Bex Query with Hierarchy on Workbook problem please help

Hi all,
I have a problem, Im trying to copy information from specific cells on a query that I opened using Analyser, heres the situation:
Account            Amount    New Col
22110200           15 dlls
-22110201          4 dlls
-22110202          5 dlls
-22110204          6 dlls
121101010000   1dlls          4 dlls
121101020000   1dlls          5 dlls
121101040000   1dlls          6 dlls
4,5 and 6 dlls are amounts from the first 3 accounts, I tried simpy copying the information but for some reaseon when the report reloads the informacion is lost.
Also I using Hierarchy to display the values so if I copy the value from cell Q700 the value will change is the levels on the Hierarchy are expanded.
Is there anyway to do this? please help.
Thanks in advance

Hi,
Thanks for the answer, Is it possible to call the Macro when the user Expands a node? or it needs to be called from a button or combination of keys?
Thanks again

Similar Messages

Drill Down BeX Query with hierarchy in WEBI

Hi,
I am using a Bex Query with Hierarchy in my WEBI report. Is it possible to drill down ? I am not able to use Scope of Analysis because it is disabled. I am very new to WEBI. Please help me out.
Thanks in Advance.
Lakshmi Mohan

http://www.google.co.in/url?sa=t&rct=j&q=drill%20down%20bex%20query%20with%20hierarchy%20in%20webi%20%20%20&source=web&cd=2&ved=0CDQQFjAB&url=https%3A%2F%2Fcw.sdn.sap.com%2Fcw%2Fservlet%2FJiveServlet%2FpreviewBody%2F137316-102-1-277519%2FWeb%2520Intelligence%2520on%2520SAP%2520implementation%2520best%2520practices.pdf&ei=xofcTpSgF5DJrAeaxpiIBw&usg=AFQjCNHuwDIpvxciPKJyEdoz3GiVjRKgqA
http://www.scribd.com/doc/62293080/40/Query-Drill-for-hierarchies

Accounts Dimension Hierarchy...Problems Please help

Hi All,Iam designing a P&L Cube & a Balance sheet Cube.I have a specific problem---Please read below1. In JDE, Account number is the combination of the BU , Object Account & Sub Account.Seems the unique number of accounts (with Account Numbers) are 1.5 million.Upto (Level 6 in JDE) , Accounts are standard across the Companies or business unitsOne company has several business units.Building hierarchy till level 6(level 6 means level 6 in JDE) may not be a problem in Essbase.The real challenge is after level 6,level 7 level 8 level 9 accounts are there & these are not standard for all business units. They differ for each business unit.For example,Bank Account ( suppose at level 6) for a BU 41100000 , BU 41000000 , BU 40000000Bankone (level 7 ) for the 4110000053 bank (level 7 ) for the 41100000Firstunion ( level 7) for 41000000FleetBank (level 7) for 41000000FleetBank (level 7) for 40000000So in this case how to achieve uniqueness vis-a-vis Essbase.Answer is : Account number which is the combination of the BU , object account & Sub accountBut what worries me is if we have 20,000 (suppose) Business units & we have level 7 accounts on an average 10 per BU, then which means we have to build 20,000 * 10 which is equivalent to 200,000.... if we think of level 8 , same logic continues....so when we build hierarchy.... for 1.5 million unique records we might end up having atleast 500,000 stored members, I think.My solution to this was not to go to level of detail after 6th level in JDE.What is your opinion?Did anyone come across such a situation. The Business people want to see the level of detail till level 9 of JDE & report also on that...What is the solution for this kind of problem??Notes : Levels in JDE are equivalent to generations in Essbase

I hope I'm understanding you correctlyWhy don't you have Account and BU in seperate dimensions? You can train users to look for their account and BU in seperate dimensions orOnly create accounts that have values. In other words don't create every possible account BU combination in essbase. Make sure your load file for Essbase doesn't contain zero value and dimbuild from your data file.

New z77a gd80 build with 3770k -startup loop problem - please help

I just got a new z77a gd 80, 3770k, and haf x case for my new build. I put it all together and when i boot the fans and power go on the motherbard but it quickly shutn the sdown and retarts over and over again. I removed the 3770k and put my 2600k in. The same thing happens. I uninstalled the z77a gd80 from the case and put my z68a gd80 board in with the 3770k chip. samething. i have tested the power supply by using my spare one. this didn't help at all all. i also switch the ram out. That did not work either. Please someone help. I am down my old pc and my new one now :(
Long shot - would leaving the doors open on the case for whatever weird reason cause this? I know that sounds insane but i can't think of anything else.

Quote from: sewn on 15-December-12, 01:04:23
Xmad USB 3.0 pins can make the board not boot?
I think it is the standoff screws because my old z68a board gets stuck in the boot loop. See I install every whole in the haf x case with these screws. I thought that is what i was supposed to do from the picture in the haf x manual. I have now read you are only supposed to put the stand offs in the 9 screw holes not the entire board.
The extra stand off, bent cpu pins, or bent and shorted usb3.0 header pins can all cause a boot failure.

Powerbook G4 12" 867mhz with dvd/cd drive problems - please help!

Hello all,
Just realized this thread should have been in this section. I put it in the using your powerbook section. Sorry for the double post. I just wanted it to be in the right section.
I have just inherited a powerbook g4 from a family member who is upgrading to a new machine. It has dvd/cd drive problems. I'm totally new to OSX and a notebook machine and need some assistance. I've been briefly scanning the forums here and noticed problems with these drives on the model computer. Is there a way to fix this with an install of older software? Here is the problem, if I insert a cd into the super drive it mounts on the desktop, and itunes will play it but it skips and sounds very distorted. I haven't tried a dvd but was told it doesn't even see the dvds on the desktop. Here are the know specs on the machine:
867mhz
640 mb ram
mac os x 10.5.1
boot rom version 4.5.5f4
the burner info: matshita dvd r uj-015
firmware version: docb
Thanks in advance!

Good Morning Mac,
According to your posted specs for the 12" G4PB you have the bare minimum requirements for Leopard. Even Tiger (10.4.11) should have 1GB RAM for decent performance (see my signature specs).
An easily installed 1GB RAM stick can be obtained at either of these reliable vendors:
http://eshop.macsales.com/ or http://www.crucial.com/
However, we are getting ahead of ourselves. Try the following in this order:
Repair Disk Permissions with /Applications/Utilities/Disk Utility/Repair DP, then do the following:
Run Repair HD from original CD or DVD install disk ........
Insert disk and re-start holding down the 'C' key until you see the spinning gear.
At Installer level...... DO NOT CONTINUE
At top left, use 'Utilities' Menu for Tiger or later and go 'Disk Utility'
Select your HD volume with Operating system on...
Select First Aid tab then select Repair Hard Disk button
If "RED" errors are repaired, run again, until none are reported then +run again+ just to be sure you are OK
Do NOT continue with the Installer... QUIT the Installer and return to the Finder ......... Eject the Disc
RESTART ..... Repair Disk Permissions .... AGAIN!
Try the above stuff first .... if that doesn't help, we will get into the "RESETS" steps next!
DIXIE

Refreshing Hierarchy node variable in BEx query with change in hierarchy

Hi all,
We have used a hierarchy node variable on Characteristic ZECCSAC (user-defined) and used it in a BEx query with default value set to a particular node value. Upto this, it is working fine.
The hierarchy used in the query, with the hierarchy node variable, was later changed ( and in future it can undergo changes ). Since the number of records in the hierarchy are changing, the nodenames of the hierarchy nodes are changing. But the hier node variable default value is still set to the earlier nodename for that node description. So at runtime it is giving an error "ECCS Account Number is invalid"!
Can anyone suggest how to refresh a hierarchy node variable default value each time a query is run so that the latest nodename is always taken ?
Quick reply will be appreciated.
Thanks

Hi,
You get this with User exits.
Thnaks

BI Query with Hierarchy in VC does not get correct values

Hello Gurus,
I am building a model in VC for Performance Score card using Query as data service.
I have the following problem.
When I execute query in BEx with Hierachy_node variable , it is getting correct values, but the same is getting incorrect values in VC.
The Hierarcynode variable I am using is a TOP node, then the values including child nodes are also should be displayed, which is working fine with BEx query but not in VC.
When I execute the query with hierarchy node value as child node I am getting correct values both in VC and in BEx.
The correct values are not shown only when I use top nodes.
Please help me in this regard.
Thanks in advance
Ganesh

Hi
We are facing the same issue. Is this issue resolved? Pls let us know the solution
Regards
Aruna

Report on BEx query with 2 structures (one in rows and one in columns)

Hi, experts! I have to make Crystall report on BEx query with 2 structures, one in columns (with KF's), and one in rows. Is it possible to create such report? Because when I create such report, I cant see fields in structures, only characteristics fields.
Ok, I found samr problem in another thread. Sorry.
Edited by: Mikhail Sychev on Dec 5, 2009 9:53 PM

Hey Flora,
Happy to hear that its working now.
Answering your question, again its upto the connection and report format you are using. Based on your question i hope you your report output should be like this.
You cannot map to two labels for the series, again this report format is possible only in cross tab through Webi. I would suggest you to concatenate the material and month in a dimension in webi like below.
I have done the concatenation in excel level, i would suggest you to do that in webi. Try to reduce the formula as much in excel.
or
If you are using Query browser connection, then i would suggest you to create a separate report which will display the actual vs plan material wise, here you need to pass the material as a prompt.
Hope this helps in clear, please revert me for any clarification.

Refresh BEx-Query with variant

Dear all,
i have a question about refreshing Queries with variants.
To refresh a BEx-Query (BW3.5) in a Workbook with VBA is no problem.
For example:
Run "SAPBEX.XLA!SAPBEXrefresh", False, myRange
But is there a possibilty to refresh a BEx-Query with a variant (also with VBA)?
My target is to create a VBA-Tool:
1 which user can select a single Query and the available variant.
2 Then push a VBA-Button
3 After the selection no Variable-Screen will pop-up
and the refreshing is completed.
Thanks all

Hi Ashok,
refreshing Queries automatically on Workbook open is standard...
What i need is to refresh a Query with variant (saved variable-values for a query e.g. the name of the variant is "ZMYVARIABLES").
The user should not select an existing variant (ZMYVARIABLES)
manually with Shift+F5 (Get Variant) on the Query-Variable POPUP-Screen.
What i need is a codefragment which implement that all.
Pseudo code:
Sub RefreshQuery(QueryID As String, Variantname As String)
End Sub
Thanks,
Erol

Hi .. my iPad 4 with iso 7.0.3 he is restarting himself ... How can i solve this problem please help me

Hi .. my iPad 4 with iso 7.0.3 he is restarting himself ... How can i solve this problem please help me

Standard troubleshooting...
1. Try a Restart by pressing the sleep/lock button until you see the slider. Slide to power off. Restart by pressing the sleep/lock button until you see the Apple logo.
2. Try a Reset by pressing the home and sleep buttons until you see the Apple logo. Takes about 5-15 secs of button holding and you won't lose any data or settings.
3. Remove apps from Recently Used list...
- From any Home Screen, double tap the home button to bring up the Recents List
- Swipe up on the app preview card to remove it from the list
- Press the home button when done.
4. If still a problem restore with your backup.
5. If still a problem restore as new, i.e. without your backup. See how it runs with nothing synced to it.
6. If still a problem, it's likely a hardware issue.

Hi, iam facing proble in synchronizing 4 ni 4472 cards input with pxi -6052e analog output. please help me out to sort out this problem

hi, iam facing problem in synchronizing 4 ni 4472 cards input with pxi -6052e analog output. please help me out to sort out this problem

Hi achyuth,
Thank you for posting on the National Instruments forum.
I am not sure what you are trying to do. Are you trying to input and output at the
same time? Are you just trying to
synchronize all of your inputs? Do you
want them to run off the same clock? If
you could, give me some more information so I can understand your problem
better.
In the meantime, this might help you:
PXI Timing,
Triggering, and Synchronization Capabilities of E-Series Multifunction Data
Acquisition ...
PXI Timing and Synchronization
Thank You,
Nick F.
Applications Engineer

BEx query with variant from ABAP

Hello,
I'm looking for possibility to start BEx query with variant (variant is created with tx RSRT) from ABAP. There are some funktion modules, which start queries (launch excel), for example RSAH_LAUNCH_EXCEL or RSSEM_QUERY_LAUNCH, but they are ending with short dump, when there are variables in the query. Is there any standard FM, which starts the query with variant or accepts parameters?
regards,
Krzysztof

Hi,
the short dump was my fault, I've passed query name instead of genuniid to the RSAH_LAUNCH_EXCEL.
What I'm trying to do is to I'll start BEx query with parameters (I don't want to get selection-screen from the query, I need to fill it from ABAP).
Here is my example, which is not working.
DATA:
lv_query(30) TYPE c,
lv_genuniid TYPE rsrrepdir-genuniid,
ls_var       TYPE rrx_var,
lt_var       TYPE TABLE OF rrx_var.
lv_query = 'YB_MAKLER_DETAIL'.
CALL FUNCTION 'CONVERSION_EXIT_GENID_INPUT'
EXPORTING
    input = lv_query
IMPORTING
    output = lv_genuniid.
IF lv_genuniid = ''.
WRITE: / 'There is no Query', lv_query.
ELSE.
ls_var-vnam = 'YS_MKLE'.
ls_var-sign = 'I'.
ls_var-opt = 'EQ'.
ls_var-low = '0000005100'.
APPEND ls_var TO lt_var.
ls_var-vnam = 'YS_VTGJ'.
ls_var-sign = 'I'.
ls_var-opt = 'EQ'.
ls_var-low = '1999'.
APPEND ls_var TO lt_var.
CALL FUNCTION 'RSAH_LAUNCH_EXCEL'
    EXPORTING
      i_genuniid                       = lv_genuniid
      I_OBJVERS                        = 'A'
      i_hide_sapgui                    = 'X'
    TABLES
      I_T_VAR                          = lt_var.
ENDIF.
If parameter 'i_hide_sapgui' is empty, I'm getting empty selection-screen,
If parameter 'i_hide_sapgui' equals 'X' I'm getting selection-screen filled with values, which were used last time manualy, not with values from the internal table 'lt_var'.
Do you have any idea how to pass parameters to the query with this function module?
Regards,
Krzysztof

BEx query with keyfigure rank in row, chars and other keyfigures in columns

Hi All,
    I have a BEx query with Plant and Region in rows and two keyfigures(% and rank calculation) in the column. Now my requirement is to display rank in the first column, plant and % cal. in the next columns in query output.
Query ouput should look like :
rank plant %
1     XYZ    63.00
2    ABC   76.94 and soon.
Is any way possible to achieve this and if yes can anyone explain in detail with steps, I apprecaite your help with points.
Thanks
Eric.

Hi Jerome,
   Thanks for quick response, is there any alternate way like customer exits or etc. This is my requirement and I need to provide the users the solution. I appreciate your valuable time.
Regards
Eric

MDX for a BEx query with a characteristic structure

Hi,
I have a BEx query with a characteristic structure in the rows.
Material     Structure     Measure1
a-Material     a-Structure     ....
a-Material     b-Structure     ....
b-Material     a-Structure     ....
b-Material     b-Structure     ....
I am looking to run the query via MDX. Is that possible? If yes, how should be the mdx statement.
Thank you in advance for your help.
Regards,
McGreen

Hi,
it will work, so long as you also include the Structure object in the WebI Query panel as a results objects.
the SELECT syntax is much the same as a 'normal' MDX statement.
the quickest way to tell them appart is how the Measures are called. normally, it starts:   SELECT [MEASURE.ABC123] NONEMPTY(CROSSJOIN( ...   ) )
however, when you have a Structure, all the declarations from the start of the statement looks like : SELECT [ABC123.ABC123] NONEMPTY(CROSSJOIN( ...   ) )
i hope this helps.
Regards,
H

I have problem when transferring book (PDF/Epub) from Computer to iPad with the new iTune? Please Help....

I have problem when transferring book (PDF/Epub) from Computer to iPad with the new iTune? Please Help....

With iTunes 11 you can enable the left-hand sidebar via control-S on a PC, option-command-S on a Mac. If you are trying to get it to the iBooks app then with the sidebar enabled the process should be similar to how it was on previous versions of iTunes e.g. add it to your iTunes library via File > Add To Library, connect the iPad and select it on the left-hand sidebar, and then use the Books tab on the right-hand side to select and sync it to the iBooks app.

Bex Query with Hierarchy on Workbook problem please help

Similar Messages

Maybe you are looking for