BEx Query Hierarchies not visible to Universe

Just created my first universe against an SAP BW query which is released for OLEDB for OLAP. I am very comfortable with BW, but new to BO. Have worked with Cognos against BW also.
Issue: Created universe against a query which contains Cost Center and GL Account. Both have several hierarchies defined in BW. Execution of the BW query and also executing the BAPI function GETHIERARCHY on the BW side works fine and all hierarchies are visible, however the universe does not show the hierarchy. Does anyone know why it did not read it? It can see other objects of the query fine, except the hierarchies.

Hi,
Characteristics and hierarchies in SAP BW are generated as a collection of classes and objects in the universe.
In fact hierarchies are flattened in the universe and only the levels are generated and consumable.
Can you see any of your hierarchy in the universe? A hierarchy level surfaced in a business object has a definition like this: [Characteristic_key+Hierarchy_key].[LEVELxx]
If you are not able to see them, can you describe a bit more what is generated in the universe?
Didier

Similar Messages

  • BEx Query Output Not Visible on the Dashboard.

    Hi All,
    I have a Dashboard which include 2 BEx Queries in it. When my end-user displays the Dashboard, he is able to see the result of one BEx Query and there is no result on from the second BEx Query. Both the queries are from same InfoCube and relevant authorizations have been provided to end-user.
    Now, when I run the Dashboard, I am able to see both the Queries output on the Dashboard. I am sure, its must be some authorization issue, but I have provided all authorizations needed which were suggested by SAP to my end-user and the fact that they can see the result from one query and not from other confuses  the things.
    Would appreciate some inputs...
    Thanks,
    Mahesh

    Now I did the further investigation using ST01 and guess what are checks were green..the authorization objects checked were below...
    S_RFC
    S_RS_COMP
    S_RS_COMP1
    S_RS_ICUBE
    S_RS_RSTT
    S_RS_XCLS
    I would really appreciate some suggestions, should I open a SAP message or am I missing something...
    Thanks in advance...
    Mahesh

  • Custom Filter in Universe on top of BEX Query is not working in BO Explorer?

    Hi,
    I have created Condition(Filter) for an Dimension Object "Submitted by Group Hierarchy" in Universe designer tool on top of SAP BEx Query and then exported the universe to Repository.
    <FILTER KEY="@Select(Submitted By Group Hierarchy\L01 Submitted By Group Hierarchy).[TECH_NAME]"><CONDITION OPERATORCONDITION="InList"><CONSTANT CAPTION="@Prompt('Submitted By Group ','A',' Submitted By Group Hierarchy\L01 Submitted By Group Hierarchy',multi,primary_key,,{‘Direct Sales’)"/></CONDITION></FILTER>
    To test my custom filter , I have created WEBI report and its allowing input entry in my custom filter and output is also coming .
    where as in Explorer, i am not able to enter input values for my custom filter as below.
    Can anyone suggest me how to create custom filter in universe and use it in explorer.
    Thanks in advance.
    Regards,
    Ramana.

    Hi Ramana,
    Please try using 'mono' in place of multi in @prompt syntax and then test.
    Regards,
    Pranay Sharma

  • Bex Query is not working in portal

    Dear Experts,
    i have uploaded BI master role into portal, By default Bex Queries are assgined to Master Role. when I clcik on preview for particular Bex Query, it's working fine. but after assigning the master role to end user, that same Bex Query is not working. it's showing Below error..
    Portal runtime error.
    An exception occurred while processing your request. Send the exception ID to your portal administrator.
    Exception ID: 05:22_18/08/10_0002_7116150
    Refer to the log file for details about this exception.
    please give me suggetions...
    Regards,
    VENU

    Hi Venu ,
    Can you please check the logs for details -  http(s):<host>:<port>/nwa . This may be a permissions issue . Check if the iview has read permission for everyone group and then test . Also post the error details here .
    Regards
    Mayank

  • Bex Query is not refereshing in analyzer..

    Hi Experts,
    I am having a issue  bex query is not refreshing in the bex analyzer.
    Actually my requirement to create a workbook on bex query. I have made once workbook but that also not refreshing .
    I already check the tick mark for refresh workbook on open,
    Please help.

    Hi,
    Refer below screenshot and check it, since I don't have enough screenshots/steps to reproduce. It is just a guess, so check on below points and respond.
    1. Is workbook is connected to system? check the connected/connection by clicking on icon (marked in purple). If it is connected, then proceed to next step.
    2. Are you clicking on 'Refresh' button (marked in red)? and saying variable screen is not appearing OR report is not refreshed? If yes, then proceed to next step.
    3. If you want to refresh and input value again, then click on 'Change Variable Values' Icon (marked in green).
    Hope it gives you steps to identify root cause.
    Thanks,
    Umashankar

  • BEx Query is not shown

    Hi Experts,
    I am facing problem  in creating universe on SAP BW BEx Query, here the problem: SAP BW version is 7.0 SP 11 and BusinessObjects version is XI 3.0 and SAP Integration Kit 3.0
    I created a new InfoCube in SAP BW under some InfoArea and I created a BEx query on that InfoCube. Now in Universe Designer i am trying to create a new connection on that BEx query, but in the list of objects while creating connection i can see my InfoCube under folder $InfoCube but i can not see my own InfoArea or even Query i created on that InfoCube. Along those i can see some folders like Sales Overview (0SD_C03) and BEx queries under that folder of target 0SD_C03. My doubt is why it is not showing InfoArea and Query which created in BW.
    Could anyone please help me in this.
    Thanks & Regards
    Ramakrishna Kamurthy

    Hi
    in the SAP query designer please go to the Properties window of the query, select the Advanced tab and check the Allow external access option. Save your query and retry.
    Regards,
    Stratos

  • How to use SAP BEX query Free characteristics in BO Universe?

    Folks,
    I have a BEX query which has lots of objects listed under free characteristics.
    When I create a Universe these objects are not brought in the Universe.
    Is there any way to bring those objects into our Universe?
    Thanks
    Bashir

    Hi,
    take a look here:
    /people/ingo.hilgefort/blog/2008/03/24/businessobjects-and-sap-part-5
    Ingo

  • Optional BEx query variables not working in WebI

    Hi,
    I have an Webi report based on Bex Query using BICS connection.
    One characteristic is restricted with two variables. First an authorization variable and additional with an input ready variable.
    This input ready variable is optional. When it comes up in webi and you choose a value it doesn't filter on it.
    We are on BO 4.1. SP3 and BW 7.31.
    With SAP_ALL the optional prompt is working, but for a user with limited access, the optional variable doesn't work.
    I have already made a RSRT trace with a test user. But I'm not sure what's the problem.
    Trace returned:
    S_RS_AUTH  RC=4 -->  BIAUTH=0BI_ALL; type=RF;name=BICS_PROV_OPEN;
    But I don't want to give the user 0BI_ALL, otherwise my analysis authorizations for this info object would be obsolete.
    Any ideas?
    Thx and Regards,
    Katharina

    Hi Neetika,
    thank you for your advice!
    I tried the filter without authorziation variable and it was working.
    I in addition I tried another option: I defined auth variable as input ready and deleted filter variable and that would work working.
    With this setting I recognized that for the authorization variable all allowed values are set as default values! If you execute query with SAP_ALL no default is set, but with limited access the allowed values are set as default.
    This may be the problem here. I don't know if this behaviour is by design or if there is a problem with rights?
    But now I know where the problem comes from.
    Regards,
    Katharina

  • Bex Query Designer not using default browser

    hello all, i have disabled my Internet Explorer from being my default browser, however, when i use the Bex query designer and test, it initiates my Internet Explorer, and not my default Safari browser.
    does anyone know where this setting is made ?
    thanks
    g

    Skype uses IE ("Internet Explorer") as the browser interface on Windows based systems, this currently includes many windows such as the logon screen and add Contacts screen. This is fairly normal when a program uses browser logic internally, it is not changing what you use as a default browser.
    About Me You can also use a IP Camera as your camera for Skype video Example Instructions

  • Bex Query Exception Not Appearing In Bex Report

    I have a created an exception in a Bex Query and built a report using the Bex Report Designer. But the exceptions that work fine in the query dont seem to work once I've embedded the query in a report. Is this right? is it not possible to use exceptions in a report or do I need to turn something on etc?
    Any help much apreciated.

    Hi Joel,
    Pls refer the OSS # 331772 reg. this limitation. Exceptions if applied will not be dynamic in RD.
    Report designer is a flat structure. You cannot collapse or expand the static columns. Hence, Conditions/Exceptions are not supported in Report Designer. You may try alternatively in WAD. It will surely work in WAD for formatted web based reports.
    Thanks,
    Arun Bala

  • BEx Query results not getting updated

    Hi,
    I am using a BEx Query based on a multiprovider which is fetching data from a multiple remote cubes and multiple regular cubes.
    Now when data in the source system is getting changed the corresponding remote cubes are getting update but query result are not getting re-fresh for at least 2 hours.
    We have already tried doing logging out and and logging into the bex system.
    Is there some cache setting which is required?
    Default cache mode in query is  'Main memory cache without swapping'.
    Kindly advice.
    Regards
    Vivek

    Hi,
    Just generate your query once with program RSR_GEN_DIRECT_ALL_QUERIES.
    By selecting your multiprovider .
    Thanks,
    Ranjan

  • Adding New Fields to a BEx Query does not show up in the CR field explorer

    This could be a silly question.
    I have a CR report based on a BEx query.  I had to add a couple of new fields to the BEx query, and when i want to add those fields to the CR report, I don't see them even after I do a refresh in the field explorer. 
    How do i see this new fields in the CR report?
    Help Please
    Thanks

    Hi,
    you can open the report and go to the menu Database > Verify Database.
    that should add the new fields to the list of fields in CR
    Ingo

  • Using 2 BEx query structures - Not displaying as a hierarchy

    Gurus,
    I have CR2008, and I am using a BEx 7.0 query that has 2 structures.  One structure is key figures, the other is a layout that I turn on and display as a hierarchy.  There is cell definition behind the query.
    How can I get this second structure to view as a hierarchy in Crystal?  The cell definition is calculating correctly in Crystal, however all of the Profit Centers show on the same line, without indentation.
    If I create a Profit Center hierarchy in BW and bring it into Crystal, then I cannot use the cell definition, which is needed to calculate the correct results.
    Thanks in advance for responses.
    Scott Friery

    Help please!!  I really need some guidance for this problem?  Can I manually modify how the structure looks once I bring it into Crystal and drop into the "Details" section of the designer?
    The structure from the BEx query looks like this in Crystal:
    Global Sales
    Western Region Sales
    Location 1
    Location 2
    Location 3
    Eastern Region Sales
    Location 4
    Location 5
    Location 6
    I want the structure to look like this (and it does in the BEx 7.0 query designer)
    (No Indent) Global Sales
           (Indent 1 Space )Western Region Sales
              (Indent 2 spaces)  Location 1
              (Indent 2 Spaces) Location 2
              (Indent 2 Spaces) Location 3
           (Indent 1 Space) Eastern Region Sales
                (Indent 2 spaces) Location 4
                (Indent 2 spaces) Location 5
                (Indent 2 spaces) Location 6
    Any help is appreciated.
    Scott
    Edited by: Scott Friery on Feb 24, 2011 8:07 PM

  • BC installed BEx Variables are not visible in Query Designer

    Hello,
    I have installed SAP Exit BEx Varibales from Business Content (0P_KEYDT, 0P_KEYD2 and 0P_KEYD3)
    sucessfully.
    But when I am not able to see these variables in the Query Desginer ( Need to restirct these on Net Due Date, Posting Date).
    Please advise me on this.
    Thanks,
    Geetha

    Are you sure you have the characteristics on which these variables are defined  y SAP are in your data target?
    Pl check this out. Alsso, sometimes, if you log out and get back, it may help.
    Ravi Thothadri

  • Query not Visible in Universe

    Hi Experts,
    I want to create a universe based on query.
    When I try to create the connection I am able to see all queries except for the ones I have created.
    I have checked the query for external use as well at BEx level.
    There are no roles maintained in this sandbox server.So no question about inserting my queries into specific roles as it is currently in my favourites.
    Am I missing some setting part somewhere?
    Please assist.

    Hi Wavery,
    You mean to say try to connect to SAP OLE server through my query using pivot table and connecting to external datasource?
    Or do you mean something else?
    If you could provide the steps to the solution you intend to provide will be very much appreciated.
    Thanks.

Maybe you are looking for

  • My Iphone stucked at japanese app store

    Two month ago, I changed my app store to Japanese because I was going to stay in Japan for a while. I updated a new version of IOS when I was staying there. Now, I move back and can't change my app store to an original one. It keeps saying that " Thi

  • How to display contents automatically ?

    Hi, all I have a html form. It has a dropdown list and a text box in it. User will be allowed to select a employee id from the drop down list. (which is coming from DB.) Then as soon as id is selected, that particular employee name should be displaye

  • Used ipod classic won't download music?

    I bought a used ipod classic and whenever i try to download a song i bought on my touch to my classic it won't.

  • What does transaction iView do in the background?

    Hi, I see, it is based on the component "com.sap.portal.appintegrator.sap.Transaction". In essence I need to create a transaction iView from a portal component. What is the procedure to do that? Any examples on that would be helpful. Regards, Megha.

  • When (if ever) to convert to CMYK for printing?

    Hi, I've been doing a ton of Googling and forum searching for an answer to this question, but all of the answers I've been reading are very different and I have no idea which to follow. Essentially, I'm using PS and creating a 10'x10' backdrop for a