BEX WAD 7.0 Tab Pages issue with Mandatory Variables

Hello,
I have developed a BEX WAD 7.0 Tab Pages and need to pass Mandatory variables from one tab to other tab. Each tab has Container Layout Item to group them into a tab.
I have Set the Variable Sate for each tab page generically and it passes the variables if all of them are optional variables. If one of them is Mandatory the doesn't pass the value for the variable.
Did anybody face this problem & We are on SAPKW70018? If there are not note specifically for this on higher SP please do let me know.
Thanks
Arun

I guess there are no experts in BEX WAD 7.0 in SDN to answer this question.
Thanks
Arun

Similar Messages

BW 3.5 - Issue with formula variable with replacement path

Dear experts,
I'm facing an issue with formula variable with replacement path.
Just to clarify, I know replacement paths is raising a lot of questions but I've been using this functionnality extensively in the past, both in 7.0 and 3.5, so I'm not looking for basic information about how to use it.
I'm trying to setup a simple report that would show total values per plant of Purchase Order < 100
To do so I've setup a calculated key figure as follow:
VAR1 * ("PO value" < 100 ) * "PO value"
VAR1 is a formula variable with replacement path on 'purchase order' and value attribute 'constant =1'.
(The report has to show values summarized by plant but should not show the detail PO by PO, so I'm not looking at a solution based on condition)
The report as characteristic "plant" in rows and my CKF in columns.
Now let's take an example. I have 3 POs in Plant 1:
PO1 -> 150
PO2 -> 90
PO3 -> 80
Because of the variable with replacement path, the result in my query should be:
plant1 = 170 (even though characteristic "purchase order" is not in my rows, system should evaluate PO one by one and return values only for those two that are below 100).
But the result coming is 320, which is wrong.
I've done the same report on many other 3.5 systems and it worked perfectly, and I am not able to get proper support from SAP OSS who keep saying that this functionnality is not ready in 3.5 (although I've provided screenshot of this working on another 3.5 system!!! how frustrating...)
They have also pointed to problems of Before and After aggregation but that has absolutely no impact. Once again, the scenario is working perfectly on other 3.5 systems with the same query design, so i'm sure it has nothing to do with Query Designer options.
Would anyone have ever come to an equivalenet problem? I'm wondering whether the DB itself could not play a role in the variable with ref characteristic 'constant =1' ...
Any though is welcome!
thanks

Hi,
The text variable is replaced when the exact date is clear for this key figure column according to the restriction.
To achive this, please make sure that either the variable is directly restricted in the key figure selection, or that the date characteristic is in drilldown.
Regards,
Patricia

Issue with Default Variable in WAD after Java Patch 7.01.7.31

Hello all,
I'm running into an issue with the Web Application Designer Template execution for a particular default variable. This started occuring after Java Patch 7.01.7.31 we had implented over the weekend.
The issue is when Executing the WAD Template, we have a selection screen with a variable with default values assigned to it. When leaving the default values and hitting Ok to execute through the screen does not register and stays as is and I get a message at the top with the following: Characteristic Prob % Number has no master data for "1.00" or you do not have authorization.
This only seems to occur for this default variable on info object Prob % Number, the other default variables seem to work fine. Also another note when clearing out the values it returns data and executes through. The value 1.00 is also a valid value in the cube and also in the output display. If we run this report in the BEx analyzer, the selection screen executes through with the default variable perfectly fine, this is only an issue with the Web Application Designer Template.
Has anyone ran into this? I've searched and have not found any notes as of yet.
Thank you,
-Andy

Dear Andy,
Please raise this to SAP, seems like a strange problem this needs to be addressed by OSS note only.
Close this thread once you get a solution.
Regards.
Den

Tab Ruler Issues with CS4

Hi. I am having trouble with the tab ruler in CS4. Whenever I zoom in to the long text box I need to set tabs in, the box is 44" long, the tab ruler does not stay with the text box if zoomed in more that 100%. Even when I have the ruler 'locked' to the text box I am setting tabs in, it fails to stay with the box. I scroll the the right to see the rest of the text box but the tab ruler does not move. Am I doing anything wrong or is this something funky with InDesign? I basically need the tabs to space a bunch of UPC codes across the length of the text box. It's usless if the tab ruler does not stay with the text box - I have no way of knwing where to set the tabs. Thanks.
Pat

Thanks for the info. Yea, I figured it was a separate window and playing with it for a few hours trying to figure this out. So how do you keep the tabs and tab ruler inline with the text box when you scroll to the left or right or zoom in and out? It seems to not snap to the box when zoomed in either. Very hit or miss with it even aligning to the text box. The tab ruler goes way off the page and I have to scroll just to try to get the icon to try to snap it to the text box. Works about 20% of the time, but when I scroll it's useless.
I might be able to use tables, but I won't have the control, I don't think. Basically I have either 17, 10, etc. UPC codes and text below it, to fit at different increments along a 24 or 44" long page. This will change all the time, depending on how big or small the article that the UPC represents is. So I have nested a EPS UPC code and a text box below it and pasted it into a text box. From that I change, add or subtract, them to get the amount of info I need per long text box or line. I figured it was easier to do it this way than to align the EPS and the text by itself each time a change is made, which is all the time.
Long story short - I have dozens of these files that people did in Freehand and it takes most of the day to fix or add to these files the way it is now. Each UPC code is placed/linked, and the text is by itself in a table below. So I am moving each by hand. Thought InDesign would be better. The size of these change a few times a month. Thanks.
Pat

Tab Page Issues

Hai All,
In my form i have currently 4 tab pages the records displayed as mullti records block. I need to display item values from one tab page to another tab page. Say for example i have two columns in 3rd tab page( one is text time and other is display item). I want to display all the two items in 4th tab page as display items showing all item values from previous tab page.
What exactly happens now to me is that if i keep my cursor at first record in 3rd tab page it shows only one record in 4th tab page.Instead it has to show me all records from 3rd tab page to 4th Tab page. I have enabled copy value from item in the property pallete for respective items..
Urgent Help is required
Bal

If the contents of the tab pages are all in the same block then use "Synchronize with Item"
Copy Value is intended for Cross Block copying and only relates to the current record, which is why you only see one of them.

Issue With OLAP Variable

HI all,
we have an issue with the OLAP variable. One of the SAP olap variable(0P-perf1) is processed as Authorisation. where it should be sap exit. When we try to change at the BEx analyzer it was in disabled status.
My question here are :
1) How we can change the processing type?

Hi,
Pls refer link
creation of OLAP Variable
http://help.sap.com/saphelp_nw04/helpdata/en/f1/0a55ece09411d2acb90000e829fbfe/frameset.htm
It may help you.
Thanks
Edited by: npathak on Aug 4, 2010 4:09 PM

Issues with Shared Variables in Systems Running for Extended Periods of Time

I am designing a large SCADA system using LabVIEW DSC and cRIOs. My plan is to use shared variables to communicate the majority of the information across my network (much like "tags" in a normal SCADA system).
I'm wondering if anyone has experienced issues (connection failures, etc...) with shared variables running on systems for months (both real-time and windows based PCs) without the cRIO or PC being restarted/redeploying the variables. What is the stability of the Shared Variable Engine over extended periods of time?
Thank you for the input.
--CLD--
LV 6.1, 8.6.1, 2011 SP1, 2012 SP1

I have a system with 2 cRIO's each with Ethercat extension chassis. Each cRIO hosts ~100 NSV's and is running the scan engine at 40 Hz.
Each cRIO is coupled to a HMI that has front panel control bindings to NSV's hosted on the cRIO as well as a windows hosted mirror library (used for citadel db logging) that is also bound to the cRIO NSV library. The cRIO's have monay months of contiguous run time without reboot and I closely monitor cpu and memory usage and also rt performance metrics and will log faults if there are any such events. I also use NSV's for messaging from the HMI to the cRIO for such things as setting zero offset values and deploying configuration parameters. My overall findings are that the SV engine and the PSP are stable and efficient (especially NSV<->NSV and NSV<->HMI binding)

Issue with declaring variable

I am developing a multiuser application in flash, using smartfox server and as 2.0, but i am having an issue with defining/declaring a variable/object/array, and then accessing it. I am attempting to define "curMap" (whether it be a variable, array, object, whatever works) within the following function, as the returned array from the server, "resObj". This works fine as long as i only call up "curMap" WITHIN this function(as you see in the line : r_txt.text = curMap;) however whenever I try to call up "curMap" on the frame coding, outside the function, it comes back as undefined, or typically nothing. Any Ideas as to how to properly do/assign this? I have tried various things(such as _root., _global, or defining the var "curMap" outside the function) with no luck.
Here is my Code:
smartfox.onExtensionResponse = function(resObj:Object, type:String)
        if (type == "xml")
                if (resObj._cmd == "getMap")
                    curMap = resObj.db[0];
                    r_txt.text = curMap;
                }else if (resObj._cmd == "getSurr"){
                 surrMap = resObj.db;
                 b_txt.text = surrMap[0];
thanks

ahhh! yup that fixes it, thanks!

Issue with substitution variable with @MDSHIFT in BR in Calc Manager

Hi Experts,
We have a BR in EAS which is working fine.
and exported to Calcmanager, now while validation it is giving error "@BaseScenario" is not found.
the code is
@MDSHIFT("LFLSalesIncVAT_GBP_C_DHP"->&BaseScenario->"Final"->"CD_FinalPlanPL",-1,"Year",,1,"Period",);
if i hard code it like @MDSHIFT("LFLSalesIncVAT_GBP_C_DHP"->"P7PP"->"Final"->"CD_FinalPlanPL",-1,"Year",,1,"Period",); working fine.
is there any limitation with calc manger and substitution variables?
Thanks
GP

There seems to be many issues with validations in calc manager, does the rule run if you dont validate.
Cheers
John
http://john-goodwin.blogspot.com/

Terminal issues with environmental variables

I am having an issue with persisting environmental variables during a session. I am running an app that requires the sequential running of 3 scripts setenv.sh, build.sh, run.sh.
The first script sets variables that are being used by the other scripts. The script just contains lines like
"export ADVISOR_HOME=/Applications/Blaze/Advisor65;"
if i add echo the variables name in the script they are set, but immediately after or with env they are gone.
From my understanding (not much) these should persist as long as the window is open. Is there any setting that is being set in OS X that is sandboxing scripts? It would seem to be security-minded but is causing problems.
Also is there any way to temporarily disable the requirement to prefix a command call with ./ in os x. Many of the included scripts are calling methods in the same directory and I am having to alter a lot of scripts to include ./
Thanks in advance,
walter

walter deane wrote:
I am having an issue with persisting environmental variables during a session. I am running an app that requires the sequential running of 3 scripts setenv.sh, build.sh, run.sh.
The first script sets variables that are being used by the other scripts. The script just contains lines like
"export ADVISOR_HOME=/Applications/Blaze/Advisor65;"
if i add echo the variables name in the script they are set, but immediately after or with env they are gone.
Do you mean you echo them from within the script and then they are gone after the script ends? That would be normal. If you want them to persist through the other scripts, you could combine the scripts. The problem is that you're setting them in one process and expecting them to persist in another process. Unless the second is a child of the first, that won't work. I think it would work if you executed the second two scripts from within the first script because they would then be children of the first process. Does that make sense? I'm not sure of the correct terminology here and I can't draw a tree which is what I want to do! Another option might be to source setenv.sh rather than running it (i.e. wouldn't need to be executable) - the same way the shell does when starting up, I think.
From my understanding (not much) these should persist as long as the window is open.
I don't think it has anything to do with windows. It is just when the process exits. If you set such variables at the command line, they'll persist until the window closes because they'll persist until the process exits which is usually when the window closes. At least, in the simplest cases. But it isn't the window staying open or not that's important. It's that everything else done in the window happens to inherit the environment from the parent process. In truth, this often isn't the case anyway, but I expect that's the source of the misunderstanding.
Is there any setting that is being set in OS X that is sandboxing scripts? It would seem to be security-minded but is causing problems.
Nothing special that I know of. There is stuff for something like this in Leopard but you'd have to enable it and I'm not sure it applies here.
Also is there any way to temporarily disable the requirement to prefix a command call with ./ in os x. Many of the included scripts are calling methods in the same directory and I am having to alter a lot of scripts to include ./
You can do this but it is extremely insecure. Essentially, you can add the current directory to PATH. (PATH=$PATH:./; export PATH) It would be much, much better - much, much safer - to edit the scripts. Can you not use sed to edit them? If there is some sort of pattern, there's no need to do it by hand.
If this is an application you plan to share, you should certainly not consider changing PATH in this way unless you are aiming to produce an application with maximum destructive potential! If you don't plan to share, of course, it is your call!
- cfr

Issue with presentation variables, dashboard prompt and filter

Dear Guru's,
I have a question about constraining a request with presentation variable set by a dashboard prompt. I have a dashboard prompt, that stores its value in a presentation variable . The prompt is about region. When the dashboard opens, the default of the prompt is all choices and it needs to show my reports with "All Choices". I've created the following filter on my two reports on the dashboard:
"Dim Student"."Region" = '@{variables.GILLES}'
or '@{variables.GILLES}' IS NULL
One report is just the column "Dim Student"."Region" (to see if it works) and with this report the above filter works just fine. When nothing is prompted it shows "All Choices" when a choice is made the report responds accordingly.
BUT
The second report on my dash with the same region column, but extended with some time dimension columns and a measure gives an error which I'm not able to solve.
+State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 14023] None of the fact sources for ToDate(# Feitelijke Instroom:[DAggr(Feit Instroom en Uitstroom Opleidingen.# Feitelijke Instroom by [ Dim Tijd.Maand Omschrijving, Dim Tijd.Maand Nummer, Dim Tijd.Jaar, Dim Kwalificatie.Kwalificatie Niveau, Dim Leerling.RCBREGIO Regio] )], [Level JAAR]) are compatible with the detail filter [Dim Tijd.Maand Nummer = 3, Dim Tijd.Jaar = 2010].+
+(HY000)SQL Issued: SELECT "Dim Tijd".Jaar saw_0, "Dim Tijd"."Maand Nummer" saw_1, "Dim Tijd"."Maand Omschrijving" saw_2, "Dim Kwalificatie"."Kwalificatie Niveau" saw_3, "Dim Leerling"."RCBREGIO Regio" saw_4, "Feit Instroom en Uitstroom Opleidingen"."# Feitelijke Instroom Cumulatief" saw_5, REPORT_SUM(saw_5 BY saw_0, saw_1, saw_2) FROM repos_x WHERE ("Dim Tijd".Jaar = 2010) AND ("Dim Tijd"."Maand Nummer" = 3) AND (("Dim Leerling"."RCBREGIO Regio" = 'Noord-Oost') OR ('Noord-Oost' IS NULL)) ORDER BY saw_0, saw_1, saw_2, saw_3, saw_4+
While the exact same report but without the "or '@{variables.GILLES}' IS NULL" doesn't throw any errors but doesn't show the "all choices" by default.
The ultimate goal to achieve is to build a dashboard with several reports from several subject areas with one single prompt that opens default with "all choices" and constrains the reports accordingly.
Any help is highly appreciated.
Kind Regards,
Gilles

Phani,
I know "All Choices" is a special value and that it doesn't represent NULL. My filter construction seems to work fine.
My filter condition:
"Dim Student"."Region" = '@{variables.GILLES}'
or '@{variables.GILLES}' IS NULL
When it's set by the prompt it filters the request accordingly (first condition evaluates to true), when it's not set the second condition evaluates to true and shows all the results (or it's not filtered).
The problem is that it doesn't work when time dimensions are combined with this filter. Then it throws the error mentioned in the first post.
By the way: your suggested solution doesn't work.

CS5 issues with mandatory roaming profiles

Hi,
I have seen lots of problems reported with using CS5 on networks with mandatory roaming profiles but not found any answers yet?
Has anyone managed to get it working yet?
We have gone to using standard network default profiles but it is not where we really want to be.
Regards
Darren

Dreamweaver is designed to work in a multi-user environment, and it creates a configuration folder for each user in that person's application data folder or library. You need to contact Adobe technical support if you need a different setup.

Error when opening a workbook with mandatory variables

BEx analyzer displays an error message window in the same time as the variable popup window.
The worbook is linked to 1 query that uses 2 mandatory variables (month ?, year ?), and was defined in the test system.
I assume that values are thus saved within the workbbok.
The developper had 0bi_all autorisation.
When a reporting user is opening it (also in the test system), the error message is displayed.
This happens only the 1st time when Analyzer is started, and by clicking on the OK button, we are able to run the query.
The next workbook refresh runs without the error message display.
Question = does anybody know the reason of this, and how to avoid the error message ?
more infos:
error message E019(R9E) appears for each variable (thus, 2 time with a query with 2 variables):
Help type 5 is not valid for the platform NONE
Exception 5 occured while calling IWB_HTML_HELP_URL_GET
the details of this error message is:
Diagnosis
   You tried to start the online help with help type on platform. Help type is not supported on this platform.
System Response
   Profile parameter eu/iwb/help_type must contain a valid help type.
Diagnosis
   The documentation is not correctly connected to the BI server.
System Response
   The documentation cannot be displayed.

i checked the query and authorisation with RSRV, but this didn't help, furthermore, a lot a functions are not implemented in the system, sorry.
i also changed the query and workbook, and i think that it depends on the workbook release 3.x or 7.
imagine following situations: same query 7.0, same workbook 7.0
with BI7
1) opening the query with variables doesn't display the error message
2) refreshing the workbook with the query with variables displays the error message (only for a non mandatory variable - as soon as there is a variable, the error message is displayed)
3) refreshing the workbook with the query without variables doesn't display the error message
with BW 3.x
4) refreshing a new workbook 3.x with the query with variables doesn't display the error message
i also investigate in the function modules for workbooks (RS...), but nothing helped.
i still think that it is linked to authorisations, because with sap_all, the message isn't displayed.
how can i continue ?
Edited by: Claire Mignerey on Mar 17, 2009 2:37 PM

Dynamic Tabs Shell : issue with taskflows using pages

Hi,
We use the Dynamic tabs shell page template in our application.
It works fine when used with taskflows with page fragments.
However it errors when trying to render a taskflow with pages instead of fragments as:
<FormRenderer><encodeAll> Multiple forms detected on viewId: /starter. Rich client currently has some limitations in dealing with multiple forms.
<Jul 27, 2010 9:42:23 PM IST> <Error> <HTTP> <BEA-101020> <[ServletContext@32152418[app:calcmgr module:calcmgr path:/calcmgr spec-version:2.5]] Servlet failed with Exception
java.lang.NullPointerException
     at oracle.adfinternal.view.faces.renderkit.rich.FormRenderer.encodeAll(FormRenderer.java:233)
     at oracle.adf.view.rich.render.RichRenderer.encodeAll(RichRenderer.java:1369)
     at org.apache.myfaces.trinidad.render.CoreRenderer.encodeEnd(CoreRenderer.java:335)
     at org.apache.myfaces.trinidad.component.UIXComponentBase.encodeEnd(UIXComponentBase.java:765)
     at org.apache.myfaces.trinidad.render.CoreRenderer.encodeChild(CoreRenderer.java:415)
     at oracle.adf.view.rich.render.RichRenderer.encodeChild(RichRenderer.java:2567)
     at org.apache.myfaces.trinidad.render.CoreRenderer.encodeAllChildren(CoreRenderer.java:432)
     at oracle.adfinternal.view.faces.renderkit.rich.DocumentRenderer.encodeAll(DocumentRenderer.java:1071)
     at oracle.adf.view.rich.render.RichRenderer.encodeAll(RichRenderer.java:1369)
     at org.apache.myfaces.trinidad.render.CoreRenderer.encodeEnd(CoreRenderer.java:335)
     at org.apache.myfaces.trinidad.component.UIXComponentBase.encodeEnd(UIXComponentBase.java:765)
     at org.apache.myfaces.trinidad.component.UIXComponentBase.__encodeRecursive(UIXComponentBase.java:1515)
     at org.apache.myfaces.trinidad.component.UIXComponentBase.encodeAll(UIXComponentBase.java:785)
     at javax.faces.component.UIComponent.encodeAll(UIComponent.java:942)
     at com.sun.faces.application.ViewHandlerImpl.doRenderView(ViewHandlerImpl.java:271)
     at com.sun.faces.application.ViewHandlerImpl.renderView(ViewHandlerImpl.java:202)
     at javax.faces.application.ViewHandlerWrapper.renderView(ViewHandlerWrapper.java:189)
     at org.apache.myfaces.trinidadinternal.application.ViewHandlerImpl.renderView(ViewHandlerImpl.java:193)
     at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._renderResponse(LifecycleImpl.java:710)
     at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._executePhase(LifecycleImpl.java:273)
     at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl.render(LifecycleImpl.java:205)
     at javax.faces.webapp.FacesServlet.service(FacesServlet.java:266)
     at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
     at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
     at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300)
     at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.adf.model.servlet.ADFBindingFilter.doFilter(ADFBindingFilter.java:191)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.adfinternal.view.faces.webapp.rich.RegistrationFilter.doFilter(RegistrationFilter.java:97)
     at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:420)
     at oracle.adfinternal.view.faces.activedata.AdsFilter.doFilter(AdsFilter.java:60)
     at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:420)
     at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl._doFilterImpl(TrinidadFilterImpl.java:247)
     at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl.doFilter(TrinidadFilterImpl.java:157)
     at org.apache.myfaces.trinidad.webapp.TrinidadFilter.doFilter(TrinidadFilter.java:92)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.adf.library.webapp.LibraryFilter.doFilter(LibraryFilter.java:159)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.dms.wls.DMSServletFilter.doFilter(DMSServletFilter.java:330)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.doIt(WebAppServletContext.java:3684)
     at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3650)
     at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
     at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
     at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2268)
     at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2174)
     at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1446)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
Is this a known issue or constaint with Dynamic Tabs Shell page template?

Actually I don't think the answer is as clear cut as the dynamic tab shell template (aka. UI Shell) doesn't support task flow with pages, as, we have an application that uses it that calls out to a BTF using pages and it works fine. The catch is that BTF itself doesn't use the UI Shell. So it really depends what you mean.
Can you be more specific what you're attempting to achieve? Are you trying in one page that uses the UI Shell, to embed a BTF in a region where the BTF uses pages rather than page fragments? Or, do you simple want lots of pages in your overall applications unbounded task flow to include the UI Shell template? As Alex has asked, we don't really have information of what you're trying to put in what at this stage.
For the record, the better forum to ask such questions about the dynamic tab shell template is the ADF UI Patterns & Best Practices OTN forum:
ADF UI Patterns & Best Practices
...however given you've started this thread here, you might as well continue.
CM.

Issue with ovi support page. issue with bought app...

first if all i cannot fill inn support form just becasue when im choosing issue tipe page is redirecting and i cant chose the issue tipe! email on [email protected] is also fails
i ve got some problems with ovi store. some apps which were bought while ago (they are showed in my content bookmark in phone ovi store), but when i try to redonload them it tells me that i must buy them again! i ve got all confirmation emails with numbers of my apps.
strangeness lies in the fact that all the apps which i try to redownload are newer versions than i had. but i repeat ALL this apps are showed in my content, and they were bought by me.

Have the same problem.
reset my phone and now i can't download previously bought apps

BEX WAD 7.0 Tab Pages issue with Mandatory Variables

Similar Messages

Maybe you are looking for