BEx Variables - Customer Exit - Find Max and Min of two values

Hi Experts, I have two ID's at any given time in my InfoProvider. I'm trying to create two user exit variable on this ID. One should return the max of the two and the other should return only available one (i.e. the Min). The variable should not prompt the user for any value. Any time the variable is used in the report. max should the max of the two ID's and the Min should show the lower of the two values.
I would appreciate if somebody could provide the code that I can use.

you could use below:
Variable for Max
SELECT MAX ( ID Field )
FROM <Source>
INTO <wa_id>.
Variable for Min
SELECT MIN ( ID Field )
FROM <Source>
INTO <wa_id>.

Similar Messages

Thread use to find max and min in an array of objects??

Hello everyone,
I need to find the min and max int value in a array of Objects.
This has to be done using threads--like divide the entire array into 10 or so blocks and find the local min and max in each block., Each block is run on a thread and finally comparing them to find the global max and min.How should I do this? I am new to Java programming and in particular to threads.
Thanks for your time and patience in answering this newbie question.
JP

Hi,
if i understand your problem, you have a big array with a lot of int values and you need to create a few arrays with a part of the big one in each, next each in a thread find the max and the min, next return the max and the min of each thread and compare these max and min to obtain the globals max and min?
In that case you can create a class in which is your big array. you create a second class implementing Runnable, in its creator you put the instance of the
first class and 2 int which are the beginning and the ending index. in this class add a method run in this method you create a loop to compare the current value to the max and min values, and you replace if you need to do. In the first class you put the main where you create a few instance of the second class in a thread :
private Thread threadName = new Thread(new SecondClass(this, start, end));
Next you start all these thread:
threadName.start();
At the end of the run method of the second class you have to write your result in the max and min fields of the first class(int type, you have to create it)
Write it only if it's necessary (if the current max is > than the already existing max).
I think it's complete!
Sorry if it's not really easy to understand, I'm french, but you can answer if you have more questions.
S�bastien

How to debug i_step=0 Bex Variable (Customer Exit)

Hi all,
can anyone please help me regarding following problem:
I have a variable (customer exit) in a query. This is for hierarchy authorization.
This variable is mentioned in my analysis authorization (Infoobject 0COSTCENTER).
Now i want to debug the coding when execute the query in TA RSRT.
But when i set a break-point. The i_step starts with 1. I want to debug
the coding when the i_step is 0 !!!! Any idea?
Best regards,
Frank

Here a break solution:
only for develop system-
you can set this code at start of the include:
DATA: flag TYPE c.
WHILE flag IS INITIAL.
ENDWHILE.
let start the query, then go to SM50 and take in debugging the process in loop. (Programe/mode-program-debugging).
Pay attention leave the code immediately after that.

Finding Max and Min values

Hi Gurus,
I have a table with one column as data type NUMC of lenth 5.
Now, I have to get the max value and minimum value from that column into two variables of same type.
Could you please help me with the logic and code in ABAP.
Thanks,
Regards,
aarthi

select single MAX( <field> ) from table into <variable>.
select single MIN( <field> ) from table into <variable>.
Message was edited by:
S B

Do we write variable customer exits for virtual key figures in Bex?

Hi all,
Am I thinking the right here " We write variable customer exits in CMOD for virtual key figures in BEx " or am I totally wrong. If thats the case where do we write it.
Thanks,
JB

Nevermind

No Query Result After Using Hierarchy Node Variable (Customer Exit)

Hi
I have problem at my query. It doesn't show anything in BEx but when i check the data in BW using tcode LISTCUBE i can display the data.
This problem happen when i change the restrictions for one of characteristic in filter value.
The characteristic is custom Infoobject (ZCPARTNER), which like Infoobject Partner Unit.
Previously I set the restriction with constant value, example : A500,A700,A710,A720,A730,A740 and it worked before.
But when I change it using hierarchy node variable (customer exit), this problem is arise.
Here is my code at ZXRSRU01
WHEN 'ZHIEPART'. --> hierarchy node variable
   BREAK-POINT.
    IF i_step = 2.
    Read from ZZCONSGR information
      LOOP AT i_t_var_range INTO loc_var_range
         WHERE vnam = 'ZZCONSGR' OR vnam = 'ZOCONSGR'. --> read input value from consolidation group variable
        CLEAR l_s_range.
        CLEAR l_s_range-low.
        IF loc_var_range-low EQ '000000000000030000'
           OR loc_var_range-low EQ '000000000000010130'.
          l_s_range-low = 'MEZBUNITMDI'.
          l_s_range-high = '0HIER_NODE'.
        ELSEIF loc_var_range-low EQ '000000000000040000'
           OR loc_var_range-low EQ '000000000000010160'.
          l_s_range-low = 'MEZBUNITMPI'.
          l_s_range-high = '0HIER_NODE'.
        ENDIF.
        l_s_range-sign = 'I'.
        l_s_range-opt = 'EQ'.
        APPEND l_s_range TO e_t_range.
        EXIT.
      ENDLOOP.
    ENDIF.
Here the hierarchy in BW system:
XXX Cons Unit Hierarchy Set; InfoObject ; Node Name
- XXX Cons Unit Hierarchy Set; 0HIER_NODE; ZBUNITALL
- XXX DownStream ... ; OHIER_NODE; MEZBUNITMDI
     - ME/A730; 0CS_UNIT; MEA730
     - ME/A740; 0CS_UNIT; MEA740
- XXX Power ; OHIER_NODE; MEZBUNITMPI
    - ME A800 - A808; OHIER_NODE; MEZBUNITMPI
    - PT Mitra xxx; 0CS_UNIT; MEA820
Anyone can help my problem? Thank you
Regards,
Satria B Tandyono

Hi Satria,
Instead of following code ---
CLEAR l_s_range-low.
IF loc_var_range-low EQ '000000000000030000'
OR loc_var_range-low EQ '000000000000010130'.
l_s_range-low = 'MEZBUNITMDI'.
l_s_range-high = '0HIER_NODE'.
ELSEIF loc_var_range-low EQ '000000000000040000'
OR loc_var_range-low EQ '000000000000010160'.
l_s_range-low = 'MEZBUNITMPI'.
l_s_range-high = '0HIER_NODE'.
ENDIF.
try this ---
IF loc_var_range-low EQ '000000000000030000'
OR loc_var_range-low EQ '000000000000010130'.
l_s_range-low = 'MEZBUNITMDI'.
ELSEIF loc_var_range-low EQ '000000000000040000'
OR loc_var_range-low EQ '000000000000010160'.
l_s_range-low = 'MEZBUNITMPI'.
ENDIF.
Note : whenver the option is EQ, the system takes only low value.

I am a rookie and need help with max and min values

Hello all, i am into this intro to java class. my assignment is to write a program that prompts the user for two integers and then prints the sum, difference, average, product , distance (absolute value of the difference) Maximum(largest of the two) and Minimum(smallest fo the two) here is my code so far
import java.io.BufferedReader;
import java.io.IOException;
import java.io.InputStreamReader;
import java.lang.Math;
public class Sample4
   public static void main(String[] args) throws IOException
      try // attempt the following
{           // create the stream to read from
InputStreamReader istream = new InputStreamReader(System.in);   // create a buffer to hold the stream
BufferedReader console = new BufferedReader(istream);           // prompt the user
      System.out.println("Enter a number please");              // get input as a string
      String input = console.readLine();                        // convert to an integer
      int num1 = Integer.parseInt(input);
      System.out.println("Enter a number please");              // get input as a string
      String input2 = console.readLine();                       // convert to an integer
      int num2 = Integer.parseInt(input2);
      int sum = num1 + num2;                                    // get the sum of the two inputs
      int difference = num1 - num2;                             // get the difference of the two inputs
      int product = num1 * num2;                                // get the product of the two inputs
      int average = sum / 2;                                    // get the average of the two inputs
      int abs = Math.abs(difference);                           // get the absolute value of the two inputs
          // new section
             // display the number
      System.out.println("The total sum = " + sum);
      System.out.println("The total difference = " + difference);
       System.out.println("The total product = " + product);
       System.out.println("The total average = " + average);
       System.out.println("The total absolute value = " + abs);
} // if something breaks, catch the exception
catch (IOException e)
   System.out.println(e); // displays the exception
   System.exit(1); // quits the program
}what will be the right syntax or code to find the MAX and MIN values of two numbers a User Inputs, hope someone can help with this. thank you for your help.

Thanks alot man, sheesh i do not know why my book
doesnt give me all the static methods. but i do really
appreciate your help. peaceA complete list of the java.lang.Math methods can be found at http://java.sun.com/j2se/1.4/docs/api/java/lang/Math.html
btw,
max(a, b) == (a > b) ? a : b
min(a, b) == (a < b) ? a : b

Text Variable(Customer Exit) displays variable name instead of its value.

Hi Gurus,
My requirement is to display the year(from variable) as the field name i.e Year end salary 2009.
I was using the fields name as hardcoded values like 2009 but as per my requirement i need to display it from the variable.
I tried using Text Variable using customer exit, but I'm getting variable name(zvariable) instead of value(2009).
Please help me out, many thanks in advance.
Regards,
Ankur

Hi,
Actually I tried to create a Text Variable with Replacement Path.
But here the problem is that we have a Characteristic Variable (Customer Exit) which is not listing in the selection box of Replacement Path.
Hence we tried to create another Text Variable (Customer Exit) and refering to the same Customer Exit code.
Regards,
Ankur

Exclude in variable customer exit

Hello,
Can you help me solve problem with exclude in variable customer exit? I have z-table with name of variable and values. Primary I need save multiple values with exclude. I was tried this code:
if i_step eq 2.
select * from zbwsd_01 into table i_t_var
     where vname = i_vnam.
l_subrc = sy-subrc.
else.
l_subrc = 4.
endif.
if l_subrc = 0.
loop at i_t_var.
    CLEAR L_S_RANGE.
    L_S_RANGE-LOW = i_t_var-value.
    L_S_RANGE-SIGN = 'E'.
    L_S_RANGE-OPT = 'EQ'.
    APPEND L_S_RANGE TO E_T_RANGE.
endloop.
else.
I have NW2004s. Have you some idea?
Thanks a lot
Jiri

Exclude is ok, if I use variable type Selection option. For type Multiple value this is not valid

Problem in the variable customer exit in the query jump target

Hi developers,
we have problem because we have created a variable time on 0CALDAY who is mapped in the cube of the stock with posting date.We launch the query for example with range 01/8/2005 31/8/2005 and the resul is OK.
Then we jump on the other query where the users wish see the result of the posting date for the period 01/8/2005 31/8/2005 For resolved this problem we have created a variable customer exit for the characteristic 0Postingdate and have inserted the code in user exit variable:
WHEN 'ZV_CEREG'.
    IF i_step = 2.
      LOOP AT i_t_var_range INTO loc_var_range
             WHERE vnam = 'Z_DAT_AN'.
        CLEAR l_s_range.
        CLEAR datastock.
        l_s_range-low = loc_var_range-low.
        l_s_range-high = loc_var_range-high.
        l_s_range-sign = loc_var_range-sign.
        l_s_range-opt = loc_var_range-opt.
        APPEND l_s_range TO e_t_range.
        EXIT.
      ENDLOOP.
    ENDIF.
When we effectued the jump the our objective is transfer the date inserted by user in the variable of the query sender 'Z_DAT_AN' to the variable of the query receveir 'ZV_CEREG'.
This step it does not work correctly, this why are different query?
You can help me for resolved this problem!!
Thanks Domenico

Hi,
I think, this approach does not work. Because customer exit will be finished before displaying the result set of 1st report. So the assignment to VAR2 from VAR1 does not execute then after.
I hope, In RSBBS,after assigning receiver, in the assignment details,select 'Variable' for 'Type' of 'infoobject' 0calday.And select '0Postingdate' for 'fieldname' and select 'selection options' for selection type.
Take help.sap.com help for further information.
With rgds,
Anil Kumar Sharma. P
Message was edited by: Anil Kumar Sharma

How to use select max and min query..

hi gurus,
we have got a custom report for develoment.
the report has to fetch the max and min salarys department wise....
how to pick up max & min sal ansal from table pa0008.

Hi,
Try the following
select max(sal)
           min(sal)
           from <database table>
           into <internal table>
           group by department
           where <where condition>.
Here we assume that sal is the field holding the salary and department is the name of the field in the database table. Where condition is optional.
Hope this helps.
Regards,
Sachin

RSBBS - create a variable customer exit based on initial selection

Dear all,
I am using RSBBS (RRI) to jump from one query specific cell to another query. The destination query gets the parameters from the selected cell. In order to achieve this, the only thing we have done was to insert the relevant characteristics as Free Characteristics on the destination query (no variables were required).
Now, I need to add a new variable on my destination query. This variable should be a customer exist based on one of the paramenters that the destination query gets from the original query. How do I get this value to use it in the variable customer exit???
Thanks in advance

Thanks for your reply,
I got it in a different but not tottally different way from wthat you suggested.
I have created a variable () (ready for imput) for my characteristic. However, on transaction RSBBS, when defining the target query, I went to "Assigment Details" option and for my characteristic, I have changed the type form "generically" to "variable" and choosed the field name of the variable ().
In this way the target report gets the original report definition for this characteristic as a variable that I can then use on my costumer exit.
I have tryed and worked...brilliant!

Line Profile Max and Mins

Hi,
I am trying to store the max and mins from a line profile that I generated from a picture into a spread sheet and also calculate the average max and min. It seems like it should be a simple thing to do, but I can't seem to find an easy way to do it.
I just thought I would try to see if someone has done this before and can enlighten me!
Thanks
I am attaching a Line Profile Sample file is you want to use it to try your idea out.

Hi BlueEyes76,
What version of LabVIEW are you trying to do this in?
In most versions of LabVIEW, if you go to Help->Find Examples and search "spreadsheet" you will see a number of VIs that read/write data from spreadsheet files. Of particular interest may be the "Using Spreadsheet Format.vi".
As for calculating max and min, there is a VI "Array Max and Min" in the Programming->Arrays function palette that will allow you to input an array of numbers and output the max and min.
Please let me know if I can be of further assistance.
Eric V
National Instruments
Applications Engineer
Certified LabVIEW Associate Developer
"I'm a Ramblin' Wreck from Georgia Tech and a helluva (NI Applications) Engineer!"

How to get Max and Min in one line .

Hi Guys
I know the program which I did is stupid .. I am getting the result for max and min value?
But I how can I get the value of km, h, lit in one line
Equno..max_date,min_date,min_value_km..max_value_km....min_value_h...max_value_h...min_value_l...max_value_l
with my program i am getting the vlaue of max and min value but not in one line.
the main parameter is recdu which is KM,L,H
Can anyone tell me the logic please
REPORT ZFUEL LINE-SIZE 200 LINE-COUNT 75
NO STANDARD PAGE HEADING.
TABLES : equi,
equz,
imptt,
imrg,
eqkt,
iloa.
Type Declaration
TYPES: BEGIN OF ty_data ,
equnr type equnr, " Euipment no
eqktx type eqkt-eqktx, " Equipment Text
eqfnr type iloa-eqfnr, " Equipment Sort field
idate type imrg-idate, " Measuring Date
recdu type imrg-recdu, " Unit of measuring ='KM','L','H'
recdv type imrg-recdv, " Counter reading data
END OF ty_data.
TYPES: BEGIN OF ty_final,
equnr type equnr, " Equipment no
eqktx type eqkt-eqktx, " Equipment Text
eqfnr type iloa-eqfnr, " Equipment Sort field
min_date type imrg-idate, " Min Date
min_km type p decimals 2, " Max Km
max_km type p decimals 2, " Min km
t_max_min_km type i, " Total min_km-max_km
max_date type imrg-idate, " Max Date
min_hr type imrg-recdv, " Max hr
max_hr type imrg-recdv, " Min hr
t_max_min_hr type i, " Total min_hr-max_hr
min_lit type imrg-recdv, " Max lit
max_lit type imrg-recdv, " Min lit
t_max_min_lit type i, " Total min_lit-max_lit
fuel_con type p decimals 2, " Total_hrs / t_max_min_hr
km_l type p decimals 2, " km / L
lit_per_hr type i , " fuel comsumed / t_max_min_hr
END OF ty_final.
DATA: i_data TYPE TABLE OF ty_data, " internal table
wa_data TYPE ty_data, " work area
i_final TYPE TABLE OF ty_final, " internal table
wa_final TYPE ty_final. " work area
data: begin of itab occurs 0,
num type i,
end of itab.
data: v_min_1 type i,
v_max_1 type i,
min_km like imrg-recdv,
max_km like imrg-recdv,
min_l like imrg-recdv,
max_l like imrg-recdv,
max_dt like imrg-idate,
min_dt like imrg-idate,
t_ma_mi type p decimals 2,
V1 LIKE IMRG-RECDV ,
V2 LIKE IMRG-RECDV .
SELECTION-SCREEN BEGIN OF BLOCK blk WITH FRAME.
SELECTION-SCREEN BEGIN OF BLOCK blk1 WITH FRAME TITLE text-001.
SELECT-OPTIONS: p_equnr FOR equi-equnr ,"no-extension no intervals,
p_idate FOR imrg-idate. "NO-EXTENSION NO INTERVALS OBLIGATORY,
"p_recdu FOR imrg-recdu NO-EXTENSION NO INTERVALS default 'KM' OBLIGATORY.
SELECTION-SCREEN END OF BLOCK blk1.
SELECTION-SCREEN BEGIN OF BLOCK blk2 WITH FRAME TITLE text-002.
SELECTION-SCREEN END OF BLOCK blk2.
SELECTION-SCREEN END OF BLOCK blk.
TOP-OF-PAGE.
FORMAT INTENSIFIED ON.
WRITE:/1(40) ' INVESTMENT LIMITED '.
WRITE:/50(40) ' FUEL CONSUMPTION REPORT ' CENTERED ,
2 'Page', sy-pagno.
FORMAT INTENSIFIED OFF.
WRITE:/50(40) '----
' CENTERED .
FORMAT INTENSIFIED ON.
WRITE:/2 sy-datum COLOR 3, sy-uzeit .
"WRITE:/1 S903-SPMON ."p_yearf.
ULINE.
"CENTERED.
write: /2 'Date From :'.
write: /2 'Equipment No :'.
write: /2 'Unit :'.
SKIP.
ULINE.
WRITE:/1 sy-vline,
2 'EQUIP NO', 10 sy-vline,
11 'NAME', 40 sy-vline,
41 'min date', 50 sy-vline,
51 'max date', 60 sy-vline,
61 'min km', 70 sy-vline,
71 'max km' , 80 sy-vline,
81 't_max_min_km', 90 sy-vline,
91 'min hr', 100 sy-vline,
101 'max hr', 110 sy-vline,
111 't_max_min_hr' , 120 sy-vline,
121 'min lit', 130 sy-vline,
131 'max lit', 140 sy-vline,
141 't_max_min_lit', 150 sy-vline,
151 'fuel con', 160 sy-vline,
161 'km_l', 170 sy-vline,
171 'lit_per_hr', 180 sy-vline.
FORMAT COLOR 3 ON.
ULINE.
END-OF-PAGE.
START-OF-SELECTION.
select aequnr deqktx feqfnr eidate erecdu erecdv
into table i_data
from equi AS a
inner join equz as b
on aequnr = bequnr
inner join iloa as f
on biloan = filoan
inner join imptt as c
on aobjnr = cmpobj
inner join eqkt as d
on aequnr = dequnr
inner join imrg as e
on epoint = cpoint
where a~equnr in p_equnr
and
e~idate in p_idate
and
e~recdu = 'KM'.
        SORT i_data BY equnr idate descending .
        loop at i_data into wa_data.
        max_km = wa_data-recdv.
        min_km = wa_data-recdv.
    at new equnr.
        read table i_data into wa_data index sy-tabix.
        write:/ wa_data-equnr, wa_data-eqktx ,wa_data-eqfnr ,wa_data-idate ,'MAX KM',max_km EXPONENT 0 DECIMALS 2 color 7,wa_data-recdu .
    endat.
at end of equnr.
        read table i_data into wa_data index sy-tabix.
        write:/ wa_data-equnr, wa_data-eqktx ,wa_data-eqfnr ,wa_data-idate ,'MIN KM', min_km EXPONENT 0 DECIMALS 2 color 7, wa_data-recdu .
endat.
at end of equnr.
write: / '----
write: /50(80) 'Subtotal' COLOR 4 .
write:/ '----
endat.
endloop.
select aequnr deqktx feqfnr eidate erecdu erecdv
into table i_data
from equi AS a
inner join equz as b
on aequnr = bequnr
inner join iloa as f
on biloan = filoan
inner join imptt as c
on aobjnr = cmpobj
inner join eqkt as d
on aequnr = dequnr
inner join imrg as e
on epoint = cpoint
where a~equnr in p_equnr
and
e~idate in p_idate
and
e~recdu = 'L'.
        SORT i_data BY equnr idate descending .
        loop at i_data into wa_data.
        max_km = wa_data-recdv.
        min_km = wa_data-recdv.
    at new equnr.
        read table i_data into wa_data index sy-tabix.
        write:/ wa_data-equnr, wa_data-eqktx ,wa_data-eqfnr ,wa_data-idate ,'MAX LIT',max_km EXPONENT 0 DECIMALS 2 color 7,wa_data-recdu .
    endat.
at end of equnr.
        read table i_data into wa_data index sy-tabix.
        write:/ wa_data-equnr, wa_data-eqktx ,wa_data-eqfnr ,wa_data-idate ,'MIN LIT', min_km EXPONENT 0 DECIMALS 2 color 7, wa_data-recdu .
endat.
at end of equnr.
write: / '----
write: /50(80) 'Subtotal' COLOR 4 .
write:/ '----
endat.ENDLOOP.
select aequnr deqktx feqfnr eidate erecdu erecdv
into table i_data
from equi AS a
inner join equz as b
on aequnr = bequnr
inner join iloa as f
on biloan = filoan
inner join imptt as c
on aobjnr = cmpobj
inner join eqkt as d
on aequnr = dequnr
inner join imrg as e
on epoint = cpoint
where a~equnr in p_equnr
and
e~idate in p_idate
and
e~recdu = 'H'.
        SORT i_data BY equnr idate descending .
        loop at i_data into wa_data.
        max_km = wa_data-recdv.
        min_km = wa_data-recdv.
    at new equnr.
        read table i_data into wa_data index sy-tabix.
        write:/ wa_data-equnr, wa_data-eqktx ,wa_data-eqfnr ,wa_data-idate ,'MAX H',max_km EXPONENT 0 DECIMALS 2 color 7,wa_data-recdu .
    endat.
at end of equnr.
        read table i_data into wa_data index sy-tabix.
        write:/ wa_data-equnr, wa_data-eqktx ,wa_data-eqfnr ,wa_data-idate ,'MIN H', min_h EXPONENT 0 DECIMALS 2 color 7, wa_data-recdu .
endat.
at end of equnr.
write: / '----
write: /50(80) 'Subtotal' COLOR 4 .
write:/ '----
endat.
endloop.

Hi Guys
How can I split the max and min value with if condition for KM L AND H as below
I am getting the km value correctly but rest fields for L and H (lit and hours) it is not ?
Please comment.
*APPEND wa_data to i_data.
        SORT i_data BY equnr idate descending .
        loop at i_data into wa_data.
        if wa_data-recdu = 'KM'.
        max_km = wa_data-recdv.
        min_km = wa_data-recdv.
        endif.
        if wa_data-recdu ='H'.
        max_h = wa_data-recdv.
        min_h = wa_data-recdv.
        endif.
        if wa_data-recdu ='L'.
        max_l = wa_data-recdv.
        min_l = wa_data-recdv.
       endif.
    at new equnr.
        read table i_data into wa_data index sy-tabix.
        write:/ wa_data-equnr, wa_data-eqktx ,wa_data-eqfnr ,wa_data-idate ,
        'Min KM',min_km EXPONENT 0 DECIMALS 2 color 7 ,
         'Min H',min_h EXPONENT 0 DECIMALS 2 color 7 ,
          'Min L',min_l EXPONENT 0 DECIMALS 2 color 7.
    endat.
at end of equnr.
        read table i_data into wa_data index sy-tabix.
        write:/ wa_data-equnr, wa_data-eqktx ,wa_data-eqfnr ,wa_data-idate ,
        'Max KM', max_km EXPONENT 0 DECIMALS 2 color 7,
        'Max H', max_h EXPONENT 0 DECIMALS 2 color 7,
        'Max L', max_l EXPONENT 0 DECIMALS 2 color 7.
endat.
regards
Piroz

XY Graph-Setting Y-Scale visible to False still Shows Corresponding Y scale Max and Min

Hi Guys,
I use XY graph to display the data with 3 Y-scales.
When I set any Y scale Visiblity property to False,its still display the Y scale Max and Min range Lines in plot area of the Graph and making cross line or extra parralel line with other visible scales.
Attached the screen shot for ref.
And I know the cross line may be due to different Y scales range setting.But XY graph should not display the invisible Y scales and its property as well.
please provide your suggestions to avoid that.
Solved!
Go to Solution.

The scales and the lines associated with those scales are separate properties. I have never tried it, and right now I am not at a computer, but there should be properties for setting the grid line colors. Set them to transparent.
Mike...
Certified Professional Instructor
Certified LabVIEW Architect
LabVIEW Champion
"... after all, He's not a tame lion..."
Be thinking ahead and mark your dance card for NI Week 2015 now: TS 6139 - Object Oriented First Steps

BEx Variables - Customer Exit - Find Max and Min of two values

Similar Messages

Maybe you are looking for