Bex Toolbar not available (disable)

I had just installed GUI 7.10 patch 6 on BI 7.0 system I am using excel 2003 but now analyzer toolbar is disabled.
It is shown grayed, I had tried to Uninstall and reinstall the GUI many times but nothing happens.
Please help
Thanks in advance
Vivek Tripathi

Having this issue with Office 2010 and Office 2007. The SAP Note that solves this is for Office 2003, and this patch wont install on a computer without office 2003 installed. Does anyone know how to resolve this on a Office 2007/2010 machine?

Similar Messages

Bex browser (not available)

Hi friends,
In my system, i'm unable to see BEx browser option. Whereas i'm able access that option in my collegues systems.
Why it's not appearing in my system? Ours is bi7.0 with SAPGUI7.10 (patch12). Bex 3.x tools are there in my front-end.
thanks,
Raju

Hi Raju,
BEx browser is available with SAP BW 3.x.
can you check
Start -> programs -> Business Explorer -> Business Explorer (SAP BW 3.x) -> Browser (SAP BW 3.x).
Best Regards.

BEx Browser Not available in my system

Hi,
We have GUI of 7.10. version and Bex 3.X. I am able to find Bex Browser in other system of my friends.But it is not avaible in my system.
What would be the Reason?
We have support package 22.
Patch Level 12.
Regards,
Naresh.

Hi,
When you install "BW 3.50 Add-On for SAP GUI 7.10",it will install Browser (SAP BW 3.x) under Business Explorer(SAP BW 3.x).If you couldn't find it,please uninstall and reinstall the BW 3.5.
The BW 3.5 patch 8 in SAP GUI 7.10 is released to the SMP now and is available for download.You can try with this.
Rgds,
Murali

Start Firefox and homepage is not displayed; cannot navigate back to previously viewed pages using back or forward arrows; bookmarks toolbar not available on start-up though selected in options menu.

1. Start firefox and my homepage is not displayed--there is no webpage displayed on initial startup. A homepage is listed in the options menu. In order to see homepage I need to manually press the home icon to the right of the search box.
2. I am not capable of using the navigation arrows to the left of the address bar to navigate to previously viewed webpages. The arrows are present but are gray. Is there a setting in the security tab of the options menu that disables the navigation arrows for security purposes (i.e. not remembering webpages or cookies, etc.)?
3. Though the bookmark toolbar is selected in the options menu, the bookmarks toolbar is not visible when starting firefox. Instead there is a red firefox toolbar located at the upper left of the screen. In order to view the bookmarks toolbar I need to go into the options menu and de-select the bookmarks toolbar (causes the red firefox toolbar to disappear) and then re-select the bookmarks toolbar.
Any information to help correct these issues is greatly appreciated.
Mike

''framerotblues'' suggestion worked for me. I was having the following problems after 10.0 update:
>No back/forward buttons.
>Nothing in address bar.
>Bookmark toolbar would not automatically load. Even though it was checked as a toolbar to view, I had to uncheck and check it again every time I closed/opened Firefox.
>Could not access add-ons. Neither through menu toolbar nor using ctrl-shift-a
Restarted Firefox with add-ons disabled (help->restart with add-ons disabled). Removed ''Facebook Disconnect'' from add-ons. Restarted and everything seems to be working.

Adobe PDF Plugin Toolbar Not Available

Firefox 17.0.1 on Windows 7 32-bit.
I have Acrobat Pro 10.1.4.38, and the Adobe PDF plugin is enabled. However, when I look at the available toolbars the Adobe PDF Toolbar does not appear. Thus I am not able to save web pages as PDFs.
Is there a special switch to enable this toolbar?

I don't think you are responding to my initial question. I don't see how your responses have addressed the issue, namely that I want to see the Adobe Toolbar available on the Firefox main page.

I installed AVG 2011 Free, and Firefox 4 today on a friends compouter. The AVG Safe Search Toolbar is not available, even after disabling and enabling the Add On. I use AVG 2011 full Licence with Firefox 4 at home no problems. How do I fix this please

Works in IE no probs, Add On shows in Add On's List. AVG Safe Search Toolbar not available in toolbar lists.

Because I am having issues with Norton Security Suite with the upgrade to Firefox 4.0.1, I have been dealing with that as well, with no success to-date. However, I did notice today when I was looking in my trash, an interesting thing occurred with the upgrade that MAY have something to do with the apps. in Facebook not working correctly now with Firefox.
In my trash, there are several folders of 'Recovered Files'. Two of them are loaded with Internet Plugins for Facebook and were all dumped on May 1st, the day I upgraded to v. 4.0.1 Firefox and began having all my problems. For example, they are plugins like: plugin-cross domain.xml, plugin-gateway-1.php, plugin-102452128776.gz-72.json, just to name a few of them. Now, I am wondering if they were inadvertently removed during the upgrade process, or if they are in conflict with the new upgrade. Should I put them all back into Library -->Internet Plug-Ins to see if that resolves the problems? There are so many of them, I wish there was a way to mark them in some fashion in case I would have to remove them and not take the wrong ones out! Maybe there is a way I can color code them before I move them. I hate using 2 browsers!
I notice that 2 other people have this problem but I don't see where they left any post. I really wish Norton, Firefox, and Facebook would get this ironed out. I never had a problem with anything until this and I don't like to spend all my time trying to troubleshoot something I don't understand! Anyway, thanks for listening.

HT201263 my nephew made a new password and now cannot remember, he has tried several times but now the I Pad is disabled and he cannot try again for 22,980,298 minutes. The original computer it was synced to is not available. We just want to start over

my nephew made a new password and now cannot remember it. He has tried numerous times but now the I Pad is disabled and he cannot try again for 22,980,298 minutes. The original computer it was synced to is not available. We just want to sta

How can I unlock my iPad if I forgot the passcode?
http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.htmlhttp://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212http://support.apple.com/kb/ht1212
How can I unlock my iPad if I forgot the passcode?
http://tinyurl.com/7ndy8tbhttp://tinyurl.com/7ndy8tb
How to Reset a Forgotten Password for an iOS Device
http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Devicehttp://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htmhttp://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
You may have to do this several times.
Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just canceling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
 Cheers, Tom

Autofill in Google Toolbar does not appear to be working with Firefox 4 - Aways saying Autofill not available for this page even on pages I have used it before FF4 upgrade

Autofill in Google Toolbar does not appear to be working with Firefox 4 - It aways gives the message "Autofill not available for this page". This is happening on pages I have used Autofill on before upgrading to FF4 from Firefox 3.5.x

i did not see a solution posted - I tired what I read. Going back to an old version may solve the problem but it is a stupid solution so I have yet to do that.
I am on version 4 and autofil this does not work :
Popular answer Go to this answer
Uninstall version 5, then Google "google toolbar version 4", follow the link to FileHippo.com, and download and install the last version 4. When you reinstall it, make sure you turn off the option to perform automatic updates.
6 of 7 people found this answer helpful. Did you? Sign in to vote. Report abuse

0repmode "Restatement" value is not available in the BEx query

Dear SEM-BCS experts,
We need to select 0repmode "Restatement" value in a BEx query, but it is not available (only # and Standard). The query is based on the SEM-BCS virtual cube. We use SEM-BCS version 6.02.
I would be grateful if you could help us to resolve this problem.
Mila

Dear Mila,
Report mode. "Restatement" availability purely depends on the settings made for
the transaction data transfer ; between Transaction cube (BCS cube) to Reporting cube (BW cube).
Please check in the info package created for Transaction cube(BCS Cube) where in you can see the available options. If the data transfer is happening with reporting mode "Restatement" then it should be available.
Most of the people use one Standard (S), Purchase (P).. but Restatement (R) option also available.
Hope this will give you clarity.
Thanks
kamal

Roboform toolbar is not available in the latest version of Firefox. Or, if it is, I don't know how to enable it.

Roboform toolbar is not available in the latest version of Firefox. Or, if it is, I don't know how to enable it. Te toolbar4 used to be selectable from the view dropdown menu.

Roboform have made a marketing decision to only make version 7 of their toolbar compatible with Firefox 4, and you need to pay to get the upgrade.
A free alternative is the LastPass Password Manager - https://addons.mozilla.org/firefox/addon/lastpass-password-manager

BEx Transport Requests '' ist not available or not suitable

hi, all,
I want to change a query, that has been transported back from Prod.System into TestSystem. Changes in the query aren't possible - the error message is
" BEx Transport Requests '' ist not available or not suitable ".
Now, there is a Standard BEx Transport Request and, in the RSA1 -> Transport Connection I see the query complete with that Transport Request.
What can the reason be? Any Idea?
Thanks a lot in advance.
neven

Ciao, Paolo,
thank you for the quick responce.
I did exactly as described :
The easiest thing to do is the following:
1) collect your query in transport connection
2) check if it is already assigned to a transport
2a)if assigned to a transport check if this is the standard bex transport. If so go to step 3, If not see if you should just tranport that request (or you can just go to step 3...but i wouldn't advise that)
3) unlock the standard bex request
4) now go back to transport connection and put the collected objects in a new request
5) release and transport your new request
It still doesn't help. I can't change the Query. The error-message is stil the same.
best regards
neven

Bex Transport request is not available or not suitable

Guys,
I need to make changes to query when I open it...it's saying Transport req is not available. So I have collected the query in a new transport in transport connection, but when I go back to the query its still giving the same error message. How do I resocve this error?
The transport it is showing in the query was deleted, so I cannot use the old transport.
Thanks,
Kris

Hello Kris,
What Mahesh said will solve your issue but once you transport that request you will again get the same error when you open any query in BEX. One way to get around this issue is for the first time create a request using the BEX transport button in transport connection and always keep this request open. If you want to transport a query that is assigned to this request just unlock this request using se03 and then collect your query and the corresponding objects in a new request in transport connection and transport the new request. This way atleast everytime you open a query you will not get the error.
Hope this helps.
Thanks

Bex Transport request is not available

Hi guys
I want to change the Bex query from query designer, when i go for change mode it didnu2019t allow me to change and throws error message "Bex transport request " is not available or not suitable" and in second line it gives "choose an existing request.
Can any one tell me how to change the Bex query with a transport request?
Gaurav

Hi,
You get this message if you have captured the query in a transport request and released or transported the request.
You can somply capture the query in a new request again from transport connection and then you will be able to edit the query.
even after capturing the query in the request is not allowing to edit then you need to try the option as explained by our friend above.
Regds,
Shashank

BEx Transport Request is not available or not sitable

Hi,
When i try to install some queries from Business Content in the BW DEV box, the error was :
<b>BEx Transport Request is not available or not sitable</b>
Please let me know what has to be done in order to get out of this error
Thanks & Regards,
Kishore

Hi Ken,
Thanks for responding to my problem.
You are right. I am installing from business content queries that have never been installed before.
so when i am installing the queries from business content the error was :
BEx transport request is not suitable or not available.
How to proceed now ?
Please give reply ASAP....
Thanks & Regards,
Kishore

Why I cannot disable the security passcode on my iphone the option is not available?

why I cannot disable the security passcode on my iphone the option is not available?

I have the same issue. I don't have, or have never had any Exchange account on the ipad. A simple yahoo email accout is the only one on it. I have turned off all restrictions, and restarted several times. Have yet to reset or restore, would just like to get rid of the passcode, but I can't......Thanks for any advice.

Bex Toolbar not available (disable)

Similar Messages

Maybe you are looking for