BEx Wad 7.0 displays key instead of text when text value is blank

Hi,
I have a query which behaves differently in BEx Analyzer and in a Web Template. I have a characteristic which is set to display text and key. The key is "100" and the text field is not filled out in the text table of the characteristic for key value "100".
In BEx Analyzer, the text field shows a blank value. However, in WAD the text field displays the key which is "100". I need to display the text field as blank in WAD, but it seems like this is not possible. Do you know a way to achieve this?
I need to export to Excel from WAD, so I guess javascript will not be a proper solution.
Thanks!
Best regards,
Morten

Hi Angie,
There is no way to change it by way of system settings...

Similar Messages

  • I get the "s" instead of "a" when texting. Why doesn't auto correct catch this

    I get the "s" instead of "a" when texting. Why doesn't auto correct catch this?

    Because there's no error in a single letter. Learn how to type.

  • Display Key instead of Text in filter value

    In BEx excel query, filter is displayed as text instead of key. I've changed the ojects properties to display as Key, but still displays text in query. Is there a way to change this??

    Hi Angie,
    There is no way to change it by way of system settings...

  • Workbook refresh displays key instead of text

    Hi,
    We are on NW2004S rampup. Our support pack level for Quality environment is 7. When we execute the workbook in management cockpit in transaction UMM_PRES, the calendar month is displayed as text. When we refresh workbooks, the calendar month changes from text to key., like from Jan 2006 - May 2006 to 01/2006 - 05/2006. This happens for every refresh. On the other hand when we log back and display, text is shown and with every subsequent refresh key is displayed. This does not happen in Quality system under 3.0b version. My search on OSS notes does not get any relevant  one. Anyone having similar experience?
    Thanks.
    Param

    Hi David,
    I am able to get the result as text only after each refresh. This is made possible as follows:
    In RSD1, I changed the following under BEX tab.
    Display  changed to Text
    Text type changed to medium type
    The Text type is  new one in 2004S as compared to 3.x.
    Tnx.
    Param

  • Bex report does not display key figures

    Friends,
    Need help urgently.
    We have a report of a multicube(MC1). key figures of one of the infocube(IC1) in the multicube(MC1) does not showup on the report.
    If reported independly on that IC1 it does show all values. This sounds really weird but its taking up all my time.
    Please friends, need your inputs on what else could have gone wrong.
    FYI...earlier we had same problem but creating new report on this multicube resolved problem. But this time, we have a new KF added to the infocube(IC1). But no change to the reports are made. Even though problem occurs.  I even transported all the rules, multicube and infocube.
    Please help me identify what could be the cause for it.
    -Raj

    Gupta,
    Thanks, this resolved my problem.
    But here;s another issue that came up now.
    I have a keyfigure (conversion factoor to EA) as attribute to master data infoobject (zmatnr). I have this included in the multicube. On the query, I have created a replacement path variable for conv. factor and this works well with all reports except this sales report which has key figures included from multicube(from multiple infocubes in muticube. Any idea what is that i am doing wrong?
    thanks

  • ITunes displaying garbage instead of Japanese when importing from file and.

    not a CD. How can I correct that? Changing the ID tag doesn't help. Is there a script or app that would correct it? The OS displays it correctly when listed from the finder.
    iTunes is great, but it needs to be more language friendly. TIA!!!

    not a CD. How can I correct that? Changing the ID tag
    doesn't help. Is there a script or app that would
    correct it? The OS displays it correctly when listed
    from the finder.
    Sorry, the only way to fix this is to get your ID3 tags correct. Nothing wrong with iTunes. See this note for some info and a couple apps that may help:
    http://homepage.mac.com/thgewecke/mlingos9.html#itunes

  • Display pattern for DateTimeField ignored when setting value from script

    Hello,
    I have a DateTimeField with Data pattern date{DD.MM.YYYY} and Display pattern date{MMMM}, so it displays its default value "21.05.2011" as "May". Now I'm setting its value from the other field's initialize event:
    if (this.rawValue) {
        data.Subform_Footer2.DateTimeField1.rawValue = this.rawValue.match(/\d+\.\d+\.\d+/)[0];
    Assuming this.rawValue contains text "21.04.2011", the DateTimeField displays "21.04.2011" in preview instead of "April" as specified in Display pattern.

    Hi,
    To me it looks like you are passing a string to the date field, rather than a date.
    Instead of trying to abstract the month manually in the script, why not pass the whole date through "21.04.2011" and leave the display pattern display the month.
    Niall

  • In BeX only Key is display instead of Text in filter value

    Hi,
    Our company migrated from BW 3.0b to BI 7.0 Netweaver 2004s recently.
    Before the migration, a value in the Filtersection of an executed query in the BEx Analyzer was displayed as text. Now after the migration it always displays the key instead of text.
    If i put the same InfoObject in the Free Characteristics than it shows text like i choosed in the display section of the properties.
    Do you have any clue why?
    Thanks
    Ralph

    Wht FEP are you on??
    Try to be on the latest SP available as a part of sanity check.
    Try first to download latest FEP from service.sap.com/swdc
    Download>Support Packages and Patches">SAP Frontend Components">SAP GUI FOR WINDOWS">SAP GUI FOR WINDOWS 6.40>Win32>Bw700SP09P_904-10001615.exe.exe
    download that file rename as .exe and execute it.
    Hope it Helps
    Chetan
    @CP..

  • How to Add a New Filter Value in BEx WAD to Display All Result

    Hi experts,
    I want to add a new filter value in BEx WAD to display all data records. The scenario is as follows:
    The status field can have two values: Active ("A) and Inactive ("I").
    But the requirement is to have a third value to display all the data records (Active + Inactive). E.g. the value can be "G". The purpose is to increase the understandability for report users.
    Does anyone have an idea?
    Regards,
    Joon

    Hi Vineet,
    thanks for your reply. The problem is that there are only 2 values available for this Characteristic: "A" or "I".
    The requirement is to have a third value "G" (instead of the default "All Value") due to historical reason, because all future report users have been working with R/3 reports for quite some time and they are accustomed to using "G" for displaying all values.
    Is there any possibility to realize this?
    Thanks,
    Joon

  • Query Designer&WAD: Variable search help - Display Key/Text button

    Good day.
    Please, can you write me some solution of my problem.
    I have the character with hierarchy.
    In tab "Business Explorer" of character set display as "Text".
    When i run my query on SAP Portal and enter to search help of character, it is displays text of my ZCHARACTER(not key and text). But name of levels(0HIER_BODE) display key and text... (NODENAME and TEXT).
    When i run query in BEx Analyzer, in search help all correct. My ZCHARACTER and 0HIER_NODE displays only text.
    When i press tech button "Display Key/Text", a see marked "Text". I cannot find the same button when run search help in Query Designer, WAD(or Portal).
    How can i display only texts of 0HIER_NODE? But no [Key] Text.
    Thank you for answer.
    Regards
    Update. Can be usefull:
    View table RSDVDPA with key DPNAM='0HIER_NODE' consist field CHAPRSNT with value = '0' (Key and Text).
    When i change value of table
    UPDATE RSDDPA SET CHAPRSNT = '4'
      WHERE DPANM   EQ '0HIER_NODE'
        AND objvers EQ 'A'.
    All works correct!
    Change this value directly not correct. I think, that it is change of value of parent character. But when?

    I have created own 0HIER_NODE character - ZNODENAME.
    Only root node infoobject is 0HIER_NODE. All another - Z.
    Thanks! ^)

  • Display key and text by WAD command in custom structure hierarchy

    Hi everybody,
    I have a query using a custom structure with hierarchy layout. As usual the structure does only display its text as descriptions but I can enable the display the key in BEx Web by right-click on the analysis item --> Properties --> Characteristic --> Display. Unfortunately these setting can not be defined directly in the structure within the Query Designer.
    For a workaround I put the query into a web template, in which I used the Set Presentation (SET_PRESENTATION) command to enable key and text display from the start. Hence I put that command in the wem template parameters Action Before First Rendering (ACTION_BEFORE_FIRST_RENDERING). Everything is working properly and makes me very happy.
    But... there is one thing missing, I would like to implement... I want a toggle button, which allows the user to switch between key and text display and text display. Unfortunately setting the same command from Action Before First Rendering (ACTION_BEFORE_FIRST_RENDERING on a various button does not working. The button command only affects data rows of the leaves of the structure hierarchy. All parent nodes do not change their appearance.
    Any ideas how to solve this?
    Thank you for any helps and comments!
    Sebastian

    Hi Sebastian,
    I have a similar problem. Can you help me? How did you set the entry in Member Presentation of Command SET_PRESENTATION to display key and text? I just found the values to set the only text or only key.
    best regards,
    Barbara

  • BEX WAD 7.0:  Chart Takes Long Time to Display in Portal - Query runs FAST

    I have a BEx WAD 7.0 template which contains 3 column charts (each with it's own seperate DataProvider/Query).  When the page loads...two of the charts show up right away, but one of them takes almost a minute to display on the screen (I thought it was missing at first).
    I ran all three queries in the BEx Query Analyzer (including the one for the chart that takes forever to load) and they all complete within 3 seconds of hitting "Execute."  So I don't believe it is the query causing this issue.
    The chart that doesn't show up right away does have more data to display than the other two...but I have queries/charts on other web templates that contain 3-times the data of this one and show up fine when executed in the portal.
    Anyone else having this issue or have an idea on how I can optimize the WAD charts and/or find out what is causing this issue?  Again...the query that fuels this chart completes its execution in about 3-4 seconds.
    Thank you for your time and of course points will be assigned accordingly.
    Kevin

    Hi,
    have you already checked how much time the IGS consumes when creating the charts?
    Run TA SIGS and check the statistics values.
    Regards, Kai

  • Subject: Displaying key figures without currency unit in BEX reports

    Hello,
    Is it possible to display key figures without currency unit in BEx reports? For example; Material Costs 1000 EUR
    should be shown as 1000. Currency unit EUR and also scaling factor (*1000 EUR) does not interest us.
    When we use display options in query properties, we just see an option of displaying key figures with/without scaling factors, which does not solve our problem.
    Thanks for your reply.
    Regards,
    Nuran Adal

    Hi Eugene,
    thank you very much for your quick reply. We have very detailed reports with min. 10 columns, I should have defined 10 more formula columns to realize this (NODIM), but anyway there is no other way to do this, am I right?
    Best Regards,
    Nuran

  • When i hold down a key instead of repeating it displays special characters

    When i hold down a key instead of repeating it displays special characters, can anyone helpma resolve this issue, or is it something i cannot change?

    False gets replaced by True
    In terminal copy and paste:
    defaults  write -g ApplePressAndHoldEnabled -bool true
    Restart your Mac

  • Change comma and period in key figure presentation in BEx WAD reports

    Hi gurus
    We run our BEx WAD reports in the SAP portal. By default the thousands separator is period and the decimal separator is comma. How can I change this so the period becomes the decimal separator and the comma becomes the thousands separator?
    Kind regards
    Erik

    Hi Erik,
    you can change this by setting at user parameters.
    At system, at any screen (RSA1) -> menu SYSTEM- > USER PROFILE -> OWN DATA ->  Defaults Tab, here you can change.
    and Save.
    these will reflect in WAD report output.
    Best Regards.

Maybe you are looking for