BEx7 and it's latest patch must be installed!

Can somebody explain what this error means and how do I resolve this ?
I have the Bex Query designer installed and I am trying to connect Xcelsius 2008 SP3 with BW that has SAP Enhancement Package 1: Support Package Stack 05 installed.

I'm a newbie for SAP BO and Xcelsius. I'm getting the same problem as stated in this thread which is rated as not answered.
I have been spending too much time trying to find a fix for this error. Nothing is fruitful till now. Request the Experts to post the solution to fix this problem.
I have Xcelsius 2008, SAP GUI 7.1 and then SAP GUI 7.1 Patch 20 are installed. I'm able to logon to the SAP BW through SAP Logon GUI. But when I invoke the menu SAP-->Open on Xcelsius 2008 (so as to get to SAP BW), I'm getting this error
"BEx7 and it's latest patch must be installed" pops.  This error I got after entering the password details on the 'SAP Logon xxxServer' dialog box that popedup after invoking the SAP--> Open menu. I have no Idea where to get the Patch for BEx7. Also I don't know whether the Patch 20 for SAP GUI 7.1 includes the latest patch for BEx7 or not.
This problem must have been resolved by patrons who had posted this error in this thread. I would like the patrons/experts/ some one knows the solution should post a solution for this problem.

Similar Messages

  • Trying to install windows 7 and getting error message windows must be installed to a partition formatted as NTFS

    Trying to install windows 7 and getting error message Windows must be installed to a partition formatted as NTFS

    Welcome to Apple Support Communities
    Boot Camp Assistant creates a Windows partition in FAT32 to make the Windows XP installation easier.
    The problem is that Windows Vista, 7 and 8 require a NTFS partition, so the Windows installer gives this error. The only thing you have to do is to choose the BOOTCAMP partition in the installer and go to “Drive options (advanced)” > Format. Finally, install it

  • I cannot get my itunes software to recognize any device when plugged in.  I have several steps in the msconfig but still can't get it to recognize.  I am running windows 7 and have the latest version of itunes installed.

    We also have an ipod touch and my new ipad - which I have not attempted to sync yet until this issue is resolved.

    Most USB port do not supply enough current to charge the iPad.

  • What is the latest patch level for SAP CRM 7.0

    Hello Experts,
    I kindly request you to provide any information on what the latest patch for SAP CRM 7.0 is.  We currently are on SPS5 and the company is proposing to upgrade to SPS9. Please recommend some sources or help me know what the functionality of the new service patch level is?
    Thanks,
    VSK

    > I kindly request you to provide any information on what the latest patch for SAP CRM 7.0 is.  We currently are on SPS5 and the company is proposing to upgrade to SPS9. Please recommend some sources or help me know what the functionality of the new service patch level is?
    http://service.sap.com/patches
    --> SAP Application Components
    --> SAP CRM
    --> SAP CRM 7.0
    --> Entry by Component
    --> CRM Application Server ABAP
    --> SAP CRM ABAP 7.0
    --> Support Packages
    Scroll down and see the latest patches. If you click on the text you'll see the problems fixed.
    Support packages are by definition a collection of patches and fixes for problems, however, there may be small improvements in certain areas.
    Markus

  • IMac G5 fails to start after upgrading to latest patch

    My iMac G5 will hang every time I start it now since upgrading to Leopard and applying the latest patch. Most of the time I get to the gray apple screen and no further. I have to force a shutdown with the power button and try again. Most of the time it now takes me 2 or 3 tries to get the computer started.
    I hate to say it but since upgrading to Leopard my Windows PC has been more reliable. This is the worst upgrade I've ever been through and that includes Windows upgrades!
    Anybody have any insight as to why this is?
    Thanks

    Try booting from the Leopard DVD. Hold 'c' when the computer starts. You can then go into disk utility and try to repair/reinstall.

  • Latest Patch Cluster

    Hi,
    Can some help me, how to find and download the latest patch cluster package for sparc machine.
    Thanks
    Karthik

    Moderator Action:
    Not a hardware question. It is an OS question.
    Your post has been moved from the hardware forum you had put it into
    to a Solaris forum.
    (we guessed Solaris 10 -- you didn't botrher to mention what you are using.)
    Suggestion:
    Since patches and patch clusters are only available to those with service contract login credentials to Oracle Support, you might try to log into MOS and search over there.

  • Oracle 11g R2 - 64 bit latest patch sets and patch list

    Hi..
    I have installed oracle 11g R2 64 bit on top of windows server 2008 R2 64 bit enterprise edition...
    I want to install patch on oracle 11g database, please let me which is latest patch level need to be install?
    Rgards
    ananda

    982442 wrote:
    Go to https://support.oracle.com - Need to create another account for login or same account can be use to login?
    To use My Oracle Support, you must create a My Oracle Support account. And to know more about registering and accessing MOS, Use the below link.
    http://docs.oracle.com/cd/E25290_01/doc.60/e25224/registration.htm#MOSHP101
    HTH..

  • How to check SAP Component version and what is the latest patch installed

    Hi Experts,
    Can you please tell me that how to check SAP Component version and what is the latest patch installed.
    Thanks

    there are 2 easy ways
    1) log on to SAp System, on menu bar, slect system > Status...
    2) log on to system URL and click on system Status...
    Thanks,
    Prasant K Paichha

  • Where can I get NW 04 latest patch and how do I apply them?

    How do I apply the NW04 latest patch? What are the steps? Where can I get the lates patch?

    Hi John:
    The procedure to apply a patch mostly depends if you are using JAVA or ABAP.
    What are you currently using ?
    You can download the patches from https://service.sap.com/patches
    Hope this helps!
    Best Regards,
    Federico G. Babelis
    NetWeaver Certified Consultant
    GAZUM Technologies S.A.
    Consulting Services and Software Solutions
    http://www.gazum.com
    ...download FREE Marketplace Manager at: http://www.gazum.com/products

  • Br*Tools - latest patch and procedure

    Hi,
    We are having Br*tool version 7.00 (13) and need to apply latest patches.
    We have downloaded from
    Support Packages and Patches -> Additional Components -> SAP Kernel -> SAP KERNEL 64-BIT UNICODE -> SAP KERNEL 7.00 64-BIT UNICODE
    DBATL700O10_41-20001356.SAR      DBATOOLS Package for Oracle 10g       41
    Please let me know if its the current patch & how to proceed to apply the pathch?
    Environment:
    SAP R/3 4.6C, WINDOWS 2003 EXT 64 BIT, Oracle 10g.
    Regards
    Satya

    Satya,
    DBATL700O10_41-20001356.SAR DBATOOLS Package for Oracle 10g 41
    Please let me know if its the current patch & how to proceed to apply the pathch?
    Yes this is the latest patch available in SMP. You can download it   & uncar it & then install in your systm. This does not require a downtime.
    Thanks
    Sushil

  • I'm trying to load avira free mac security, and am told i am not on patch level required, to update to latest patch level, what to do?

    i'm trying to load avira free mac security and am told i am not on the patch level required, to update to latest patch level, what to do?

    afickera wrote:
    i'm trying to load avira free mac security ...
    Please See Here  >  Antivirus Discussion
    More Info Here  >  http://www.reedcorner.net/mmg/

  • Latest Patch Sets and where do I get them

    I was wondering what the latest patch set was for the Reports 6i server and where can I download it?
    Thanks,
    Brett

    Brett,
    The latest patch sets can be found starting on February 28th.
    They can be found at www.cbs.com and click on the Surivor Marquesas Logo.
    Oh wait...you did say 6i...patch-sets sorta sounded like contes-tants...my bad
    Paul

  • Latest patch to download and its url

    dear fellows can somebody point me to the latest patch of forms
    6i plz
    thanx
    geeta

    You can visit this:
    ftp://oracle-ftp.oracle.com/dev_tools/patchsets/dev2k/Win95NT

  • An alert message observered while appling latest patch MLR 10

    Hi Gurus,
    While applying latest patch MLR10 we observed an alert message as below
    "Creating log file "C:\oracle\midtier\.patch_storage\8404955\Apply_8404955_05-21-
    2009_15-44-27.log"
    Conflicting patches: 8204237,
    Patch(es) 8204237, conflict with the patch currently being installed (8404955).
    If you continue, patch(es) 8204237, will be rolled back and the
    new patch (8404955) will be installed.
    Note: If the patch currently being installed (8404955) is rolled back,
    it is recommended that the fixes being rolled back here (8204237, ) are reinstal
    led.
    If a merge of the new patch (8404955) and the conflicting patch(es)
    8204237, is required, contact Oracle Support Services and request
    a Merged patch.
    Do you want to STOP?
    Please respond Y|N
    Should we rollback the previous patch before applying MLR10 ? or can i continue with patch application ?
    Thanks in advance,
    Regards,
    Cema

    Please continue the MLR10 patch installation, this message would appear for the all patch installation (of course, patch number would be different though).

  • How to tell what was the latest patch installed on VMware ESX Server 3i, 3.5.0, 207095

    Hello Guys,
    I have been running an old server that was installed as a test system on a DELL workstation - Optiplex GX620 (32 bit).
    During the installation I had to confirgure the file: /usr/lib/vmware/installer/Core/TargetFilter.py to change the following line:
    "return interface.GetInterfaceType() == ScsiInterface.SCSI_IFACE_TYPE_IDE" to read:
    "return interface.GetInterfaceType() == ScsiInterface.SCSI_IFACE_TYPE_ISCSI" this made it worked and I have been using it for 3 years now. However, at this time I was hoping to update it with the latest patches and updates and I cannot figure out if I have ESXi or just ESX, nor what was my last update and what is required next.
    I have used this command to get the following output:
    # vmware -v
    VMware ESX Server 3i 3.5.0 build-207095
    ... I believe the 3i indicates that I have an ESXi 3.5.0 but is build-207095 the same buid as ESXi 3.5.0 Update 5?
    If not, how do I go about updating it? What is the KB # I should download?
    I can manage it using vSphere Client 5.5 and I can SSH into it using Putty.
    Note: When I run... "# esxupdate --bundle=ESXe350-201302401-I-SG.zip update" from within the folder where its at in the datastore, nothing happens... just a new line is scrolled.
    Also...
    # esxupdate query
    <?xml version="1.0"?>
    <query-response>
      <installed-packages>
        <package ID="ESX-207095">
          <name>firmware</name>
          <version>3.5.0</version>
          <rel>207095</rel>
        </package>
        <package ID="ESX-CLIENT-204907">
          <name>viclient</name>
          <version>2.5.0</version>
          <rel>204907</rel>
        </package>
        <package ID="ESX-TOOLS-207095">
          <name>tools</name>
          <version>3.5.0</version>
          <rel>207095</rel>
        </package>
      </installed-packages>
    </query-response>
    /vmfs/volumes/525300ce-5ff6ad3d-e2ed-0014222aedb7/Patches/ESXe350-201302401-O-SG #
    ... is there any further update for this system? I believe so as the Heartbleed patch etc. was not around when I was installing this server back in 2010.

    Hello Richardson Porto,
    I wanted to tell you that I appreciate the help so far.
    Also wanted to point out to you, that the KB indicated above is older than Update 5, which from your instructions is what I have installed. That KB is for U2.
    Now, the document definitely has step by step instructions on installing, querying etc. But my problem is ... NOT ALL COMMANDS WORK FOR ME!
    This is why I am here because all the instructions I have been reading does not work with my flavor of ESX 3.5.0, 207095... WHY? It has me stumped.
    For example, here are some commands the doc asked me to do and they failed: (Note that I had to unzip the folder on my windows box and upload it to /tmp using vSphere Client)
    /tmp # ls
    ESX350-201302402-BG      ESX350-201302402-BG.zip  vmhsdaemon-0
    /tmp # unzip ESX350-201302402-BG.zip
    -ash: unzip: not found                                                                                          -----------------------THIS COMMAND WAS NOT FOUND ?
    /tmp # cd ESX350-201302402-BG
    /tmp/ESX350-201302402-BG # esxupdate info
    Invalid command info                                                                                          -----------------------THIS COMMAND WAS INVALID ?
    /tmp/ESX350-201302402-BG # esxupdate update                                       -----------------------NOTHING HAPPENED HERE ?
    /tmp/ESX350-201302402-BG # ls -lh
    -rw-------    1 root     root       321.3k Dec 13 15:24 VMware-esx-scripts-3.5.0-988599.i386.rpm
    -rw-------    1 root     root         1.6k Dec 13 15:24 contents.xml
    -rw-------    1 root     root          701 Dec 13 15:24 contents.xml.sig
    -rw-------    1 root     root         1.4k Dec 13 15:24 descriptor.xml
    drwxr-xr-x    1 root     root          512 Dec 13 15:24 headers
    /tmp/ESX350-201302402-BG #
    NOTE: All these commands were run sequentially and I just copied and paste it from my SSH Client (PuTTy.exe)
    Is there a toolkit I need to install to have these commands or what really am I missing here? Host is in Maintenance Mode and the 1 VM that's on it is off!
    I am going to start a new discussion with this NEW ISSUE, since the Heading of this DISCUSSION has already been SOLVED! Thanks again!

Maybe you are looking for