BEx query is being defualted to Portal.

Hi all,
We have implemented NW04s both frontend and backend, when we tried to run the BEx query in web it jumps straight into Portal, even we have adjusted ICM configuration attempting to make ABAP web as default handler, wondering what profile parameters are required to update in order to get ABAP web service as default.
We have SP13 and SP9 (with corrections) for frontend and backend respectively.
Many thanks.

Hi all,
I don't think you could default the Web server to ABAP web if you are on BI 7.0 platform, i have done that i could, setting the default handler to ABAP, since we are on BI 7.0, unless you turn off the J2EE engine completely, else it will always try to reach Portal or SAP find a way to do that.
thanks for all for your input.
Cheers.

Similar Messages

Bex Query is not working in portal

Dear Experts,
i have uploaded BI master role into portal, By default Bex Queries are assgined to Master Role. when I clcik on preview for particular Bex Query, it's working fine. but after assigning the master role to end user, that same Bex Query is not working. it's showing Below error..
Portal runtime error.
An exception occurred while processing your request. Send the exception ID to your portal administrator.
Exception ID: 05:22_18/08/10_0002_7116150
Refer to the log file for details about this exception.
please give me suggetions...
Regards,
VENU

Hi Venu ,
Can you please check the logs for details - http(s):<host>:<port>/nwa . This may be a permissions issue . Check if the iview has read permission for everyone group and then test . Also post the error details here .
Regards
Mayank

Crystal Report on BW BEx Query via MDX in SAP Portal

Hi!
We need to display a CR in the Portal. The CR is based on a MDx BW Query. To create and display the report is no problem. Even saving back to BW is working fine.
But how do we get this CR displayed in the EP?
Thanks in advance
Jörn

Hi,
Should only the BO SAP Integration Kit iViews / URL iViews be used and are the Crystal Report iViews (http://help.sap.com/saphelp_nw04/helpdata/en/36/d4a94076b63713e10000000a155106/frameset.htm) obsolete?
Yes as the Crystal Report iView are based on an older version
If we export the Crystal reports to SAP BW, is it possible to call them with BEx iViews like the xCelsius reports? (Like with DASHBOARD=<report name> for xCelsius)
From where can we get the Crystal Report ID, if we export them to SAP BW?
You should use the BusinessObjects Integration Kit iView template for Crystal REports and the ID can be retrieved from the CMC
Ingo

Pass parameter to Bex Query via Query String

Hello,
I am trying to pass a parameter into a Bex Query from a 7.0 portal. I created a Bex query iView and I have tried various permutations with the Bex Query String property of the iview but nothing seems to work. The query runs but the parameter is not passed in.
For example I have tried: cmd=ldoc&TEMPLATE=Z_TEMPLATE&QUERY=Z_QUERY&Z_QUERY_VARIABLE=12345678 and several other variations of doing this.
Thanks,
Bert

Hi Satish,
I had already tried that but it did not work.
Thanks,
Bert

BEx Query Designer - Url openining problem

Dear All,
While running a BI query through BEx Query Designer, it is generating portal URL as:
http:///irj/servlet/prt/portal/prtroot/pcd!3aportal_content!2fcom.sap.pct!2fplatform_add_ons!2fcom.sap.ip.bi!2fiViews!2fcom.sap.ip.bi.bex?QUERY=ZTEST_Q0001&VARIABLE_SCREEN=X&DUMMY=20
have created source system and all RFCs required as running properly.
Any ideas further please ??
my usage type is as below
Active Usage Types
Product Name      UT Code      Short Name      Description      Activation Date      Configured
SAP NetWeaver 2004s      BI      BI Java      BI Java      Mon Aug 11 00:00:00 IST 2008      YES
SAP NetWeaver 2004s      AS      AS Java      Application Server Java      Mon Aug 11 00:00:00 IST 2008      YES
SAP NetWeaver 2004s      EPC      EP Core      Enterprise Portal Core Components      Mon Aug 11 00:00:00 IST 2008      YES
SAP NetWeaver 2004s      EP      EP      Enterprise Portal      Mon Aug 11 00:00:00 IST 2008      NO
SAP NetWeaver 2004s      AAS      AS ABAP      Application Server ABAP      Mon Aug 11 00:00:00 IST 2008      YES
Please correct me where to configure default host name
Regards,
Ravi ghangurde

Dear all.
Below are the details probelm .
i want to open the portal nwa using url "http://10.2.202.154:50000/nwa" but it's ask me username and password screen , when entering J2EE_ADMIN user and correct password next screen is not appears
and same user name and password screen shows again.
when putting worng password it's show authontication fail message.
Below are url details after providig the correct password.
http://10.2.202.154:50000/logon/logonServlet?redirectURL=%2Fwebdynpro%
2Fdispatcher%2Fsap.com%2Ftc%7Elm%7Ewebadmin%7Emainframe%7Ewd%
2FWebAdminApp
in morning it was showing the nwa screen when loginig with path
http://10.2.202.154:50000/nwa and j2ee_admin and password
but we are only change sso tiket parameters in default profile and create tiket in visual administrator.
after than i am not able to open the portal NWA
i want to run post installation wizard for BI post installation please suggest to open the NWA.
is any other way for BI post installation wizard
Regards,
Ravi Ghangurde

Dashboard to BEx query call run time very slow (7-8 mins)

Hi Guys,
I am currently working on a project where BEx query is being consumed using BICS. The functional team has built a BEx which is being cached in Webi by the BO developer and then that cashed Webi is being used in Dashboard. We have many hierarchies (Fund Center, Profit Center, GL Account etc.) used in the dashboard.
BEx query > WEBi (Cached) > Dashboard
Clicking the main level in hierarchy in dashboard the data comes back in 2-3 secs as the data is cached in Webi
ISSUE: In Dashboard based on where user is on the Fund Center hierarchy there is a button called “Summary Report” on the dashboard which calls the BEx query and that second call takes roughly about 7-8 minutes. How could we reduce the run time of the second query?
The secondary query uses the same data set as the first one but as the data is cached in Webi and it uses Web services to pass data to dashboard, so any call back from dashboard to the cached webi the hierarchy information is lost and thus the secondary query call to BEx query.
Would it be possible to recommend any solution where we could bring the run time of the secondary call to less than a minute?
Thanks,
Keys

First update to current frontend patch. many correction are included.
Further check these notes: (relavant only if Analyzer is culprit)
1160093: REPAIR MODE - Prog error/performance problems when using large workbooks
1289127: REPAIR MODE - BExAnalyzer: performance issue applying styles in Excel 2007
1293255: REPAIR MODE - BExAnalyzer: crash when repairing workbook with Excel 2007
1150242+1094799: ANA_USE_SIDGRID - Improving performance/memory in the BEx Analyzer
1179647: ANA_USE_TABLE - Performance: Network load in BEx Analyzer
1260213: ANA_USE_OPTIMIZE_STG - Performance problems during workbook opening in Excel 2007
1287179: ANA_SINGLEDPREFRESH - Single Data Provider Refresh
1286653: Performance issues while displaying hierarchy (especially in Excel 2007)
1352375: ANA_USE_SIDGRIDWBUF / ANA_USE_SIDGRIDMASS Performance improvements in a WAN (roundtrip reductions)
1373214: Workbook compression
1392745: ANA_CACHE_WORKBOOK - Workbook caching

BEx query iView in Portal

Hi All,
I am trying to create a BEx query iView in EP 7.0 and my BI system is BI7.0.
I am refering to the following <a href="http://help.sap.com/saphelp_nw04s/helpdata/en/33/39fa40ee14f26fe10000000a1550b0/frameset.htm">LINK</a> for this but I am not able to get the value for "bookmark_id" from the URL which is generated when I execute the query in standalone mode.
My URL is
http://portalserver:port/irj/servlet/prt/portal/prtroot/pcd!3aportal_content!2fcom.sap.pct!2fplatform_add_ons!2fcom.sap.ip.bi!2fiViews!2fcom.sap.ip.bi.bex?QUERY=0D_DECU_Q0011
In my iView I have made following settings in BEx query string
template_id=0ANALYSIS_PATTERN&infocube=0D_DECU&query=0D_DECU_Q0011
I am getting following error when I preview the iView.
An exception occurred while processing a request for :
iView : N/A
Component Name : N/A
iView not found: com.sap.ip.bi.web.portal.integration.launcher.
Exception id: 06:50_07/08/07_0085_4284050
Please help
Regards
Sid

Dear Luciano,
I referred to the note you have suggested and as per the note, I need to install BI-JAVA on my portal system to access BI content.
Please see this <a href="https://www.sdn.sap.com/irj/sdn/thread?threadID=410737">FORUM</a>, it tells that with single sign on between portal and BI system you will not require BI-JAVA on EP if it is already installed on BI system which in my case is already done.
Kindly comment on the forum whether it is true or not.
Regards
Sid

Which is better to use: BEx query or Web Application as an iView in portal?

Hi gurus!
Are there any experienced opinions, which is better - publish a BEx query in portal or publish a BEx Web Application in portal? Is it easier to alter the layout attributes etc. if I create a BEx Web Application first before publishing?
What is the way of fixing for example filter item height if I publish BEx query in portal - is there a Web Application that it uses anyhow which I can fix? Or can I use in that case iView -properties in portal?
Thankful for advice
Sari

ok, means i can use jsp:useBean tag for all my
classes that are not actually bean. so it will be
instantiated at run time and provide efficiency .No. Jsp:useBean is used for java bean components.
>
but when should i use import statement in my jsp and
it happen at translation time so will it create any
type of burden for my code if i import multiple
classes.For non-java beans, you need to import the classes, period.
It's not a burden, it's a necessity.

How to increase the row and Column length of Bex query in EP Portal 7.3

Dear All,
Please let me know the process to Increase the Rows and Columns Size of Bex Query in Enterprise Portal of SAP 7.3 .
Please let settings to increase rows up 10000 and column 100 in one page.
Thanks
Regards,
Sai

Dear All,
Please find the attached screen shot.
The report be open with 4 or 5 columns and 5 or 6 rows.
So, please let me know how to increase the length of the table.
Do the needful for me to over come this issue.
Thanks
Regards,
Sai.

How to set default Web Template for BEx Query iViews in Portal?

Hi,
1) In SPRO you can set the Standard Web Template used, e.g. ZANALYSIS_PATTERN1.
2) I published a query to Portal and when it runs within Portal, I want it to use a different web template, say ZANALYSIS_PATTERN2.
I don't want to change the BEx Web Application Query String property for each iView to hardcode the template e.g. to "QUERY=TestQuery1&TEMPLATE=ZANALYSIS_PATTERN2"
I only want the query name in the iView
Can I set this somewhere in Portal? I tried changing the standard "BEx Web Analyzer" iView as mentioned in
http://help.sap.com/saphelp_nw70/helpdata/en/33/39fa40ee14f26fe10000000a1550b0/frameset.htm (BEx Web Application or Query as iView in the Portal)
but it still seems to take the template from SPRO even after restarting J2EE

Hi,
I don't think anyone is holding back knowledge, I think it's sometimes difficult to filter out "good" questions as opposed to "bad" questions...
In any case, I don't think it's possible to have different default templates, eg one for the portal and one for the "rest". I'm afraid you'll have to either change each one on the portal or use one for all.
Cheers,
Dion

How to set default Web Template for BEx Query iViews in BI Portal?

Hi,
1) In SPRO you can set the Standard Web Template used, e.g. ZANALYSIS_PATTERN1.
2) I published a query to Portal and when it runs within Portal, I want it to use a different web template, say ZANALYSIS_PATTERN2.
I don't want to change the BEx Web Application Query String property for each iView to hardcode the template e.g. to "QUERY=TestQuery1&TEMPLATE=ZANALYSIS_PATTERN2"
I only want the query name in the iView
Can I set this somewhere in Portal? I tried changing the standard "BEx Web Analyzer" iView as mentioned in
http://help.sap.com/saphelp_nw70/helpdata/en/33/39fa40ee14f26fe10000000a1550b0/frameset.htm (BEx Web Application or Query as iView in the Portal)
but it still seems to take the template from SPRO even after restarting J2EE
(I just published this question in Portal forum but I think it belongs here instead since it is BI Portal - apologies for the double-post..)

D Nore did you found the way to do it ?
I still have the issue, whatever the place where I force the template, the queries on the portal does not use my specific template.
I tried :
pcd:portal_content/com.sap.pct/platform_add_ons/com.sap.ip.bi/iViews/com.sap.ip.bi.bexwebanalyzer
(this one was working before upgrade to netweaver stack 17).
as well as
pcd:portal_content/templates/iviews/sap_bw_report_iview
and
pcd:portal_content/templates/iviews/sap_bi7x_report_iview
none works !
If you have the tricks share it with us.

Bex Query designer withour Enterprise Portal?

Dear BW experts,
After launching the Bex Query designer with BI7 system. After designing query, If I click on execute (Ctrl+R). It is launching internet explorer with error "Invalid Syntax error - Page cannot be displayed"
It is launching the following URL
http:///irj/servlet/prt/portal/prtroot/pcd!3aportal_content!2fcom.sap.pct!2fplatform_add_ons!2fcom.sap.ip.bi!2fiViews!2fcom.sap.ip.bi.bex?QUERY=ZCCQ20071048070001&VARIABLE_SCREEN=X&DUMMY=1
I think it is looking for Enteprise Portal server. I dont have an EP server.
What is the alternate way to execute this?
Thanks in Advance...

Hello to all of you,
just to make sure that I do not missunderstand:
As far as I know in BW3.5 (without EP installed) you were able to execute a query directly out of the query designer and it was shown as a web-query.
Now I tried to do the same with a BI7-System the first time and I get the same symptom as Abdullah. We also do not have an EP installed on that system.
As solution, you all describe that I have to open the query in analyzer to see it in excel - OK - BUT if I do not want to see it in excel but as a webquery (like in my good old BW3.5) instead ? Isn't that possible anymore ???
Uwe

How to Increase the Rows and Columns Size of Bex Query in Enterprise Portal of SAP 7.3

Dear All,
Please let me know the process how to Increase the Rows and Columns Size of Bex Query in Enterprise Portal of SAP 7.3 .
Currently I am getting Only 4 columns and 10 rows in One Page .And I am getting 1,2 etc tabs for both row and column. So i want to increase the column length more than 100 and row length more than 10000.
Please suggest me a suitable solution to over come this issue.
Please find the Below screen shot.
Thanks
Regards,
Sai

Dear All,
Please find the attached screen shot.
The report be open with 4 or 5 columns and 5 or 6 rows.
So, please let me know how to increase the length of the table.
Do the needful for me to over come this issue.
Thanks
Regards,
Sai.

Re: BI BEx query in Portal

Hi All,
My user wants me to develop a report which to be displayed in portal.
Kindly tell me what all the ways I can achieve this.
Few questions,
1. There is an option available in BEx query Designer publish to portal. How to use this. what will happen if i click that. where it will go. how to assign this to the portal user role.
2. how to create an iview in portal for existing bi query?
3. Iview, if i am creating an iview in portal using bi query. how to publish that to the user.
Pls give me a complete picture on the above needs.
Regards,
Anand.

Hi,
If you have BEx poratl already available then there is no issue.
When you will click on that it will ask for iView creation and folder name then select the appropprite one. Just continue with that.
You need to have proper authorization for that.
You may refer following document for the same.
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/80955d0f-ae67-2b10-35a3-c2efec2ba42c
I hope it will help.
Thanks,
S

Display BEx query in iFrame (non portal)?

Hi,
We're currently having trouble displaying a BEx query URL in an iFrame outside of the portal. Meaning, we have a different application web server that is attempting to point to the URL from the SAP server.
When we simply paste the URL in the web browser, it's not a problem; so the URL is ok. However, when we include the URL in an iFrame, the portal login screen appears, but soon after you log in, the page loops infinitely through the same request and never gets to the intended page.
Has anyone run into a solution for this situation?
Thanks

Hi,
Check this link....might be useful to ur reqq..
Access BEx Queries through non-SAP Portal
http://help.sap.com/saphelp_nw2004s/helpdata/en/43/d08b00d73001b4e10000000a11466f/content.htm
Hope this helps u..
Best Reards,
VVenkat..

BEx query is being defualted to Portal.

Similar Messages

Maybe you are looking for