BEx SAP-Exit Variables

Where do I find documentation on BEx SAP-Exit Variables. What the Exit does and so on?

Try this link.
http://help.sap.com/saphelp_nw70/helpdata/en/36/df22419e2ab167e10000000a155106/frameset.htm
The variables are documented as per BI Content.
-Saket

Similar Messages

  • Subject: Where are SAP Exit Variables and how to use them in Bex Query

    I have seen references to variables:  0cyear (Current Year), 0CALYEAR (current year), oCALMONTH (Current month/year).
    Under 0CALMONTH characteristic or 0CALYEAR I do not see any of the variables, so how does
    one use these variable in the query. For example I want to create a restricted key figure:  Duration restricted by Current calendar year (e.g.  2009 if I am in 2009, 2010 if I am in 2010..).

    Thanks a lot. Actally, I was looking in my production system and under varaiables I did not find any SAP Exit variables,
    but in development envrionment I do see some.
    Why will it not show me these variables in production? Is it because:
    1. Some special premssion is required to view this type of variable
    or
    2. THese varaiables were not installed from Business Content
    It is hard for me to beleive, it is permission issue.

  • Default value of BeX customer Exit variable not Displayed in WeBI??

    Hello Experts,
    We are stuck with a problem where WeBI report is created on top of BeX query and we are not able to see the default value of Bex Customer exit variable in WeBI run. Here is the complete scenario:
    1. One restricted KF is created in BeX, restricted with Customer exit variable on net Due date. And this variable is mandatory, ready for input, and Default value in calculated is user exit as current Week's Monday.
    2. So, by default KF data should be restricted to Monday of current week, if user does not change this value.
    3. Now, WeBI report is created on top of this Bex query, and all is working fine, i.e. we are getting variable as Prompt in WeBI, but Default value is not shown while Running the Webi Report.
    So, need your inputs on the same, if default values from BeX in WeBI is supported or not? If yes, why this is happening, and how to resolve it?
    Please notice, the restrcition is in KF only, it is not a separate restrcition on Net Due date in Filter area or in Defualt area of BeX
    and we are on SAP BW 7.1 and BOXI 3.1 SP4.
    Regards,
    Vipul
    Edited by: VIPUL GOYAL on Nov 23, 2011 9:44 PM

    Hi,
    See 1285993 - Support of Customer Exit Variables from BEx query into WebIntelligence via OLAP universe
    WebI will prompt when executed, but the default values calculated by the user exit  - do not appear.
    Note: If the BEx variable has property 'ready for input' set / enabled, then its WebI prompt shows ok, but no default value appears.
    Cause
    This behaviour expected 'by design' (in the context of the product's current limitations) as explained in the online guide below:
    Please refer to Chapter 7, page 44, document link here: http://help.sap.com/businessobject/product_guides/boexir3/en/xi3_sap_olap_universes_en.pdf
    Characteristic variable > processing type > Customer Exit  is "Supported, without user entry"                                                                               
    -->  This should be understood as meaning "User will not be shown a prompt"
    regards,
    H

  • How to create/use SAP Exit variable of Query designer

    Hello experts,
    Can you please guide me on how to create/use SAP Exit variables ?
    Is there any way we can transport customer exit include in which we write all codes related to customer exit variables?
    Kindly provide your valuable inputs on this.
    Thanks,
    Mitesh

    Hello Gautam,
    I think you should first implement the user-exit via the transaction SMOD/CMOD and the SAP-Enhancement RSR00001 User-Exit ( BW Reporting )
    For the concrete implementation I would suggest to encapsulate the variables, as it is described here
    Easy implementation of BEx-Userexit-Variables
    and here: BEx-Userexits reloaded
    Kind regards,
    Hendrik

  • Current Workday SAP EXIT variable not aligned with correct work days

    Hello,
    I am trying to use the Current Workday variable within a report so that the data will only be refreshed when the calendar day is Monday - Friday. Users look at this report every day, but when they get the report on Monday we would like for the date to be restricted to the previous Friday, and then switch back to Monday's date when they view the report on Tuesday. In order to do this we have placed the Current Workday variable from the Calendar Date characteristic with an offset of negative 1, but it is showing Sunday's date when they look at the report on Monday.
    My questions are:
    -Does this variable use the factory calendar that can define the work days?
    -If so, which Factory calendar does it use? I have gone to the Tcode SCAL but I can see there are many different factory calendars and I have no idea which calendar this variable pertains to. I have also transferred the global settings for the factory calendar from the source system, and I see no change within the variable.
    -How can I see the program name behind this SAP Exit variable? My thinking is that I could at least look at the code to see if perhaps I can find out the factory calendar ID the variable refers to from there.
    Any help on this would be greatly appreciated! Until this is fixed I have to manually adjust this report every Monday and Tuesday morning!! Not ideal.

    Hi Kelly,
    I am not sure whether this can be done by an SAP Exit variable.
    But you may try this using a Customer exit variable by using the Function module DATE_COMPUTE_DAY.
    The function module "DATE_COMPUTE_DAY" will return the day by 1 to 7 when you input date.
    Monday : System will return value = 1
    Tuesday : System will return value = 2
    Wednesday : System will return value = 3
    Thursday : System will return value = 4
    Friday : System will return value = 5
    Saturday : System will return value = 6
    Sunday : System will return value = 7
    So input sy-datum to this FM and find the number of day. If it is Monday, the number will be 1.
    If output is 1, then offset date by -3 to that of Friday, else offset by -1 to previous day.
    Hope this helps,
    Regards,
    Hari

  • How to find out the customer exit and sap exit variables created provider?

    Hi all,
    How to identify what are all the customer exit and sap exit variables are been created for an info provider. is there any tables which allow us to find out.
    thanxs
    haritha

    Hello haritha,
           SAP Exit and Customer Exit variables are created for  Characteristics and not for individual InfoProviders.
    So whenever the characteristic is used in the InfoProvider, by selection the appropriate variable the exit can be called.
    So the same Exit can be in one or more InfoProviders.
    Hope it helps.
    Thanks,
    Chandran

  • Variable required for 0DOC_DATE, same as the SAP exit variable 0P_KEYDT

    Hi Gurus,
    I am currently trying to create a query based upon the InfoProvider -  FIAP: Line Item (0FIAP_C03).
    For the Characteristic Net Due Date (0NETDUEDATE) there is a SAP exit variable called Key Due Date (0P_KEYDT).
    I need to replicate this variable for 0DOC_DATE, which is what I need to use in this query.
    I do not have any knowledge of ABAP therefore could you please advise;
    1) Whether this variable can be replicated for 0DOC_DATE so that it defaults to system date - 1 day
    2) What steps I need to take to create this variable
    3) What is the exact ABAP code that I will need to do this.
    If there is a variable that already exists for 0DOC_DATE that acts in the same way as 0P_KEYDT then please let me know.
    Thanks
    Nate

    Hello,
    1&3) goto CMOD - create e.g. ZBWVARS. Add RSR00001enhancement. Modify ZXRSRU01 include.
    You need developer key to do that.
    CASE i_vnam.
    WHEN 'ZDOC_DATE,'.
        IF i_step EQ '2'.
          CLEAR l_s_range.
          l_s_range-sign = 'I'.
          l_s_range-opt = 'EQ'.
          l_s_range-low = sy-datum - 1.
          APPEND l_s_range TO e_t_range.
        ENDIF.
    ENDCASE.
    2) In Query Designer create customer-exit variable ZDOC_DATE.
    BR
    Ondrej

  • U201CDisplay not allowedu201D for SAP Exit variables

    Hi All
    I collected some SAP Exit variables under a transport request and moved them to the BI DEV system from sand box systemu2026u2026u2026 when we are trying to use these objects in BIDEV in the query designer the variables are displaying as u201CDISPLAY NOT ALLOWEDu201D for all queries where ever these variables are used and we are not able to use them for drag and drop in the query designer
    I searched forum and find one similar thread but no answer
    Please help on this
    Thanks in advance

    Same here. Do you know how you resolved this issue?

  • SAP Exit Variables changes using FM RREX_VARIABLE_EXIT

    Hi BW Group:
                I am trying to made some modifications on Dates fields and for that I created variables as SAP Exit.
    In the code of the standard FM RREX_VARIABLE_EXIT appear a part to include the code for the new variables as RSVAREXIT_XXX_YYY.
    Does any one in the group use a SAP Exit variable before? Do you need to code in this FM?
    Thanks in advance.
                      Norge

    Hi,
      Please chk this URL , hope it may help u .
    http://help.sap.com/saphelp_bw21c/helpdata/en/f1/0a56a7e09411d2acb90000e829fbfe/content.htm

  • BEX User exit variables in WEBI

    Hi Experts,
    Need your help please.
    I have a report in BEX with a user exit variable wich depends on other manual input variable.
    In BEX it works properly but in WEBI it doesn't recognize the user exit variable.
    It displays the error message: Not possible to determine the value for ZPD_YEAR_DAY variable
    Error in DB.​ ​Error message is​:​ ​failure to execute the query ​M​D​X​ ​S​E​L​E​C​T​ ​ ​{​ ​[​M​e​a​s​u​r​e​s​]​.​[​D​9​C​S​1​W​7​F​A​8​F​E​O​H​J​3​T​3​2​H​4​Q​D​Z​4​]​,​ ​[​M​e​a​s​u​r​e​s​]​.​[​D​9​D​H​9​K​1​N​I​T​C​Z​E​4​U​Y​3​J​4​U​A​E​T​Z​4​]​,​ ​[​M​e​a​s​u​r​e​s​]​.​[​D​9​D​H​9​K​1​N​I​T​D​R​2​R​6​P​F​2​K​G​C​U​8​8​W​]​,​ ​[​M​e​a​s​u​r​e​s​]​.​[​D​9​C​S​1​W​7​F​A​8​E​M​Z​V​7​C​H​J​M​V​2​A​Z​P​C​]​,​ ​[​M​e​a​s​u​r​e​s​]​.​[​D​9​C​S​1​W​7​F​A​8​K​0​S​7​H​N​Q​B​O​5​J​A​R​L​S​]​,​ ​[​M​e​a​s​u​r​e​s​]​.​[​D​9​C​S​1​W​7​F​A​8​G​6​D​3​U​V​4​M​I​3​7​5​S​8​W​]​,​ ​[​M​e​a​s​u​r​e​s​]​.​[​D​9​C​S​1​W​7​F​A​8​H​P​Q​C​I​D​R​P​D​B​C​0​K​S​G​]​,​ ​[​M​e​a​s​u​r​e​s​]​.​[​D​9​C​S​1​W​7​F​A​8​I​H​E​Y​U​5​3​8​S​X​E​F​Z​2​8​]​,​ ​[​M​e​a​s​u​r​e​s​]​.​[​D​9​D​H​2​8​D​W​V​F​6​7​4​2​E​6​4​Z​O​L​8​F​X​3​4​]​ ​}​ ​ ​O​N​ ​C​O​L​U​M​N​S​ ​,​ ​N​O​N​ ​E​M​P​T​Y​ ​C​R​O​S​S​J​O​I​N​(​ ​C​R​O​S​S​J​O​I​N​(​ ​C​R​O​S​S​J​O​I​N​(​ ​C​R​O​S​S​J​O​I​N​(​ ​C​R​O​S​S​J​O​I​N​(​ ​C​R​O​S​S​J​O​I​N​(​ ​C​R​O​S​S​J​O​I​N​(​ ​C​R​O​S​S​J​O​I​N​(​ ​C​R​O​S​S​J​O​I​N​(​ ​ ​{​ ​[​0​C​A​L​Y​E​A​R​]​.​[​2​0​1​0​]​ ​}​ ​,​ ​ ​{​ ​[​0​H​A​P​_​D​O​C​_​I​D​_​_​Z​A​P​_​S​U​B​S​T​]​.​[​5​0​]​,​ ​[​0​H​A​P​_​D​O​C​_​I​D​_​_​Z​A​P​_​S​U​B​S​T​]​.​[​7​0​]​ ​}​ ​ ​)​,​ ​[​0​I​N​F​O​P​R​O​V​]​.​[​L​E​V​E​L​0​1​]​.​M​E​M​B​E​R​S​ ​)​,​ ​[​Z​D​A​T​E​_​A​T​]​.​[​L​E​V​E​L​0​1​]​.​M​E​M​B​E​R​S​ ​)​,​ ​ ​{​ ​[​Z​C​P​M​]​.​[​X​]​ ​}​ ​ ​)​,​ ​[​Z​P​R​O​M​O​C​A​O​]​.​[​L​E​V​E​L​0​1​]​.​M​E​M​B​E​R​S​ ​)​,​ ​[​Z​R​E​S​P​_​A​V​L​_​_​Z​N​I​V​_​C​A​R​R​]​.​[​L​E​V​E​L​0​1​]​.​M​E​M​B​E​R​S​ ​)​,​ ​[​Z​R​E​S​P​_​A​V​L​]​.​[​L​E​V​E​L​0​1​]​.​M​E​M​B​E​R​S​ ​)​,​ ​[​Z​N​I​V​_​C​A​R​R​]​.​[​L​E​V​E​L​0​1​]​.​M​E​M​B​E​R​S​ ​)​,​ ​[​0​E​M​P​L​O​Y​E​E​]​.​[​L​E​V​E​L​0​1​]​.​M​E​M​B​E​R​S​ ​)​ ​D​I​M​E​N​S​I​O​N​ ​P​R​O​P​E​R​T​I​E​S​ ​M​E​M​B​E​R​_​N​A​M​E​,​ ​M​E​M​B​E​R​_​C​A​P​T​I​O​N​,​ ​[​0​E​M​P​L​O​Y​E​E​]​.​[​2​0​E​M​P​L​O​Y​E​E​]​,​ ​[​0​E​M​P​L​O​Y​E​E​]​.​[​4​0​E​M​P​L​O​Y​E​E​]​,​ ​[​0​H​A​P​_​D​O​C​_​I​D​_​_​Z​A​P​_​S​U​B​S​T​]​.​[​2​0​H​A​P​_​D​O​C​_​I​D​_​_​Z​A​P​_​S​U​B​S​T​]​,​ ​[​Z​R​E​S​P​_​A​V​L​]​.​[​2​Z​R​E​S​P​_​A​V​L​]​ ​O​N​ ​R​O​W​S​ ​F​R​O​M​ ​[​Z​A​V​D​P​_​M​0​1​/​Z​P​D​_​G​P​S​_​V​A​R​I​A​V​E​L​_​0​0​2​]​ ​ ​with error:​ Not possible to determine the value for ZPD_YEAR_DAY variable​.​ ​(​W​I​S​ ​1​0​9​0​1​)
    This ZPD_YEAR_DAY variable​ is the user exit variable.
    Thanks in advance,
    José Simões

    Hi!
    I am following up to this post to see if there is something I am missing.
    We have bex query with user exit variable and webi bi4sp04.4
    In bex the user exit variable works correctly, in webi, it is ignored  (the webi results are not filtered as they are in bex web results)
    I have tried moving the variable to the char restrictions and removed ready for input - so there are now no prompts in bex query.
    I have reviewed note 1611185 as well as other info on restrictions of BICS and webi, but cannot find a clear answer if bex user exit variables are supported in BI4 clients or not.
    Lee Lewis

  • Abap code for sap exit variables?

    Hi,
    i) Where can I find the abap code for SAP exit variables
    OP_KEYDT used for the net due date
    OP_KEYD2 used for the posting date
    OP_KEYD3 used for the clearing date, which are used in FI AR aging report(0FIAR_C03).
    Based on the Net Due Date, which  is key date(0NETDUEDATE),  entered by the user at runtime, the posting date and celaring date are populated.
    II) The problem is we want to simulate a similar scenario, but with key date, which user enters is based on the custom  Net Due Date(ZNETDUEDATE).And this date is populated to posting date and  clearing date variables.
    How do we acheive that.
    Thanks.

    Please tell how u solved ur issue i have the same scenario to be do.

  • How to see the ABAP Code behind SAP Exit Variables.

    Hi Everyone.
    I was wondering if anyone could help me with the steps to see the ABAP Code behind a SAP Exit Variable.
    Sometime back I remember of going to Transaction SE37 - Function Module and give the Variable name,
    Eg: 0F_ADAY, Hit F4 or something like that and was able to see the ABAP Code/Function Module/Exit written for that Variable.same
    But today I tried to do the same thing to see the code for Variable 0P_FVAEX but I was NOT able to see it.
    I think I am missing something.
    Can someone help me recollect what I am missing.
    Thank You for your time
    NOVICE

    Hi bi novice,
    big sorry for the late reply!
    The following variables are defined in function module RREX_VARIABLE_EXIT as case statement:
    '0CMONTH', '0CWEEK', '0CYEAR', '0CQUART', '0DAT', '0CWD', '0FYEAR', '0FPER', '0FYTCFP',
    '0FYTLFP', '0FYTCD', '0CYTCM', '0CYTLM', '0CYTCD', '0LYTCLD', '0CMONTHT', '0CWEEKT', '0CYEART', '0CQUARTT', '0DATT', '0FYEART', '0FPERT'
    Best regards,
    Andreas

  • How to view output of SAP Exit variables

    Hi All,
    I want to view the data of standard SAP Exit variables. For example, for displaying the current date, SAP has provided some variables to use in the report. Can you please guide me where to get all the variables and how to see the output of these variables.
    Thanks.

    Hi,
    1) In Business Content all the variable will available.
    2) If you will proper standard variable in your report, there is no need to check still you need to check then use RSRT tcode, give the report name and execute with EXECUTE+DEBUG option.
    3) for example current calender day data need in report then standard exit variable to you character sticks or depend upon same logic directly use in your key figure, in this case for that key figure value always current day date.
    4) it may helps you and elaborate your idea and explore your issue for further discussion.
    Thanks & Regards,
    Srinu.Raport

  • Error when using SAP Exit Variable for Current Fiscal Period (0FPER)

    Hi Friendz,
    My requirement is to execute a query for the current fiscal period. I am using the SAP Exit Variable 0FPER.
    I placed this variable on char. Fiscal year/period 0FISCPER.
    When I execute the Query, it is returning the error: No value could be determined for variable ZVBSYCUR; Variables Contain Invalid Values.
    Please give inputs on how to use this variable.
    Regards...
    Ganesh

    Hello Dipika,
    I am also getting the same error.
    ERROR: Variable 0FPER could not be replaced.
    Yesterday we created one customer exit. But this should not affect the SAP Exit right? Till yesterday the 0FPER variable was working fine. I tried re-installing from BI content, but still getting the same error. If anybody has a clue please let me know.
    Thanks,
    Harshal

  • Where to find code of SAP-exit variables?

    Hi all,
    SAP is delivering SAP-exit variables like 0P_PPER3 (Last fiscal period) and so on.
    I'm wondering where to find the code of these kind of exits.
    As these are not part of enhancement assignment RSR00001 and then in the include ZXRSRU01 where the customer exit variables are maintained.
    Kind regards, Harjan

    Hi,
    These variables are not exactly the variables which use any particular coding. These are variables that use predefined replacement paths to derive the values. Please see the below documentation for same.
    http://help.sap.com/saphelp_nw04/helpdata/en/f1/0a5702e09411d2acb90000e829fbfe/content.htm

Maybe you are looking for

  • I need a code for verifiing my emailadress. How do get a new one ?

    Photoshop Elements 12 Share Try to send email directly from Photoshop elements The program ask for a code to verifiing my emailadress I need a code for verifiing my emailadress. How do get a new one ?

  • Open/Create file dialog can only create the file

    Hello, Very strange problem I got. The system is LabView 2014, on Windows 8. All 64bits. For long time I was happy and had no big problems with LV. However, after a few months without working on LabView, the LV got the problem. When I'm trying to ope

  • Playing ipod games on tv?

    i was just wondering if it was possible to play games from a 5G ipod video on a tv?

  • Airport to Sony TV?

    Trying to connect a Sony TV via Airport. Is this possible?

  • InDD CS4 crashes after any operation

    Hello, I was working on a about 130-pages text/graphic document when InDD crashed. No message, just "blink" and it went off. Since then, when I open that document, aftery any operation in the InDD it crashes again. I can see the document and browse t