Bex report doesn't display full text information......

Hi Experts,
My bex report is not displaying full text information.
I have set that particular infoobject length as 40 and also have selected long text and Long Description in Bex Tab of the InfoObject.
In my DSO the data is available in complete lenght but in my Bex report it just displays half information
Instead of displaying Service Order Released its displays Service Order Rel
Can anyone help me to resolve this issue please.
Thanks

Hello,
Setting up the BEx Property for Object, is not sufficient enough to display in the query output. You can always overwrite the object level settings in the query designing.
Moreover, when you create a query, system always overwrite your object level settings and apply the query level settings.
Make sure, you have selected Long Text in the query for that characteristic.
- Danny

Similar Messages

Mail doesn't display full email text, only displays the subject line

Mail doesn't display full email text, only displays the subject line.
My preview shows first three lines of email, but when I chose the email specifically mail doesn't display any lines of text. Been this way for about ten days. Please help. Ben

Awesome. Rebooting the phone worked. I had never turned the phone off before (for the next guy - you hold down the "sleep" button for longer than you'd think and that'll do a full shutdown). thank you for your help.

Firefox doesn't display some text on certain pages.

I've noticed that on some pages, Firefox doesn't display certain text. I have the newest version of Firefox installed and my flash and java are updated. The text displays fine on Chrome and IE. Please see my example in the screenshots of the stevenson.edu webpage. Does anybody know what I can do to fix this problem or if there is some sort of plugin I am missing to display certain content? Thanks.
Screenshot of Firefox: http://i47.tinypic.com/123359k.jpg
Screenshot of Chrome: http://i48.tinypic.com/2uy3ay1.jpg

Many site issues can be caused by corrupt cookies or cache. In order to try to fix these problems, the first step is to clear both cookies and the cache.
Note: ''This will temporarily log you out of all sites you're logged in to.''
To clear cache and cookies do the following:
#Go to Firefox > History > Clear recent history or (if no Firefox button is shown) go to Tools > Clear recent history.
#Under "Time range to clear", select "Everything".
#Now, click the arrow next to Details to toggle the Details list active.
#From the details list, check ''Cache'' and ''Cookies'' and uncheck everything else.
#Now click the ''Clear now'' button.
Further information can be found in the [[Clear your cache, history and other personal information in Firefox]] article.
Did this fix your problems? Please report back to us!

Muse mobile site doesn't display full width

The mobile version of my site doesn't display full width. It doesn't scale to fit the mobile screen as the set up width in Muse.
I found a tip talking about add "viewport" code to muse site. When I insert the code to html window, it give me a box said "unable to generate a thumbnail"
If add the view port code is the solution, how do I add this code to the <head> tag on muse?
If not, what's the solution for this situation?

One problem where this occurs is that there could be some object (s) outside the layout page size.

Hi, unable to display full text on selection screen

hi all
please any one tell me how one can display full text on selection screen because whatevery i have defined in text for selection screen variable is not displaying full text, some letters are missing.
for example :
Poste(s) du document de facturation
above text i want to display on selection screen.
but only Poste(s) du document de factur
is displying. some letters are missing
please try to solve this
thanking in advance

Hi Raj,
Check this..
SELECTION-SCREEN COMMENT fmt name.
Additions
1. ... FOR TABLE dbtab
2. ... FOR FIELD f
3. ... MODIF ID mod
4. ... ID id
Effect
Generates a comment on the selection screen. For the name name , there are two options:
name takes the form TEXT-xxx where xxx is a three-character name for a text symbol. In this case, the contents of the text symbol are displayed at runtime, i.e. the text cannot be changed dynamically. name is another eight-character name. Here, you create a field with the name name in the length specified in the format fmt< /> and it is then generated as an output field on the selection screen. The contents of these comments must therefore be set at runtime (e.g. at INITIALIZATION or - in the case of comments in the database include program DBldbSEL - in the routine INIT of the database program SAPDBldb . They can also be changed when the selection screen is being processed.
Note
The field name is generated automatically and so cannot be defined with DATA .
With comments, you must always specify a format fmt (see variant ULINE ).
Note
You must program a new line yourself via the format fmt .
Example
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 10(20) TEXT-001
FOR FIELD PARM.
SELECTION-SCREEN POSITION POS_LOW.
PARAMETERS PARM LIKE SAPLANE-PLANETYPE.
SELECTION-SCREEN END OF LINE.
This code displays a 20-byte long comment followed by the parameter at the normal position ( POS_LOW ) on the same line. If the user presses F1 for both objects, the documentation of SAPLANE-PLANETYPE is displayed.
Regards,
Raj

Popup from ALV for displaying full text = problems!!!

Dear all,
I created an ALV to display data. In this ALV, I have a text column, which just show FIRST 30 characters of the original text.
Now I want to double click on that field, and it will pop up a small window to show full text (the original text, unknown length).
I made lots of references and I decided to use FM POPUP_WITH_TABLE because of some reasons:
a) the original text is retrieved from another FM READ_TEXT. After the call of READ_TEXT, the text will be stored into an internal table. Then, it can be passed to POPUP_WITH_TABLE without more modification.
b) POPUP_WITH_TABLE can show the text more meaningfully. I mean, if the length of the text is greater than the length of the popup window, it automatically break the line and displays the rest in the next line. ( FM POPUP_TO_INFORM does NOT do that.)
However, I've faced some PROBLEMS with FM POPUP_WITH_TABLE
1) The popup window has 2 button OK and Cancel. Is there any way just to display Cancel button?
2) If I click on Cancel or OK without choose any line on the popup window => It will raise an exception, called BREAK_OFF. In this case
If the clicked button is CANCEL => it will close the popup
If the clicked button is OK => nothing happens. And I must click on CANCEL to close the popup.
I want to close the popup windown without raising any exceptions. How can I ?
3) When I enter many complex selection criteria on Selection Screen to limit the result, displaying ALV is good. But when I click on the text field to popup => the report cannot be manipulated. I have to kill the session in SM04.
What's wrong? (because for single selection criteria, it works well.)
Every body has any suggestions?
Thank you in advance

I solved it. I just use another list for pop-up event.
Although it worked well now, I thought it was not a good solution.
Thank you all of you.
Best regards.

Bex report on Multi Provider Long Text issue

Hi All,
I have a report that running on a multiprovider and I have a field that I use as a selection parameter. I changed the settings for this field's info object settings to "long text" to see long description in the pop up search window. However setting change worked for all the other reports that are running on cubes and DSO s but I still see short description when I run the multiprovider report.
Is there any settings need to be changed for multiproviders to see long desc. ?
I apprciate any help with points
Regards

Hi,
Open your query, and select your infoobject and change the display properties-> text view as-> Medium-Length text
Regards
Thenmuga Selvan

Viewer IDs in Activity report doesn't display

Hi,
I would like to check which page that visited pages by user.
As I run activity report that placed in System administration > Monitoring > Portal > Activity Report.
The Last Week's 10 Most Popular iViews/Pages doesn't display Viewer IDs.
Are there any configure for this report, please advise.
Many thank for advise.
Regards,
Kanok-on K.

Hi John,
According from "10 Most Active User" had selected as second type of activity report template.
Only select report type no more additional configure. But I wonder if I select the third activity report type, how to configure for show Viewer IDs
Regards,
Kanok-on K.

The mobile version of my Muse site doesn't display full width

Can anyone help me figure out how to make the mobile version of my site display full width? I've snapped everything to the full width using the blue lines, but the whole site is left justified. I reviewed the master page and everything seems to be in order.

You most likely have an empty box or text box that is off to the right in your design. Do a select all on your Master Pages and pages to see if you have any elements outside the right side of your design.

New releases doesn't display all text

I've noticed a problem wtih the music store and I can't find any similar problem searching through the archives here. Any help in fixing the problem would be appreciated.
In iTunes here when I go to the Music Store the "New Releases" box seems to be too small to display all the information. The second row of songs has the artist name cut off except for the very tops of the letters. The "Exclusives" and "Staff Favorites" boxes also trim off the very bottom of the artist names but those are still readable.
Is there some way to reduce the text size so that I can read the information in the "New Releases" box?
Thanks for any help.

Seems like newer updates to iTunes fixed this problem.

How to display Long text information in my view

Hi
I have a long text of static information , which i need to show in my view. its like agreement information. The user must be able to read it . It has some 20 lines of text. Which is the appropriate control to be used to show the information ?

Hi Naresh
I had some options of displaying the long text in the view.
option 1 - The long text in sap table was in multiple rows in terms of having each line as one record and when displayed looks like a paragraph statement. So I used a webdynpro table to populate the rows and made invisible the row/column lines. So When you run it on the browser it will display like a long text. By default, SAP table will have column some length of 72 characters, which I changed to 140 charcs, to get a long sentence formation.
option 2 - If the long text is not from SAP table and its kind of direct information, then just keep on pasting the text in the text view by providing spaces appropriately, so that the display will be a continous form of paragraph. This is a trial and error way and providing the spaces between the lines.
option 3 - Store the long text in a text file and call a import parameter, which will read the whole text and store it in string (node) and display it text view. ( alignment cannot be gauranteed)
option 4 - Last one, is to call a office (msword) or a pdf control , which will display the long text through the word editor or a pdf form.
If you have any specific issues do write back to the forum.
thanks
sathya

Verizon Messages App doesn't display incoming texts

The VERIZON MESSAGES APP doesn't display all incoming messages.
This is true for the WEB APP i use on my windows 7 PC
Iv'e tried multiple browsers and this does not help
It is also a problem with both my android tablets running the google play app from verizon
I'm not sure but, it appears that maybe this is related to ATT users.

This does NOT work on the Galaxy S3.
Airplane mode ON, Wifi ON, No network mode is available in Airplane mode. So...only wifi is available. When I try to send a text with only wifi available I get "Network not available. The message will be sent when the network is available"
BUT...On my Galaxy Tab 2 (non-verizon), This DOES work. On the tab 2 with only wifi available, I CAN send text messages using Verizon Messages.
So....again...
On Galaxy Tab 2 with only WiFi available...texting with Verizon messages DOES work.
On Galaxy S3 with only WiFi available...texting with Verizon messages DOES NOT work.
Please fix Verizon Messages to work over WiFi using Galaxy S3.
Thanks,
Abe

Webi SelectionScreen based on BEx variable doesn't display dates correctly

Hi,
BEx query has a date variable. When this BEx query is executed in BW, the date variable shows a calendar in F4 selection screen.
Webi is built based on this BEx query which is using the BEx date variable. When Webi is executed, in the selection screen, list of dates are displayed instead of a Calendar. Also, the list doesn't not contain all the dates.
Please suggest how to get the calendar in the Webi Selecton Screen for Date field or atleast suggest how to get list of all dates in the webi selection screen.
Thanks,
Sai.

Hi,
Use this
<FILTER KEY="ZV_DATE"><CONDITION OPERATORCONDITION="Equal"><CONSTANT TECH_NAME="@Prompt('Date (Previous Day)','D',,mono,free )"/></CONDITION></FILTER>
- Changed 'A' to 'D' to set from Alphanumeric to Date (might give prompt in date format and calendar option)
- Removed the reference to the LOV (which i think would remove the reference to getting values from BW)
- Changed primary_key to free (which i think would allow the user to enter values themselves)

Finder doesn't display full content

Hello!
We have an urgent problem here. The Finder seems to update the windows far too slow. When you create a document from an application, the finder shows it after a long time (about an hour or more). When you use Terminal oder even an open dialog it shows the documents. You can open the documents via an open dialog but the Finder doesn't show them.
Copying files via Finder shows them in the finder.
After a reboot the Finder shows all files until you save a document somewhere.
I did not find any error messages in the log files yet.
Hope you can help.
Thorsten
2 GHz G5 DC Mac OS X (10.4.4)

You may be able to repair this with the 10.4.4 Stand Alone Combo Update.
This is a full install, as opposed to an incremental "delta" update so it should overwrite any files that are damaged or missing. It does not matter if you have applied it before. It has worked well for many.
Repair permissions before update:
Navigate to Applications/Utilities/Disk Utility (Double Click to Launch) > Choose your HD in the sidebar > First Aid Tab > Click on "Repair Disk Permissions".
Also Verify Disk before update:
Steps for using Disk Utility
1. Insert your Mac OS Tiger DVD disc, then restart the computer while holding the C key until you see the spinning gear..
2. Once started up from CD or DVD, choose Disk Utility from the Installer menu.
Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from disc to access Disk Utility.
3. Click the First Aid tab.
4. Click the disclosure triangle to the left of the hard drive icon to display the names of your hard disk volumes and partitions.
5. Select your Mac OS X volume, if necessary.
6. Click Repair.
Good luck, let us know.
-mj
[email protected]

Itunes 12 doesn't display tv episode information?

I mean I guess I'm ok with the new design of iTunes but seriously...is there no way to display the information from the tv episode I have selected in my library? Any way to change it so it doesn't show EVERY SINGLE EPISODE in a list (for tv shows like the simpsons that have over 20 season this is a little ridiculous...).
TV shows in my library, not in the iTunes store. Any way to see any information on the episode other than title and length...?

See TV Episode Description Missing in iTunes 12
... where the same question is asked and answered.
UPDATE ... Well, almost the same question. The answer I show is in the Store, not the individual collection.
Of course, music and iBooks don't show as much information in the user's collection as it does in the Store either.

Bex report doesn't display full text information......

Similar Messages

Maybe you are looking for