BEX64 error after updating to CC 2014.1

I have Premiere Pro CC 2014 in my office, then 2014.1 was release so I was excited to upgrade. Then every project I opened crashes with BEX64 error. Is My specs or something?
Intel Core  i7 4770
16gb RAM
Intel HD Graphics 4600
please email me at : [email protected]
THANK YOU IN ADVANCE!!!

I followed this :
+I have found a way to fix this "coreFoundationUnknownErr" error with Logic 9.1 though, at least on my system.+
+First you remove these:+
+/Library/Application Support/ProApps/Logic Studio System ID+
+/Library/Application Support/ProApps/ProAppsSystemID+
+Then launch your Logic 9.0.2 FIRST, enter your serial and continue. Open a song and make sure it all works. Quit and then launch Logic 9.1. Should work perfectly after that. Remember, this is all in 10.5.8 Leopard NOT Snow Leopard. I have zero issues so far in 10.6.2 Snow Leopard. I found that if your try to launch 9.1 right after removing your ID's, you still get the same error. This seems to only work if you launch 9.0.2 first.+
+Before I did all this I tested the 9.1 app from my Snow Leopard drive to make sure it wasn't the Logic app. From within 10.6.2 I went to MusicOS/Applications/ (my other 10.5 Leopard drive) and tried Logic 9.1 it booted perfectly so I knew it wasn't the actual app itself, therefor it must be either an ID issue or the frameworks files were broken. I didn't think it was the frameworks as both Logic 8.0.2/9.0.2 worked fine so I went with the ID issue. I have not launched 8.0.2 since I removed the ID's yet, but I don't really have a reason to as 9.0.2 has been reliable for me thus far. I am now going to run 9.1 and hope it continues to be stable for me too!+
But since i already installed the 9.1 update how can i op go back to the 9.0.2. ?

Similar Messages

  • FTP Validation error after updating to Muse 2014 - What am I missing?

    I've updated from Muse CC to Muse 2014 as part of creative cloud. However, I'm now getting a validation error when I try to upload the site via ftp. I've checked all the fields. Any ideas?
    This works with Muse CC:
    This doesn't work with Muse 2014:
    Thanks for any help!

    Hi Kieran,
    What happens when you enter, 'murphysicecream.ie' in the domain name?
    - Abhishek Maurya

  • After update to CC 2014, Ps can't pass edited image to Lr

    As title says, after update to CC 2014 and uninstalling old version I can't get a workflow I used to get. After opening image in Ps from Lr and saving it gives an error:
    Is there any easy way to fix this?
    If not, how can I reinstall Ps and Lr without losing all my edits and presets in Lr?

    Ok.. So now after updating CC, Ps CC 2014 and Lr I can't even pass image to Ps from Lr. When I choose "Edit in Adobe Photoshop CC 2014", Ps just opens, but no image is loaded. Can I get some support on this problem?

  • Error after update : "Method 'Upgrade' does not have an implementation"

    Hello,
    After installing the last Updates for my SharePoint Farm 2013, I ran into an issue. When I try to connect to the site, I get this error :
    Method 'Upgrade' in type 'Microsoft.SharePoint.WorkflowServices.WorkflowServiceApplicationProxy'
    from assembly 'Microsoft.SharePoint.WorkflowServices, Version=15.0.0.0, Culture=neutral,
    PublicKeyToken=71e9bce111e9429c' does not have an implementation.
    And there is a lot of strange behaviours within my farm. I cannot run a psconfig, the services FIMService
    and FIMSynchronizationService cannot start, I can see the category "Office 365" in Central Administration but I have a SharePoint Server 2013, not online or any 365 thing... And I cannot uninstall previous SharePoint Updates...
    Any idea ?
    Thanks in advance for your answer.
    Mike

    Hi Mike,
    If you are using SharePoint 2013 Server edition, please re-download the
    SharePoint Server 2013 SP1(KB2880552) instead of SharePoint Foundation version, then install it on the server and check results again, here is another post with similar
    issue you can take a look.
    http://social.technet.microsoft.com/Forums/sharepoint/en-US/ee5c9cee-2b8c-473a-adc6-05d74aac9511/error-after-update-installation-method-method-upgrade-in-type-?forum=sharepointadmin
    http://blogs.technet.com/b/stefan_gossner/archive/2014/04/22/sp1-for-sharepoint-2013-has-been-rereleased.aspx
    http://thesharepointfarm.com/2014/05/ms14-022-known-issues/
    Thanks
    Daniel Yang
    TechNet Community Support

  • File adapter error after updating to SP19 (INBOUND_BINDING_ERROR)

    File adapter error after updating to SP19 (INBOUND_BINDING_ERROR)
    Hi all,
      im having some troubles after the installation of SP19 (from SP16 in NW04) with File Adapter (File->Idoc scenario).
    In message monitoring (Adapter Engine), I have several messages with status "System Error". The error text is :
    <i>Received XI System Error. ErrorCode: INBOUND_BINDING_ERROR
    ErrorText:   ErrorStack: Error in sender agreement for party '', service 'LEGACY_DEV', interface namespace 'http://XXXXX.com/XXXXXX', interface 'INTERFACE_OB' No sender agreement found for , , , , ,</i>
    Im sure that the Integration Directory settings have not been changed. So I tried the following, but the problem persists:
    - Deactivation/Activation of File Adapter channel
    - check that user XIISUSER is not locked
    - checked SXI_CACHE (it seems ok)
    - Many CPA full refresh
    - Dummy modifications of File Adapter channels (a dummy modification of the description)
    - Reboot J2EE
    I've seen that someone else had problems after upgrading to SP19. I'd really appreciate any suggestion of how to solve my issue.
    Thank you
    Manuel

    Hi Prabhu,
      I've already tried to restart server, but nothing happened. (Before update to SP19, the interface worked well).
    This is the error log from message monitoring:
    <i> 2007-01-16 16:37:34 Success Channel cc_File_Snd_Bolle: Entire file content converted to XML format
    2007-01-16 16:37:34 Success Send binary file  "BOLLE_20061229142059.CSV" from FTP server "AS810T:/sapinbound", size 8733 bytes with QoS EOIO
    2007-01-16 16:37:34 Success Application attempting to send an XI message asynchronously using connection AFW.
    2007-01-16 16:37:34 Success Trying to put the message into the send queue.
    2007-01-16 16:37:35 Success Message successfully put into the queue.
    2007-01-16 16:37:35 Success The application sent the message asynchronously using connection AFW. Returning to application.
    2007-01-16 16:37:35 Success The message was successfully retrieved from the send queue.
    2007-01-16 16:37:35 Success File "BOLLE_20061229142059.CSV" successfully archived on FTP server "AS810T" as "/sapinbound/bolle/20070116-163735-245_BOLLE_20061229142059.CSV"
    2007-01-16 16:37:35 Success The message status set to DLNG.
    <b>2007-01-16 16:37:35 Error Received XI System Error. ErrorCode: INBOUND_BINDING_ERROR ErrorText:   ErrorStack: Error in sender agreement for party '', service 'LEGACY_DEV', interface namespace http://XXXXX.com/XXXXXX', interface 'INTERFACE_OB' No sender agreement found for , , , , ,
    2007-01-16 16:37:35 Error Transmitting the message to endpoint http://SERVERNAME:8000/sap/xi/engine?type=entry using connection AFW failed, due to: com.sap.aii.af.ra.ms.api.RecoverableException: INBOUND_BINDING_ERROR:. </b>
    2007-01-16 16:37:35 Success The asynchronous message was successfully scheduled to be delivered at Tue Jan 16 16:42:35 CET 2007.
    2007-01-16 16:37:35 Success The message status set to WAIT.
    2007-01-16 16:42:35 Success Retrying to send message. Retry: 1</i>
    After this, the system try to resend the message, and the same error appears several times.
    Ty,
    Manuel

  • Received the error when updating to inDesign 2014 "Unable to extract to temp directory."  c

    Received the error when updating to inDesign 2014 "Unable to extract to temp directory."  Anyone have a fix for this?

    Tjshannonhigg you will want to ensure that the User account you are logged into has proper access to the temp directory and that there is sufficient disk space available.

  • IE8 unsupported error after updating to ZCM 11 Support Pack 1 (11.1)

    Does any experience this problem after updating to ZCM11sp1?
    I keep getting IE8 unsupported error after updating to ZCM 11 Support
    Pack 1 (11.1) although I am running on IE8 already. Now remote
    management is not working because of this incompatible browser errors. I
    tried this following
    link:http://www.novell.com/support/viewCo...9158&sliceId=1
    But it does not help.
    Any suggestion or idea would be greatly appreciated!!!

    On 8/29/2011 8:26 AM, craig wilson wrote:
    > Double Check all of your settings there, including the option to view
    > Intranet sites in compatibility mode.
    >
    > For some reason, your IE8 is reporting itself as IE7 and running in IE7
    > mode which is no longer supported.
    >
    > On 8/29/2011 9:17 AM, April wrote:
    >> Does any experience this problem after updating to ZCM11sp1?
    >>
    >> I keep getting IE8 unsupported error after updating to ZCM 11 Support
    >> Pack 1 (11.1) although I am running on IE8 already. Now remote
    >> management is not working because of this incompatible browser errors. I
    >> tried this following
    >> link:http://www.novell.com/support/viewCo...9158&sliceId=1
    >>
    >>
    >>
    >> But it does not help.
    >>
    >> Any suggestion or idea would be greatly appreciated!!!
    >
    >
    Thank you for your responding. I have already checked to view Internet
    sites in compatibility mode with no luck. I tried several different
    computers with IE8 but they all got the same problem.

  • Error after updating kernel 640U patch to 247

    Hi Forum,
    There are some repetitive errors after updating kernel 640U patch to 247:
    ======================================================
    X Sun Feb 22 07:01:01 2009
    X  *** ERROR => EmActiveData: Invalid Context Handle -1 [emxx.c     2220]
    X
    X Sun Feb 22 07:01:08 2009
    X  *** ERROR => EmActiveData: Invalid Context Handle -1 [emxx.c     2220]
    X
    X Sun Feb 22 07:01:19 2009
    X  *** ERROR => EmActiveData: Invalid Context Handle -1 [emxx.c     2220]
    X
    ======================================================
    Please help.
    Regards,
    Agoes
    Edited by: Agoes Boedi Poerwanto on Feb 23, 2009 7:53 AM
    Edited by: Agoes Boedi Poerwanto on Feb 23, 2009 7:55 AM
    Edited by: Agoes Boedi Poerwanto on Feb 23, 2009 7:56 AM
    Edited by: Agoes Boedi Poerwanto on Feb 23, 2009 7:57 AM

    Hello Agoes,
    You can ignore these error messages,these come when u upgrade the kernel to 246 or 247
    Please refer to not 1239685 for more info
    So no issues
    cheers
    Rohit

  • .wav error after update

    This past week my curve did an automatic update when I plugged it into the manager. Prior to the update I was able to play the .wav files that are emailed to me by my office voicemail system. Now after the update I get an error stated unsupported format. I'm on Sprint.
    Anyone know why this error is occurring and how I can get it to play the .wav files again?
    Thanks, 

    Hello,
    I get the same error after updating through Help->Check for Updates. I am at version 1.1.2.25 and the update does not change the version number of Oracle SQL Developer (Help->About), it remains at 1.1.2.25 (although if I look in extensions tab, it says: oracle.sqldeveloper 1.1.3.27.66 Loaded, possible bug in displaying version number?). These are the updates applied:
    Upgraded Extensions
    Oracle Microsoft Access Browser version 1.1.3.27.66
    Oracle SQL Developer - Snippet version 10.1.3.27.66
    Oracle SQL Developer version 1.1.3.27.66
    Oracle SQL Developer - Reports version 10.1.3.27.66
    Oracle SQL Server Browser version 1.1.3.27.66
    Oracle MySQL Browser version 1.1.3.27.66
    Oracle SQL Developer - Worksheet version 10.1.3.27.66
    Oracle SQL Developer - Extras version 1.1.3.27.66
    Oracle SQL Developer - SearchBar version 10.1.3.27.66
    Oracle SQL Developer - Object Viewer version 10.1.3.27.66
    I ran the update several times and was able to reproduce the error under a specific condition. If I am connected to a database at the time of the update I get the error. If I am not conneceted at the time of the update I do not get the error.
    As stated, by Donal, sql developer seems to get over the problem after restarting itself twice.
    Mark

  • Error after update Oracle SQL Developer Migration Tools

    Hi,
    I'm receiving a error after the update of Oracle SQL Developer (v.1.1.3.27.66) to work with mySQL migration tool.
    This error appear when it´s restarting:
    Exception Stack Trace:
    java.lang.IllegalAccessError: tried to access class oracle.ide.net.IdeURLStreamHandler from class oracle.ide.net.URLFileSystem$1
         at oracle.ide.net.URLFileSystem$1.createURLStreamHandler(URLFileSystem.java:87)
         at oracle.ide.boot.URLStreamHandlerFactoryQueue.createURLStreamHandler(URLStreamHandlerFactoryQueue.java:119)
         at java.net.URL.getURLStreamHandler(URL.java:1106)
         at java.net.URL.<init>(URL.java:393)
         at java.net.URL.<init>(URL.java:283)
         at oracle.ide.net.URLFactory.newURL(URLFactory.java:636)
         at oracle.ide.layout.URL2String.toURL(URL2String.java:104)
         at oracle.ideimpl.editor.EditorUtil.getURL(EditorUtil.java:150)
         at oracle.ideimpl.editor.EditorUtil.getNode(EditorUtil.java:122)
         at oracle.ideimpl.editor.EditorUtil.loadContext(EditorUtil.java:91)
         at oracle.ideimpl.editor.TabGroupState.loadStateInfo(TabGroupState.java:950)
         at oracle.ideimpl.editor.TabGroup.loadLayout(TabGroup.java:1751)
         at oracle.ideimpl.editor.TabGroupXMLLayoutPersistence.loadComponent(TabGroupXMLLayoutPersistence.java:31)
         at oracle.ideimpl.controls.dockLayout.DockLayoutInfoLeaf.loadLayout(DockLayoutInfoLeaf.java:123)
         at oracle.ideimpl.controls.dockLayout.AbstractDockLayoutInfoNode.loadLayout(AbstractDockLayoutInfoNode.java:631)
         at oracle.ideimpl.controls.dockLayout.AbstractDockLayoutInfoNode.loadLayout(AbstractDockLayoutInfoNode.java:628)
         at oracle.ideimpl.controls.dockLayout.AbstractDockLayoutInfoNode.loadLayout(AbstractDockLayoutInfoNode.java:614)
         at oracle.ideimpl.controls.dockLayout.DockLayout.loadLayout(DockLayout.java:302)
         at oracle.ideimpl.controls.dockLayout.DockLayoutPanel.loadLayout(DockLayoutPanel.java:128)
         at oracle.ideimpl.editor.Desktop.loadLayout(Desktop.java:356)
         at oracle.ideimpl.editor.EditorManagerImpl.init(EditorManagerImpl.java:1879)
         at oracle.ide.layout.Layouts.activate(Layouts.java:784)
         at oracle.ide.layout.Layouts.activateLayout(Layouts.java:186)
         at oracle.ideimpl.MainWindowImpl$6.runImpl(MainWindowImpl.java:734)
         at oracle.javatools.util.SwingClosure$1Closure.run(SwingClosure.java:50)
         at java.awt.event.InvocationEvent.dispatch(InvocationEvent.java:199)
         at java.awt.EventQueue.dispatchEvent(EventQueue.java:597)
         at java.awt.EventDispatchThread.pumpOneEventForFilters(EventDispatchThread.java:273)
         at java.awt.EventDispatchThread.pumpEventsForFilter(EventDispatchThread.java:183)
         at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:173)
         at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:168)
         at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:160)
         at java.awt.EventDispatchThread.run(EventDispatchThread.java:121)
    Anyone knows why that is happining?
    Thanks in advance,
    Felipe.
    Message was edited by:
    felipe.b

    Hello,
    I get the same error after updating through Help->Check for Updates. I am at version 1.1.2.25 and the update does not change the version number of Oracle SQL Developer (Help->About), it remains at 1.1.2.25 (although if I look in extensions tab, it says: oracle.sqldeveloper 1.1.3.27.66 Loaded, possible bug in displaying version number?). These are the updates applied:
    Upgraded Extensions
    Oracle Microsoft Access Browser version 1.1.3.27.66
    Oracle SQL Developer - Snippet version 10.1.3.27.66
    Oracle SQL Developer version 1.1.3.27.66
    Oracle SQL Developer - Reports version 10.1.3.27.66
    Oracle SQL Server Browser version 1.1.3.27.66
    Oracle MySQL Browser version 1.1.3.27.66
    Oracle SQL Developer - Worksheet version 10.1.3.27.66
    Oracle SQL Developer - Extras version 1.1.3.27.66
    Oracle SQL Developer - SearchBar version 10.1.3.27.66
    Oracle SQL Developer - Object Viewer version 10.1.3.27.66
    I ran the update several times and was able to reproduce the error under a specific condition. If I am connected to a database at the time of the update I get the error. If I am not conneceted at the time of the update I do not get the error.
    As stated, by Donal, sql developer seems to get over the problem after restarting itself twice.
    Mark

  • There is no sim card installed in the iphone error after update software from 4.1 to 5.01(iphone 3gs)

    there is no sim card installed in the iphone error after update software from 4.1 to 5.01(iphone 3gs)

    Thanks for reply, but problem is diffrent I got updated my device via I tune(IPSW 5.01) before that, it was working well after upgreade 4.1 to 5.01 I am getting problem. No cydia no signal!
    BTW Thank you,

  • After updating to version 2014.3 website build crashes on Save or Save As (new name)

    Sequence of events after updating to 2014.3
    Opened current build.
    Muse window said 1234 assets have changed
    Chose to update assets
    During review it brought up one item around 17%. I chose to merge with Muse.
    Completed updating assets
    Published complete site (not just changes), completed successfully
    Removed the item that was shown during the review (see above)
    Re-published site with "changes only" successfull
    Attempted to save the website using same name (Save)
    Crashed with this error:
    "Object UID:U19775 has two (or more) owners: U4308 and U4288"
    Reopened the same .muse file
    It opened the site with a "-recovered" tag added
    Did not say anything about assets changed like the first time.
    Published to a new site successfully
    Tried to Save As to a new .muse file
    Crashed and gave this long error:
    "UIDs With Multiple Owners: ImageFrame owned by PagePageItem and PagePageItem and PagePageItem and BaseLink and PagePageItem and PagePageItem"
    What can I try to resolve this or should I upload my .muse file for an examination?

    Delete all files in this folder C:\ProgramData\Adobe\SLStore
    Delete all files in this folder C:\Users\UserName\AppData\Local\Adobe\SLCache
    Delete all files in this folder C:\Users\UserName\AppData\Local\Adobe\OOBE
    1.Save a copy of this file to your desktop C:\Users\UserName\AppData\Roaming\Adobe\Adobe Muse CC
    2.Save a copy of this file to your desktop C:\Users\UserName\AppData\Roaming\Adobe\Adobe Muse CC Libraries\2014.3
    3.Save a copy of this file to your desktop C:\Users\UserName\AppData\Roaming\Adobe\Adobe Muse CC Library Then Delete these files in the original folders.
    When you are finished with the reinstall, open any Mulib file from wihin muse to re-establish the library folder ,
    copy files from the respective library folders that you have saved to your desktop and put them back in the library foders,
    so you dont have to reinstall all your Mulibs
    Now Uninstall all Muse Apps & restart your Computer
    Then start this process again
    1) First Install Muse_2014_2_CC_LS24 which will install to c:/
    2) Then Install Muse_2014_3_CC_LS24 Which should automatically install to C:\Program Files\Adobe\Adobe Muse CC 2014
    When this is complete you should have no folders left in C:\Adobe Muse CC 2014 (DONT DELETE THE FOLDER JUST LEAVE IT THERE)

  • XL Reporter gives Error after updating from PL 25 to SBO 2005 B PL 38

    Thnaks Shridhar,
    I have tested it in PL 38, its work fine but it has occoured one more problem i.e. XL Reporter is not working now.
    However I have updated XL Reporter to PL30, but it gives error.
    It has reamed used userdefined fields of the report. I have correct it too. But it gives error " Expansion has problem ".
    Can any body has idea for running XL reporter successfully after updating patch level.
    Can any one has faced this error or have solutions.
    Pl. Help. so that i can updating it to Final Live Database.
    Warm Regards,
    Chintesh Soni

    Hi..Shridharan,
    Thanks for reply and guidance....!!
    But I have successfully installed the XL Reporter means upgraded.
    Now, When I am running existing reports which are preapred in previous version, is not running. It gives error i.e. Expansion has problem.
    B4 this error, it has shown me some other error for user defined field was not found, when i have checked, the upgradation of patch level has changed the name of UDFs.
    I have modified the udf names in the report.
    Can u identify wht is the problem exactly please..
    With Warm Regards,
    Chintesh Soni

  • Big Trouble in all Video-Applications after updating to CC 2014

    After updating my CC to CC (2014), the new Video-Applications (Pl,Pr,Sg,Me) doesn't work.
    The other apps (Ps,Ai...) are ok. Ae starts, but it runs very faulty.
    Pl,Pr,Sg,Me doesn't even start.
    Did you really tested this software, before you published it?!
    I work on OSX 10.9.3 with Blackmagic Video-Hardware. German Version.

    I am Windows, but have some saved links
    -Mac 10.9.3 workaround https://forums.adobe.com/thread/1489922
    -more Mac 10.9.3 https://forums.adobe.com/thread/1491469
    -Enable Mac Root User https://forums.adobe.com/thread/1156604
    -more Root User http://forums.adobe.com/thread/879931
    -and more root user http://forums.adobe.com/thread/940869?tstart=0

  • After updating to new 2014 updates Lightroom would not go from 'library' to Develop - screen was greyed out with the message saying:- Please renew your membership to reinstate the develop module. My membership is up to date. I then uninstalls Lightroom an

    After updating from CC to new 2014 updates Lightroom would not go from 'Library' to 'Develop' - develop screen was greyed out showing the message 'Develop module is disabled. Please renew your membership to reactivate the Develop module.' Since my membership is fully up to date. I then uninstalled Lightroom 5 and then installed it again. Now when I try to open Lightroom 5 its LOGO flashes onto the screen and then 'crashes' in an instant. Please fix.

    Hi brooks45,
    Please try the steps mentioned in the KB Doc : http://helpx.adobe.com/lightroom/kb/unable-launch-lightroom-55.html
    Regards,
    Rave

Maybe you are looking for

  • Problem in SAVE_TEXT  usage

    I am facing problem in displaying the Long text in Open Maintenance orders IW31 Sscreen. i am uploading the long text using SAVE_TEXT function module. i can see the data in STXL table but i am not able to see the data on the transaction screen displa

  • Adobe Premiere Elements 7.0 keeps crashing

    hey I have been editing my video for a while now but for some reason now cant even click pause without crashing I dont no what I have done but please dont say i have to do it all over again. says adobe premiere Elements.exe has stopped working. one m

  • Where are my thumbnail previews?

    After upgrading my hard-drive (time machine restore) most of my thumbnail previews in Aperature 3 are gone.  Most but not all.  Also, many without the preview will render only in large format - but no thumbnail sticks after backing back out.  The pho

  • What is the font used within Single User Mode (CMD+S)?

    Upon holding Command + S, you'll be taken to what's called "Single User Mode", where a black screen with a bunch of white text appears. Does anyone know what the font here in this mode is called?

  • How to rewire logic to protools 10hdx

    is there anybody who knows how to do this?