Bex Reports.
Hello All,
I have problem while executing the Bex.report,
"PO Date after Invoice Date",
i am unable to execute the file in the Web Portal,
i am getting the pop-up saying
<b>"do u want to save this file"</b>
and only <b>save</b> option and <b>Cancel</b> Options
are there....
Bex reports can only be saved.......?cannot be executed
in the portal........?
plz clarify me.......
or what settings have to be done for executing this.
Thanx
Arshad
Hello Shravan,
Please go to Best Practice link
http://help.sap.com/bp_biv235/BI_EN/index.htm
Here you will find demos for some pre-configuered scenarios including queries.
Regards,
Praveen
Similar Messages
-
Concatenation of Data from 4 infoobjects into a single cell in Bex Report
Hi,
I have loaded ODS with the description data. The source system for loading the ODS is the flat file. The ODS data should be a replica of the flat file.
In the flat file, there is a description field corresponding to a particular ID. This Description is greater than the standard 60 char length. So, I had to split the description while loading the flat file using single line routine in the Transfer Structure.
So, while loading different the data, I split the description field data from the flat file into 4 infoobjects and the flat file data was loaded into the ODS.
Now, from the reporting point of view, I need to display the entire description data from the 4 info-objects into a single cell in the Bex report.
Please suggest a solution for this.
<b>****Points will be awarded***</b>Hi Vineet,
Thanks for the response.
Could you please help me out with the VBA script(code) that needs to be written in the macro.
Thanks in Advance.
<i><b>****Points will be awarded****</b></i>
Regards,
Hitesh Shetty. -
RFC connection Error While run BEx Report
Hi All
I got BI 7.0 and create new user with roles only access: TR: RRMX to see only BEx Reporting... I create basically new customize role and put only one transcation code RRMX and assigned to user...
When goto BEx designer I got that error
rfc error received user has no rfc authorization for function group syst.
I am not sure what kind of authrouzation user need to only view BEx Reporting...
But when I put SAP_ALL in that profile same user, thats works fine, but I don't want to give SAP_ALL to user...
2nd question same look like BEx Analyzer the side bar when I click open nothing happend and it writedown like German language..
Please advisedHi Alls
I am Angeline again, I resolved that problem and want to shair with you guys....
1. Tr: PFCG and click on Maintain roles
2. Role Name: Z_RUN_QUERIES
3. Click on Authorization Tab Saved Entry
4. In Edit mode Select the template: S_RS_RREPU and adopt reference (Business Content)
5. Expand u2018Business Explorer u2013 Componentsu2019
6. Selected: u201CType of a reporting component Calculated key figure, query restricted
7. key figure u2013 template structure and click on Edit
8. Un-Check REP Query
9. Generate the Profile
10. Create Transport number
11. click on user TAB and define user name in it
12. click User compare and complete compare and saved the entry
13. TR: SU01 in User click on Roles and define Z_RUN_QUERIES and profile
Thanks -
Header and Footer in a BEx report
Hi Everyone,
I have a requirement where I need to provide a space for the user to sign-off with their name and signature at the bottom of the print-out of a BEx report. For this purpose I need to provide a space at the bottom of the report where the user can write their names and sign-off. It should be something like:
Name: _________________________________-
Signature: _______________________________
Date: ___________________________________
Is there some way I can add all this as the footer text in the BEx query?
Thanks,
RamIf the BEx query can use a "structure" in the rows section....
Under last row, add a selection = company code, set it not equal to the company code, & change the description =
NAME: ____________________________________________
Then, copy the above row, but change description to =
SIGNATURE: _____________________________________
Repeat, copy the above row, change description =
DATE: ____________________________________
If you want to add blank lines, copy one of these rows, but change description = a period = .
By setting the restriction <> to the real company code, then that row should be blank straight across, except for the description.
A better/more professional looking option is to put the BEx query into a web template, add 3 HTML rows under the query result table, add text per your specs. Then save web template to the appropriate role/folder to publish it on the portal.
Edited by: Sharon West on Dec 11, 2008 10:17 AM -
Header and Footer in BEX reporting
Hai friends,
could you plz tell me how to add Header and Footer in Bex report.. that means.. i want some my company name and address should print on the top of the report..
and also.. in the Footer. i want to display the Number of records are selected...
Ex :
XYZ ORGANIZATION
#301, ITPL,
BANGALORE.
4 Records are selected
so, plz give me the solution .... how to design a query with this requirement
thanks
with regards
@jayHi Ajay,
Refer to web tempaltes 0adhoc_header and 0adhoc_Footer , by changing this you should be able to display header and footer for each query out of BW server.
Hope that helps.
Regards
Kapadia
***Assigning points is the way to say thanks in SDN.*** -
Shortened Fiscal Year and its impact on BI back end and Bex reports
Hi All,
Our client is making some changes to the fiscal year period.
Becuase of some business requirements, we will have to shortened the fiscal year.
Can you please suggest - what are the watch points when we do this?
- what will be the impact to BI back end and Bex reports?
Thanks,
NishaHello Nisha,
Since the fiscal year (Infobjects - 0FISCYEAR and/ 0FISCPER3) is compounded with fiscal year variant, therefore maintaining the correct variant in BI will automatically take care of showing the data correctly.
So there are two things to be maintained in BI:
1) To see that the variant definition.
2) If you need to display the text of the fiscal periods, then the correct texts.
Let me know if you need more clarifications.
Regards,
Shweta
Edited by: Shweta Kesarwani on Jan 8, 2010 11:10 AM -
Short Dump when the Bex-Report scheduled for Broadcast
Hi Guru's
I am getting the short dump when I am scheduling the Bex-Report for Broadcasting. Need your help to reslove this issue.
Thanks
Navin
Note
The following error text was processed in the system BDV : The current application triggered a termination with a short dump.
The error occurred on the application server spdbwd01_BDV_05 and in the work process 0 .
The termination type was: RABAX_STATE
The ABAP call stack was:
Form: INTERNAL_ERROR of program SAPLSDCL
Form: PHIO_GET_CONTENT_ACCESS of program SAPLSDCI
Function: SDOK_PHIO_GET_CONTENT_ACCESS of program SAPLSDCI
Function: SKWF_PHIO_CONTENT_ACCESS_GET of program SAPLSKWF_CONTENT
Method: COPY_MIME_TO_FOLDER of program CL_RSRA_KWF_UTILITIES=========CP
Method: GET_STYLESHEET of program CL_RSRA_KWF_TMPL==============CP
Method: CONSTRUCTOR of program CL_RSRA_KWF_TMPL==============CP
Method: SET_TEMPLATE_FOLDER of program CL_RSRA_ENGINE_BC=============CP
Method: CONSTRUCTOR of program CL_RSRA_ENGINE_BC=============CP
Method: EXECUTE_SINGLE of program CL_RSRA_JOB===================CPHI Navin,
Check the short dump analysis in T-code ST22.
and also check the Information Broadcast Settings / Configuration
Check the error for Emails in t-code SCOT. BASIS Consultants will help you on this issue.
Regards
Daya Sagar -
I have few questions regarding creating Chart in BW Report. One thing I need to make it clear it's a simple BeX Report not a WAD report.
(1) How should I create a chart in the Report?? Should I have to create it in the Excel Sheet once I run the report?
(2) Do I need to create the chart everytime manually once I run the report or is there any way we can save it and everytime we open the Report it should display the chart automatically !!
(3) When users drill up/ drill down or group data in different views, the Chart should be dynamically changed follow the change in data set. Is it possible to do that??
Thanks,hi,
you can add a chart to your report. it is possible.check out these links for details..
http://help.sap.com/saphelp_nw04s/helpdata/en/43/68ce8391886e47e10000000a422035/frameset.htm
http://help.sap.com/saphelp_erp2004/helpdata/en/38/0f3f28be7c5d47802f951c65d7a6f7/content.htm
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/a6789190-0201-0010-03be-bb1c5a65a615
hope it helps -
BEx Report Performance with selection-screen input
Hello Gurus,
My Bex report is working fine when the report had run with out PLANT filter in the selection-screen but when report had run with plant in the selection-screen , report running for forever.
Please let me know what I need to do improve the performance.
Saleem.Hi Saleem, Just a few thoughts;
1. Check the M-table in RSD1 for 0PLANT. In Table View edit any blank or null values. Run the same restrictions you apply in the query at Info provider level > Display Data. If there's any lapse; you can judge where exactly the problem lies.
2. If you are using Infocube & that your master is >20% fact; you can declare the Info object as 'Line Item Dimension'.
3. Create Variants. Esp. if you are running the query for same set of data. Try Variable Preselection: You can restrict both the values + varaiables in the filter level. When you execute the values will be visibly pre-selected in selection screen.
4. As discussed in previous messages, running a SQL trace using RSRT may prove useful. -
Dear Friends,
I would like to know is the complex authorizations can also cause the Bex report performance.
One of my scenerio is like there are two users A & B
A is having relevant authorizations for reporting, Drill down etc which are required.
B is having SAP All authorization.
When the same report has been executed by both users on the same system.
the data retrieved by user B(SAP_ALL authorization) is quite faster than User A.
Its like ther diffference of about 10 minutes.
There are some exsclude selections in report.
So my conclusion is like the complex authorizations do also hampers the query performance.
Please confirm & share your views.
Thanks & Best Regards,
Vivek Tripathi
+91-9372313000Hi Vivek
Can you help us understand what was the exact problem and how you resolved it / solution at Extraction / Modeling / Reporting end.
I have a quite similiar issue with my report i have Header + Item report on Infoset
u2022 Header report takes seconds and item report takes minutes
u2022 The same report executed with exact parameter has inconsistent performance results meaning one time it takes 1 minutes next time same report same user and same authorization takes 5 minutes.
Any help on this would be really greatfull. Suspecting is not an issue with the report at all , as no changes happened between the pre and post check.
_Additional Information : _
We Create Secondary -Bitmap index every week end i do not see that is one of the route cause.
Except that we have our regular daily loads that are running for master data loads and transaction data loads in series.
Thanks in Advance.
Much Regards
Jagadish Thirumalachetty.
Edited by: Jagadish Thirumalachetty on Jul 14, 2010 1:35 PM -
Strange performance issue in bex report
Hello Experts,
I have a performance issue on my bex report.
I'm running the report with below selection criteria and getting 'too much data' error.
Country : equals EMEA
Category: not equlas 13
Date : 02/2010 to 12/2010.
But when I ran the report for smaller date ranges the number of records are not exceeding 13000.
02.2010 - 06.2010 - 6,555 rows
07.2010 - 09.2010 - 3,671 rows
10.2010 - 12.2010 - 2,780 rows
I know excel can't fit more than 65000 records, but I'm expecting 13000 records for my wide date range which excel can easily fit.
Any ideas on this one will be appreciated.
Regards,
Brahma ReddyHi,
For Question 1:
In query designer Go to the Query properties and select the tab "Variable Sequence", here you can set the order of variables as per you requirement.
For Question 2:
There will be a option "Hide Repeated Key values", if you uncheck this option then you will have the values for each row even though the material values are same.
Note; if you are viewing the report in web or WAD report you need to make the same changes in the Web template also because the settings in the query designer will be overridden when you run the query in web.
Hope this helps.
Regards,
Rk. -
Need to add extra field in BEX report
Hi Experts ,
I have a problem in bex report.
scenario is like this--
APD will generate the BPS Daily report on Branch, Group, Area, Region and total company levels and then exports into a flat files stored in appserver
and i got the requirement to change the layout of the report. The client wants to need the one field extra ie. 'REPORTS RUN DATE '
and i am stuck here how to add this field in my report ..
Please help me ASAP.
Thanks a lot in advance
Saurabhhi,
Enhance your APD and in the target add field REPORTS RUN DATE .
Fill this using ABAP routine which populates the sy-datum in this field.
regards,
Arvind. -
Is it possible to Display BW Bex report iviews in Tabbed Interface?
Hi,
Is their a way to display BW BEx Report Iviews in Tabbed Interface?
My requirement is to show four BEx Reports using 4 tabs on a page. Can we achieve this functionality in portal? If yes can some one guide me how to proceed?
Regards
Sai Krishna Reddywhy not have a webtemplate with tabbed interace and use that webtemplate to create BWP iview?
check out the following how to document on this subjec.
<a href="https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/5074a890-0201-0010-a489-dd05902a28c8">How to Create Buttons and TabStrips in BI Web Applications</a>
Regards
Raja -
How to remove the '#'symbols for infoobject movement types in bex reporting
Hi All,
I have a problem in Bex reporting. The problem is when ever executing the report that time some of the characteristic values is shown in layout '#' Symbols. i want to remove the '#' valuse in report.
is it possible please give me step by step procedure for how to remove the '#' Symbols in reporing layout.
this is very urgent please help to me on this issue.
Thanks & Regards,
Guna.Hi Guna,
To achieve this issue, we need to replace the value of #, we need to change the description while retrieving the data from tables. So we need to write some ABAP code in SE38. Go to RSA1 transaction and go to Info objects tab. Then go to context menu for cProject Key Figures as shown below. Click on the Object Overview to get the overview of all the info objects. Here you can see the field names which are used to know the table names.
In SE11, type the table name in Database Table field. Now press F4, then you will get the next screen to select one of the P/Q/S/T tables.
Now click on the button rounded in the below screen to view the data in the table.
Now click the execute button or press F8 to view the records.
Now go to Tcode: SE38. Create a source code and give some program name for that source code. To write code, you need access key. Contact your BASIS for this.
Now write the below code for that particular table in which you want to change the value # to description Blank. In the below source code, we are updating particular table, setting the field as Blank where it is null or no value. Here the field will automatically get updated to # if there is no value or null.
update /BIC/PXXXXX set /BIC/ZXXXX = 'Blank' where /BIC/ZXXXXX is null or /BIC/ZXXXX = ''.
if sy-subrc eq 0.
write 'successful'.
commit work.
else.
write 'unsuccessful'.
endif.
OR
If this # is because of the missing master data than,
right click that IO -> maintain master
you will see first row as a blank.
whatever value you maintain in this row that will come in the report for all Not assigned # values of the master data in the report.
maintain it according to your requirement, save and activate the master data
Hope this helps u...
Regards,
KK. -
Hi All,
I have a requirement where the client wants to dsiplay the image of a particular characteristics in the Bex report.
For example, they have a charaacteristic Material, and they have the images of all the materials. The requirement is to display the image of the particular material wherever it appears in any report.
Can somebody let me know if this is possible and if yes how this can be done? I want to know how the master data (with the images) will be maintained and how it can be implemented on the reporting side.
Thanks in advance for any help.
Arnab Ghoshrefer:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/709cfb6e-f99c-2910-ba82-e85202944022
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/8046aa90-0201-0010-5e99-962948c83331 -
GR and IR as separate columns in the BEx report
Hi,
I am working on a Purchasing report in which the user needs the snap shot of PO history,Like PO no.,Item,Netprice,PO Qty,Net order value,GR no.,IR number etc.
I created a view on EKPO and EKBE.Here,based on the BELNR(Material document) field we are taking GR and IR values.(When VGABE =1 BELNR=GR and VGABE = 2 BELNR=IR).I created DSO to load the data.The problem is they need the GR and IR as separate columns in the BEx report.Could u please help me how to achieve this in BI?
Thanks & Regards,
Dinakar.Hi Neel,
I need the BELNR has to be split into GR No.and IR No. separately based on VGABE field.
Thanks & Regards,
Dinakar.
Maybe you are looking for
-
Some of my apps on both my iPad and iPod Touch no longer have sound. Others still do. I checked general settings. Any other ideas of how to fix this?
-
Costco and soft proofing show dull washed out image
OK, so I am trying to utilize my nearest costco to print some images from lightroom 5. I am getting back dull washed out prints. Facts: I shoot in RAW in manual mode I am using sRGB when I do my post processing I export to jpg for printing I used the
-
Hi all, in my classic report i break the report for the Column1 and i need to change the labels of the headers depend of value of Column 1 in the current row in the query. I saw that i can insert PL/SQL code to set the report labels, but how can i ch
-
Widget Request: Dictionary / Thesaurus
Widget Request: Dictionary / Thesaurus I would love to see Dictionary / Thesaurus from OS X come to the iPhone. I know that Apple will more then likely bring more widgets to the iPhone, but I for one would like to see this as one of the first.
-
MultiClip Problems with Pluraleyes in FCP 7
I have 4 cameras all shot with a DSLR Camera. Each camera is about 1 hour and 15 minutes long and has both video and audio on it.. Of course, each camera has multiple cuts in them when the videographer pressed stop and go while he was shooting. There