BEx query not getting reflected correctly in OLAP workspace

Hi,
I have an OLAP workspace based on a BEx query. Everything works fine with BEx query and We can see the BEx report as required. But in OLAP workspace for one of the feilds (profit center), the workspace is coming with the Texts but not keys. Keys says Not Assigned everytime.
BEx
OLAP Workspace
1990909099/Super Center
#/Super Center
871812788/Athlon
#/Athlon
We refreshed the connection couple of times and created new reports without any better results. Can anyone suggest a solution for this.
Thanks
Neo

Hi,
Yes,We're using standart template.
This below  URL generated froum Query Designer.
http://<hostname>:50100/irj/servlet/prt/portal/prtroot/pcd!3aportal_content!2fcom.sap.pct!2fplatform_add_ons!2fcom.sap.ip.bi!2fiViews!2fcom.sap.ip.bi.bex?QUERY=KSD_M01_Q006
regards

Similar Messages

  • Changes made in Bex query not refelecting in Webi reports BO 4.0

    Hello Every One,
    We have made changes in BeX query and these changes are not getting reflected in webi reports.
    - We try to edit the connections.
    - Recreated the new connections and point it the webi report.
    We are using BO4.0 patch 2.9.
    DO we have to made any setting in BICS or in CMC or there are any parameter need to tkae care while creating the OLAP connections. we are using SSO.
    Thanks in Advance.

    Hi,
    You shouldn't have to do a "change source" at data provider level, but confirming the object mappings again by repointing webi to the bex query should help.
    As i'm sure you know, we are delivering many corrections in this area, for example:
    If this concerns a Hierarchy change see ADAPT01607814   (P2.11)
    If it concerns change to prompt variables see ADAPT01609491   (P2.12)
    Here's the link to the readme for Patch2.12 (out today) https://websmp101.sap-ag.de/~sapidb/011000358700001362992011E
    Out of interest, what change did you make in the bex query specifically ?
    Regards,
    H
    Edited by: Henry Banks on Feb 17, 2012 10:01 AM

  • TDS line items are not getting reflected in J1INCHLN

    Hi Experts,
    While generating TDS challan we are not getting advance line items in J1INCHLN screen
    We made one advance payment which included 2 payment line items and two different tax codes, while generating TDS challan its is showing only one TDS line item that is Rs.1000/-, another TDS line item of Rs.966/- is not showing.
    Below is the example
    XYZ                                                                         43,000.00
    XYZ                                                                         46,000.00
    Bank                                                                        96,329.00-
    S/Tax Interim-In Cr                                                    5,160.00
    S/Tax Interim-In Cr                                                   3,864.00
    ST Interim E.C-In Cr                                                 103.00
    ST Interim E.C-In Cr                                                 77.00
    ST Inter H E.C-In Cr                                                 52.00
    ST Inter H E.C-In Cr                                                 39.00
    TDS Pble Contractors                                              966.00-
    TDS Pble Contractors                                              1,000.00-
    I checked the below possibilities for reason why its not getting reflected
    Vendor master having recipient type
    WITH_ITEM table updated with recipient type
    In the line item also having Business Place and section code
    Please suggest me is there any way to resolve the issue.
    Thanks & Regards,
    AIM

    Hi,
    Check whether the recipient type CO or OT is updated in With_item table for the line items that are missing in J1INCHLN.
    If Recipient type is not maintained in vendor master, at the time of posting the entry, then it does not get picked up in J1INCHLN. Even if you maintain in Vendor master later on, the With_item table does not get updated. This is one of the reasons why the line items does not get picked up in J1INCHLN. Check this, as you are confirming that Business Place, Section code etc.. are all present in line items and also that it is appearing correctly in With_item table.
    Regards
    Divya S

  • Enhancement not getting reflected in Info Cube

    Hello Friends,
    I have made enhancement for getting additional data in the InfoCube 0SD_C03 fro data source 2LIS_13_VDITM .I have made changes in Communication Structure and transfer structure as well . But i am getting the required data in the psa and addition fields are not getting reflected in the infocube . Please suggest me a solution .
    Regards
    Nilesh Vakil

    Hi,
    You have to map the Rules in two Transformations. One for DataSourec to InfoSource and InfoSource to Cube.
    Confirm that you entered all the infoobjects and those compound objects too into the cube, Don't forget to map compound objects in transformation rules. Activate every single object individually.
    Did you create DTP for cube? In BI 7.0 for InfoPackage by default "psa only".
    Aparna.

  • PHOTO IS NOT GETTING REFLECTED IN ADOBE FORM

    Hi experts
    We have tried the below code to dispaly photo in webdynpro integrated with adobe forms
    CALL FUNCTION 'HR_IMAGE_EXISTS'
        EXPORTING
          p_pernr                     = v_obj_id
    *     P_TCLAS                     = 'A'
    *     P_BEGDA                     = '18000101'
    *     P_ENDDA                     = '99991231'
        IMPORTING
    *     P_EXISTS                    =
          p_connect_info              = l_connect_info
        EXCEPTIONS
          error_connectiontable       = 1
          OTHERS                      = 2.
      CHECK sy-subrc = 0.
      CALL FUNCTION 'SCMS_DOC_READ'
        EXPORTING
    *     MANDT                       = SY-MANDT
          stor_cat                    = space
          crep_id                     = l_connect_info-archiv_id
          doc_id                      = l_connect_info-arc_doc_id
    *     PHIO_ID                     =
    *     SIGNATURE                   = 'X'
    *     SECURITY                    = ' '
    *     NO_CACHE                    = ' '
    *     RAW_MODE                    = ' '
    *   IMPORTING
    *     FROM_CACHE                  =
    *     CREA_TIME                   =
    *     CREA_DATE                   =
    *     CHNG_TIME                   =
    *     CHNG_DATE                   =
    *     STATUS                      =
    *     DOC_PROT                    =
        TABLES
          access_info                 = lt_infos
    *     CONTENT_TXT                 =
          content_bin                 = lt_image_bin
        EXCEPTIONS
          bad_storage_type            = 1
          bad_request                 = 2
          unauthorized                = 3
          comp_not_found              = 4
          not_found                   = 5
          forbidden                   = 6
          conflict                    = 7
          internal_server_error       = 8
          error_http                  = 9
          error_signature             = 10
          error_config                = 11
          error_format                = 12
          error_parameter             = 13
          error                       = 14
          OTHERS                      = 15.
      CHECK sy-subrc = 0.
      READ TABLE lt_infos INDEX 1 ASSIGNING <fs_info>.
      CHECK sy-subrc = 0.
      CALL FUNCTION 'SCMS_BINARY_TO_XSTRING'
        EXPORTING
          input_length = <fs_info>-comp_size
          first_line   = <fs_info>-first_line
          last_line    = <fs_info>-last_line
        IMPORTING
          buffer       = l_employee_photo_content
        TABLES
          binary_tab   = lt_image_bin
        EXCEPTIONS
          failed       = 1
          OTHERS       = 2.
    but the photo is not getting reflected in the adobe forms .
    and also i have tried the url method but it doesnt work .
    please help me out .

    First, have you set a breakpoint in this code and made sure that you are getting data into lt_image_bin?  That would seem to be the first place to start.
    Then the question is how are you trying to pass the image into the Adobe Form?  Are you passing an XSTRING context attribute into the form interface?  Have you marked that part of the interface as an image?  Are you setting the MIME Type parameter of the form interface as well.  You really haven't posted any details about what you are doing on the Adobe Form side.

  • Chnages in the Graph properties are not getting reflected in the Browser.

    Hi,
    I have made some changes in the Graph properties in web template,
    Eg. : 1. change in color of a series for a columnar type graph
             2.change in the Text properties of Graph Series..
    When I save the template and try to run in the Browser, these changes are not getting reflected.
    Can anybody help me in this aspect ?
    Thanks.
    Regards.
    Amol Bade

    Same here :´(
    Thanks In Advance
    Juan

  • New changes are not getting reflected in the bam reports.

    Hi
    I have created a BPEL process and it polls the data from a table and populate an object created in Bam.I have accomplished the above task by createing two database adaptors.One is on 10g database and another one is on Bam database.I have created a view based on the bamobject and used a database adaptor to populate the data. BPEL process is populating the data properly to that bamobject but those changes are not reflecting to bam reports automaticaly. We need to refresh the report or reprompt the report to see the changes.Could some help me to reslove this issue.
    Thanks in advance
    Laj Abraham

    Hi charles
    I have tried that option too.But that is also not working. BPEL Procees is able to populate the BAM object with the help of the sensor.But those changes are not getting reflected in BAM Reports.But if i create or update an existing record in BAM object through BAM Architect, those changes are getting reflected in BAM Reports(No manual intervention is required).
    Your help in this regard is highly appreciated.
    Thanks
    Laj Abraham

  • Changes are not getting reflected in Process Chain after changes.

    Hello,
    I have modified a Process Chain in Development environment. I have created one new infopackage and included it in the process chain. I have also added two new change run variants in the process chain. I have collected the process chain and infopackage in a transport request and transported it to integration environment.
    Transport request has reached successfully in integration but the changes in process chain are not getting reflected. The infopackage has reached to integration after transport.
    I need some suggestion on this.
    Regards,
    Sanjay

    Hi Sanjay.......
    R u in Display mode..........click on Change mode...........
    If you can see the chain in Change mode............then ur process chain is imported in in-active version..........
    U can try activating it manually or re-transport the active version..........
    Regards,
    Debjani......

  • Reg: View changes not getting reflected

    Hello All,
    I made some view changes like field mapping for the Family Dependents view.
    I Created the Activity and deployed using NWDI but the changes are not getting reflected.
    Please assist me in resolving the issue.
    What might have gone wrong? and how to solve the problem.
    Thanks in advance for the time.
    Regards,
    Pramod

    The issue is with the activities queued up in TCS Deployer.
    Rerun the TCS deployer and the issue is solved.
    Thanks,
    Pramod

  • Methodology/Processes Not getting reflected while creating a role via BRM in GRC

    Hello All,
    The methodology I have created is not getting reflected while creating a new Single role.
    I have maintained the condition groups properly in decision table, and assigned the same to the methodology as well.
    Please suggest.
    Thanks
    Regards,
    Shruti

    Methodology is updated when you press save after completing the first step.
    can you please share screen shots of configuration and issue you are getting

  • Support message not getting reflected in Solution manager system

    Hi,
    In satellite system support message is getting created, message number"...." successfully created in service desk.
    When i check in solution manager system in  crm_dno_monitor the message that i created in satellite system is not getting reflected in solution manager. I removed the varients and then executed . The result is still the same.
    Service desk was configured from our Development system (Client 320) to solution manager. I wanted the support desk to work from my another cleint in same system to Solution manager.
    What can be the possible problem.
    Thanks & Regards,
    Balaji.S

    Hi Gurus,
    Issue got resolved, the problem was with the variant which was assigned as default for the tcode.
    Thanks & Regards,
    Balaji.S

  • New Value addition in Restricted List under Rules not getting reflected

    Hi,
    I have created a custom rule for a custom profile. In the rule i have configured a metadata named as Reviewer. Under restricted values of reviewer i have put in 2 values.
    It is getting reflected properly in the profile check in form.
    But now when i add a new value, it is not getting reflected. Is restart required to get that field populated with new value ?. I have already published the schema base and static files.
    Please suggest.
    Regards,
    Boopathy P

    In your metadata field definition, your field is defined as having an option list. Does the value you just added to the restricted list also exist in the overall list of values for the field?
    For example, your list has values "a", "b", and "c". In your profile restricted list, you have "a" and "b". Now have you added "d" to the restricted list, which does not appear in the defined list for the metadata field?

  • Values in parallel flow are not getting reflected

    Hi ,
    I have split in one of my auto activity.In this split one of flow I am changing instance variable (boolean) value.But this value is not getting reflected in second flow.Is there any way to set this value.
    Please help me
    Thanks
    Sailendra

    Yes - you can use your Split / Join design pattern for what you're trying to do. You just need to add one more thing.
    This is going to take a knowledge of:
    <li> Correlation - initiate and terminate methods
    <li> Notification using logic from a screenflow and
    <li> Message Wait activity with an Interrupt property
    It might seem like a lot, but if all you have is JMS then it's what I'd suggest.
    1. Create a correlation just after the Split and before your Automatic activity. The purpose of this correlation is to be the receptor of a notification when you want to eliminate the time loop. The logic for this looks like this:
    args[] = clientCaseId
    args[] = productId
    Correlation.initiate(name : "documentRetrieval", values : args)2. Add a Message Wait activity in your process. If you call it "WaitForEarlyReleaseCompletion" you might find that the logic in the step 4 is helpful. Have its property set to "Allows interruptions" and "External". Add this activity outside of the process's flow. Right mouse click the Messsage Wait activity -> click "Argument Mapping" -> click on the arguments icon in this dialog and add the (two in the example) argument variables you want to use to notify the correlation (clientCaseId and productId in this example). Click the "Correlations" icon in this dialog (two to the right of the arguments icon). In the left panel add a new correlation (name it case sensitive "documentRetrieval" for this example). Right click this new correlation and give it properties (the variables you want to use for the correlation - in this example "clientCaseId", "productId". Select the correlation and click the right arrow to move the correlation to the upper right portion of the dialog. Leave "Initiate" set to "No". In the lower right portion of the dialog, map the correlation's properties (again clientCaseId and productId in this example) to the incoming argument variables you just created (also called clientCaseId and productId in this example). Click OK
    3. This standalone activity needs to flow to an Automatic activity outside of the process. The logic in this Automatic activity needs two lines:
    // this assumes your time interval in your due transition is called "myTimer" and you just
    //   want to stop it
    myTimer = null
    action = BACK4. Inside your screenflow, in an Automatic Task send a notification to the Message Wait activity using the same correlation values (e.g. "clientCaseId" and "productId") you used earlier in the correlation intiate method.
    args as Any[Any]
    args["clientCaseId"] = clientCase.clientCaseId
    args["productId"] = clientCase.products.first.product.productId
    send(Notification, processId : "/DepartmentApprovals",
                                            activityName : "WaitForEarlyReleaseCompletion",
                                            arguments : args,
                                            argumentSetName : "WaitForEarlyReleaseCompletionIn")Dan

  • GLPCA table not getting updated correctly for VBUND

    Hi All,
    I have come across one issue that the value of trading partner field (VBUND) in table GLPCA are not getting updated correctly for document type KP.
    In vendor master this field has different value versus it is showing in GLPCA-VBUND.
    Does any one knows about ?
    Thanks for your help on it.
    Regards,
    Manoj

    Hi Sridhar,
    Thanks for your response on it.
    This note is not applicable for our system as we are working on 4.0B with support pack 52.
    Also we are getting this worng update of this field (GLPCA-VBUND) while doing MR11 creating document with doc. type KP. This value is not picking from vendor master (LAF1-VBUND) and randamly picking any value. Not sure from where ?
    Please advise your thought.
    Thanks,
    Manoj

  • Excel Charts do not get displayed correctly (colour) !urgent!

    Hi,
    believe me: I spent days in research to fix my problem but could not find a solution yet...
    I use a lot of Excel Web Parts on my SharePoint Site. Basically to display charts or tables. Everything worked fine for months but out of a sudden some of the web parts do not anymore. These Web Parts still get displayed but all in black or grey and
    because of that are partly unreadable. For example: a cell with a white font and a blue blackground just gets displayed as a black cell with black fontcolour. I thought it might depends on the settings of the server computer but other colourful charts/tables
    still work fine (but on the other hand, all new web parts do not get displayed correctly...)
    I tried to remove macros, conditional formatting, creating completely new subsites with content. But the result is always the same: black cells.
    Then I tried to just use 8bit-colours and tada: it worked (except of the colour white, that still does not work).. I do not have access to the server computer. And I am wondering because some other charts still work..
    Any ideas?
    I do not use SharePoint Designer, just the browser version of 2010.
    Thanks for your help!!!

    Here is the code:
    IANode QueryContractResultNode = wdContext.nodeA();
    IBNode ToolTipNode = wdContext.nodeToolTipNode();
    QueryContractResultNode.invalidate();
    for(int i=0; i<searchContractListSize; i++)
       IAElement newQueryContractResultEl =   QueryContractResultNode.createAElement();
    WDCopyService.copyCorresponding(getList.getOutput().getI_Detail().get(i),newQueryContractResultEl);
    IBElement newToolTipEl = ToolTipNode.createBElement();
    if(newQueryContractResultEl.getParentName().length() >= 5)
         newToolTipEl.setChildName  (newQueryContractResultEl.getParentName().substring(0,4) + "...");
    else
         newToolTipEl.setChildName (newQueryContractResultEl.getParentName());
    QueryContractResultNode.addElement(newQueryContractResultEl);
    ToolTipNode.addElement(newToolTipEl);
    Node A is bound to a model structure.  Therefore, the value of A.parentName is set after the RFC execution.
    Zita

Maybe you are looking for