the optional variable doesn't work.
I have already made a RSRT trace with a test user. But I'm not sure what's the problem.
Trace returned:
S_RS_AUTH RC=4 --> BIAUTH=0BI_ALL; type=RF;name=BICS_PROV_OPEN;
But I don't want to give the user 0BI_ALL, otherwise my analysis authorizations for this info object would be obsolete.
Any ideas?
Thx and Regards,
Katharina

Hi Neetika,
thank you for your advice!
I tried the filter without authorziation variable and it was working.
I in addition I tried another option: I defined auth variable as input ready and deleted filter variable and that would work working.
With this setting I recognized that for the authorization variable all allowed values are set as default values! If you execute query with SAP_ALL no default is set, but with limited access the allowed values are set as default.
This may be the problem here. I don't know if this behaviour is by design or if there is a problem with rights?
But now I know where the problem comes from.
Regards,
Katharina

BPC 10.1 Unified Model - Is it a must to have BEx query to create an input form/report?

Dear All,
Have a cube(Unified) created in BW 7.4.
To create an input form using that cube(unified), Is it mandatory that I need a BEx query for the input form/report?
i.e. To create an input form/report in BPC 10.1 Unified environment using a Unified model, is it a MUST to have a BEx query in place? Or, can I create an input form using 10.1 Unified model without BEx query using 10.1 Unified model?
Thank you!
Regards,
Peri

Hi Peri,
It doesn't matter what you include in the rows and what in columns or free characteristics: think of it as a sub-cube of the original cube. You are basically listing Dimensions you need in a group of you reports and can add new measures.
In BPC report you'll arrange them on the screen, format, protect, etc.
So, some of it is a repeat (not all tho), but for different purposes.
Hope this helps,
Gersh

BEx 7 Exceptions not working

Hi experts,
i had a BEx Query in 3.5 that was displayed in BEx WAD 3.5
i have saved the Query in BEx 7 and created a WAD 7
in the query the were some exceptions on a key figure.
in WAD 3.5 on the query or in RSRT the exception works and displayed.
if i run the query (Query Designer 7) or the WAD 7 on the query,
the exceptions does not works and not displayed.
i am working in BW 7.01, SP 10.
and Portal 7.01 SP 7.
Thanks in advanced,
Or.

Hi,
You need to create the exception in portal side.
Status Exception:
This exception affects result cells. This setting is especially suitable
for absolute keyfigures. If you set a dynamic filter for any
characteristic used in the query, the exception will not be applied to
the result cells as the result changes and invalidates the exception
threshold defined. You can always override this behaviour for a specific
characteristic by defining a characteristic context. You can do this in
the query designer itself or in the exception wizard during runtime
(step 5 in the wizard or tab 'Cell Restrictions' in the Query Designer).
Trend Exception:
This exception affects all cells. This setting is especially suitable
for relative keyfigures. If you now set a dynamic filter for any default
characteristic, the exception will be applied to the result cells.
However, if you have defined a characteristic context (Cell
Restrictions) with 'Totals Only' for a specific charecteristic and you
now set a dynamic filter for it, the exception will not be applied to
the result cells.
http://help.sap.com/saphelp_nw70/helpdata/EN/43/21b4cd14cd06f4e10000000a422035/frameset.htm
Thanks,
Venkat

Adding New Fields to a BEx Query does not show up in the CR field explorer

This could be a silly question.
I have a CR report based on a BEx query. I had to add a couple of new fields to the BEx query, and when i want to add those fields to the CR report, I don't see them even after I do a refresh in the field explorer.
How do i see this new fields in the CR report?
Help Please
Thanks

Hi,
you can open the report and go to the menu Database > Verify Database.
that should add the new fields to the list of fields in CR
Ingo

Bex Query is working fine in Bex Analyzer but in Webi 4.0 its not.

Hi guys,
I am using Bex Query as a datasrouce for a Interactive Analysis 4.o. but its giving me the following error below:
Note: i can use other Bex Queries just fine in interactive analysis, and this problomatic query is working fine in Bex Analyzer.
" The DSL Service returned an error: com.businessobjects.mds.services.helpers.OlapUniverseHelper$DimensionsFromCubeFailedException: Cannot retrieve dimensions from cube Commercial Margin
     at com.businessobjects.mds.services.helpers.OlapUniverseHelper.createSapBusinessLayer(OlapUniverseHelper.java:428)
     at com.businessobjects.mds.services.helpers.OlapUniverseHelper.createBusinessLayer(OlapUniverseHelper.java:246)
     at com.businessobjects.dsl.services.datasource.impl.AbstractOlapUniverseProvider.createOlapUniverse(AbstractOlapUniverseProvider.java:62)
     at com.businessobjects.dsl.services.datasource.impl.DirectOlapAccessUniverseProvider.createOlapUniverse(DirectOlapAccessUniverseProvider.java:94)
     at com.businessobjects.dsl.services.datasource.impl.DirectOlapAccessUniverseProvider.provideUniverseFromInlineResource(DirectOlapAccessUniverseProvider.java:82)
     at com.businessobjects.dsl.services.datasource.impl.AbstractUniverseProvider.provideUniverse(AbstractUniverseProvider.java:48)
     at com.businessobjects.dsl.services.universe.impl.AbstractUniverseService.provideUniverse(AbstractUniverseService.java:82)"
Sheikh Hassan Ayub

Hi,
There has been some escalation with regards to similar problem with the early version of BI 4.x.
I would advise you to download the latest version and latest patch in your QA environment and do some testing with the same query.
Regards
Steph

Bex Query Exception Storage

Hi,
we have developed a program that execute queries in background and display an alert to the user according the exception defined in the queries.
At the moment we have replicated all information related to the exception defined in the Bex queries because we didn't find where the system stores the bex exceptions definition.
Is there any table in SAP BW that cointain this information?
We'd like to avoid to replicate the exception information and we want use the exception definition we set in the Bex queries.
Thx

Hi,
Why cant you use standrart reporting agent(till 3.1) or information broadcasting for same..? instead of Program..?
Srini

Transport of Query successful, but changes not appeared in the report

Hi All,
I have 2 Queries(Normal and Total stock reports on the same InfoProvider) in Prd.
For that User asked me to add one characteristic to Free characteristics.
I added one characteristic in Free Characteristics to both Queries in Dev and i collected the Transport requests for both the queries in RSA1->TRANSPORT CONNECTIONS and gave it to basis guy, he transported successfully to PRD and for both the reports the changes reflected in the
query designer, while executed the Normal stock report the characteristic added in free characteristics appeared and while drill down the data is coming, but for the Total stock report the changes appeared in Query designer but on executing the report even the characteristic added to Freecharacteristics is not appearing in Navigation Pane.
Also with the same technical name of total stock report there are 2 reports appearing in query designer. what to do now.
Help me here asap..
Thanks,
Chaitu.
Edited by: chaithu218 on Jun 21, 2011 10:37 AM
Edited by: chaithu218 on Jun 21, 2011 10:40 AM

Hi Chaithu,
As you mentioned that you can see 2 versions by the same technical name in designer for total stock report, it is highly probable that the query you are changing and the query you are executing are different.
2 versions of a query can exist with the same technical name as the system identifies the queries by their UIDs, which would be different for both these versions of queries.Following are the things you need to check:
1) In development system too, do you have 2 versions?
2) In production system, check the UID for both verions of the query
3) In Dev system, make sure you modify the query with UID which is being executed, if it is available there. Else, you need to replace the query in prod with the one you have in Dev system.
2 versions by same technical name can exist if:
1) Someone created a query directly in Prod, and transported a query by same technical name from Dev system
2) or due to system refresh, copy, etc.
Hope it helps.
Thanks,
Abhishek.

Bex Query Exception Not Appearing In Bex Report

Similar Messages

Maybe you are looking for