BEx query iView in Portal
Hi All,
I am trying to create a BEx query iView in EP 7.0 and my BI system is BI7.0.
I am refering to the following <a href="http://help.sap.com/saphelp_nw04s/helpdata/en/33/39fa40ee14f26fe10000000a1550b0/frameset.htm">LINK</a> for this but I am not able to get the value for "bookmark_id" from the URL which is generated when I execute the query in standalone mode.
My URL is
http://portalserver:port/irj/servlet/prt/portal/prtroot/pcd!3aportal_content!2fcom.sap.pct!2fplatform_add_ons!2fcom.sap.ip.bi!2fiViews!2fcom.sap.ip.bi.bex?QUERY=0D_DECU_Q0011
In my iView I have made following settings in BEx query string
<b>template_id=0ANALYSIS_PATTERN&infocube=0D_DECU&query=0D_DECU_Q0011</b>
I am getting following error when I preview the iView.
<b><i>An exception occurred while processing a request for :
iView : N/A
Component Name : N/A
iView not found: com.sap.ip.bi.web.portal.integration.launcher.
Exception id: 06:50_07/08/07_0085_4284050</i></b>
Please help
Regards
Sid
Dear Luciano,
I referred to the note you have suggested and as per the note, I need to install BI-JAVA on my portal system to access BI content.
Please see this <a href="https://www.sdn.sap.com/irj/sdn/thread?threadID=410737">FORUM</a>, it tells that with single sign on between portal and BI system you will not require BI-JAVA on EP if it is already installed on BI system which in my case is already done.
Kindly comment on the forum whether it is true or not.
Regards
Sid
Similar Messages
-
How to set default Web Template for BEx Query iViews in Portal?
Hi,
1) In SPRO you can set the Standard Web Template used, e.g. ZANALYSIS_PATTERN1.
2) I published a query to Portal and when it runs within Portal, I want it to use a different web template, say ZANALYSIS_PATTERN2.
I don't want to change the BEx Web Application Query String property for each iView to hardcode the template e.g. to "QUERY=TestQuery1&TEMPLATE=ZANALYSIS_PATTERN2"
I only want the query name in the iView
Can I set this somewhere in Portal? I tried changing the standard "BEx Web Analyzer" iView as mentioned in
http://help.sap.com/saphelp_nw70/helpdata/en/33/39fa40ee14f26fe10000000a1550b0/frameset.htm (BEx Web Application or Query as iView in the Portal)
but it still seems to take the template from SPRO even after restarting J2EEHi,
I don't think anyone is holding back knowledge, I think it's sometimes difficult to filter out "good" questions as opposed to "bad" questions...
In any case, I don't think it's possible to have different default templates, eg one for the portal and one for the "rest". I'm afraid you'll have to either change each one on the portal or use one for all.
Cheers,
Dion -
How to increase the row and Column length of Bex query in EP Portal 7.3
Dear All,
Please let me know the process to Increase the Rows and Columns Size of Bex Query in Enterprise Portal of SAP 7.3 .
Please let settings to increase rows up 10000 and column 100 in one page.
Thanks
Regards,
SaiDear All,
Please find the attached screen shot.
The report be open with 4 or 5 columns and 5 or 6 rows.
So, please let me know how to increase the length of the table.
Do the needful for me to over come this issue.
Thanks
Regards,
Sai. -
How to Increase the Rows and Columns Size of Bex Query in Enterprise Portal of SAP 7.3
Dear All,
Please let me know the process how to Increase the Rows and Columns Size of Bex Query in Enterprise Portal of SAP 7.3 .
Currently I am getting Only 4 columns and 10 rows in One Page .And I am getting 1,2 etc tabs for both row and column. So i want to increase the column length more than 100 and row length more than 10000.
Please suggest me a suitable solution to over come this issue.
Please find the Below screen shot.
Thanks
Regards,
SaiDear All,
Please find the attached screen shot.
The report be open with 4 or 5 columns and 5 or 6 rows.
So, please let me know how to increase the length of the table.
Do the needful for me to over come this issue.
Thanks
Regards,
Sai. -
hi gurus...
i d like to know if a bex query save some user customization when a user uses it on portal? if yes, how can i delete this customization for a specific user?
regards
jokerAddy,
First you would have to ensure that there is SSO setup between BI and Portal.
You might want to follow these steps.
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/b0a5216a-349c-2a10-9baf-9d4797349f6a
Once, you are done with it. It is a simple process, you will have to create an bex iview and give the query and you are done.
Also, have a look at [this|https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/f0235c19-9493-2b10-64a5-8487b23a7a41] for creating various types of iviews.
Good Luck!
Sandeep Tudumu -
How to publish a Bex query on the portal
Hi Guru,
I have created some Bex queries and I want to publish them on the portal and give access to users.
Is it mandatory to put the queries in a web template before publishing ???
Can I publish without creating a web template ???
In case of web templates, how to publish them as url on the portal ???
Your help will be appreciated
Thanks in advanceHi,
You need not to create web template to publish query in portal.
there are two ways for publishing
1)Go to query designer Click on Query -> Publish-> To portal
here you select the path where you want to create the iview
2)Log in to portal setect the folder in which you want to publish report.
right click -> create new iview -> select BI 7.0 iview -> next -> iview name ie report name -> next -> Application parameter -> here you need to write QUERY =Query technical name -> next -> finish
Try this,
Regards,
Ganesh -
How to set default Web Template for BEx Query iViews in BI Portal?
Hi,
1) In SPRO you can set the Standard Web Template used, e.g. ZANALYSIS_PATTERN1.
2) I published a query to Portal and when it runs within Portal, I want it to use a different web template, say ZANALYSIS_PATTERN2.
I don't want to change the BEx Web Application Query String property for each iView to hardcode the template e.g. to "QUERY=TestQuery1&TEMPLATE=ZANALYSIS_PATTERN2"
I only want the query name in the iView
Can I set this somewhere in Portal? I tried changing the standard "BEx Web Analyzer" iView as mentioned in
http://help.sap.com/saphelp_nw70/helpdata/en/33/39fa40ee14f26fe10000000a1550b0/frameset.htm (BEx Web Application or Query as iView in the Portal)
but it still seems to take the template from SPRO even after restarting J2EE
(I just published this question in Portal forum but I think it belongs here instead since it is BI Portal - apologies for the double-post..)D Nore did you found the way to do it ?
I still have the issue, whatever the place where I force the template, the queries on the portal does not use my specific template.
I tried :
pcd:portal_content/com.sap.pct/platform_add_ons/com.sap.ip.bi/iViews/com.sap.ip.bi.bexwebanalyzer
(this one was working before upgrade to netweaver stack 17).
as well as
pcd:portal_content/templates/iviews/sap_bw_report_iview
and
pcd:portal_content/templates/iviews/sap_bi7x_report_iview
none works !
If you have the tricks share it with us. -
Pass parameter to Bex Query via Query String
Hello,
I am trying to pass a parameter into a Bex Query from a 7.0 portal. I created a Bex query iView and I have tried various permutations with the Bex Query String property of the iview but nothing seems to work. The query runs but the parameter is not passed in.
For example I have tried: cmd=ldoc&TEMPLATE=Z_TEMPLATE&QUERY=Z_QUERY&Z_QUERY_VARIABLE=12345678 and several other variations of doing this.
Thanks,
BertHi Satish,
I had already tried that but it did not work.
Thanks,
Bert -
Which is better to use: BEx query or Web Application as an iView in portal?
Hi gurus!
Are there any experienced opinions, which is better - publish a BEx query in portal or publish a BEx Web Application in portal? Is it easier to alter the layout attributes etc. if I create a BEx Web Application first before publishing?
What is the way of fixing for example filter item height if I publish BEx query in portal - is there a Web Application that it uses anyhow which I can fix? Or can I use in that case iView -properties in portal?
Thankful for advice
Sariok, means i can use jsp:useBean tag for all my
classes that are not actually bean. so it will be
instantiated at run time and provide efficiency .No. Jsp:useBean is used for java bean components.
>
but when should i use import statement in my jsp and
it happen at translation time so will it create any
type of burden for my code if i import multiple
classes.For non-java beans, you need to import the classes, period.
It's not a burden, it's a necessity. -
Bex Query is not working in portal
Dear Experts,
i have uploaded BI master role into portal, By default Bex Queries are assgined to Master Role. when I clcik on preview for particular Bex Query, it's working fine. but after assigning the master role to end user, that same Bex Query is not working. it's showing Below error..
Portal runtime error.
An exception occurred while processing your request. Send the exception ID to your portal administrator.
Exception ID: 05:22_18/08/10_0002_7116150
Refer to the log file for details about this exception.
please give me suggetions...
Regards,
VENUHi Venu ,
Can you please check the logs for details - http(s):<host>:<port>/nwa . This may be a permissions issue . Check if the iview has read permission for everyone group and then test . Also post the error details here .
Regards
Mayank -
Advantages of BW Query in SAP Portal when compared to WEB BEx Analyzer
Hi
What are the advantages of having a BW Query in SAP Portal when compared to WEB BEx Analyzer
I had to presention to higher managers of having a SAPPortal for BW report that WEB BEx Analyzer
can any one please update me with few points (10-20) that will be useful for my presentation
screen to geethikakrishna->gmail
Thanks in advanceHi Krishna ,
I think you should highlight the portal role in presentation
Now a days all organizations using sap portal as their user interface. We can login portal once and we can get all the information from bw,crm...sap systems and non sap systems.
so no need to login each and every system individually.
The portal offers a single point of access to SAP and non-SAP information sources, enterprise applications, information repositories, databases and services in and outside your organizationall integrated into a single user experience. It provides you the tools to manage this knowledge, to analyze and interrelate it, and to share and collaborate on the basis of it.
With its role-based content, and personalization features, the portal enables usersfrom employees and customers to partners and suppliersto focus exclusively on data relevant to daily decision-making processes
For all information on portals refer to help.sap.com->documentation->netweaver->Netweaver2004->English
IN people integration you will find information on portals
http://help.sap.com/saphelp_nw04/helpdata/en/19/4554426dd13555e10000000a1550b0/frameset.htm
check below threads for some information
easiest way to publish
Easiest way to post existing BW queries onto portal
http://help.sap.com/saphelp_nw04s/helpdata/en/43/92dceb49fd25e5e10000000a1553f7/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/9d/24ff4009b8f223e10000000a155106/frameset.htm
Execution of BW Reports Through Enterprise Portal
Best Practices for BI Report publishing on Portal - BI 7
Use of BI's Enterprise Portal
The web application designer offers rich functionality for creating dashboards. In SAP NetWeaver BI 2004s (aka 7.0), when you publish a template it is automatically created as an iView for the portal.
SAP NetWeaver 2004s BI - Define your Publishing Strategy Part 1
Koti Reddy -
Re: BI BEx query in Portal
Hi All,
My user wants me to develop a report which to be displayed in portal.
Kindly tell me what all the ways I can achieve this.
Few questions,
1. There is an option available in BEx query Designer publish to portal. How to use this. what will happen if i click that. where it will go. how to assign this to the portal user role.
2. how to create an iview in portal for existing bi query?
3. Iview, if i am creating an iview in portal using bi query. how to publish that to the user.
Pls give me a complete picture on the above needs.
Regards,
Anand.Hi,
If you have BEx poratl already available then there is no issue.
When you will click on that it will ask for iView creation and folder name then select the appropprite one. Just continue with that.
You need to have proper authorization for that.
You may refer following document for the same.
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/80955d0f-ae67-2b10-35a3-c2efec2ba42c
I hope it will help.
Thanks,
S -
Publishing a BEx Query reports from BI Portal to Main portal
Hi,
We have 2 portals in out landscape.
BI system has its own portal and the main portal for the commercial users.
I have a requirement to bring BEx query Reports to Main portal.
I am wondering, how this can be done.
Thanks
SamHi vel,
1. You can connect BW/BI system with your portal.
2. Create BEx iview (7.0) from iview templates.
3. Then display report on portal.
Feel free to update me as per your findings.
Regards,
sam -
Bex query crash for user on sap portal
hi gurus
i have a bex query which users see it through sap portal, i have the case where a user X has made some drill down between rows and columns of the query (over portal), and since then every time this user X open the query, portal shows the query on the rows-columns format that the user X used once.
What can i do in order user X see que query (on portal) in the default rows-columns??
This problem just happen with user X, others users see the query in the default format with no problems.
I ve tried deleting the portal personalization for user X on sap portal, but the problem persists...
suggets?
regards..
jokerIf its Java only error then there wont be any dump in ST22.
Strange issue for you, in general if we get 500 error, there should be details of it in the same page.
You said this issue is occuring for only one user, is it getting replicated every time?
You are also seeing the same error when u login as that particular user?
Do one thing, assign him the Content Admin role and then do the preview of this iView form content admin and see if ur still seeing this error.
Regards
Yugandhar Reddy -
BI Query through an iView in Portal
Hi.
I published my query into the portal through the QAD. When I run the iview, I get the foll error message:
Portal Runtime Error
An exception occurred while processing your request
Exception id: 05:27_17/10/07_0012_6006050
See the details for the exception ID in the log file
What could be error? It was working before we upgraded to support stack 13 on NW04s.
Cheers
AnandHi,
I am also facing the same issue, can you tell me how will a launch a BI query in portal?? i dont know the details.
Your helps will very much appreciated.
Thanks
Ameya
Maybe you are looking for
-
Some of my "events" on "all events" stay black. When i'am with the cursor over these "events" the pictures in it are shown. Why do these events stay black and why can't i open the pictures in it in full size? When i zoom them up they become a black t
-
Can I get a PDF doc off my MBP onto my iPhone without emailing?
I apologize in advance if this has been asked and answered. I'm currently stuck with the Edge Network as my sole Internet connection. Searching for my answer is just beyond my patience at the moment. I'm thrilled to have connectivity at all, however!
-
Why does this work in MS SQL and not in Oracle
ALTER TABLE Stk DROP COLUMN ComCode; This BASIC statement works perfectly in MS SQL, but after 2 hours now, it simply refuses to work in Oracle, although the syntax seems correct, I get : ALTER TABLE Stk DROP COLUMN ComCode ORA-00905: missing keyword
-
SQL Query - Using Lag function
Hi All, I need to select the previous and next record, when the value of column is changed for each account. My table structure is as follows: Account_No number(10) Payment_type number(5) Installment_Type number(5) Date_chage date Sample record: Acco
-
Import VM - Discover and Register
Hello, I have several VMs in my running_pool that I need to register with OVM Manager 2.2.1 running on OEL 5.5. I was able to import and approve 4 of my machines, but when I attempt to do the rest, I am unable to approve the import. I was able to imp