BExAnalyzer Pop-Up messages log?

Hi All,
I am responsible for the administration of our BI System. Currently we are providing all of our Queries via an Excel Workbook , because its easier for the enduser. If an Query is adapted the user gets an Pop Up Message with the Info Message that the Query has been changed.
My Question is: Are these messages logged somewhere? Or Can i trigger a message as an email to me if an user gets some kind of Popup after opening a Query or an workbook?
Its very Confusing for our enduser and i need to be informed if such an message is displayed.
Thank you
Best regards
Tobias

Seems like something went south in your installation. I would recommend deactivating, uninstalling, running the cleanscript to remove anything left over and reinstalling.
http://www.adobe.com/support/contact/cscleanertool.html

Similar Messages

How to log "send failed" to a file instead of showing a pop-up message

Hi, I am working with Flex 4.1 on Linux but I suppose this problem must be common to all versions of Flex.
I am working on a Flex client front-end which connects to a Java back-end (in Tomcat) via BlazeDS. All of this works OK 99.9% of the time. However, from time to time (let's say, if the client browser has been open for several hours), the user gets a pop-up message saying "Send failed". It seems to be a harmless transient error -- if the user closes the pop-up, the front-end carries on as usual and seems to continue to work as expected.
Is there a way to have the "send failed" message written to a log file instead of opening a pop-up message?
As a separate problem, if anyone has seen occasional, transient "send failed" errors, I would be interested to hear about that. If you have some solution to make them go away, that would be terrific.
Thanks for your time, I appreciate your help.
Robert Dodier

Firefox since 20.0 has had the current download history way it is now. It was possible to enable the old manager up until Firefox 26.0 was released.
One way to have Downloads in a tab is to use '''about:downloads''' in a tab which can be found in the about: urls list about:about

Pop-up with Message Log and ability to correct

Hi All,
I am working on a Dialog Program which gets the messages that occur on validating the fields of this program into a message table.
I am able to display the messages one after the other by looping through the message table.
Is there a way that I could display a pop-up with the Message Log and provide a button ('Correct Errors') there to correct the errors encountered which (when clicked) would take me to the field responsible for that message, while the message appears in the status bar.
Many Thanks in Advance.
Kind Regards
Sanjay

Hi,
you can use FM POPUP_TO_DECIDE to display error message and 2 buttons (one with "Correct Errors" and other "Cancel") and "SET CURSOR FIELD CURSORFIELD" to positionate in the respective field (that you must associate to the message)
Example:
CALL FUNCTION 'POPUP_TO_DECIDE'
EXPORTING
    DEFAULTOPTION           = '1'
    TEXTLINE1               = 'Message Text'
TEXTLINE2               = ' '
TEXTLINE3               = ' '
    TEXT_OPTION1            = 'Correct Errors'
    TEXT_OPTION2            = 'Cancel'
ICON_TEXT_OPTION1       = ' '
ICON_TEXT_OPTION2       = ' '
    TITEL                   = 'Error Log'
START_COLUMN            = 25
START_ROW               = 6
CANCEL_DISPLAY          = 'X'
IMPORTING
   ANSWER                  = answer.
if answer eq '1'.
*Correct Errors
SET CURSOR FIELD CURSORFIELD.
MESSAGE Ennn.
else.
*Cancel
endif.
Regards,

Keep getting pop-up message re updating RSS feed for twitter

Please advise why I get this pop-up message. After I get it and fill in the info, I get another pop-up message asking for the same info, which doesn't take. What's going on? My Safari version is 4.1 (4533.16)
Enter your name and password to update the RSS feed.
To update the RSS feed “Twitter / mimbrava with friends”, you need to log in to the area “Twitter API” on twitter.com. Your password will be sent in clear text.
Name:
Password:
_ Remember this password in my keychain
Cancel Log In

Ok...
From your Safari Menu Bar click Safari / Preferences then select your Security tab.
Click: Show Cookies. Delete all Twitter cookies.
And in the Preferences pane select the RSS tab. Click: Check for updates. Select: Never
Restart your Mac.
See what happens when one is a senior citizen, Carolyn? You've got a great memory!
It rang a bell. I've never seen this behavior before with pop ups from Twitter. Interesting...

I try to turn off "find my iphone" and when i turn it off a pop up message apper to enter my apple id password and this is not may apple id i want to change it so i can turn it off

I try to turn find my iphone and to enter the password a pop up message appear to enter my apple idpassword but it isnt my apple id . How to change it and enter my apple id

Go to Settings>icloud, scroll to bottom of screen and tap Delete Account. Then log in using a different ID.

How do I remove the pop up on log in We do not support community tool bar on this version of safari?

How do I remove the pop up message on Safari log in, we do not support this version of community tool bar ?

Your problem is with the Community Toolbar.
It's a terrible app/plugin that messes up Macs like the plague.
Did you ever install a customized toolbar? Like a Facebook one? Or for watching sports?
Here's how to search and destroy:
Close Safari.
Check here for CT Loader
Locate and delete:
HD/Library/Application Support/Conduit
HD/Library/InputManagers/CTLoader
HD/Library/Receipts/ctloader.pkg
HD/Library/Receipts/<Toolbar name>.pkg
HD/Library/Application Support/SIMBL/Plugins/CT2285220.bundle
HD/Users/<User name>/Library/Application Support/Conduit
It may not be in every single location, but get it out where ever you find it.
Restart Safari. Any Better?

Blank pop-up messages

Hi All,
I purchased my iMac i5 in June 2011.
Since day one, whenever a pop up message appears, it comes up blank and it's driving me INSANE! See image below.
I have no possible way of seeing what this is actually asking me to do.
When I install a new application, the password block that pops up is also blank. The only reason I know it's asking me for a password is because there is a space to type something..
ARGH!!!!
Can someone please tell me what's going on and if I can fix it??

Please read this whole message before doing anything.
This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
Step 1
The purpose of this step is to determine whether the problem is localized to your user account.
Enable guest logins and log in as Guest. For instructions, launch the System Preferences application, select Help from the menu bar, and enter “Set up a guest account” (without the quotes) in the search box.
While logged in as Guest, you won’t have access to any of your personal files or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. Same problem(s)?
After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
Note: If you’ve activated FileVault in Mac OS X 10.7 or later, then you can’t enable the Guest account. Create a new account in which to test, and delete it, including its home folder, after testing.
Step 2
The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. The instructions provided by Apple are as follows:
Be sure your Mac is shut down.
Press the power button.
Immediately after you hear the startup tone, hold the Shift key. The Shift key should be held as soon as possible after the startup tone, but not before the tone.
Release the Shift key when you see the gray Apple icon and the progress indicator (looks like a spinning gear).
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem(s)?
After testing, reboot as usual (i.e., not in safe mode.) Post the results of steps 1 and 2.

Needs pop up message to occur on screen when data ia manipulated...

Hi
In my application(forms 6i/oracle9i), I want pop up message to occur on the screen of application user A when another application user B manipulates the data. Message would be like '2 rows are updated in Branch Master'. Then there should be availabilty( currently from his screen itself) to user A to see those manipulations being done by user B.
Pop up message should occur in following cases
case 1: Just after User A log in to the Application i.e. all master data changes being done after he has logged out the application.
Case 2: During his session i.e. when he is using application, and in case there are changes to the Master Tables being done by other user.(this time pop up should come on the screen on which user is working.)
I am keeping the log of data changes in Audit_Trail_Log table through trigger.
Secondly, application keeps the login time of users in app_login_status. And logout time in app_login_logout_log table.
I hope you get my requirements. Thanks in advance.

can you try the following things:
Case 1
-- Count the number of inserts after the logout time of user
select count(*) from audit_trail_log where
statement_column like '%INSERT%'
and user<>user
and time_column>=(select max(logouttime) from app_login_logout_log where user=user);
-- Count the number of deletions after the logout time of user
select count(*) from audit_trail_log where
statement_column like '%DELETE%'
and user<>user
and time_column>=(select max(logouttime) from app_login_logout_log where user=user);
-- Count the number of updates after the logout time of user
select count(*) from audit_trail_log where
statement_column like '%UPDATE%'
and user<>user
and time_column>=(select max(logouttime) from app_login_logout_log where user=user);
ADD ALL THREE OF THEM. Put it in a variable. Say sum_updates
On when new form instance, write
message('Number of updates since last login : '||sum_updates);
synchronize;
Case 2
create a timer and in when timer expired trigger write the same code as in when new form instance. Put the sum in sum_updates2
find the difference diff_updates := sum_updates2-sum_updates
and in WHEN-TIMER-EXPIRED write:
if diff_updates<>0 then
message('Number of updates in the database in this session : '||diff_updates);
synchronize;
end if;
I guess, you understand the logic.
P.S : Not tested !!

Mac Mail Pop Up Message

I recently reactivated my Road Runner cable internet service after a four month hiatus. As far as I know all my Preferences for the email account were the same as when I shut off the service in June. All I changed was under Advanced Tab where I checked the Enable Acct. box. When I open Mac Mail I get the following pop up message:
The mailbox “~/Library/Mail/[email protected]/Deleted Messages.mbox” is currently locked by “John Cuddeback” on host “cpe-66-25-148-214.austin.res.rr.com”. If you open a mailbox that already is in use, you may damage its contents.
If I select the Open Anyway radio button, I can go the one of the mail boxes where a new message is indicated and open the box and see the mail. However, I keep getting additional copies of the email every time the Mac Mail checks the Road Runner server. The only way I can stop getting copies of the same email is to go to the Road Runner server and delete them.
I have contacted the ISP and when I say Mac they start scratching various parts and say check with apple.com. Any suggestions??

First off, I suggest you not post this kind of
account info in the clear in a public forum for
security & anti-spam reasons.
Regarding the message itself, do you have the web
mail interface for this account open at the same time
you are using Mail to access the account? Have you
logged out of the web mail version before using Mail?
It sounds like some other client app or possibly the
web mail interface has opened a session with the
account & hasn't closed it, preventing Mail from
setting its own lock with the server for its own
session.
Thanks. I just went into Road Runner and changed all the account passwords then made corresponding changes in the Mail Account passwords. This seems to have worked.
iMac G4

BRF+ Message Log & "Rule as Expression"

Hi colleagues,
I am quite new to BRFplus and have two questions:
1) I would like to use a message log action in order to indicate errors. I tried to follow https://wiki.wdf.sap.corp/wiki/display/FDT/Message+Log with method SET_APPLICATION_LOG_OBJECT, but I can't find the class this method belogns to. I also tried modelling a rule & action message log with help of the UI. My question is how can I log messages and where can I find them after the function is beeing processed?
2) In every guide I can read something about rule expressions and even how to create them (e.g. http://help.sap.com/saphelp_nw70ehp1/helpdata/en/cc/85414842c8470bb19b53038c4b5259/frameset.htm), but in the workbench there is no possibilty of creating rules as expressions but only rules and rulesets (the rule is not part of the "Expression" node).
I hope somebody knows what I mean
Thanks a lot & kind regards,
Ilijana

Thanks a lot for your response!
Could you tell me why using rules and rulesets is not recommended for 7.01 ? This could be interesting for my bachelor thesis.
Thanks & Kind Regards,
Ilijana

CK40N : no message log update after =cksu

Hi costing experts,
In the costing run statistics there are errors for the marking step, which I correct by entering =cksu according to SAP note 542790.
However, the message log for the marking step is not updated. It is hard to find which are the remaining messages in the overall message log, because there are some 400 messages in total and only 50 are still relevant according to the refreshed statistics.
Does anyone have any idea's about what can be done to update the message log?
Thanks,
Caroline.

I got below error in the ST22 dump....
"Database error text........: "ORA-00060: deadlock detected while waiting for
resource"
Internal call code.........: "[RSQL/INSR//BIC/FZXX_C02 ]"
I was searching for OSS notes associated with following keywords and note able to find any notes related my support pack level we are in SP13 (SAPKW70013)
"DBIF_RSQL_SQL_ERROR" "CX_SY_OPEN_SQL_DB" "WRITE_ICFACT"
Any help will be greatly appreciated...
Thanks,
Raman

How can I create a pop up message in MULTILINE on WEB GUI?

Hi Experts,
I have gone through several thread to search if I can write pop up message in more than in one line.
for example...
title: continue ?
SDD no12366
customer name: abc ltm
lines: 2 lines records
gr_pers_popup = comp_controller->window_manager->create_popup_2_confirm(
                    iv_title = 'CAUTION - Continue Import ?'
                    iv_text = lv_text "'SDD-1234676; Cust - ABSOLUTE GLASS WORKS; Lines - 2'
                    iv_btncombination = if_bsp_wd_window_manager=>co_btncomb_yesno
    gr_pers_popup->open( ).
    gr_pers_popup->set_on_close_event( iv_event_name = 'Confirm' iv_view = me ).
Please advise, if any work around available to display multiple line on pop_up_confirm text on WEB UI .
Thanks in advance.

Multiline messages cannot be shown on standard Pop Up. In case you need multiline messages then create a new view, use it as a pop up and then you can show text messages as per the business requirement.
The blog mentioned above (http://wiki.sdn.sap.com/wiki/display/CRM/CallingCustomcomponentaspopupfromastandardcomponentinCRMWEBUI-Part+2) will definately help you
Rg,
Harshit

A pop-up message is frozen on my settings page. I was trying to set up an apple id for iTunes when I got a message "required fields have been left blank. The missing information is highlighted in red." the ok button doesn't work. 1st gen iPad.

A pop-up message is frozen on my settings page. I was trying to set up an apple id for iTunes when I got a message "required fields have been left blank. The missing information is highlighted in red." the ok button doesn't work. The message is now fixed & I cannot get rid of it. Ironically, when I found this forum I was able to set up an apple Id. Please advise how to get rid of the pop-up box. Thanks!

I'm having this same problem as well and cannot advance--very irritating. All of the information is filled out correctly and I've editted my AppleID information online separately as well to get around this issue, but no luck...

Message log not correctly associated with contact

I'm having an issue where I cannot text message a particular contact or phone number. A series of steps I took seems to have exposed a glitch where the message log will not corrrectly associate itself to a newly created contact. So now when I push the SMS button on the new contact, nothing happens. Also when I manually start a new text message and add the contact to the text message and press send, the message clears from the text box and nothing else happens.
Here is how you reproduce the error:
1. I called a number and quickly hung up, just as you would do to log a number for saving later.
2. From the call log, I clicked on the SMS button to send a text message.
3. I sent a text message.
4. From the text message log, I clicked on the number at the top to save it to contacts.
5. I saved a new contact with the number.
6. If you go back to the message log, you should notice that the message log header does not update with the new contact's name. Instead it will still show the number.
7. Finally, I went to the test contact and pressed the SMS button and nothing happens.
After you add the contact like I did, it seems that the contact does not correct connect itself with the message log.
After step 5, go to the message log and click on the message log header which should still be the number. When you do this, you would think it would open up the new test contact info card, but instead it opens up a new contact card, as if the number is not saved to a contact yet. It gives me the option to Add To Contacts at the bottom.

I have the same issue. I started not being able to text only one person. I go to the contact and click on the "SMS" button and it doesn nothing. If I try to send the message directly to the number it just doesn't do anything, the message leaves the text box, but doens't show up in the conversation window. I'm not exactly sure what I did to do this, but I think it's because I added the same contact twice. Once from my incoming calls, and once from my outgoing texts. I've tried deleting all references to this number (ie the contact info, incoming/outoing calls and texts) but nothing has worked. It must be the corrupt contact thing as well.

Message log is not getting deleted in WEBUI (BADI ORDER_SAVE)

Hi,
I am displaying an error message based on certain conditions in BADI: ORDER_SAVE (CHECK_BEFORE_SAVE). On getting error, I am correcting that error.
Using CRM_MESSAGE_DELETE, I am deleting error message before displaying new error message. However, my error log is not going away. It is still displaying in the log in WEBUI.
Could you please help me out, how can I delete error message, and error log from WEBUI.
Thanks,
Sandeep

I have the same question as you .
   I have use folleing code to display message in web ui:
      if (conditions).
      CV_OWN_MESSAGE = 'X'.
      MESSAGE '商机描述已经存在，请修改后再保存！' type 'E' RAISING DO_NOT_SAVE .
    endif.
but when i have edit the description , the Message log is not getting deleted in WEBUI .
who can tell me , thanks for all your help !

BExAnalyzer Pop-Up messages log?

Similar Messages

Maybe you are looking for