Bex Web Ad-hoc Analysis Template - Displaying both Data and Graph Tabs

Hello Everyone
I am asking this as I would not have belived this if I hadn't seen it for myself. I was showing somone a BW report using the standard Bex Ad-hoc analysis on the Web. They managed to display both the data analysis tab and the Graphical display tab on the same page, with the data at the top and the graph underneath. I could see that both of the tabs were highlighted at the top. It was great because as you manipulated the data in the navigation block, the graph changed at the same time.
I have looked in all my documentation and I have not found anything.
I have tried to replicate what this user did, but cannot. I have tried all the usual things like Shift control and alt, but it doesn't work.
Does anyone know how to do this, because the user loves it and I cannot explain to them how they must have done it!
Points will be awarded for the successful answer!!
Many thanks to you all
Gareth

Thanks Andrew
I am glad you understand what I mean, as I thought I was seeing things when I saw it!
I feel I am so close to the answer, but when I do the drop down on the Graphical display tab for "display as" it only gives me the options
Column Chart
Line Chart
Pie Chart
Bar Chart
Stacked Bar Chart
Do I need to do something else, or I am I in the wrong part of the report and I am running BW 3.5.
Thanks for your reply so far
Gareth

Similar Messages

Should display both Spanish and English lang. at a time in BEx analyzer

Hi All,
I need to display both Spanish and English lang. in Bex analyzer.
InfoObject is language dependent.
Ex: For material it should display description in Spanish and English at a time.
Am only able to display one at a time.
Please suggest.
Regards,
Sandeep.

Hi Sandeep,
As Kodandapani mentioned it’s not possible to display both languages same
time as its mapping to same T table where LANGU is part of key.
I recommend you to create an attribute or maintain another table for other
language to display at a time.
if anybody get any better ideas then pl share.
Regards,
Naveen Kencha

When will Smartview support display both aliases and members?

In the Essbase classic add-in, users had the ability to display both aliases and member names. When using Smartview with Essbase, this isn't supported. Are there plans to add this back? Thanks.

I heard this is the most requested parity feature of the addin, that Oracle may be doing this sometime in 2010 since it is a complicated fix.

Is there a way to display the date and time on my officejet 6500

HP Officejet 6500a Plus Windows XP_ Is there a way to display the date and time on the display of my printer

Are you referring to the Date and Time some cameras put right on the image? If so there is nothing really good in iPhoto to do this. You could try the Retouch tool and see how that looks but I think you will need something more precise and powerful, like the clone tool in Aperture.
Also something like PhotoShop or GIMP - The GNU Image Manipulation Program (free) should do what you want also.
If your asking about some other date post back.
regards

Camileo S20 - How to display the date and time

Hi, to all. I have got as Christmas present the Camileo S20 and I am not able to display the date and time at video. In manual is no mention about this, just how to set the correct date and time. But what is intention of setting the date and time into camera, if it is not possible to display them on video ?

Hi,
of course, I did it repeatly, it is written in my question above. I am not stupid.
This question is aimed to owners of camera Camileo S20 and also Camileo S10 - Camileo S20 is derived of Camileo S10, may be any of them discovered the way how to get the date and time into video.

Can Iphoto display the date and time of a pic on the pic?

I know I can get info and see a pics info, but can Iphoto display the date and time of a pic on the pic itself?

Use the Photos->Batch Change menu option to set the Title to Date and Time. That will give you what you want under each thumbnail.
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto (iPhoto.Library for iPhoto 5 and earlier versions) database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've created an Automator workflow application (requires Tiger or later), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. There are versions that are compatible with iPhoto 5, 6, 7 and 8 libraries and Tiger and Leopard. Just put the application in the Dock and click on it whenever you want to backup the dB file. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.
NOTE: iPhoto 8's new option in the library rebuild pane, "Rebuild the iPhoto Library Database from automatic backup" may make this tip obsolete. We'll know when users have occasion to use it and see if that's the case.

Searching for pictures by both date and keyword

When I have the calendar tab up and a date with pictures is highlighted, when I go to select a keyword the calendar goes away and then I am back to my library. How do I search for pictures by both date and keyword?
Thank You, Margaret

Margaret:
You can use a Smart Album to do the job. Just use the criteria:
Keyword is "xxxx" and Date is "dd/mm/yyyy"
Be sure to select All in the Match menu.
Or you can use the text find box at the bottom in this undocumented way:
1 - click on the library icon and in the text box type any character.
2 - select the library icon again and type Command-I
3 - in the Find window (the same as what you get for a Smart Album) set your criteria: Keyword is "xxx" and Date is "dd/mm/yyyy" and set "All" as the Match criteria.
4 - hit the search button and those pictures will show up in the thumbnail window.
5 - when complete clear the text box at the bottom of the window to get all of the photos back.
Either way you'll get those photos with the keyword and particular date.

How to display dynamic datas and double datas (chart)

Hi all !
I would like to display dynamic datas and double datas by using charts.
However, it doesn't work and I don't understand why.
Can you help me to fix that ?
Best regards,
- John
Attachments:
double_dynamics_data.vi ‏54 KB

Hi John,
the sine looks like it should look with your VI!
You convert the DDT to a scalar DBL. That conversion will only use the first sample of the generated sine waveform - usually this is always the same (offset) value when you generate full periods… Or to put it in a mathematical expression: sin(0°)+4 = 4!
When you want to display waveform you should work with waveforms!
Actually, I have used Dynamic data type in order to simulate an signal.
Well, I also simulated a signal in my example VI. I didn't use any ExpressVI to do so…
In a few weeks, I will receive a sensor. I will use in LabView 'DAQ Assistant' whose the ouput is a Dynamic Data.
Nobody forces you to use the DAQAssistent ExpressVI. There are nice DAQmx functions available and LabVIEW comes with a lot of ready-to-use example VIs…
That's why, I used in first place, the 'Simulate signal'. So I think I should keep Dynamic Data Type
I do think you don't need to use the DDT. I think it's better to understand what is going on in your VI. And I think the DDT will be no help for you…
Best regards,
GerdW
CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
Kudos are welcome

Displaying both Hindi and Arabic numerals in Oracle 10g PDF report

Hi….
Oracle experts told us to ask “In how many ways we can do it in oracle?” instead of asking “Can we do it in Oracle?” , I need ONE way to solve the following problem, it toke to much time and I don’t know if it can be solved !
The problem:
Can we print in - Oracle 10g reports - a PDF report with BOTH Hindi and Arabic numerals?
Well, at design time everything is fine, you can use right-to-left, left-to-right and the print preview is showing BOTH Hindi/Arabic numerals fine, but when I tried to produce it as a PDF, unfortunately its not, means its either all Hindi or all Arabic numerals !
I tried everything possible, environment variables: NLS_LANG, REPORTS_BIDI_ALGORITHM, and REPORTS_ARABIC_NUMERLS, setting Digit substitution to Context in windows regional settings, uifont.ali is modified properly according to metalink note, but nothing solved this issue!
I noticed something, when I used the DESTYPE=printer and DESNAME=PDF995 (one of the PDF printers) , it worked fine , means the problem could be in the generic PDF generator of the Oracle reports server,
But even with PDF995 you still need to feed the file name, which is not suitable for multi-user environment that need the report to be displayed via web browser.
Does anybody face this before?
Edited by: khaled.w on May 24, 2010 7:29 AM
Edited by: khaled.w on May 24, 2010 7:35 AM

Don't tell so much.
Check the following link
1. PDF Reports in Unicode / Arabic &amp; English | Oracle Community
2. OraFAQ Forum: Reports & Discoverer » Report in Arabic(pdf) (merged)
3. Arabic Report generated to text file giving Jun... | Oracle Community
Hope this helps
Hamid

Display both company AND name in contacts, incoming calls, messages, etc

Is there no way to have both a person's full name, AND company appear on the display of contacts and incoming calls??
I have over 2,000 contacts in my address book, many from the same company, and many with the same (or similar) names.
When someone with a very common name calls or texts, it's impossible for me to remember who they are without listing their company as well. If I have both Sam Michaels and Samantha Mitchells in my address book, sometimes the only way to distinguish between the two is knowing that Sam works for Viacom and Samantha works for Universal.
I've heard that the only way to do this is to include the company name in the person's main "name" field. This is problematic because A) it would take me a million years to go through and personally edit all of my 2k+ contacts, and B) this is completely counter-intuitive of having the company/office/job title lines available as fields in the address book in the first place.
Does anyone know a way around this at all?? Apple really needs to find a way to fix this, as it's super inconvenient for business professionals. This is just another one of my many frustrations with Apple products being not intuitive for workers in the corporate world.

I'm not aware of a way to do this, however I'm certain that when my phone rings, it shows the person's name and company information that I have written in contacts. I've not taken time to check lately, but that seems to be the case for contacts that have a company name in them. Ones that do not have a company name show the person's name and then the label for the phone number they are using, such as home, work, mobile, etc.
Otherwise, feedback to Apple goes HERE, and then just click on the appropriate subject.

BEx web report selection screen entries retain when closing and opening the report again

Hello all,
please help me in the below query.
Till last month the entries we made in BEx web report selection screen are retained in the selection screen even when we close the web report and open it again from portal without logging off. But recently this functionality is missing and the entries in selection screen are not remembered when we close and open the same report again. It is a good feature for the users. Have you come across this issue?

No...I think i can reframe the question very clearly......For ex: we are opening a Bex Web report...so initally we would be prompted by the variable selection screen...in which we have to give the entries(Values) for those variables like Cal month, Sales org, Company code, etc.....Later on the report will get open based on the values we have given......
Now if we close the particular report without logging off then if i try to open the same report that selected values are missing.....earlier it used to remember the values we have given until we log off....But now that functionality is missing....It was very useful feature.....Can you please tel me what can be done to resolve this??
I hope the explanation would be clear now.

Display both PO and Street in address node

Hi Gurus,
I want to display an adderss with both Street and PObox.
For that I am using an address node.If I give "POBOX has priority", only POBOX is displayed.If I give "STREET has priority", only street is displayed in the options available for address node.
How to get both of them displayed in the address. Using an address node is Mandatory.
Is it possible to dispaly both po and street ?
Awaiting your valuable answers,This is an urgent requirement
Thanks,
Raj.

Hi Raj,
Will you be more specific and clear about your question. Please explain where you are giving this priority and in which form like textfield and how you want to show the address. and also explain the node(cardinality, attributes) you are using as address node.
Regards,
Vaibhav Tiwari.

Ad Hoc Query - reporting on both PA and OM data in same query.

Is it really not possible to report on both PA and OM in the same query? Does the two different infosets prevent you from doing this?
As a workaround I can run two separate queries and just join the data using Excel. However - I'm having some trouble using the OM infoset. I have a list of job ID's and I'm trying to report on the job short text and the "duty code" which is a custom OM object. Is there a way to add this custom object to the infoset?
Also, I'm finding it difficult to report on the relationships as "Object" is always listed as an output ONLY. Is there a way to make it available as an input?

If you are using logical database PNP, then you can try to add infotype and check the option 'Infotype of related objects' .
This will allow you various HRP tables to add to your query by the relationship.
If you check responsiblity you can use relationship B007 and selecting 1000 would give you the short text and long text of the ID.
This is a very good option available for PNP database.
Regards,
SC

Can I display both time and date on iPhone 4s home screen?

The time and date is diplayed when I 'slide to open' but can I have the day / date and time displayed when the screen shows all the apps? Currently it just shows the time at the very top and considering I'm this is my first iPhone, I've become used to having the date and time constnatly displayed. Any help would be greatly appreciated.

A pity it can't be displayed elsewhere.
Thanks for your prompt help.

Bi Dashboards issue works properly some times and after not display pointers data and give un expected error and throw login window

HI,
I have toff situation where we deployed bi dashboards in our site and it works some time and some times not,
and some times it keep loading and throw a login window.
works when
we restart performance point service and if not work
we re create secure store service and generated new key and create new pps service application
before that we stopped secure store and pps service using c.a in application server
we are using ssas for datasource to connect from dashboard designer
we have seperate server for ssas dbs
seperate application server running: pps service and secure store service
two web front ends: one of running secure store
1 Domain controller + central admin service running
some times after 4 -5 hours bi dashboards works , we dashboards not display data and throw un expected errors,
also when we try to connect using a dashboard designer from a seperate client machine in same domain ,we have same issue , we unable to connect to ssas datasource server, and if connect some times unable to deploy dashboards.
we tried every thin icreased server time out values in ssas server
:\Program Files\Microsoft SQL Server\MSAS10_50.MSSQLSERVER\OLAP\Config\msmdsrv.ini. in this location
and in
c:\program files\common files\microsoft shared\web server extensions\14\webclients\ppsmonitoringServer\client.config
maxStringContentLength="2147483647"
maxNameTableCharCount="2147483647"
maxBytesPerRead="2147483647"
maxArrayLength="2147483647"
maxDepth="2147483647" />
even we have same issue
is some thing happening when dashboards working some time and after some time not
is a secure store crashing or its still request pending in IIS and not authenticating to data soruce why
below are the logs
Here are the results of the log analysis :
server wfe1
09/01/2014 14:43:44.66 w3wp.exe (0x2128) 0x158C PerformancePoint Service PerformancePoint Services 39 Critical A PerformancePoint service application call was aborted by the caller. This may indicate the HttpRuntime executionTimeout for the Web Application
is configured to a value smaller than the DataSourceQueryTimeout for the PerformancePoint Service Application. 8bc44f14-acef-49bf-b1c1-2755ea7e6e24
09/01/2014 14:43:44.66 w3wp.exe (0x2128) 0x158C PerformancePoint Service PerformancePoint Services ef8z Critical ‏‏حدث
استثناء
أثناء عرض
عنصر ويب.
قد تساعد
معلومات التشخيص
التالية في
تحديد سبب
هذه المشكلة: Microsoft.PerformancePoint.Scorecards.BpmException: ‏‏لقد
انتهت
مهلة الطلب
أو تم
إجهاضها. تم
تسجيل تفاصيل
إضافية من
أجل المسؤول. ‏‏رمز
خطأ "خدمات PerformancePoint"
هو 20700. 8bc44f14-acef-49bf-b1c1-2755ea7e6e24
09/01/2014 14:43:44.66 w3wp.exe (0x2128) 0x158C SharePoint Foundation Runtime ba3q Medium Redirect to error.aspx?ErrorText=Request%20timed%20out%2E failed. Exception: System.Web.HttpException: The remote host closed the connection. The error code is 0x800704CD.
at System.Web.Hosting.IIS7WorkerRequest.RaiseCommunicationError(Int32 result, Boolean throwOnDisconnect)     at System.Web.Hosting.IIS7WorkerRequest.ExplicitFlush()     at System.Web.HttpResponse.Flush(Boolean finalFlush)
at System.Web.HttpResponse.End()     at Microsoft.SharePoint.Utilities.SPUtility.Redirect(String url, SPRedirectFlags flags, HttpContext context, String queryString) 8bc44f14-acef-49bf-b1c1-2755ea7e6e24
09/01/2014 14:47:32.69 w3wp.exe (0x2128) 0x2154 Web Content Management Publishing Cache 7363 Critical Object Cache: The super reader account utilized by the cache does not have sufficient permissions to SharePoint databases. To configure the account use
the following command 'stsadm -o setproperty -propertyname portalsuperreaderaccount -propertyvalue account -url webappurl'. It should be configured to be an account that has Read access to the SharePoint databases. Additional Data: Current default
super reader account: NT AUTHORITY\LOCAL SERVICE 78c107cd-0d4b-46f5-8e1a-0d9b4ebc7b29
09/01/2014 15:07:40.74 w3wp.exe (0x2128) 0x209C PerformancePoint Service PerformancePoint Services 20 Critical The user "i:Anonymous" attempted to access an item in the following location:
http://www.xxx.xxx.sa/ar-sa/Notary/Rspointer/Lists/PerformancePoint Content/28_.000 Verify that the location exists and that the user has the "Read Items" permission.
Exception details: Microsoft.PerformancePoint.Scorecards.BpmException: ‏‏لقد
انتهت
مهلة الطلب
أو تم
إجهاضها. تم
تسجيل تفاصيل
إضافية من
أجل المسؤول.     at Microsoft.PerformancePoint.Scorecards.Store.Dao.SPListItemDao.Get(ISPFcoCache cache, Guid webSiteID, RepositoryLocation location, SPListItem item)
at Microsoft.PerformancePoint.Scorecards.Store.Dao.SPListItemDao.Get(ISPFcoCache cache, Guid webSiteID, RepositoryLocation location)     at Microsoft.PerformancePoint.Scorecards.Store.SPDataStore.SPItemGet(RepositoryLocation location, String
spObjectTypeId) abf0263d-7333-4e4f-9cd4-a3a4dcb700c0
09/01/2014 15:13:25.92 w3wp.exe (0x2128) 0x18DC PerformancePoint Service PerformancePoint Services 20 Critical The user "i:Anonymous" attempted to access an item in the following location:
http://www.xxx.xxx.sa/ar-sa/Notary/Rspointer/Lists/PerformancePoint Content/218_.000 Verify that the location exists and that the user has the "Read Items" permission.
Exception details: Microsoft.PerformancePoint.Scorecards.BpmException: ‏‏لقد
انتهت
مهلة الطلب
أو تم
إجهاضها. تم
تسجيل تفاصيل
إضافية من
أجل المسؤول.     at Microsoft.PerformancePoint.Scorecards.Store.Dao.SPListItemDao.Get(ISPFcoCache cache, Guid webSiteID, RepositoryLocation location, SPListItem item)
at Microsoft.PerformancePoint.Scorecards.Store.Dao.SPListItemDao.Get(ISPFcoCache cache, Guid webSiteID, RepositoryLocation location)     at Microsoft.PerformancePoint.Scorecards.Store.SPDataStore.SPItemGet(RepositoryLocation location, String
spObjectTypeId) b35bf864-54f4-43fa-88a8-44cdf938bfa2
09/01/2014 15:11:10.87 w3wp.exe (0x2128) 0x1F88 PerformancePoint Service PerformancePoint Services 20 Critical The user "i:Anonymous" attempted to access an item in the following location:
http://www.xxx.xxx.sa/ar-sa/Courts/Bic/Lists/PerformancePoint Content/4_.000 Verify that the location exists and that the user has the "Read Items" permission.
Exception details: Microsoft.PerformancePoint.Scorecards.BpmException: ‏‏لقد
انتهت
مهلة الطلب
أو تم
إجهاضها. تم
تسجيل تفاصيل
إضافية من
أجل المسؤول.     at Microsoft.PerformancePoint.Scorecards.Store.Dao.SPListItemDao.Get(ISPFcoCache cache, Guid webSiteID, RepositoryLocation location, SPListItem item)
at Microsoft.PerformancePoint.Scorecards.Store.Dao.SPListItemDao.Get(ISPFcoCache cache, Guid webSiteID, RepositoryLocation location)     at Microsoft.PerformancePoint.Scorecards.Store.SPDataStore.SPItemGet(RepositoryLocation location, String
spObjectTypeId) 7cea0eb6-214f-4d7b-a6e7-97a0fe11c956
09/01/2014 15:11:40.87 w3wp.exe (0x2128) 0x2150 PerformancePoint Service PerformancePoint Services 20 Critical The user "i:Anonymous" attempted to access an item in the following location:
http://www.xxx.xxx.sa/ar-sa/Notary/Rspointer/Lists/PerformancePoint Content/162_.000 Verify that the location exists and that the user has the "Read Items" permission.
Exception details: Microsoft.PerformancePoint.Scorecards.BpmException: ‏‏لقد
انتهت
مهلة الطلب
أو تم
إجهاضها. تم
تسجيل تفاصيل
إضافية من
أجل المسؤول.     at Microsoft.PerformancePoint.Scorecards.Store.Dao.SPListItemDao.Get(ISPFcoCache cache, Guid webSiteID, RepositoryLocation location, SPListItem item)
at Microsoft.PerformancePoint.Scorecards.Store.Dao.SPListItemDao.Get(ISPFcoCache cache, Guid webSiteID, RepositoryLocation location)     at Microsoft.PerformancePoint.Scorecards.Store.SPDataStore.SPItemGet(RepositoryLocation location, String
spObjectTypeId) 4154222b-6ff0-4b64-81b8-d08501a19278
server wfe 2
09/01/2014 14:50:59.05 w3wp.exe (0x1294) 0x1D88 Web Content Management Publishing Cache 7363 Critical Object Cache: The super reader account utilized by the cache does not have sufficient permissions to SharePoint databases. To configure the account use
the following command 'stsadm -o setproperty -propertyname portalsuperreaderaccount -propertyvalue account -url webappurl'. It should be configured to be an account that has Read access to the SharePoint databases. Additional Data: Current default
super reader account: NT AUTHORITY\LOCAL SERVICE 382f711d-cdad-4c5d-be88-2e7d6f36dde2
09/01/2014 14:50:59.05 w3wp.exe (0x1294) 0x1D88 Web Content Management Publishing Cache 7363 Critical Object Cache: The super reader account utilized by the cache does not have sufficient permissions to SharePoint databases. To configure the account use
the following command 'stsadm -o setproperty -propertyname portalsuperreaderaccount -propertyvalue account -url webappurl'. It should be configured to be an account that has Read access to the SharePoint databases. Additional Data: Current default
super reader account: NT AUTHORITY\LOCAL SERVICE 382f711d-cdad-4c5d-be88-2e7d6f36dde2
09/01/2014 14:50:59.05 w3wp.exe (0x1294) 0x1D88 Web Content Management Publishing Cache 7363 Critical Object Cache: The super reader account utilized by the cache does not have sufficient permissions to SharePoint databases. To configure the account use
the following command 'stsadm -o setproperty -propertyname portalsuperreaderaccount -propertyvalue account -url webappurl'. It should be configured to be an account that has Read access to the SharePoint databases. Additional Data: Current default
super reader account: NT AUTHORITY\LOCAL SERVICE 382f711d-cdad-4c5d-be88-2e7d6f36dde2
09/01/2014 14:50:59.05 w3wp.exe (0x1294) 0x1D88 Web Content Management Publishing Cache 7363 Critical Object Cache: The super reader account utilized by the cache does not have sufficient permissions to SharePoint databases. To configure the account use
the following command 'stsadm -o setproperty -propertyname portalsuperreaderaccount -propertyvalue account -url webappurl'. It should be configured to be an account that has Read access to the SharePoint databases. Additional Data: Current default
super reader account: NT AUTHORITY\LOCAL SERVICE 382f711d-cdad-4c5d-be88-2e7d6f36dde2
In the Roiscan logs we get an error in regards to the English Language pack:
Review Items
============
Error:                       Product {90140000-1015-0409-1000-0000000FF1CE} - Microsoft SharePoint Foundation 2010 1033 Lang Pack: has unexpected
file state(s).
adil

chinnijagadeesh,
You suck!
Signed: The rest of the universe.
... and quit crossposting FFS... it really is quite annoying!

Bex Web Ad-hoc Analysis Template - Displaying both Data and Graph Tabs

Similar Messages

Maybe you are looking for