BEX query: filter is not displayed in one of the users

Hi,
We created a BEX Query with a Month/Year filter.
When I run the query with my user, it's working ok (photo 2).
When I run it with another user, the filter is not dislayed (photo 1).
I've checked the role with PFCG, bit i don't know what it's misssing. The infoarea, infocube and name of the query are included in the PFCG, as well as the activities: execute, visualize, etc. (Photo 3).
Any ideas?
Thanks in advanced!!
Florencia

Hi,
Just compare assigned roles for My user and other user.
Then you may know the missed authorizations.
As my guess your issue will authorization related one.
Thanks

Similar Messages

BEx Query particular cell not display

Hello Experts,
Whenever I execute the query all the results are displayed but only one cell not display.
Could you please tell me, anyone explain this scenario?
Thank you,

Hello Gupta,
whenever i execute the query the selection appeared if i put the selection year 001/2009 the results is appeard. but the selection year 002/2009 is not displayed in a particular cell. I don't know about the cell editior. can you tell me, how can i check it...
Let me know, if any problem in authorization.
Thanks for your reply.
Regards
Sathis

Time Machine did not back up one of the user accounts

Hi All,
I just notice that time machine stops backing up one of my user accounts. So I created a new admin account to test it and that new account was backed up. I did turn on File Vault. I am using Lion 10.7.3. Thanks for any advice!!!

FanApple wrote:
Hi Pondini,
Thank you for your reply. I am not transfering from SL to Lion.
So you have File Vault 2 turned on, not File Vault1, correct?
Time Machine no longer back up one of my accounts. Time machine used to back up that account but not any more.
That sounds like either it's been excluded, or the preferences file (where the exclusions and other things are kept) is corrupted. Try a "full reset" of Time Machine, per #A4 in Time Machine - Troubleshooting.
I think I changed on/off local snapshot for time machine back up by running sudo tmutil disablelocal/enablelocal l don't think that would effect my time machine behavior.
No, that won't change what is or isn't backed-up.
So l launch Migration Assistant and Migration Assistant dosen't recognize my external TM backup. It shows my hard drive and a network drive (Time Capsule).
That display is misleading: if it shows a yellow or green icon and the name of your Mac and HD, instead of the name of the drive the backup are on, those are your backups.
If not, the backups may be damaged. Try to repair them, per #A5 in Time Machine - Troubleshooting.
Or, if you excluded System files and Applications from backups, they won't show up there at all.
Now I am thinking of deleting my account and creating it again and try to back up with time machine and see whether it would work or not and roll back my TM backup .
Don't do that. You risk losing everything that way!

Data not display in one of the field of Multiprovider

Hello Gurus
I am using two cubes 0PY_C02 and ZIC_DESG and create Multiprovider ZMPAYDESG.
The Characteristics of ZMPAYDESG are 0EMPLOYEE,0PERSON,ZHRDESG,0COUNTRY_ID,0WAGETYPE.
Time Characteristics of ZMPAYDESG is 0CALMONTH.
Key Figure of ZMPAYDESG is 0Amount.
I checked Identification.
Now my problem is the values in Deminsion are there for Desg. But when I run the query vlues for desg show #.
Does anyone have the idea what might be the reason?
Thanks and regards
Minaxi Shah

Hi Anil,
Thanks for your quick reply. Really you are guru of BW.
Sir, I add Desg in infocube 0PY_C02 and activate it. But I don't follow regarding update rule of infocube of 0PY_C02.
Could you give me clear picture regarding this.
Thanks in advance and reagrds,
Also congratulaion for getting lot of points.
edited
Hello Anil,
I am little bit confuse. Please clear it.
1) when I create a multi provider ZMPAYDESG using cubes 0PY_C02 and ZIC_DESG. I have to add Zdesg infoobject in 0PY_C02 cube and then activate the update rules ?
or
2) Drop down the idea of multi cube and enhance 0EMPLOYEE_ATTR AND load the data in 0EMPLOYEE. and add zdesg in 0py_c02 and activate both ic and update rules?
Please reply.
Minaxi shah
Message was edited by:
Minaxi shah

Bex Query Filter Page in BSP - Urgent Please...

I have seen many threads about Bex query in BSP, but can any one tell me how can i display the default Bex Query Filter page in BSP.
I created a query in Bex Query Designer and added few filters and when i execute i get a popup where i can enter the input values for which the report would be generated, can i get the same functionality or similar functionality if i have the same Bex query in BSP.
Also apart from the filters specified in the Bex, all the columns displayed in the report appears in the filter section how can get the same functionality BSP.
Note: I do not want to use Bex Web Application Designer
Please tell me the steps for the same.
Atleast please give me the steps at a high level. Please...

Hi,
1. Create a CKF, inside the CKF window create a new Formula Variable --> Right click in left side window on var and say create new Variable
2. Create new variable of replacement path type and reference Characteristic as the TO DATE value which you want to be max.
3. Now drag this new created var to CKF and save.
4. Now create condition with follwoing deatils:
Key Figure Operator Value
Max Date(CKF) TOP N 1
Save and execute your query. This will give you max value for the To Date field.
Hope it works .
Regards
Raj Rai

Sub query filter may not reference current Report

Hi,
I've 2 reports, i'm calling one from the another report by navigate methode(Column Propertives--> Value-->Navigate). 2nd report is having narrative veiw in title of the report .
Getting Error:
Sub query filter may not reference current Report

hi,
have u seen this ?
http://siebel.ittoolbox.com/groups/technical-functional/siebel-analytics-l/issue-with-drill-down-1710714
thanks,
Saichand.v

Error on running BEx Query: Variable does not exist or is incorrectly used

Hi all,
I have a characteristic in my query which I restrict using a variable with Mutliple Single values.
When I run the query in the Analyzer or RSRT, I get the following error:
"Variable does not exist or is incorrectly used"
Please help me fix this error.
Thanks and Regards,
Srilakshmi B

Hi,
I have a characteristic in my query which I restrict using a variable with Mutliple Single values.
When you define any Filter Values, BEx will ask you to select either Single Values or Variables or Value Ranges etc..
If you want to select by Multiple single values, you should include all the values in the Restriction area.
Please do not define any variables, unless the User wants to enter any thing. Look for any other variables which are not defined correctly..........
Regards,
Suman

CM14 BI Publisher - modifying an existing Data Model, the Graphic View in Query Builder does not display

I am trying to edit the default forms/reports that come with CM14, trying to edit the data model, data set, (to get to the old Infomaker style graphic view) , the Query model does not display (error the list of tables is too long..) Oracle tell me the limit is 60, there are not 60 tables referenced in any CM report.
Does this Query builder view work at all on any report?
(bigger question, we are moving from CM12, should we move to CM13 which works with infomaker?)
Thanks,
Paul L

Kurt, thanks for your replies.
A couple of notes/clarifications.
1. You are correct that BI works better in Firefox--I have observed issues with the BI display when using IE. I would recommend using Firefox too.
2. You are correct about the way to get to the Query Builder to see a graphical view of data tables. There are basically two issues with this that I mentioned, but will re-iterate:
a. If you have an EXISTING query in the data set, then click the "Query Builder" button, this will remove the existing query that's there, it will NOT display the existing query in the query builder. Query Builder works only to create a NEW query from scratch.
b. Query builder is limited to selecting 60 fields max in your query. If you are creating a large report with many tables, you may find that 60 fields is not enough. For that you will have to work in the SQL edit screen rather than using the query builder.
I would impress on anyone developing CM14 reports that they become familiar with the database schema and relationships to avoid problems when developing your BI reports. You should be able to find the tables and joins documentation in the knowledgebase.

I have a problem with my iPhone 5 stopped working the sleep / power and simultaneously refused to obey the HOME button. I can not use either one or the other. I can not enable or disable the device, display lights up when you plug the charger. same displa

I have a problem with my iPhone 5 stopped working the sleep / power and simultaneously refused to obey the HOME button. I can not use either one or the other. I can not enable or disable the device, display lights up when you plug the charger. same display works fine as it is surprising. or maybe someone knows what is the reason for this? is there any way to solve this problem?

More than likely its a hardware issue, I have never encountered such a problem and best bet is to just go get it replaced. If you have insurance on your device apple will replace it as long as there was no water damage, if you dont have insurance they will charge $200 more or less. Hope you get it fixed

How do I change the name that is displayed as one of the main folders on finder?

I cannot figure out how to change the name that is displayed as one of the folders (in the red circles in the picture). It currently has my dad's name because he set up the computer but he does not use it and I wanted to try and change the name to my own. I have tried system-preferences/users-&-groups and made changed the admin to my own name but that did not change the folder name. And when I clicked the "unlock to make changes" on the folder menu (left window in the picture) it did not allow me to change the name. Any ideas?

That is your admin account on the computer. Simple solution:
Create a new admin user account to your liking. Log into that new account then delete the old account.
See also this article.

Help!!! How to make quicktime plugin do not display on top of the web page?

Any one knows how to make quicktime plugin do not display on top of the web page??? I've tried to change the zIndex property using javascript, but it doesn't work.
Because we have some widgets which are required to be moved to anywhere on the page, we use iframe to implement that, so it can display on top of quicktime plugin, but the plugin flickers sometimes when we do some operation on the widget which is on top of it.
Anyone can helps me? Thanks in advance!!!
Windows XP Pro

> Can you tell me how to set the script so that the
lightbox image is
> displayed
> on mouseover instead of mouse click.
Check the docs. Trent is usually very thorough in his
instructions.
Hint: I haven't studied it but it probably involves modifying
one of DW's
built-in Behaviors.
Walt
"ducati1" <[email protected]> wrote in
message
news:gkb906$qrd$[email protected]..
> Wow that DW extension is just what I needed.
> Thanks..
> Can you tell me how to set the script so that the
lightbox image is
> displayed
> on mouseover instead of mouse click.
> I currently have the thumbnails set to insert the ALT
text into a text box
> on
> mouse click.
>

HT201250 The back ups are not displaying when i enter the time machine

I'm trying to restore my files to my new MacBook I just purchased. I have the external hard drive connected and entered the Time Machine. But, the back-ups are not displayed "in pink on the right side" as indicated in the directions. I do see the back up folders when I open up the hard drive using Finder. Any ideas on how I can restore my files?
Thanks

You should be using Setup Assistant to import your data, as detailed here:
OSX Tips: Setting-up a new Mac from an old one, its backups, or a PC Using Setup Assistant on Lion

How do I delete one of the user accounts on my computer and not lose the data in that account?

How do I delete one of the user accounts on my computer and not lose the data in that account?

I actually have the opposite of this problem. haha.
https://discussions.apple.com/thread/4484354

"USB Device Not Recognized. One of the USB devices has malfunctioned..."

I'm running Windows XP with external hard drive. When hard drive is connected, iPod will not sync and I get message stating "USB Device Not Recognized. One of the USB devices has malfunctioned..."
When disconnect the external drive, he iPod appears in My Computer. However, iTunes is on external drive; therefore music is not syncing onto iPod. I've attempted the 5 R's as well as searching for iPod in Device Mananger. When iPod is conncected, it is listed in Devce Manage as "Unknown Device."
I've changed drive letters on boh iPod and external drive and get the same message. Please help.

QRe: Zen MX Causes "USB Hardware has Malfunctioned" Msg from Windows XpyUhh, Yes.
I used to same cable to attach my Motorola Razr and the computer correctly found it and identified it as such.
I also tried another cable (brand new) same thing.
I went to recovery mode and did a "CLEAN UP" but no dice.
I also got my I.S. tech guy to look into it and on the USB page it say "UNKNOWN DEVICE"? when he tried to delete it it did not help, it just reappears as "UDVC"? Also in looking into it it seems to have no drivers.
He came to this site and tried to do somethinm through here but it did'nt work.
Now in listening to it last night it began to 'skip' or what I call 'HICCUP" terribly. Where a song starts and stops, during the middle of it. ? It's always done it a little but it has been getting more and more common and now? It's WAY worse about it.
It has never been dropped, or nishandled in any way. I bought the clear hard case to protect it. And only has about 300 songs on it. Never used for anything else. No vids no pics, nothing.

I connect my Macbook 13" to my thunderbolt to display on my HD television but it keeps asking for a KeyChain password for "user-hp". My key keychain password is nothing but it does not want to accept and not display my screen to the Television. Suggestion

I connect my Macbook 13" to my thunderbolt to display on my HD television but it keeps asking for a KeyChain password for "user-hp". My key keychain password is nothing but it does not want to accept and not display my screen to the Television. Suggestion

Apple support article:
Mail Keeps Asking for Password
Maybe this will help. If you monitor the "More Like This" box (top right), other threads appear. Opening them usually displays other threads.
https://discussions.apple.com/message/20549403#20549403

BEX query: filter is not displayed in one of the users

Similar Messages

Maybe you are looking for