Bex Query help !!

Hi Guyz,
I am new to planning so need a question,
I want to create a planning solution for one of my client and his requirements are like
1- If figures are entered on yearly level, the data is distributed based on prior year data.
2- If there is no prior year data for distribution the equal distribution over 12 months is used
Can some one plz explain how to solve this prob in query designer or any other recommended solution....
Kind Regards,
Jay

thnx for reply
in first we can also use it as input ready query and disaggregate the entered value and analog distribution with reference to following structure ... em i right ??
and about second condition, it means that as it was said in first option to use the prior year data but for example prior year data is not available then distribute the total in to equal distribution over 12 months,
is there any solution or kind of ''if condition' which will check if the prior data is available that copy paste to next and if not the equally distribute ...
is it possible ?? if not then what else cud be ?

Similar Messages

  • BEx Query Help   How to restrict  Organisation Unit  Like 'D%'    in Bex

    Hi all ,
    In a cube i have a columb   ORGUNIT     which is having Values from
    A_152,
    A8373 ,
    D_983,
    B_0293,
    C09 ,
    D6653 .
    In bex Query Designer I want to restric that infoobject  & organisation unit which is starting with 'D' .
    means  output will be   :  D_983 ,
                                            D6653
    ABAP statement    for this             ORGUNIT  LIKE 'D%' .
    how we do same in BI restriction .
    Thanks Regards
    Sanjeev Kumar
    Edited by: skarya2003 on Dec 6, 2009 9:01 AM

    Hi,
       Try using customer exit .
      chk out this doc which helps u,  http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/90f8b363-882d-2c10-ea91-9f08ce4c658a&overridelayout=true
    Regards,
    Priya.

  • F4 help on Bex query selection screen

    Hi,
    On the selection screen of a particular field of  Bex query , if the user selects F4 help (input value help), typically it picks up all values in the infoprovider for that field.
    Is there any way to retrict those values.
    Eg : Cube has values A, B , C for field A .
    When the user selects value help on field A of the Bex query written on the cube, the requirement is to show only A and B.
    thanks.

    Hi,
    We do this in our project:
    you can use BW Reporting Variable type Auth Exit.
    In the Step 0, you define what are allowed for that user. It will then automatically show only auth.zed values.
    Best Regards,
    Suan Liono.

  • Need your help !!! -- Authorization error for Real-Time Bex query

    Dear experts:
    I have a Bex query built on a multiprovider, this multiprovider is consist of one standard cube and one real-time cube(virtual provider). When I run this query, I can retrive the data and no error occured, but when others execute this query, they will get the error message below:
    Operation Generate a Request could not be carried out for DTP DTP_D7JVT8DGBQWPWL13VIUITNODG
    You do not have authorization for the data transfer process
    Errors occurred during parallel processing of query 2, RC: 3
    Error while reading data; navigation is possible
    Row: 54 Inc: WRITE_MESSAGES Prog: CL_RSDR_AT_QUERY
    I used tcode rsecadmin to track the authorization, when I execute as user XXX, I can get the same error above, but when I go to "Display Log", no error showed there.
    Did anybody meet the same error before? How to resolve that?
    Any post would be appreciated and thank you all in advance!
    Tim

    I think there is some missing authorization,here
    the user has no access to execute the DTP.
    You can analyse it in rsecadmin or also see
    which object you are getting in su53.
    Thanks,
    Saveen

  • IF and ABS condition statement in BEX query designer

    Hi,
    I would like to ask the best way for me to produce an acceptable result from Excel IF and ABS Condition statement.
    The condition statement that I have on my Excel file is
    =IF((A2-B2)>0,ABS(A2-B2),0)
    I'm trying multiple times to reproduce this in BEX Query designer, unfortunately I'm getting a bad result or unacceptable formula.
    Anyone who could help me with my issue?
    Thanks,
    Arnold

    Hi Arnold,
    Thank you,
    Nanda

  • Status of data in Bex query shows wrong date

    Dear Experts,
    The Bex qurey after sucessful execution, show the Status of data as old date i.e. feb 2012. but we observed that the data uplaod happens regularly and sucessful.
    we tried executing the same query using RSRT/Bex Analyzer/Portal. the results are same i.e. showing incorrect status of data.
    Note: The Bex query is built on BI Infoset which sources from DSOs and Master Data infoobjects, and  BI version is 7.0.
    Kindly please help for resolving the issue.
    Best Regards,
    Mannu.

    Hi Vijay,
    The data upload has happend today also and it is sucessful, the reporing status is available for requests from respective infoproviders.
    'Status of data' is not a filed. if it an information to tell the status of data in query result.
    Please find the following steps to find the 'status of data'
    go to RSRT->give the query name and execute-> now after query results-> go to last page-> you can find the 'status of data'.
    Best Regards,
    Mannu

  • Message in BEx Query Designer Formula

    Hi Experts,
    I need to display message based on the value of the formula result. For Example:
    If K.F1 =<2.5 Then <Message: ODD>
    ElseIF K.F1 >2.5 Then <Message: Even>
    Else
    <Message: Determine the value>
    EndIF
    Thease above messages would be build in the formula column of BEx query designer
    Thanks and really appreciate your response.
    Regards,
    Waseem

    Hello,
    I have done the same funtionality with the help of workbook.
    May be experts can guide us how to display  messages in the formula column of BEx query designer.
    Thanks.
    With regards,
    Anand Kumar

  • Drilldown in BeX Query Designer

    Hello,
    I am new in SAP. I am having problem creating Drill down. I have this report where all the data is Transactional data. So I haven't created any Master Data. So I won't be able to use Navigational Attribute for Drill down purpose and I don't want to use Hierarchy. Is there any possibility of getting the Drill down in BeX Query Designer? Any help will be appreciated.
    Warm Regards,
    Debayan

    Hi Debayan,
    first of all, what is your requirement to create a drill down?
    A drill down in BEx query means showing additional information from report output. There are 3 ways to drill down a query in BEx
    1. Master data-Navigational Attributes
    2. Master data- Hierarchies
    3. Free characteristics
    As you dont have any master data in the report (which is very strange) you can use the additional characteristics provided in the 'Free characteristics' to see how the drill down works in BEx.
    Please share your exact requirement.
    Hope this helps.
    -Swati.

  • Options in Assignment of Condition in BEX Query Designer

    Hi Experts,
      I am trying to define a condition in BEX Query Designer.
    I defined my condition and bit confused with Characterstic Assignment
    What Happens if is select 9What is the difference)
    1) All Characterstic in the Drilldown Independtly
    2)Most Detailed  Characterstic Along the Rows
    3)Most Detailed Characterstic Along Columns and
    4)Individual Chars and Chars.Combinations
    Thanks

    hi,
    chk the link
    Query creation
    http://help.sap.com/saphelp_nw70/helpdata/EN/f1/0a5625e09411d2acb90000e829fbfe/content.htm
    http://help.sap.com/saphelp_nw70/helpdata/EN/42/d21c1f46076bb2e10000000a1553f6/content.htm
    Ramesh

  • In Bex Query designer - Flat is not supported

    Hi all,
    In Bex query designer,
    While execution of the query, the following error is coming .
    Failed to process request; contact your system administrator
    Error Summary
    Exception occured while processing the current request; this exception cannot be handled by the application or framework
    If the information on this page does not help you locate and correct the cause of the problem, contact your system administrator
    To facilitate analysis of the problem, keep a copy of this error page Hint: Most Web browsers allow you to select all content, and copy and paste it into an empty document (such as in an email or simple text file)
    Root Cause
    The initial exception that caused the request to fail was:
    Flat mode is not supported!
    java.lang.UnsupportedOperationException: Flat mode is not supported!
    at com.sap.ip.bi.bics.dataaccess.consumer.impl.selector.Characteristic.setHierarchy(Characteristic.java:330)
    at com.sap.ip.bi.bics.dataaccess.consumer.impl.selector.Characteristic.readStateFromDomNode(Characteristic.java:542)
    at com.sap.ip.bi.bics.dataaccess.consumer.impl.queryview.QvCharacteristic.readStateFromDomNode(QvCharacteristic.java:379)
    at com.sap.ip.bi.bics.dataaccess.consumer.impl.queryview.QvStructure.readStateFromDomNode(QvStructure.java:106)
    at com.sap.ip.bi.bics.dataaccess.consumer.impl.selector.AttributeContainer.readStateFromDom(AttributeContainer.java:297)
    Details: Full Exception Chain
    Most important error.
    regards
    Selvan

    Hello,
    I have the same problem with Flat mode is not supported! at ... Characteristic.setHierarchy(Characteristic.java:335):
    Open, close, reload of the query does not help.
    Other SDN-thread "500 Internal Sever - Flat Mode is not Supported!" related to transaction RSRT.
    Execution of query via RSRT works, but the problem still persists in the BEx Web Analyzer.
    Could be related to a BEx Web Analyzer "bookmark" ("Personalize Web Application").
    I have not deleted any item. We use SAP BW 7.0 with a patch level approx. 09.2009.
    The "flat-mode" seems to be the  "BEx table mode".
    SAP hints do not seem to fit here:
    - 715820 BW 3.x Front-End Patch 14 (we use BW 7.0)
    - 874825 SAPBWNews for BW 3.x Front-End Support Package 19
    - 874827 SAPBWNews for BW 3.5 Front-End Patch 08 (we use BW 7.0)
    - 905229 update to SAPTableTree
    - 909824 Termination in flat mode when an object is deleted (old?)
    - 909827 Incorrect InfoProvider-dependent characteristic values
    - 910602 Condition includes too many characteristics (usage of deleted elements)
    - 915215 Termination when a query definition is changed (old? visibility of elements?)
    - 968273 Cache with flat files: Exception is not caught (does not apply to given error)
    Any new solutions?
    Best regards
    Thomas

  • Condition (Defintion) in BEX Query Designer

    Hi Experts,
      I am trying to define a condition in BEX Query Designer.
    I defined my condition and bit confused with Characterstic Assignment
    What Happens if is select 9What is the difference)
    1) All Characterstic in the Drilldown Independtly
    2)Most Detailed  Characterstic Along the Rows
    3)Most Detailed Characterstic Along Columns and
    4)Individual Chars and Chars.Combinations
    Thanks

    Hi,
    <b>● All Characteristics in the Drilldown Independently</b>
    This setting allows you to apply a condition in a general way. Depending on which characteristics you use in the drilldown, you obtain different results.
    Note that the characteristics that are already used in an active condition for characteristic combinations are not included.
    This option is optimized for ranked list conditions, but can also be used for threshold value conditions with relative values.
    <b>●Most Detailed Characteristic Along the Rows or Columns</b>
    This option is optimized for threshold value conditions. The condition is applied to the most detailed characteristic of the rows or columns.
    Note that this function is not supported when executing the query in the BEx Analyzer. For more information, see Restrictions in the BEx Analyzer.
    <b>● Single Characteristics and Characteristic Combinations</b>
    This setting allows you to evaluate the condition for characteristics or characteristic combinations defined for specific drilldowns only. You can select any characteristic (of the characteristics used in the query in rows, columns, or in the free characteristics) or a characteristic combination.
    ○       If you only want to evaluate the condition when a certain characteristic is present in the drilldown, select this characteristic.
    ○       If you want to evaluate the condition for characteristic combinations, select multiple characteristics.
    Source:
    help.sap.com
    For more information and examples please check the following link:
    http://help.sap.com/saphelp_nw70/helpdata/EN/73/702e39074dc93de10000000a114084/frameset.htm
    Hope it helps.

  • Values Bifurcation in BEx Query Designer

    Dear BI Gurus,
    In a column we are getting both positive value and -ve value. We want to bifurcate the values and show only +ve value in one column and show -ve value in another column. Is it possible through Bex query designer?
    Please through some light on this issue.
    With Regards,
    Balachander.S

    Hi bala,
    This can be achieved by creating two calculated Key figures, Just use else if condition in the formula and use if KF1=KF>0 then KF else 0, here all the positive values will be displayed similarly use if KF2=KF<0 then KF Else 0 it will display all the negative values. But here all the values will be displayed. Just hide the Key figure and display only calculated keyfigures. Else you can use exceptions to differentiate the positive and negative values.
    Hope this helps.....
    Rgs,
    I.R.K

  • Constant Selection in BEx Query Designer on BI7

    Hi guys
    According to this blog <a href="/people/prakash.darji/blog/2006/09/19/the-hidden-secret-of-constant-selection Selection</a>, we can create constant selection on both Characteristics and Key figures. I understand how to do it with restricted key figures.
    Can anyone give me a step by step guide on how to create constant selection for a Characteristic in BEx Query Designer on BI7. I can't find options for 'constant selection'
    Or is this the same thing when you include or exclude values?
    Message was edited by:
            jimi ogun

    Thanks Krishna
    I am actually using a Multiprovider for my queries but business requirements mean I need to create joins.
    I am trying to avoid Infosets and I believe another way is to use the Constant Selection feature in Query Designer.
    Going back to my previous posting, I know how this is done with a restricted KF but I don't know how when it comes to characteristics.
    Can anyone help?

  • Infoprovider documentation in BEx query designer

    Hi Experts,
    While users creating queries in BEx query designer (BI7) they have to see the predefined documentation about that inforprovider. Can we achive this requirement?
    What is the use of "Documents" in BEx query designer? Can we show the documentaion under this area?
    Thanks in advance.
    thanks and regards,
    Raju

    Hi,
    Plese go through these links which provides you detailed view on Documnet Navigator and Creating/Editing Documnets in it
    Business Document Navigator :[http://help.sap.com/saphelp_nw70/helpdata/EN/dd/f5253715dfb808e10000009b38f889/content.htm]
    Creating New Documents:[http://help.sap.com/saphelp_nw70/helpdata/EN/df/77ff72021311d3ae4b0000e82deb58/content.htm]
    I hope this helps you.
    Regards,
    Rajknadula

  • Creating Restrictions in BEx query designer for (1-a), where a is variable.

    Dear All,
    >>  Suppose for the variable in the BEx query designer, I've created restriction for 0FISCPER to the variable 0P_PER (as 0P_PER-1) by right clicking 0P_PER3, from that a dialog box appears.  In that I've selected 0P_PER3 and then clicked on offset variable and when I set the offset variable, it works for (0P_PER-1.etc, 0P_PER+1,etc..)
    But if I want to have (1-0P_PER), then plz tell me how to define this restriction?
    Plz explain me the steps to perform (1-0P_PER) restriction in BEx query designer in BW1.
    I'm using SAP BI 7.2 gui.
    Expecting your reply soon,
    with Regards,
    Jerald

    My requirement is that I want to have " 1-fiscal year"., But this I could not define using offset variables, since using offset we can define "fiscal year +1" or "fiscal year -1". 
    So there would be some other way to define "1-fiscalyear".  So Please help me to define "1-fiscalyear"  by giving me the steps.
    Thank you,
    with Regards,
    Jerald

Maybe you are looking for

  • Get certifcate for https site in BHO

    Hi guys, How can i get certificate for https site in BHO to do some further verification? Thanks Herb

  • Show bpm column in music list?

    I have a list of songs that I'd like to sort by bpm (I have already added the bpm info via another program).  Is there any way to sort by bpm (or tempo)?  Its not an option in any of the column options but I would think this is something that would b

  • Input template enter a Year value and spread values out across

    my templte is as follows: GL codes down the right ( Got that) Company codes across the top (got that) what I want to happen in the ensend - is the values being entered to be divided by 12 and sent to each month. basically the guy is going to enter a

  • Adobe Flash Player not working on Toshiba

    I have no idea what happened! About 3 days ago my Adobe Flash 9 was working fineon all the websites such as Photobucket, Youtube, and more! But I started getting risks & threats on my computer so I didnt didnt use this laptop til the next day, when m

  • How to separate RAW+JPG after import?

    Greetings: Is there a way to separate jpg files from a collection of RAW+JPG images after import?  They were imported without checking the "treat raw + jpg files separately" box in preferences.  Having worked with them, I would like to simply separat