BEx: Suppress message in workbooks after growup result area
Is it possible in BEx Analyzer to prevent or to autoanswer the appearing selection box, if after query update the result area has to growup over 'query foreign' not empty cells?
In the selection box there are options, to tell BEx how to handle the used cell (insert whole row(s), move existing cells down or to right, overwrite existing cells).
How can i suppress or autoanswer (with VBA??) this selection box??
JM
Hi Juergen,
The answer to your question is ... not that I know of.
What I do is try to avoid this problem to start with.
The problem is caused when user puts additional entries in columns to the right or rows below the result table.
The easiest way to avoid this is to move the result table to the right, or down, and tells users to put their additional entries to the left or above the result table.
Another way to handle the issue is to "Name" (in Excel) the range that includes all of the result table, plus any additional user (or VBA) entries to the right or below so that BW will recognize all of this as if it were the original result table ... therefore, BW will delete the extra entries before attempting to rebuilt the new result table.
The Name to use depends on the local query ID. For example, if the local query ID is "SAPBEXq0001", then the Name to use would be:
"SAPBEXqueries!SAPBEXq0001"
- Pete
Similar Messages
-
Warning message in workbook when execute it
Hi Experts,
When I execute a workbook ,I am receiving below warning message,
Warning: There is a condition on Customer Store ,results row suppress ,active on Customer
Warning: There is a condition on Customer PO Number ,results row suppress ,active on Custom
Warning: There is a condition on Material,results row suppress ,active on DIM1[ZDIM
After I select close warning message,it is excuting and results are shown.Today i automate the report execution.But its ended with ABAP\4 raise exception short dump and job got failed.Pls advice me how to avoid it.HI Malini,
Run the Queries induvidually in rsrt and suppress the messages in it.
Thne try to run the work Book.
Hope this solves the issue.
Regards.
Shafi. -
Overview of suppressed messages under transaction RSRT ?
Hi experts !
I wonder if there's a way to have an overview of all the messages suppressed in transaction RSRT ? A kind of table which shows what message is suppressed for what query ? Because I suppressed a message linked to a query and I didn't remember what query (but I remember what message !)
Best regardsHi Maria,
It is possible to see which reports have some of the warning messages suppressed but its difficult to find out which messages were suppressed.
In order to get the list of reports for which the warning messages are suppressed, go to the table RSRREPDIR, give the version as 'A' and display all the entries in this table. Display only the fields 'ID', Version, Infocube, QUery and 'Suppress Messages'. Then you sort the list in descending order of the field 'Suppress Messages'.
If there is a number in the field 'Suppress Messages' for example : the value is '4000000000000000000000000000000000000000000000000000000000000000' it means there is one or more messages suppressed for this query, if the value for Suppress Messages is '0000000000000000000000000000000000000000000000000000000000000000' that means there are no warning messages suppressed.
Usually if there is one digit in this field, it means there is one message suppressed, 2 digits - 2 messages etc... but i have not used it much.
You can then go to RSRT and check the exact messages suppressed for these queries.
Regards,
Shilpa -
How-to suppress messages in the Bex?
Does anybody know if it is possible to suppress any messages in Excel? Not only warnings - I know how to do it - but ALL messages, even those created into SM02. Our system: BW30B, patch14, Bex latest patch
Thanks for any help. Ioan.Kala : I was thinking that RSRT changes are manual changes and need to be done in every system. If, what I am thiking is wrong, pls let me know how you are transporting the RSRT changes.. Thanks..
Today I found different message when I was running my Workbook. it appears only when I execute the workbook after opening the session on any Characteristic I would like to drill down.. after that .. the message never comes back.. here is the message below:
"SAP BEx: Not enough cells to display results" --
"To extend the results area to the right"
and I get 3 options as below
1. Overwrite existing cells
2. Insert cells next to the results Area
3. Insert entire columns..
and I did not find such message in RSRT.. Please let me know any work arounds and also please feel free to ask for further info --
Thanks alot
Mavi -
Error In WorkBook Bex Analyzer : Messages available
Hello Experts,
When i open a Workbook, I have this message in the status bar:
"Messages available; double-click to display them"
When I double click, I have a pop-up window with warning "there is a condition.., results row supress..."
Our client don't want to see the message ""Messages available; double-click to display them", When he opens his workbook.
How can we do this, Please?
I found this link:
http://help.sap.com/saphelp_nw70/helpdata/en/89/127f4a697c49a7896f18a45dd30e8b/content.htm
But it doesen't work!
Many thanks.
Best regards,
AmineHi Amine,
Option 1)
Try this - there is an option called "Show messages for problem analysis" in the behavior tab of global settings. try to uncheck that if it is checked.
or
Option 2)
Try Note 1009903 - Suppressing messages for all queries
or
Option 3)
Use tcode RSRT and type in the tcode "SUPPR_ALL" and check all the suppress messages.
Hopefully you will succeed.
Regards
Sunny -
Problems with result area in workbooks after upgrade to BW 3.5
Hi,
we are experiencing some problems with our <b>workbooks</b> after the upgrade to BW 3.5. When refreshing all queries in a workbook (that was there before 3.5) without selecting a specific query we get the message <b>'Result area</b> cannot be found, specify a new one'. After selecting, the message appears again in an infinite loop.
Has anybody had similar problems and has found a solution for this?
Thanks,
EMSHi,
I am having that message, always if I delete a Sheet which contains an embeded query.
Even the sheet is deleted, the SAPBEX has information of all the embeded queries, and tries to find the Result area to put the data.
To find out if this is your case as well,
select an empty cell in a Sheet and continue like that, until all the embeded queries are been displayed.
Regards
Vasso
Message was edited by: VASSILIKI SIAGRI -
Suppressing BEx Analyzer messages
Dear all,
I would like to suppress SAP BEx Analyzer messages (In BW 3.5). I know that the in the BEx you can use the setting suppress warnings, but is the also a way to control this from the back-end?
Be aware the messages are Analyzer messages not query messages. So RSRT setting won't help.
I've looked at the blog How To Suppress Messages Generated by BW Queries from Marc Bernardbut this is not the solution
Suggestions are welcome.
many thanks
RobHi there,
No they don't.
Maybe we're not talking about the same how to. Here it is:
[http://www.sdn.sap.com/irj/scn/weblogs;jsessionid=(J2EE3414700)ID1791455950DB00849752428597445659End?blog=/pub/wlg/11067]
In this how to, you're supressing in the back-end a particular message that is not in the RSRT for all the users or all the options when this message appears.
Diogo. -
Error msg: "Config message not received after 45 seconds"
I have developed a simple stateless session bean. After being called once, the following is output to the log:
Thu Jan 04 18:15:46 CST 2001:<I> <RJVM> Signaling peer 3978882810638278829C198.171.129.36 gone: weblogic.rjvm.PeerGoneException:
- with nested exception:
[java.net.SocketException: Connection reset by peer]
Exactly 45 seconds later the following is output and I can no longer access a JDBC connection from my pool:
Thu Jan 04 18:16:31 CST 2001:<I> <CliCon-#|myserver|0.978653734170> Connection to client for ClientContext - id: '#|myserver|0.978653734170', bound: 'true', dead: 'false' has been unexpectedly lost be
cause weblogic.rjvm.PeerGoneException: Config message not received after 45 seconds.
Initiating hard disconnect.
Can anyone shed some light on this for me?
Thanks in advance!Hi,
this is the explanation why this occours:
If there is a t3 Client connects to the server, every ( weblogic.system.configTimeoutCheckVal
) time, ConfigTimeoutChecker will run to check the t3 client is disconnected or
not. The problem is, if the client has already disconnected, the ConfigTimeoutChecker
still runs every time to check the disconnected t3Client again and again.
This should be solved with SP11.
Christian Plenagl
Developer Relations Engineer
BEA Support
"kelvin" <[email protected]> wrote:
>
I am using WLS 5.1 sp8 128SSL, I got this error. I results that the java
object
in the JMS channel is sometimes missing. I increased the weblogic server
thread
from 15 to 30. But still can't help. I also ugrade the client server
to use the
same sp8. But can't help. Some one mentions the sp9 can solve this problem.
It
is true? anyone have it for unix ? where can I download it? I can't
find it in
weblogic web site.
Kelvin -
Retrieving BEx Query Results Area for use in Excel formulas
Hello,
I run BEx queries in workbooks and then use Excel formulas ( mostly VLOOKUP(LookupValue, ResultsArea, ColumnReturned,) ) to retrieve certain information from the query ResultsArea.
****Problem:
Depending on the query parameters, the query "Results Area" is larger or smaller.
****Non-optimal solution:
One way to define the ever changing Excel range occupied by the Results Area is to create an Excel name as:
QueryRange = OFFSET(QueryFirstCell,,,COUNTA(OFFSET(Sheet1!$A:$A,,COLUMN(QueryFirstCell)-1,,)),COUNTA(OFFSET(Sheet1!$1:$1,ROW(QueryFirstCell)-1,,,)))
Then, the only input required is the top-left cell of the Results Area, which stays the same (unless the query definition changes).
****Question
What is the best way to refer to an ever-changing query Results Area in an Excel formula?
Thank you!
LouisIt is actually much easier than that.
Use a VBA statement like the following:
Set RptRng = ActiveCell.CurrentRegion
This will retrieve the data in the Results Area, no matter what the size is.
Hope this helps...
Bob -
Insert a Blank Column in the Results Area of a Workbook
Is it possible to insert a blank column in the results area of a WORKBOOK that does not get affected by free characteristic drill down or refreshing of the corresponding query? The current workbook looks like follows
Column A - Characteristic1
Column B - Characteristic2
Column C - KeyFigure1
Column D - KeyFigure2
Column E - KeyFigure3
Column F - KeyFigure4
The requirement is that the user wants to enter some estimates between Column B and Column C and Column D and Column E as follows
Column A - Characteristic1
Column B - Characteristic2
Column C - USER ENTRY
Column D - KeyFigure1
Column E - KeyFigure2
Column F - USER ENTRY
Column G - KeyFigure3
Column H - KeyFigure4
Column I - CALCULATIONS BASED ON USER ENTRY
First I tried to split the results area and save the workbook. But when the query is refreshed then the entire results area gets back in one piece. I succeeded partially by having a key figure with no possible output (i.e., restricting a non-existent value on a characteristic). Again in here, whatever user inputs will get wiped out with the drill down. Does any one have any pointers? Thanks.
ISHi IS,
As a nearly workaround I can suppose to do the following.
Create two identical requests.
In the first one hide the columns to the right from your intended new user column. In the second one - hide columns to left.
Knowing the columns number to be shown in each request you can place both request in the same row, but in different columns taking into account that between result areas should be one (or more) additional column.
Data entered by a user will not be wiped out during query refresh or drilldown. Of course, these user data will not conform drilldown operations. So, it is not 100% solution you want.
Another possibility, very hard to implement (if feasible at all), is to write VB code that will monitor user action and will keep data entered by a user somewhere in another sheet and restore them in proper cells after user action (drilldown). But I don't think such coding worth it.
Best regards,
Eugene -
BEx Map in Excel: Print only result area
Hi experts,
I am in BEx Map - Excel, and I am trying to print the result area ONLY, without key figures, legend and so on...
Print Preview in Excel shows the key figures on the left, the legends on the right and a little version of the map (as if way too zoomed out) in the middle.
I know there is a post dedicated to the "print only result area" but its solution is "web only"
Thx,
OlivierArun,
Attaching a map in BEx-Excel is different from attaching a chart. When attaching a map, you can't choose in which sheet/workbook the map will be displayed. A new sheet is automatically added to the workbook holding the BEx query, period.
But thx anyway. I did try your thought -
Result Area in workbook is selected
Hello Experts,
I am facing a problem with my workbook.
Upon opening the workbook and after query refresh, all the result area gets selected. [Like we select any cell with Shift Key] And when I click anywhere in the workbook, it goes away.
I tried -
To remove result area, remove query from the workbook, save workbook as new etc. options, but nothing works.
Please advice if anyone knows the solution for this Problem. Thanks.HI
I had the same problem. This problem raises generally if you change the query after hiding the sheet and then executing the query. Unhide all the sheets whatever you hide in a workbook and go to query designer save the query (one by one) and execute. Now hide all the sheets which u want to hide. Save the existing workbook.
To test it.Open the workbook and click on refresh.Say yes to refresh all the queries then it will execute fine. This is the case iam talking where you have a query result displayed with different colours or formats in seperate sheet which is linked to original sheet which is hide.
Thanks
k -
Hi. I am getting a warning in BEx report, Brain Message number 223. When I go to RSRT--> Messages, I don't find the message number in any of the message categories.
Is there a way to insert the message number 223 in RSRT--->Messages?
Thanks all.Could not find a quick way to add missing messages in the RSRT suppress messages option...
May be there is a standard userexit that can be used to populate data into the underlying table.
However, there is an option in the BEx itself, where you can suppress all messages. In case you don't know that, it can be set-up by going to the 'Business Explorer' tab on the menu bar then 'settings' then 'suppress warnings from server'.
This setting will suppress all the warning messages.
Hope this helps.
AT -
I am unable to open Calendar on my iMac - this occurred after installing Security Update 2015-002. I don't know if related. A message pops up after several minutes saying Calendar quit unexpectedly (but it never really opens). How do get Calendar back?
Hi Magsrobby,
Welcome to the forum and thanks for posting. I'm really sorry to hear you've had so many problems. I can look into this for you if you wish. Drop me an email with the details. You'll find the "contact us" form in the about me section of my profile. Once I have the details we'll take it from there.
Cheers
David
BTCare Community Mod
If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
We are sorry but we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-) -
I have a new Dell computer running windows 7 and am unable to download itunes. The message I recieve after trying to run the download is: This installation package could not be opened. Verify that the package exists and that you can access it. Any ideas?
Hello tcampbell1549,
Thank you for using Apple Support Communities.
For more information, take a look at:
Issues installing iTunes or QuickTime for Windows
http://support.apple.com/kb/ht1926
Have a nice day,
Mario
Maybe you are looking for
-
I tried to update my iTunes so I could put some songs onto my ios 7 device and it wouldn't update. I would get a fail message. I went to the apple website and reinstalled it. After my computer restarted, I clicked on iTunes and said file not found. I
-
Dreamwaver CS3 & Flash CS3 or GoLive 9 on Mac?
I have a PowerBook G4 with 10.5.2 on it. I am wanting to do more interactive website design so I was looking at DW & Flash but I have used GL 9. I have used DW MX 2004 but I did not like it at the time. I am more of a visual type person so I prefer b
-
Automatic load of bank account from transaction FEBAN
One of the search possibilities in FEBAN is the search of customer number by bankaccount. Is there a possibility to automatic load the customer bank accounts from the electronic bankstatement into SAP.
-
Year Ago Measure group by problem.
Hi, In my report I have two measures Revenue and Revenue Year Ago. Revenue Year ago is calculated based on the Ago functionalty and the time dimension level is "Year" AGO(Fact.Revenue, TimeDimnesion."Year", 1). The problem is that the column measure
-
Using Kernel32 and Shell 32 in java
How to use Kernel 32 and Shell32 dll files for Accessing URL in java.