BEx Query-Problem opening query showing restricted key figure is inactive

Hi  all,
While activating the Query we are getting error , the object is missing in active version  ?
And also it is not allowing to open the query  how  to activate the query element now?
Also restricted key figure is inactive and how to activate the query in background ?

Hi,
I have never heard of query activation, we simply create the query and save it. I don't know which activity you are referring to but try to open your query through RSRT and check what is the error it shows?
And before that make sure that your Infoprovider is in active state.
Regards,
Durgesh.

Similar Messages

  • How to show filter values of restricted key figures in BEx Analyzer?

    Hi,
    I have following report.
                         Quantity USA        Quantity China
    Product           100                        150
    Quantity USA is a restricted key figure using key figure 'quantity' and a restriction on characteristic 'country' = USA
    Quantity China is a restricted key figure using key figure 'quantity' and a restriction on characteristic 'country' = China
    I notice that when I put only one of these resticted key figures into the query, there is a line in the filter area of the report in the BEx Analyzer that shows the characteristic 'country' and the value on which it's restricted in the restricted key figures.
    E.g.:
    Country          USA
                         Quantity USA
    Product           100 
    If I put both restricted key figures in the query, this line is not shown.
    Does anyone of you know how I can display this line again when using multiple restricted key figures like this in the query?
    Thanks!
    Regards,
    Pascal

    Hi,
    I have following report.
                         Quantity USA        Quantity China
    Product           100                        150
    Quantity USA is a restricted key figure using key figure 'quantity' and a restriction on characteristic 'country' = USA
    Quantity China is a restricted key figure using key figure 'quantity' and a restriction on characteristic 'country' = China
    I notice that when I put only one of these resticted key figures into the query, there is a line in the filter area of the report in the BEx Analyzer that shows the characteristic 'country' and the value on which it's restricted in the restricted key figures.
    E.g.:
    Country          USA
                         Quantity USA
    Product           100 
    If I put both restricted key figures in the query, this line is not shown.
    Does anyone of you know how I can display this line again when using multiple restricted key figures like this in the query?
    Thanks!
    Regards,
    Pascal

  • Building a new Cube Vs Restricted Key figure in Query - Performance issue

    Hi,
    I have a requirement to create  a OPEX restricted key figure in Query. The problem is that the key figure should be restricted to about 30 GL Accounts and almost 300 Cost centers.
    I do not know if this might cause performance issue in the query. At the moment, I am thinking of creating a new OPEX cube and load only those 30 GL Accounts, 300 cost  centers and Amount. and  include OPEX  in multiprovider in order to get OPEX
    amount in the report.
    whats the best solution - creating OPEX restricted key figure or OPEX cube ?
    thanks,
    Bhat

    I think you should go for cube as all the restrcited key figure are calculated at OLAP runtime so it will definitely affect the query performance.There are a lot of costcenter for which you have to restrict it so definitely during the runtime of query it will take a lot of time to fetch tha data from infoprovider.Its better that you create a cube with the restrictions and include it in MP.It will definitely save a lot of time during query execution
    Edited by: shyam agarwal on Feb 29, 2012 10:26 AM

  • Query Designer restricted key figures using a prompt value

    Hallo Experts,
    I would like to restrict key figures after user has beeen prompted to enter a date. I have 2 key figures:
    a) KF1, Date1
    b) KF2, Date2
    User should be prompted to select a specific date: e.g. 01/2011. After selecting/entering the prompted date value, it should be given to date objects for intance Date1=01/2011 and Date2=01/2011.
    How could I achieve it in Query Designer without using customer_exit function? Reason is that non-experienced users will use this report and they should not be confronted with complex query. Do you have any idea?  
    Many thanks
    Mamadu

    Hi,
    I assume that you need to restrict the value of keyfigures by date based on user input data on variable selection screen.
    First create one user input variable on your date field say for eg calday.
    Now restrict your KF1 with calday and choose that vairable which you created.
    For second KF2 which seems to me need to be restricted with offset of +1 based on the date entered by the user.
    So restrict this KF2 with calday and use the same variable with offset of +1
    I just misunderstood you ned calmonth or day because in requirement you have given month but you are calling it as date.
    If its month then replace calday with calmonth..
    Hope it helps.
    Regards,
    AL:
    Edited by: AL1112 on Dec 21, 2011 9:42 AM

  • How to copy restricted key figures in query designer ?

    hi,
    i have created a query in query designer (BI 7.0).
    How can i copy existing restricted key figures ? i can't find anything. i always have to create a new one, and then i have to do all the things like 'details of selection' etc.... manually. that CANNOT be, there MUST be a way to copy those key figures.
    any ideas ?
    best regards, Martin

    Hi Martin,
    Restricted key figures can be stored on the infoprovider basis . For which right click on the key figure (left hand side pane ), Select the necessary key figure and assign the restriction through characteristics combination, and give it a restriction and save it . Next tiem when you create query on the same info provider it should appear in the left hand side as readymade reusable piece .
    Hope that helps.
    Regards
    Mr Kapadia

  • Currency translation for a restricted key figure in Query designer

    Dear Experts,
    In my query i am using a restricted Keyfigure (ZRKF1 which is reusable). I have to change the currency translation key of the restricted Key Figure  from zcur1 to zcur2. I am not able to edit zrkf1 Currency translation in the properties( It is in gray colour) ,while i can do it for a normal keyfigure.  if i edit zrkf1 then other queries will be affected. How should i solve this? Can i copy and paste the zrkf1 to zrkf2 in order to use zrkf2 with currency translation zcur2 in my query ? How can i coy and paste restricted key figure?
    Thanks,
    Riya

    Hello Riya
    I think you can't change the currency transaltion type for RKF... to change it in RKF just make the changes in the KF which you have used in RKF....
    If you don't want to change the CURR translation type in KF1 than copy it paste it (KF2)and change in that KF2...now u can use KF2 in restricted KF...
    Thanks
    Tripple k

  • Reg. Bex Error while opening query in query designer!!!!!

    Hi Guys!!
    Can any one help me in getting out of this issue.
    I am getting BEx Error while opening query in query designer as below.
    3:45:00 PM.400: Info: Query Designer Start. Revision: 500
    3:45:06 PM.728: DEBUG ASSERT ### False - QDbCommandManager::.ctor - Method not called from CommandManager
    -CALLING-FROM- 3:45:06 PM.728: DEBUG ASSERT ### False - QDbCommandManager::.ctor - Method not called from CommandManager ---
       at com.sap.bi.et.common.appl.Log.Debug.WriteTraceToFile(Level lLevel, String lString, Exception ex)
       at com.sap.bi.et.common.appl.Log.Debug.Assert(Boolean iExpectedCondition, String iAdditionalInformation, String iDetailedMessage)
       at com.sap.bi.et.QueryDesigner.QDfForm.InitFromCommandManager(QDbCommandManager iCommandManager)
       at com.sap.bi.et.QueryDesigner.QDbCommandManager..ctor(QDbApplicationData iApplicationData, QDfForm iWindow)
       at com.sap.bi.et.QueryDesigner.QDbApplicationData.Init()
       at com.sap.bi.et.QueryDesigner.QDbApplicationData.Run(Boolean iAsApplication)
       at com.sap.bi.et.QueryDesigner.QDbQueryDesigner.Run(Boolean iAsApplication)
       at com.sap.bi.et.QueryDesigner.QDStarter.QDStartup.Main()
    3:45:07 PM.337: DEBUG ASSERT ### False - QDbCommandManager::DoViewCommand - Method not called from CommandManager
    -CALLING-FROM- 3:45:07 PM.337: DEBUG ASSERT ### False - QDbCommandManager::DoViewCommand - Method not called from CommandManager ---
       at com.sap.bi.et.common.appl.Log.Debug.WriteTraceToFile(Level lLevel, String lString, Exception ex)
       at com.sap.bi.et.common.appl.Log.Debug.Assert(Boolean iExpectedCondition, String iAdditionalInformation, String iDetailedMessage)
       at com.sap.bi.et.QueryDesigner.QDbCommandBase.Execute()
       at com.sap.bi.et.QueryDesigner.QDbCommandManager.DoViewCommand(QDeAreaType iAreaType, QDeViewOpenMode iOpenMode)
       at com.sap.bi.et.QueryDesigner.QDbApplicationData.OutputInvoke()
       at System.RuntimeMethodHandle._InvokeMethodFast(Object target, Object[] arguments, SignatureStruct& sig, MethodAttributes methodAttributes, RuntimeTypeHandle typeOwner)
       at System.RuntimeMethodHandle.InvokeMethodFast(Object target, Object[] arguments, Signature sig, MethodAttributes methodAttributes, RuntimeTypeHandle typeOwner)
       at System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture, Boolean skipVisibilityChecks)
       at System.Delegate.DynamicInvokeImpl(Object[] args)
       at System.Windows.Forms.Control.InvokeMarshaledCallbackDo(ThreadMethodEntry tme)
       at System.Windows.Forms.Control.InvokeMarshaledCallbackHelper(Object obj)
       at System.Threading.ExecutionContext.runTryCode(Object userData)
       at System.Runtime.CompilerServices.RuntimeHelpers.ExecuteCodeWithGuaranteedCleanup(TryCode code, CleanupCode backoutCode, Object userData)
       at System.Threading.ExecutionContext.RunInternal(ExecutionContext executionContext, ContextCallback callback, Object state)
       at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state)
       at System.Windows.Forms.Control.InvokeMarshaledCallback(ThreadMethodEntry tme)
       at System.Windows.Forms.Control.InvokeMarshaledCallbacks()
       at System.Windows.Forms.Control.WndProc(Message& m)
       at System.Windows.Forms.ScrollableControl.WndProc(Message& m)
       at System.Windows.Forms.ContainerControl.WndProc(Message& m)
       at System.Windows.Forms.Form.WndProc(Message& m)
       at System.Windows.Forms.Control.ControlNativeWindow.OnMessage(Message& m)
       at System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m)
       at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
       at System.Windows.Forms.NativeWindow.DefWndProc(Message& m)
       at System.Windows.Forms.NativeWindow.WndProc(Message& m)
       at Syncfusion.Windows.Forms.Tools.CommandBarController.AppMainFormWnd.WndProc(Message& m)
       at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
       at System.Windows.Forms.NativeWindow.DefWndProc(Message& m)
       at System.Windows.Forms.NativeWindow.WndProc(Message& m)
       at Syncfusion.Windows.Forms.Tools.XPMenus.MenuActivationControl.WndProc(Message& m)
       at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
       at System.Windows.Forms.NativeWindow.DefWndProc(Message& m)
       at System.Windows.Forms.NativeWindow.WndProc(Message& m)
       at Syncfusion.Windows.Forms.Tools.XPMenus.FormNativeWindow.WndProc(Message& m)
       at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
       at System.Windows.Forms.UnsafeNativeMethods.DispatchMessageW(MSG& msg)
       at System.Windows.Forms.Application.ComponentManager.System.Windows.Forms.UnsafeNativeMethods.IMsoComponentManager.FPushMessageLoop(Int32 dwComponentID, Int32 reason, Int32 pvLoopData)
       at System.Windows.Forms.Application.ThreadContext.RunMessageLoopInner(Int32 reason, ApplicationContext context)
       at System.Windows.Forms.Application.ThreadContext.RunMessageLoop(Int32 reason, ApplicationContext context)
       at System.Windows.Forms.Application.Run(Form mainForm)
       at com.sap.bi.et.QueryDesigner.QDbApplicationData.Run(Boolean iAsApplication)
       at com.sap.bi.et.QueryDesigner.QDbQueryDesigner.Run(Boolean iAsApplication)
       at com.sap.bi.et.QueryDesigner.QDStarter.QDStartup.Main()
    QDbCommandManager::DoViewCommand  - Table View
    3:45:07 PM.368: DEBUG ASSERT ### False - QDbCommandManager::DoViewCommand - Method not called from CommandManager
    -CALLING-FROM- 3:45:07 PM.368: DEBUG ASSERT ### False - QDbCommandManager::DoViewCommand - Method not called from CommandManager ---
       at com.sap.bi.et.common.appl.Log.Debug.WriteTraceToFile(Level lLevel, String lString, Exception ex)
       at com.sap.bi.et.common.appl.Log.Debug.Assert(Boolean iExpectedCondition, String iAdditionalInformation, String iDetailedMessage)
       at com.sap.bi.et.QueryDesigner.QDbCommandBase.Execute()
       at com.sap.bi.et.QueryDesigner.QDbCommandManager.DoViewCommand(QDeAreaType iAreaType, QDeViewOpenMode iOpenMode)
       at com.sap.bi.et.QueryDesigner.QDbApplicationData.OutputInvoke()
       at System.RuntimeMethodHandle._InvokeMethodFast(Object target, Object[] arguments, SignatureStruct& sig, MethodAttributes methodAttributes, RuntimeTypeHandle typeOwner)
       at System.RuntimeMethodHandle.InvokeMethodFast(Object target, Object[] arguments, Signature sig, MethodAttributes methodAttributes, RuntimeTypeHandle typeOwner)
       at System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture, Boolean skipVisibilityChecks)
       at System.Delegate.DynamicInvokeImpl(Object[] args)
       at System.Windows.Forms.Control.InvokeMarshaledCallbackDo(ThreadMethodEntry tme)
       at System.Windows.Forms.Control.InvokeMarshaledCallbackHelper(Object obj)
       at System.Threading.ExecutionContext.runTryCode(Object userData)
       at System.Runtime.CompilerServices.RuntimeHelpers.ExecuteCodeWithGuaranteedCleanup(TryCode code, CleanupCode backoutCode, Object userData)
       at System.Threading.ExecutionContext.RunInternal(ExecutionContext executionContext, ContextCallback callback, Object state)
       at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state)
       at System.Windows.Forms.Control.InvokeMarshaledCallback(ThreadMethodEntry tme)
       at System.Windows.Forms.Control.InvokeMarshaledCallbacks()
       at System.Windows.Forms.Control.WndProc(Message& m)
       at System.Windows.Forms.ScrollableControl.WndProc(Message& m)
       at System.Windows.Forms.ContainerControl.WndProc(Message& m)
       at System.Windows.Forms.Form.WndProc(Message& m)
       at System.Windows.Forms.Control.ControlNativeWindow.OnMessage(Message& m)
       at System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m)
       at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
       at System.Windows.Forms.NativeWindow.DefWndProc(Message& m)
       at System.Windows.Forms.NativeWindow.WndProc(Message& m)
       at Syncfusion.Windows.Forms.Tools.CommandBarController.AppMainFormWnd.WndProc(Message& m)
       at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
       at System.Windows.Forms.NativeWindow.DefWndProc(Message& m)
       at System.Windows.Forms.NativeWindow.WndProc(Message& m)
       at Syncfusion.Windows.Forms.Tools.XPMenus.MenuActivationControl.WndProc(Message& m)
       at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
       at System.Windows.Forms.NativeWindow.DefWndProc(Message& m)
       at System.Windows.Forms.NativeWindow.WndProc(Message& m)
       at Syncfusion.Windows.Forms.Tools.XPMenus.FormNativeWindow.WndProc(Message& m)
       at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
       at System.Windows.Forms.UnsafeNativeMethods.DispatchMessageW(MSG& msg)
       at System.Windows.Forms.Application.ComponentManager.System.Windows.Forms.UnsafeNativeMethods.IMsoComponentManager.FPushMessageLoop(Int32 dwComponentID, Int32 reason, Int32 pvLoopData)
       at System.Windows.Forms.Application.ThreadContext.RunMessageLoopInner(Int32 reason, ApplicationContext context)
       at System.Windows.Forms.Application.ThreadContext.RunMessageLoop(Int32 reason, ApplicationContext context)
       at System.Windows.Forms.Application.Run(Form mainForm)
       at com.sap.bi.et.QueryDesigner.QDbApplicationData.Run(Boolean iAsApplication)
       at com.sap.bi.et.QueryDesigner.QDbQueryDesigner.Run(Boolean iAsApplication)
       at com.sap.bi.et.QueryDesigner.QDStarter.QDStartup.Main()
    QDbCommandManager::DoViewCommand  - Rows/Columns
    3:45:07 PM.431: DEBUG ASSERT ### False - QDbCommandManager::DoViewCommand - Method not called from CommandManager
    -CALLING-FROM- 3:45:07 PM.431: DEBUG ASSERT ### False - QDbCommandManager::DoViewCommand - Method not called from CommandManager ---
       at com.sap.bi.et.common.appl.Log.Debug.WriteTraceToFile(Level lLevel, String lString, Exception ex)
       at com.sap.bi.et.common.appl.Log.Debug.Assert(Boolean iExpectedCondition, String iAdditionalInformation, String iDetailedMessage)
       at com.sap.bi.et.QueryDesigner.QDbCommandBase.Execute()
       at com.sap.bi.et.QueryDesigner.QDbCommandManager.DoViewCommand(QDeAreaType iAreaType, QDeViewOpenMode iOpenMode)
       at com.sap.bi.et.QueryDesigner.QDbApplicationData.OutputInvoke()
       at System.RuntimeMethodHandle._InvokeMethodFast(Object target, Object[] arguments, SignatureStruct& sig, MethodAttributes methodAttributes, RuntimeTypeHandle typeOwner)
       at System.RuntimeMethodHandle.InvokeMethodFast(Object target, Object[] arguments, Signature sig, MethodAttributes methodAttributes, RuntimeTypeHandle typeOwner)
       at System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture, Boolean skipVisibilityChecks)
       at System.Delegate.DynamicInvokeImpl(Object[] args)
       at System.Windows.Forms.Control.InvokeMarshaledCallbackDo(ThreadMethodEntry tme)
       at System.Windows.Forms.Control.InvokeMarshaledCallbackHelper(Object obj)
       at System.Threading.ExecutionContext.runTryCode(Object userData)
       at System.Runtime.CompilerServices.RuntimeHelpers.ExecuteCodeWithGuaranteedCleanup(TryCode code, CleanupCode backoutCode, Object userData)
       at System.Threading.ExecutionContext.RunInternal(ExecutionContext executionContext, ContextCallback callback, Object state)
       at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state)
       at System.Windows.Forms.Control.InvokeMarshaledCallback(ThreadMethodEntry tme)
       at System.Windows.Forms.Control.InvokeMarshaledCallbacks()
       at System.Windows.Forms.Control.WndProc(Message& m)
       at System.Windows.Forms.ScrollableControl.WndProc(Message& m)
       at System.Windows.Forms.ContainerControl.WndProc(Message& m)
       at System.Windows.Forms.Form.WndProc(Message& m)
       at System.Windows.Forms.Control.ControlNativeWindow.OnMessage(Message& m)
       at System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m)
       at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
       at System.Windows.Forms.NativeWindow.DefWndProc(Message& m)
       at System.Windows.Forms.NativeWindow.WndProc(Message& m)
       at Syncfusion.Windows.Forms.Tools.CommandBarController.AppMainFormWnd.WndProc(Message& m)
       at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
       at System.Windows.Forms.NativeWindow.DefWndProc(Message& m)
       at System.Windows.Forms.NativeWindow.WndProc(Message& m)
       at Syncfusion.Windows.Forms.Tools.XPMenus.MenuActivationControl.WndProc(Message& m)
       at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
       at System.Windows.Forms.NativeWindow.DefWndProc(Message& m)
       at System.Windows.Forms.NativeWindow.WndProc(Message& m)
       at Syncfusion.Windows.Forms.Tools.XPMenus.FormNativeWindow.WndProc(Message& m)
       at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
       at System.Windows.Forms.UnsafeNativeMethods.DispatchMessageW(MSG& msg)
       at System.Windows.Forms.Application.ComponentManager.System.Windows.Forms.UnsafeNativeMethods.IMsoComponentManager.FPushMessageLoop(Int32 dwComponentID, Int32 reason, Int32 pvLoopData)
       at System.Windows.Forms.Application.ThreadContext.RunMessageLoopInner(Int32 reason, ApplicationContext context)
       at System.Windows.Forms.Application.ThreadContext.RunMessageLoop(Int32 reason, ApplicationContext context)
       at System.Windows.Forms.Application.Run(Form mainForm)
       at com.sap.bi.et.QueryDesigner.QDbApplicationData.Run(Boolean iAsApplication)
       at com.sap.bi.et.QueryDesigner.QDbQueryDesigner.Run(Boolean iAsApplication)
       at com.sap.bi.et.QueryDesigner.QDStarter.QDStartup.Main()
    QDbCommandManager::DoViewCommand  - Cells
    3:45:07 PM.446: DEBUG ASSERT ### False - QDbCommandManager::DoViewCommand - Method not called from CommandManager
    -CALLING-FROM- 3:45:07 PM.446: DEBUG ASSERT ### False - QDbCommandManager::DoViewCommand - Method not called from CommandManager ---
       at com.sap.bi.et.common.appl.Log.Debug.WriteTraceToFile(Level lLevel, String lString, Exception ex)
       at com.sap.bi.et.common.appl.Log.Debug.Assert(Boolean iExpectedCondition, String iAdditionalInformation, String iDetailedMessage)
       at com.sap.bi.et.QueryDesigner.QDbCommandBase.Execute()
       at com.sap.bi.et.QueryDesigner.QDbCommandManager.DoViewCommand(QDeAreaType iAreaType, QDeViewOpenMode iOpenMode)
       at com.sap.bi.et.QueryDesigner.QDbApplicationData.OutputInvoke()
       at System.RuntimeMethodHandle._InvokeMethodFast(Object target, Object[] arguments, SignatureStruct& sig, MethodAttributes methodAttributes, RuntimeTypeHandle typeOwner)
       at System.RuntimeMethodHandle.InvokeMethodFast(Object target, Object[] arguments, Signature sig, MethodAttributes methodAttributes, RuntimeTypeHandle typeOwner)
       at System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture, Boolean skipVisibilityChecks)
       at System.Delegate.DynamicInvokeImpl(Object[] args)
       at System.Windows.Forms.Control.InvokeMarshaledCallbackDo(ThreadMethodEntry tme)
       at System.Windows.Forms.Control.InvokeMarshaledCallbackHelper(Object obj)
       at System.Threading.ExecutionContext.runTryCode(Object userData)
       at System.Runtime.CompilerServices.RuntimeHelpers.ExecuteCodeWithGuaranteedCleanup(TryCode code, CleanupCode backoutCode, Object userData)
       at System.Threading.ExecutionContext.RunInternal(ExecutionContext executionContext, ContextCallback callback, Object state)
       at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state)
       at System.Windows.Forms.Control.InvokeMarshaledCallback(ThreadMethodEntry tme)
       at System.Windows.Forms.Control.InvokeMarshaledCallbacks()
       at System.Windows.Forms.Control.WndProc(Message& m)
       at System.Windows.Forms.ScrollableControl.WndProc(Message& m)
       at System.Windows.Forms.ContainerControl.WndProc(Message& m)
       at System.Windows.Forms.Form.WndProc(Message& m)
       at System.Windows.Forms.Control.ControlNativeWindow.OnMessage(Message& m)
       at System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m)
       at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
       at System.Windows.Forms.NativeWindow.DefWndProc(Message& m)
       at System.Windows.Forms.NativeWindow.WndProc(Message& m)
       at Syncfusion.Windows.Forms.Tools.CommandBarController.AppMainFormWnd.WndProc(Message& m)
       at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
       at System.Windows.Forms.NativeWindow.DefWndProc(Message& m)
       at System.Windows.Forms.NativeWindow.WndProc(Message& m)
       at Syncfusion.Windows.Forms.Tools.XPMenus.MenuActivationControl.WndProc(Message& m)
       at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
       at System.Windows.Forms.NativeWindow.DefWndProc(Message& m)
       at System.Windows.Forms.NativeWindow.WndProc(Message& m)
       at Syncfusion.Windows.Forms.Tools.XPMenus.FormNativeWindow.WndProc(Message& m)
       at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
       at System.Windows.Forms.UnsafeNativeMethods.DispatchMessageW(MSG& msg)
       at System.Windows.Forms.Application.ComponentManager.System.Windows.Forms.UnsafeNativeMethods.IMsoComponentManager.FPushMessageLoop(Int32 dwComponentID, Int32 reason, Int32 pvLoopData)
       at System.Windows.Forms.Application.ThreadContext.RunMessageLoopInner(Int32 reason, ApplicationContext context)
       at System.Windows.Forms.Application.ThreadContext.RunMessageLoop(Int32 reason, ApplicationContext context)
       at System.Windows.Forms.Application.Run(Form mainForm)
       at com.sap.bi.et.QueryDesigner.QDbApplicationData.Run(Boolean iAsApplication)
       at com.sap.bi.et.QueryDesigner.QDbQueryDesigner.Run(Boolean iAsApplication)
       at com.sap.bi.et.QueryDesigner.QDStarter.QDStartup.Main()
    QDbCommandManager::DoViewCommand  - Conditions
    3:45:07 PM.446: DEBUG ASSERT ### False - QDbCommandManager::DoViewCommand - Method not called from CommandManager
    -CALLING-FROM- 3:45:07 PM.446: DEBUG ASSERT ### False - QDbCommandManager::DoViewCommand - Method not called from CommandManager ---
       at com.sap.bi.et.common.appl.Log.Debug.WriteTraceToFile(Level lLevel, String lString, Exception ex)
       at com.sap.bi.et.common.appl.Log.Debug.Assert(Boolean iExpectedCondition, String iAdditionalInformation, String iDetailedMessage)
       at com.sap.bi.et.QueryDesigner.QDbCommandBase.Execute()
       at com.sap.bi.et.QueryDesigner.QDbCommandManager.DoViewCommand(QDeAreaType iAreaType, QDeViewOpenMode iOpenMode)
       at com.sap.bi.et.QueryDesigner.QDbApplicationData.OutputInvoke()
       at System.RuntimeMethodHandle._InvokeMethodFast(Object target, Object[] arguments, SignatureStruct& sig, MethodAttributes methodAttributes, RuntimeTypeHandle typeOwner)
       at System.RuntimeMethodHandle.InvokeMethodFast(Object target, Object[] arguments, Signature sig, MethodAttributes methodAttributes, RuntimeTypeHandle typeOwner)
       at System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture, Boolean skipVisibilityChecks)
       at System.Delegate.DynamicInvokeImpl(Object[] args)
       at System.Windows.Forms.Control.InvokeMarshaledCallbackDo(ThreadMethodEntry tme)
       at System.Windows.Forms.Control.InvokeMarshaledCallbackHelper(Object obj)
       at System.Threading.ExecutionContext.runTryCode(Object userData)
       at System.Runtime.CompilerServices.RuntimeHelpers.ExecuteCodeWithGuaranteedCleanup(TryCode code, CleanupCode backoutCode, Object userData)
       at System.Threading.ExecutionContext.RunInternal(ExecutionContext executionContext, ContextCallback callback, Object state)
       at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state)
       at System.Windows.Forms.Control.InvokeMarshaledCallback(ThreadMethodEntry tme)
       at System.Windows.Forms.Control.InvokeMarshaledCallbacks()
       at System.Windows.Forms.Control.WndProc(Message& m)
       at System.Windows.Forms.ScrollableControl.WndProc(Message& m)
       at System.Windows.Forms.ContainerControl.WndProc(Message& m)
       at System.Windows.Forms.Form.WndProc(Message& m)
       at System.Windows.Forms.Control.ControlNativeWindow.OnMessage(Message& m)
       at System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m)
       at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
       at System.Windows.Forms.NativeWindow.DefWndProc(Message& m)
       at System.Windows.Forms.NativeWindow.WndProc(Message& m)
       at Syncfusion.Windows.Forms.Tools.CommandBarController.AppMainFormWnd.WndProc(Message& m)
       at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
       at System.Windows.Forms.NativeWindow.DefWndProc(Message& m)
       at System.Windows.Forms.NativeWindow.WndProc(Message& m)
       at Syncfusion.Windows.Forms.Tools.XPMenus.MenuActivationControl.WndProc(Message& m)
       at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
       at System.Windows.Forms.NativeWindow.DefWndProc(Message& m)
       at System.Windows.Forms.NativeWindow.WndProc(Message& m)
       at Syncfusion.Windows.Forms.Tools.XPMenus.FormNativeWindow.WndProc(Message& m)
       at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
       at System.Windows.Forms.UnsafeNativeMethods.DispatchMessageW(MSG& msg)
       at System.Windows.Forms.Application.ComponentManager.System.Windows.Forms.UnsafeNativeMethods.IMsoComponentManager.FPushMessageLoop(Int32 dwComponentID, Int32 reason, Int32 pvLoopData)
       at System.Windows.Forms.Application.ThreadContext.RunMessageLoopInner(Int32 reason, ApplicationContext context)
       at System.Windows.Forms.Application.ThreadContext.RunMessageLoop(Int32 reason, ApplicationContext context)
       at System.Windows.Forms.Application.Run(Form mainForm)
       at com.sap.bi.et.QueryDesigner.QDbApplicationData.Run(Boolean iAsApplication)
       at com.sap.bi.et.QueryDesigner.QDbQueryDesigner.Run(Boolean iAsApplication)
       at com.sap.bi.et.QueryDesigner.QDStarter.QDStartup.Main()
    QDbCommandManager::DoViewCommand  - Exceptions
    3:45:07 PM.446: DEBUG ASSERT ### False - QDbCommandManager::DoViewCommand - Method not called from CommandManager
    -CALLING-FROM- 3:45:07 PM.446: DEBUG ASSERT ### False - QDbCommandManager::DoViewCommand - Method not called from CommandManager ---
       at com.sap.bi.et.common.appl.Log.Debug.WriteTraceToFile(Level lLevel, String lString, Exception ex)
       at com.sap.bi.et.common.appl.Log.Debug.Assert(Boolean iExpectedCondition, String iAdditionalInformation, String iDetailedMessage)
       at com.sap.bi.et.QueryDesigner.QDbCommandBase.Execute()
       at com.sap.bi.et.QueryDesigner.QDbCommandManager.DoViewCommand(QDeAreaType iAreaType, QDeViewOpenMode iOpenMode)
       at com.sap.bi.et.QueryDesigner.QDbApplicationData.OutputInvoke()
       at System.RuntimeMethodHandle._InvokeMethodFast(Object target, Object[] arguments, SignatureStruct& sig, MethodAttributes methodAttributes, RuntimeTypeHandle typeOwner)
       at System.RuntimeMethodHandle.InvokeMethodFast(Object target, Object[] arguments, Signature sig, MethodAttributes methodAttributes, RuntimeTypeHandle typeOwner)
       at System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture, Boolean skipVisibilityChecks)
       at System.Delegate.DynamicInvokeImpl(Object[] args)
       at System.Windows.Forms.Control.InvokeMarshaledCallbackDo(ThreadMethodEntry tme)
       at System.Windows.Forms.Control.InvokeMarshaledCallbackHelper(Object obj)
       at System.Threading.ExecutionContext.runTryCode(Object userData)
       at System.Runtime.CompilerServices.RuntimeHelpers.ExecuteCodeWithGuaranteedCleanup(TryCode code, CleanupCode backoutCode, Object userData)
       at System.Threading.ExecutionContext.RunInternal(ExecutionContext executionContext, ContextCallback callback, Object state)
       at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state)
       at System.Windows.Forms.Control.InvokeMarshaledCallback(ThreadMethodEntry tme)
       at System.Windows.Forms.Control.InvokeMarshaledCallbacks()
       at System.Windows.Forms.Control.WndProc(Message& m)
       at System.Windows.Forms.ScrollableControl.WndProc(Message& m)
       at System.Windows.Forms.ContainerControl.WndProc(Message& m)
       at System.Windows.Forms.Form.WndProc(Message& m)
       at System.Windows.Forms.Control.ControlNativeWindow.OnMessage(Message& m)
       at System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m)
       at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
       at System.Windows.Forms.NativeWindow.DefWndProc(Message& m)
       at System.Windows.Forms.NativeWindow.WndProc(Message& m)
       at Syncfusion.Windows.Forms.Tools.CommandBarController.AppMainFormWnd.WndProc(Message& m)
       at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
       at System.Windows.Forms.NativeWindow.DefWndProc(Message& m)
       at System.Windows.Forms.NativeWindow.WndProc(Message& m)
       at Syncfusion.Windows.Forms.Tools.XPMenus.MenuActivationControl.WndProc(Message& m)
       at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
       at System.Windows.Forms.NativeWindow.DefWndProc(Message& m)
       at System.Windows.Forms.NativeWindow.WndProc(Message& m)
       at Syncfusion.Windows.Forms.Tools.XPMenus.FormNativeWindow.WndProc(Message& m)
       at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
       at System.Windows.Forms.UnsafeNativeMethods.DispatchMessageW(MSG& msg)
       at System.Windows.Forms.Application.ComponentManager.System.Windows.Forms.UnsafeNativeMethods.IMsoComponentManager.FPushMessageLoop(Int32 dwComponentID, Int32 reason, Int32 pvLoopData)
       at System.Windows.Forms.Application.ThreadContext.RunMessageLoopInner(Int32 reason, ApplicationContext context)
       at System.Windows.Forms.Application.ThreadContext.RunMessageLoop(Int32 reason, ApplicationContext context)
       at System.Windows.Forms.Application.Run(Form mainForm)
       at com.sap.bi.et.QueryDesigner.QDbApplicationData.Run(Boolean iAsApplication)
       at com.sap.bi.et.QueryDesigner.QDbQueryDesigner.Run(Boolean iAsApplication)
       at com.sap.bi.et.QueryDesigner.QDStarter.QDStartup.Main()
    QDbCommandManager::DoViewCommand  - InfoProvider
    3:45:07 PM.446: DEBUG ASSERT ### False - QDbCommandManager::DoViewCommand - Method not called from CommandManager
    -CALLING-FROM- 3:45:07 PM.446: DEBUG ASSERT ### False - QDbCommandManager::DoViewCommand - Method not called from CommandManager ---
       at com.sap.bi.et.common.appl.Log.Debug.WriteTraceToFile(Level lLevel, String lString, Exception ex)
       at com.sap.bi.et.common.appl.Log.Debug.Assert(Boolean iExpectedCondition, String iAdditionalInformation, String iDetailedMessage)
       at com.sap.bi.et.QueryDesigner.QDbCommandBase.Execute()
       at com.sap.bi.et.QueryDesigner.QDbCommandManager.DoViewCommand(QDeAreaType iAreaType, QDeViewOpenMode iOpenMode)
       at com.sap.bi.et.QueryDesigner.QDbApplicationData.OutputInvoke()
       at System.RuntimeMethodHandle._InvokeMethodFast(Object target, Object[] arguments, SignatureStruct& sig, MethodAttributes methodAttributes, RuntimeTypeHandle typeOwner)
       at System.RuntimeMethodHandle.InvokeMethodFast(Object target, Object[] arguments, Signature sig, MethodAttributes methodAttributes, RuntimeTypeHandle typeOwner)
       at System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture, Boolean skipVisibilityChecks)
       at System.Delegate.DynamicInvokeImpl(Object[] args)
       at System.Windows.Forms.Control.InvokeMarshaledCallbackDo(ThreadMethodEntry tme)
       at System.Windows.Forms.Control.InvokeMarshaledCallbackHelper(Object obj)
       at System.Threading.ExecutionContext.runTryCode(Object userData)
       at System.Runtime.CompilerServices.RuntimeHelpers.ExecuteCodeWithGuaranteedCleanup(TryCode code, CleanupCode backoutCode, Object userData)
       at System.Threading.ExecutionContext.RunInternal(ExecutionContext executionContext, ContextCallback callback, Object state)
       at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state)
       at System.Windows.Forms.Control.InvokeMarshaledCallback(ThreadMethodEntry tme)
       at System.Windows.Forms.Control.InvokeMarshaledCallbacks()
       at System.Windows.Forms.Control.WndProc(Message& m)
       at System.Windows.Forms.ScrollableControl.WndProc(Message& m)
       at System.Windows.Forms.ContainerControl.WndProc(Message& m)
       at System.Windows.Forms.Form.WndProc(Message& m)
       at System.Windows.Forms.Control.ControlNativeWindow.OnMessage(Message& m)
       at System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m)
       at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
       at System.Windows.Forms.NativeWindow.DefWndProc(Message& m)
       at System.Windows.Forms.NativeWindow.WndProc(Message& m)
       at Syncfusion.Windows.Forms.Tools.CommandBarController.AppMainFormWnd.WndProc(Message& m)
       at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
       at System.Windows.Forms.NativeWindow.DefWndProc(Message& m)
       at System.Windows.Forms.NativeWindow.WndProc(Message& m)
       at Syncfusion.Windows.Forms.Tools.XPMenus.MenuActivationControl.WndProc(Message& m)
       at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
       at System.Windows.Forms.NativeWindow.DefWndProc(Message& m)
       at System.Windows.Forms.NativeWindow.WndProc(Message& m)
       at Syncfusion.Windows.Forms.Tools.XPMenus.FormNativeWindow.WndProc(Message& m)
       at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
       at System.Windows.Forms.UnsafeNativeMethods.DispatchMessageW(MSG& msg)
       at System.Windows.Forms.Application.ComponentManager.System.Windows.Forms.UnsafeNativeMethods.IMsoComponentManager.FPushMessageLoop(Int32 dwComponentID, Int32 reason, Int32 pvLoopData)
       at System.Windows.Forms.Application.ThreadContext.RunMessageLoopInner(Int32 reason, ApplicationContext context)
       at System.Windows.Forms.Application.ThreadContext.RunMessageLoop(Int32 reason, ApplicationContext context)
       at System.Windows.Forms.Application.Run(Form mainForm)
       at com.sap.bi.et.QueryDesigner.QDbApplicationData.Run(Boolean iAsApplication)
       at com.sap.bi.et.QueryDesigner.QDbQueryDesigner.Run(Boolean iAsApplication)
       at com.sap.bi.et.QueryDesigner.QDStarter.QDStartup.Main()
    QDbCommandManager::DoViewCommand  - Filter
    QDbCommandManager::CommandExecute  - Properties
    QDbCommandManager::DoViewCommand  - Properties
    QDdEventDispatcher::MenuItemClickedHandler - Bar clicked: OpenQuery
    QDbCommandManager::CommandExecute  - Open...
    OSDialogForm caught Exception: GetNodes: RFC Exception
    -EXCEPTION-START- 3:45:19 PM.24: TRACE EXCEPTION  ---
    Exception Name: ObjectDisposedException
    Exception Message: Cannot access a disposed object.
    Object name: 'OSDialogForm'.
    Exception    at System.Windows.Forms.Control.MarshaledInvoke(Control caller, Delegate method, Object[] args, Boolean synchronous)
       at System.Windows.Forms.Control.Invoke(Delegate method, Object[] args)
       at System.Windows.Forms.Control.Invoke(Delegate method)
       at com.sap.bi.et.BExOpenSaveServices.OSDialogForm.mController_CurrentFolderNodesUpdated(Object sender)
       at com.sap.bi.et.BExOpenSaveServices.OSDlgController.EndReadFolderNodes(OSFolderInfo piFolderInfo)
       at com.sap.bi.et.BExOpenSaveServices.OSDlgController.OSRequestFolderNodes.Callback(IAsyncResult ar)
       at System.Runtime.Remoting.Messaging.AsyncResult.SyncProcessMessage(IMessage msg)
       at System.Runtime.Remoting.Messaging.StackBuilderSink.AsyncProcessMessage(IMessage msg, IMessageSink replySink)
       at System.Runtime.Remoting.Proxies.AgileAsyncWorkerItem.ThreadPoolCallBack(Object o)
       at System.Threading._ThreadPoolWaitCallback.WaitCallback_Context(Object state)
       at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state)
       at System.Threading._ThreadPoolWaitCallback.PerformWaitCallback(Object state)
    Full Stack:   at com.sap.bi.et.common.appl.Log.Debug.WriteTraceToFile(Level lLevel, String lString, Exception ex)
       at com.sap.bi.et.common.appl.Log.Trace.Exception(Exception ex, String iAdditionalInformation)
       at com.sap.bi.et.QueryDesigner.QDbApplicationData.AppDomainUnhandledException(Object iSender, UnhandledExceptionEventArgs iEventArgs)
       at System.Windows.Forms.Control.MarshaledInvoke(Control caller, Delegate method, Object[] args, Boolean synchronous)
       at System.Windows.Forms.Control.Invoke(Delegate method, Object[] args)
       at System.Windows.Forms.Control.Invoke(Delegate method)
       at com.sap.bi.et.BExOpenSaveServices.OSDialogForm.mController_CurrentFolderNodesUpdated(Object sender)
       at com.sap.bi.et.BExOpenSaveServices.OSDlgController.EndReadFolderNodes(OSFolderInfo piFolderInfo)
       at com.sap.bi.et.BExOpenSaveServices.OSDlgController.OSRequestFolderNodes.Callback(IAsyncResult ar)
       at System.Runtime.Remoting.Messaging.AsyncResult.SyncProcessMessage(IMessage msg)
       at System.Runtime.Remoting.Messaging.StackBuilderSink.AsyncProcessMessage(IMessage msg, IMessageSink replySink)
       at System.Runtime.Remoting.Proxies.AgileAsyncWorkerItem.ThreadPoolCallBack(Object o)
       at System.Threading._ThreadPoolWaitCallback.WaitCallback_Context(Object state)
       at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state)
       at System.Threading._ThreadPoolWaitCallback.PerformWaitCallback(Object state)
    -EXCEPTION-END----
    -CALLING-FROM- 3:45:19 PM.24: TRACE EXCEPTION  ---
       at com.sap.bi.et.common.appl.Log.Debug.WriteTraceToFile(Level lLevel, String lString, Exception ex)
       at com.sap.bi.et.common.appl.Log.Trace.Exception(Exception ex, String iAdditionalInformation)
       at com.sap.bi.et.QueryDesigner.QDbApplicationData.AppDomainUnhandledException(Object iSender, UnhandledExceptionEventArgs iEventArgs)
       at System.Windows.Forms.Control.MarshaledInvoke(Control caller, Delegate method, Object[] args, Boolean synchronous)
       at System.Windows.Forms.Control.Invoke(Delegate method, Object[] args)
       at System.Windows.Forms.Control.Invoke(Delegate method)
       at com.sap.bi.et.BExOpenSaveServices.OSDialogForm.mController_CurrentFolderNodesUpdated(Object sender)
       at com.sap.bi.et.BExOpenSaveServices.OSDlgController.EndReadFolderNodes(OSFolderInfo piFolderInfo)
       at com.sap.bi.et.BExOpenSaveServices.OSDlgController.OSRequestFolderNodes.Callback(IAsyncResult ar)
       at System.Runtime.Remoting.Messaging.AsyncResult.SyncProcessMessage(IMessage msg)
       at System.Runtime.Remoting.Messaging.StackBuilderSink.AsyncProcessMessage(IMessage msg, IMessageSink replySink)
       at System.Runtime.Remoting.Proxies.AgileAsyncWorkerItem.ThreadPoolCallBack(Object o)
       at System.Threading._ThreadPoolWaitCallback.WaitCallback_Context(Object state)
       at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state)
       at System.Threading._ThreadPoolWaitCallback.PerformWaitCallback(Object state)
    Thanks in advance
    Peter

    Hi
    If I got your question properly, you have SAP GUI Installation issues , Try to install relevant Excel version too.
    http://help.sap.com/saphelp_nw70/helpdata/en/9c/03a042b443c56ae10000000a155106/frameset.htm
    BASIS Team can help you in this.
    Hope it helps

  • Error CL_RSD_MULTIPROV  in Query Designer while restricting Key Figures

    Hello,
    I am trying to create Query on Multiprovider in Production envirnoment.
    I drag  key figure in row and try to restrict it to Product Hierarchies as I don't want to create restricted  Key figure.
    While Saving Query I am getting following  Error Massage.
    'System error in Program CL_RSD_MULTIPROV and Form GET_PART_IOBJNM_CMP-01'.
    When I save Query without giving any restriction in Key Figure . I could save it.
    Please suggest in above error.
    Thanks and Regards,

    Hi,
    Check the note 1090490.
    hope this helps,
    Regards,
    Rama Murthy.

  • Problem with restricted key-figure using off-set variable

    Hello Gurus,
    I have created a query in Bex Query Designer with a key figure restricted. This key figure shows me the 0amount value for the last month. When I select 003.2009, the key figure brings the 002.2009 values. I used an off-set variable to do this
    It works!
    But when I show this key-figure in Webi, no value shows up on the table.
    Any suggestions?
    tks
    Edited by: Allisson Valverde on Jul 23, 2010 12:12 AM

    Which variable are you using in BEx and in WEBI to restrict the month/year?

  • Can't change a Restricted Key Figure technical name in QD BEx 7.1.0

    A few days ago I created a new Restricted Key Figure in Query Designer and it was autopopulated with a default technical name.  So I immediately changed it to 'ZRNPVORDINTFACTPPP_FY'.
    Now, today, I realized that the 'F' in the technical name is a typographical error and I need to remove it.  I clicked the Restricted Key Figure on the left from within the list and clicked the Change/Display pencil icon in the properties window, but the Technical Name field is still greyed out.  Also tried right clicking and selecting Edit, but same problem.
    Would removing all instances of where the figure is used in the query and other queries allow me to change it?  Could it be a user rights issue?
    As always, thanks for the help!

    Hi,
    After creating a RKF , you cannot change its technical name.
    If the RKF has a lot of restrictions and creation of another similar RKF is a big process ,
    you can create a copy of the same through transaction RSZC.
    In RSZC , give the source and target cube name as the name of the multiprovider on which your query is built,
    select restricted keyfigure ,click on execute ,  in the list which comes after execute find your KF 'ZRNPVORDINTFACTPPP_FY'
    and click on transfer/copy option available.Change the technical name as you want and then click on execute. A similar keyfigure with the desired technical name will be created in query designer ,global keyfigures .
    Replace the same with your Old keyfigure in report.

  • Restricted key figures (from Infoprovider) not showing in multiprovider

    Hi all
    I have created a multi provider joining two info providers.  The infoproviders have many restricted and calculated key figures.
    Do I have to re-create these in the multiprovider ?
    In the infoprovider when I click on edit restricted key figure it says it is reuseable.
    any ideas ?
    thanks in advance

    Hi Sandra,
    In the infoprovider when I click on edit restricted key figure it says it is reuseable This means that it can be used in any query on that info provider not on another infoprovider (like a multi-provider). So, you will need to re-create those KFs on muti-provider.
    Thanks and Regards
    Subray

  • Problem with restricted key figures

    Hi all,
    I have four restricted key figures in my structure each one is restricted  Fiscal period with user entry variable but when i execute the report and check one of the restricted keyfigure is actually not restricting the values.
    suppose user entered 10.2006 in the selection for fiscal period then one of the column Goods receipts QTY which is restricted with Fiscal period display values other than that of 10.2006
    Did anyone faced such problem earlier?
    Please let me know if anyone had a clue.
    Thanks in advance
    Regards
    Ajay

    Hi gopi,
    Thanks for all of the restricted keyfigures it is "include value".
    Regards
    Ajay

  • Problem with Restricted Key figure!

    Hello BW Gurus,
    Currently I am having problem with a report that is using a restricted key figure in the formula. When I filter down this restricted key figure, it is working fine but when I use this restricted key figure in formula that calculate greater than value, its giving me wrong figure and when I calculate less then value, its giving me zero total result. I am drilling down this restricted KF on a hierarchy. Did I miss any setting or do I need to do anything extra for this?
    Please let me know and thanks in Advance,
    Vaghar.

    In that case create two calculated keyfigures CKF1 and CKF2 such that
    CKF1 = ((Count >100)*1 + 0)
    CKF2 = (Count<100)*1 + 0)
    and then define Greater Count as a formula such that
    Greater Count = <b><i>Count</i></b> (CKF1)
    and similarly Lesser Count = <b><i>Count</i></b> (CKF2).
    where <b><i>Count</i></b> is a data function which gives a value of 1 when the operand <>0 and returns a 0 when the operand = 0.
          Hope this helps.

  • Creating a restricted key figure in BI7 reporting

    Hi
    I am creating a restricted key figure globally in BI7 query designer, whenever I try to restrict Calender Year /Month, an error message pops up showing:
    Runtime error '457' (This key is already associated with an element of this collection), when I click ok another message opens
    Runtime error '429' (Active X component can't create object)
    and finally Microsoft VB runtime error
    Automation (The callee(servernot server application) is not applicable and disappeared; all connections are invalid. The call may have executed.
    I am working in BI 7, SAP gui 640 what could be the problem in BI 7???because the same thing is working in BI 3.5 environment.
    Regards
    Indraneel

    Hi Indraneel,
    Try to look for the patch level you are using for SAP GUI, it should be level 14. If lesser than this apply and check. And always disable VB macros.
    Assign points if helps.
    -Harshal

  • Very Very Urgent Issue: Restricted Key Figure does not return any data

    Hi all,
    Please help me solving this urgent issue.
    created customer exit variable on characterstics version and also
    other customer exit variable on Value type.
    I coded that in variable exit. Problem is when I include these in
    restrickted keyfigure My query does not return me any data.
    But if I remove from restrickted key firgure and put it as normal
    charaterstics I see the variable is getting populated.
    Also in RSRT the SQl generated when these are included in RKF is not
    correct.
    I debugged and know they are getting populated. As when included in RKF
    I can also see the values of customer exit variables from information
    tab.
    I also know that there is data in cube for those restrictions.
    I posted one OSS Notes regarding this urgent issue. But got no reply from SAP.
    FYI: We are using BEx 3.5 Browser SAP GUI 6.4 Patch 20 BW Patch 11
    Thanks
    SAP BW
    **Please do not post the same question twice: Very Urgent Issue: Restricted Key Figure does not return any data

    Hi,
    Everyone out there this is very urgent. If someone can help me solving this problem.
    We are using BEx 3.5 Browser SAP GUI 6.4 Patch 20 BW Patch 11.
    I posted one oss notes also regarding this issue. But got no reply from SAP.
    So, Please help me solving this issue.
    Thanks
    SAP BW

Maybe you are looking for

  • How can I change the colour of an adf:inputrender tag

    Hello, I have an jsp page with an input render tag <adf:inputrender model="bindings.OutDateTime" /> Using a choose tag <c:choose> I want to change the colour of the tag if it is a mandatory field The test condition is simple <c:when test="${bindings[

  • Dyanmic csv file downloading with out writing a copy to server

    Hi, Here is my problem, any help most appriciated.. I want to download dynamically created CSV file from the weblogic server, using jsp/servlet communication. I developed a servlet for this and i called that servlet from my jsp page, when user clicks

  • Wrap style

    Hi, I have a report which is a table format with 5 colums such as year,name etc. I want the last column to be printed as multi lines and the rest as single line. This is possible in forms using Wrap style but how to do the same in reports ? Please he

  • Moving average issue

    I found the moving average of material display on mm03 is wrong, I've found that the material ever changed the cost through mr21 on 10/2008, this is correct. But current period is incorrect 02/2009. And after 10.2008, there have two goods receipts, b

  • Compressor shuts down when I try to load a mov file.

    I am trying to make a DVD. I have edited the film in FCP and now want to put it on to DVD but I must use Compressor, the file is about 500meg, about three minutes long. When I set Compressor to do a DVD for me and attempt to load the mov file it clos