BexWAD (BuisnessExplorerWebApplicationDesigner), - RSBOLAP MessageNumber 17 error

Hi All ,
In BexWAD (BuisnessExplorerWebApplicationDesigner), When i input Query , i am getting Below Error
After doubleclicking on that message number, I am getting the below screen
When i checked SAP Note# 888687, nothing has been resolved.
When i cheked in NWA Link in (log and Traces), i am getting below Error.
Error:
Full Message Text
Cannot load login module class com.sap.ctsc.WebsphereEpSso.
Location: com.sap.engine.services.security
Application: sap.com/tc~wd~dispwda
Please tel how to resolve above error
Regards,
gayathri.K

Hello Gayathri,
I know how to resolve this.
http://hostname:50100/irj/servlet/prt/portal/prteventname/HtmlbEvent/prtroot/com.sap.ip.bi.supportdesk.default
use the above link to login into support desk, provide login credentials, in the next page u will the see the errors with details and relevant SAP Notes, if you have basis experience, you can solve it, otherwise u have contact them. Sometimes the error occurs if J2EE_ADM (Standard SAP user) is locked.
And the configuration needs to be done in Visual Administrator.
KR,
MD

Similar Messages

ABEND RSBOLAP (000): Program error in class SAPMSSY1 method : UNCAUGHT_EXCE

Hello,
A BI Report contains a field "X" & a field "Y".
Y is a sub part of X. Means on clicking upon X, Y opens.
This report runs on date basis. For each date Y contains Zero value, but in the result Y contains some value greater than zero.
Now when i execute this report in Portal, clicking on X for the dates opens up Y.
But in the result column, Clicking on X giveg the following error:
Root Cause
The initial exception that caused the request to fail was:
Termination message sent
ABEND RSBOLAP (000): Program error in class SAPMSSY1 method : UNCAUGHT_EXCEPTION
MSGV1: SAPMSSY1
MSGV3: UNCAUGHT_EXCEPTION
Pl. note that this report is running fine in BEx analyer & not giving any such error.
Thanks & Regards

In SE 38 run RSPOR_SETUP and see if all the 12 steps are ok, as I see this is a an issue with java server not able to commute with BI., you need to exchange java certificates to BI and vise versa.,(basis can do this step)
Hope this helps.,

RSBOLAP 000 and RS_EXCEPTION 105 ERROR in BW

Hello SAP Guru,
I am using BI 7.X(Based on 7.10)
Support Package 9, Patch 1
Revision 1507
When I am using the filter in Bex for DATE,DIVISION and DISTRIBUTION CHANNEL, I am getting the following error.
RSBOLAP 000 Program error in class SAPMSSY1 Method : Uncaught_Exceptiomn
RS_EXCEPTION 105 Error in BW.
Where as for others filter I am not getting any error.
Please any one let ´me know what is the reason
Thanks in advance.
With regards,
Anand Kumar

Hi
Please implement the notes below in your system. These notes should help you.
1398358 Error:CL_RSDM_READ_MASTER_DATA and form __FILL_ATTR_INFO-06-
1452121 Error:CL_RSDM_READ_MASTER_DATA and form __FILL_ATTR_INFO-06-
Best Regards,
Rafael

ABEND RSBOLAP (000): error in class SAPMSSY1 method - after report move Pro

Hi Guys,
We recently moved a report to production and got the following error (500 Internal Error) when executing from Query designer
ABEND RSBOLAP (000): Program error in class SAPMSSY1 method : UNCAUGHT_EXCEPTION
MSGV1: SAPMSSY1
MSGV3: UNCAUGHT_EXCEPTION
I saw in one of the threads to run the Program RSPOR_SETUP and see if all the 12 steps are ok and they are not but they are not ok in Dev and Qua as well where its running fine. Appreciate if somebody can advise.

Hi,
Check your Query in RSRT properties tab and make necessary settings.
Do OLAP check in RSCRM_BAPI t-code. It will show the inconsistencies in your query.......
Regards,
Suman

Error while opening the report.

hi,
Some time i am getting "500 Internal Server Error',while executing the report.Please check the following exception and give the possible reason for getting this kind of problem.
 500 Internal Server Error
BEx Web Application
Failed to process request. Please contact your system administrator.
Error Summary
While processing the current request, an exception occured which could not be handled by the application or the framework.
If the information contained on this page doesn't help you to find and correct the cause of the problem, please contact your system administrator.
To facilitate analysis of the problem, keep a copy of this error page. Hint: Most browsers allow to select all content, copy it and then paste it into an empty document (e.g. email or simple text file).
Root Cause
The initial exception that caused the request to fail, was:
Termination message sent
ABEND RSBOLAP (000): Program error in class SAPMSSY1 method : UNCAUGHT_EXCEPTION
MSGV1: SAPMSSY1
MSGV3: UNCAUGHT_EXCEPTION
com.sap.ip.bi.base.application.exceptions.AbortMessageRuntimeException: Termination message sent
ABEND RSBOLAP (000): Program error in class SAPMSSY1 method : UNCAUGHT_EXCEPTION
MSGV1: SAPMSSY1
MSGV3: UNCAUGHT_EXCEPTION
at com.sap.ip.bi.base.application.message.impl.MessageManager.addMessageInternal(MessageManager.java:148)
at com.sap.ip.bi.base.application.message.impl.MessageManager.addMessage(MessageManager.java:113)
Messages
ABEND: Program error in class SAPMSSY1 method : UNCAUGHT_EXCEPTION
ABEND: Error in BW:
System Environment
Server
BI Java Release: 7 - Patch level: 0000000009 - Description: BI Web Applications Java - Additional info: - Production mode: true
BI ABAP Release: 700 - Patch level: 0009 - Description: SAP NetWeaver BI 7.0 (BIPCLNT300) - Additional info: - Production mode: true
Java Virtual Machine Classic VM - IBM Corporation - 1.4.2
Operating System AIX - ppc64 - 5.3
Context
ACCESSIBLE false
BEx Runtime Version 1
CACHE true
CONTENT_PADDING true
COUNTRY
DEBUG false
DEBUG_LEVEL 0
DEBUG_MESSAGES false
Initial Query String BUILDTREE=false&NAVIGATIONTARGET=navurl%3A%2F%2F7b8b73fe5fd57ae6c5c1a24aed5d1ac4&NAVPATHUPDATE=false&RELATIVENAVBASE=&SAP-LAFVERSIONS=portal%3A7.0.9.0.1%3Bur%3A7.0.9.0.1&SAP-PP-CONSUMERBASEURL=3A80&SAP-PP-PRODUCERID=com.lenovo.BIP_Lenovosap&TEMPLATE=Z_WEB_CR_ZCRMOPPI_Q0032&THEME=LenovoBlueTwo
LANGUAGE en
Master System Alias BIPCLNT300
PROFILING false
RTL false
Request URL http
SAP_BW_IVIEW_ID pcd:portal_content/d029033/com..BI_Reports/com.BI_Analytics/Z_WEB_CR_ZCRMOPPI_Q0032
SAP_EXTERNAL_SID CLGF6EORaEN7Vivt8TVaQw==3eTBxzbQZSMLxB4o3h9+7w==
THEME_NAME LenovoBlueTwo
TRACE false
TRAY_TYPE PLAIN
Time Thu Oct 04 03:14:20 PDT 2007
User EPSUPPORT (USER.R3_DATASOURCE.EPSUPPORT)
Full Exception Chain
Log ID 00145ED13086005200000889000C719A00043BA80CB04B89
com.sap.ip.bi.webapplications.runtime.controller.MessageException: Error during conversion of the Web template "Z_WEB_CR_ZCRMOPPI_Q0032 from the master system at com.sap.ip.bi.webapplications.runtime.impl.Page.processRequest(Page.java:2055) at com.sap.ip.bi.webapplications.runtime.controller.impl.Controller.doProcessRequest(Controller.java:841) at com.sap.ip.bi.webapplications.runtime.controller.impl.Controller.processRequest(Controller.java:775) at com.sap.ip.bi.webapplications.runtime.jsp.portal.services.BIRuntimeService.handleRequest(BIRuntimeService.java:412) at com.sap.ip.bi.webapplications.runtime.jsp.portal.components.LauncherComponent.doContent(LauncherComponent.java:21) at com.sapportals.portal.prt.component.AbstractPortalComponent.serviceDeprecated(AbstractPortalComponent.java(Compiled Code)) at com.sapportals.portal.prt.component.AbstractPortalComponent.service(AbstractPortalComponent.java(Compiled Code)) at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java(Compiled Code)) at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java(Compiled Code)) at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java(Compiled Code)) at com.sapportals.portal.prt.component.PortalComponentResponse.include(PortalComponentResponse.java(Compiled Code)) at com.sapportals.portal.prt.pom.PortalNode.service(PortalNode.java:646) at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java(Compiled Code)) at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java(Compiled Code)) at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java(Compiled Code)) at com.sapportals.portal.prt.core.PortalRequestManager.runRequestCycle(PortalRequestManager.java:753) at com.sapportals.portal.prt.connection.ServletConnection.handleRequest(ServletConnection.java:240) at com.sapportals.portal.prt.dispatcher.Dispatcher$doService.run(Dispatcher.java(Compiled Code)) at java.security.AccessController.doPrivileged1(Native Method) at java.security.AccessController.doPrivileged(AccessController.java(Compiled Code)) at com.sapportals.portal.prt.dispatcher.Dispatcher.service(Dispatcher.java(Compiled Code)) at javax.servlet.http.HttpServlet.service(HttpServlet.java(Compiled Code)) at com.sap.engine.services.servlets_jsp.server.servlet.InvokerServlet.service(InvokerServlet.java(Compiled Code)) at javax.servlet.http.HttpServlet.service(HttpServlet.java(Compiled Code)) at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java(Compiled Code)) at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java(Compiled Code)) at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java(Inlined Compiled Code)) at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java(Compiled Code)) at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java(Compiled Code)) at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java(Compiled Code)) at com.sap.engine.services.httpserver.server.Client.handle(Client.java(Inlined Compiled Code)) at com.sap.engine.services.httpserver.server.Processor.request(Processor.java(Compiled Code)) at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java(Compiled Code)) at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java(Compiled Code)) at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java(Compiled Code)) at java.security.AccessController.doPrivileged1(Native Method) at java.security.AccessController.doPrivileged(AccessController.java(Compiled Code)) at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java(Compiled Code)) at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java(Compiled Code))Caused by: com.sap.ip.bi.base.exception.BIBaseRuntimeException: Error during conversion of the Web template "Z_WEB_CR_ZCRMOPPI_Q0032 from the master system at com.sap.ip.bi.webapplications.runtime.jsp.portal.service.template.PortalTemplateAccessService.getTemplateContent(PortalTemplateAccessService.java:93) at com.sap.ip.bi.webapplications.runtime.preprocessor.Preprocessor.parseTemplate(Preprocessor.java:161) at com.sap.ip.bi.webapplications.runtime.xml.XmlTemplateAssembler.doInit(XmlTemplateAssembler.java:81) at com.sap.ip.bi.webapplications.runtime.template.TemplateAssembler.init(TemplateAssembler.java:118) at com.sap.ip.bi.webapplications.runtime.base.Template.doInit(Template.java:105) at com.sap.ip.bi.webapplications.runtime.base.PageObject.init(PageObject.java:232) at com.sap.ip.bi.webapplications.runtime.base.Container.init(Container.java:46) at com.sap.ip.bi.webapplications.runtime.impl.Page.initPageObject(Page.java:3226) at com.sap.ip.bi.webapplications.runtime.impl.Page.createPageObject(Page.java:3427) at com.sap.ip.bi.webapplications.runtime.impl.Page.setTemplate(Page.java:4355) at com.sap.ip.bi.webapplications.runtime.impl.Page.doSetTemplateCommand(Page.java:4091) at sun.reflect.GeneratedMethodAccessor293.invoke(Unknown Source) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java(Compiled Code)) at java.lang.reflect.Method.invoke(Method.java(Compiled Code)) at com.sap.ip.bi.util.MethodInvoker.callMethod(MethodInvoker.java:101) at com.sap.ip.bi.webapplications.runtime.command.CommandProcessorHelper.processCommand(CommandProcessorHelper.java:410) at com.sap.ip.bi.webapplications.runtime.command.CommandProcessorHelper.processCommand(CommandProcessorHelper.java:325) at com.sap.ip.bi.webapplications.runtime.base.CommunicationProcessor.processCommand(CommunicationProcessor.java:144) at com.sap.ip.bi.webapplications.runtime.impl.Page.processCommandInternal(Page.java:1418) at com.sap.ip.bi.webapplications.runtime.impl.Page.processCommandSequence(Page.java:1713) at com.sap.ip.bi.webapplications.runtime.impl.Page.doProcessRequest(Page.java:2424) at com.sap.ip.bi.webapplications.runtime.impl.Page.processRequest(Page.java:1977) ... 38 moreCaused by: com.sap.ip.bi.deploytime.BIBaseRareSystemException: BI runtime subsystem error: Retrieve MetadataResources Failed1.4.2com.sap.ip.bi.deploytime.metadataresourcecache.MetadataResourceCache:initialize Note call hierarchy at com.sap.ip.bi.deploytime.metadataresourcecache.MetadataResourceCache.initialize(MetadataResourceCache.java:212) at com.sap.ip.bi.deploytime.BISP2Jsp.transformDTT(BISP2Jsp.java:1130) at com.sap.ip.bi.deploytime.BISP2Jsp.convert(BISP2Jsp.java:497) at com.sap.ip.bi.webapplications.runtime.jsp.portal.service.template.PortalTemplateAccessService.getTemplateContent(PortalTemplateAccessService.java:88) ... 59 moreCaused by: com.sap.ip.bi.base.application.exceptions.AbortMessageRuntimeException: Termination message sent ABEND RSBOLAP (000): Program error in class SAPMSSY1 method : UNCAUGHT_EXCEPTION MSGV1: SAPMSSY1 MSGV3: UNCAUGHT_EXCEPTION at com.sap.ip.bi.base.application.message.impl.MessageManager.addMessageInternal(MessageManager.java:148) at com.sap.ip.bi.base.application.message.impl.MessageManager.addMessage(MessageManager.java:113) at com.sap.ip.bi.base.application.message.impl.MessageManager.addMessageInternal(MessageManager.java:144) at com.sap.ip.bi.base.application.message.impl.MessageManager.addMessage(MessageManager.java:113) at com.sap.ip.bi.base.application.service.RfcService.fillMessages(RfcService.java:221) at com.sap.ip.bi.base.application.service.RfcService.doPostProcessing(RfcService.java:171) at com.sap.ip.bi.base.application.service.rfcproxy.impl.RfcFunction.execute(RfcFunction.java(Compiled Code)) at com.sap.ip.bi.deploytime.service.validation_metadata.impl.ValidationMetadataService.getTransformData(ValidationMetadataService.java:53) at com.sap.ip.bi.deploytime.metadataresourcecache.MetadataResourceCache.initialize(MetadataResourceCache.java:196) ... 62 more
Regards,
Ravi.M

hi,
 Any suggestion for the above query.
here i am using federated portal concept,once i am opening this report in the portal only i am facing the above problem.
Regards,
Ravi.M

Query throws an error while drilldowning a particular column in production

Hello Gurus,
There is an issue in a query when I run it on portal and when I try to drill down one particular column, it throws an error. I am pasting the error message below for your reference. This query works fine when I run in Bex. It also works fine when I run it on Quality portal. It only throws an error when I run it on production portal. I have got the patches and PI checked with BASIS team, everything seems to be fine.
Please help me out with this issue.
Termination message sent
ABEND RSBOLAP (000): Program error in class SAPMSSY1 method : UNCAUGHT_EXCEPTION
MSGV1: SAPMSSY1
MSGV3: UNCAUGHT_EXCEPTION
com.sap.ip.bi.base.application.exceptions
ABEND: Program error in class SAPMSSY1 method : UNCAUGHT_EXCEPTION
ABEND: System error in program SAPLRRK0 and form LRECH_01-01- (see long text)
Regards,

Hi,
There are a couple of threads on the same issue.
Refer to these, just might be handy.
Re: Uncaught_exception in Report Designer
Program error in class SAPMSSY1 method : UNCAUGHT_EXCEPTION in Report
Good Luck!
Sandeep Tudumu

Error while executing query on portal-SAPMSSY1 method : UNCAUGHT_EXCEPTION

Hello all,
I have created a quey and executed it on portal and everything just works fine. The query has few input varaibles at the start like fiscal year and some other inputs. I saved the query in my Portal favorites and then when I try to excute it from there it gives me a runtime BI error.
Termination message sent ABEND RSBOLAP (000): Program error in class SAPMSSY1 method : UNCAUGHT_EXCEPTION MSGV1: SAPMSSY1 MSGV3: UNCAUGHT_EXCEPTION
I guess it errors out because of the variable input part at the start of query.
We already have note "950992" in the system so wonder what next now.
Any inputs appreciated.
Thanks,
Kiran

We are having the same issue too - we are SP13. Our query is built on a Infoset, and the problem comes with 0FISCPER variable, when we try to do a input help (F4) in Bex. this happens only when I use fiscper on queries bulit on INFOSETS, and it works perfectly alright with all other cubes.
System error in program CL_RSMD_RS_SPECIAL and form
IF_RSMD_RS~READ_META_DATA-02 (see long text)
 Message no. BRAIN299
Diagnosis
 This internal error is an intended termination resulting from a program
 state that is not permitted.
Procedure
 Analyze the situation and inform SAP.
 If the termination occurred when you executed a query or Web template,
 or during interaction in the planning modeler, and if you can reproduce
 this termination, record a trace (transaction RSTT).
 For more information about recording a trace, see the documentation for
 the trace tool environment as well as SAP Note 899572.
and in portal, it gets to the point of variable screen and then throws a error msg.
ABEND RSBOLAP (000): Program error in class SAPMSSY1 method : UNCAUGHT_EXCEPTION
MSGV1: SAPMSSY1
MSGV3: UNCAUGHT_EXCEPTION
Message was edited by:
 voodi
Message was edited by:
 voodi

ABEND RS_EXCEPTION (105): Error in BW: error creating tmp table

Hello Experts,
We have recently upgraded to EHP1 from BI 7.0. After that I have applied executed the report SAP_DROP_TMPTABLES as per the note 1139396.
When we run reports, we are getting error "ABEND RS_EXCEPTION (105): Error in BW: error creating tmp table
MSGV1: error creating tmp table".
Please let me know if any one faced the same problem.
Thanks,
Venkatesh

Hello Colum,
Thanks for the reply. I have done recommendations the issue resolved.
But few reports giving the below error.
ABEND RSBOLAP (000): Program error in class SAPMSSY1 method :
UNCAUGHT_EXCEPTION
MSGV1: SAPMSSY1
MSGV3: UNCAUGHT_EXCEPTION
Can you please help to resolve the issue?
Thanks,
Venkatesh

Getting Strange Error Running Query After Partioning Cube

I am using BI 7.0, Service Pack 11:
I just partitioned a cube. I hav eorginal cube XFI_C001 and create a new cube C2_XFIC01 by copying from XFI_C001. Now I developed a query on C2_XFIC01. Similar query on XFI_C001 does not give any error. How can I debug this problem? Error reported when running query is shown below. I ran ST22, no dump. I did SM50, looked at developer trace, no clue.
The initial exception that caused the request to fail was:
Termination message sent
ABEND RSBOLAP (000): Program error in class SAPMSSY1 method : UNCAUGHT_EXCEPTION
MSGV1: SAPMSSY1
MSGV3: UNCAUGHT_EXCEPTION
com.sap.ip.bi.base.application.exceptions.AbortMessageRuntimeException: Termination message sent
ABEND RSBOLAP (000): Program error in class SAPMSSY1 method : UNCAUGHT_EXCEPTION
MSGV1: SAPMSSY1
MSGV3: UNCAUGHT_EXCEPTION
at com.sap.ip.bi.base.application.message.impl.MessageManager.addMessageInternal(MessageManager.java:148)
at com.sap.ip.bi.base.application.message.impl.MessageManager.addMessage(MessageManager.java:113)
Detailed Exception is:
com.sap.ip.bi.base.exception.BIBaseRuntimeException: Error while generating HTML
 at com.sap.ip.bi.webapplications.ui.items.UiItem.render(UiItem.java:365)
 at com.sap.ip.bi.webapplications.runtime.rendering.impl.ContainerNode.render(ContainerNode.java:63)
 at com.sap.ip.bi.webapplications.runtime.rendering.impl.PageAssemblerRenderingRoot.processRendering(PageAssemblerRenderingRoot.java:52)
 at com.sap.ip.bi.webapplications.runtime.impl.Page.processRenderingRootNode(Page.java:3565)
 at com.sap.ip.bi.webapplications.runtime.impl.Page.processRendering(Page.java:3280)
 at com.sap.ip.bi.webapplications.runtime.impl.Page.doProcessRequest(Page.java:3236)
 at com.sap.ip.bi.webapplications.runtime.impl.Page.processRequest(Page.java:2512)
 at com.sap.ip.bi.webapplications.runtime.controller.impl.Controller.doProcessRequest(Controller.java:956)
 at com.sap.ip.bi.webapplications.runtime.controller.impl.Controller.processRequest(Controller.java:842)
 at com.sap.ip.bi.webapplications.runtime.jsp.portal.services.BIRuntimeService.handleRequest(BIRuntimeService.java:430)
 at com.sap.ip.bi.webapplications.runtime.jsp.portal.components.LauncherComponent.doContent(LauncherComponent.java:21)
 at com.sapportals.portal.prt.component.AbstractPortalComponent.serviceDeprecated(AbstractPortalComponent.java:209)
 at com.sapportals.portal.prt.component.AbstractPortalComponent.service(AbstractPortalComponent.java:114)
 at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:328)
 at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:136)
 at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:189)
 at com.sapportals.portal.prt.component.PortalComponentResponse.include(PortalComponentResponse.java:215)
 at com.sapportals.portal.prt.pom.PortalNode.service(PortalNode.java:645)
 at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:328)
 at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:136)
 at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:189)
 at com.sapportals.portal.prt.core.PortalRequestManager.runRequestCycle(PortalRequestManager.java:753)
 at com.sapportals.portal.prt.connection.ServletConnection.handleRequest(ServletConnection.java:240)
 at com.sapportals.portal.prt.dispatcher.Dispatcher$doService.run(Dispatcher.java:522)
 at java.security.AccessController.doPrivileged(Native Method)
 at com.sapportals.portal.prt.dispatcher.Dispatcher.service(Dispatcher.java:405)
 at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
 at com.sap.engine.services.servlets_jsp.server.servlet.InvokerServlet.service(InvokerServlet.java:156)
 at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
 at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
 at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
 at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:387)
 at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:365)
 at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:944)
 at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:266)
 at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
 at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:174)
 at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
 at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
 at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
 at java.security.AccessController.doPrivileged(Native Method)
 at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
 at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
Caused by: com.sap.ip.bi.base.application.exceptions.AbortMessageRuntimeException: Termination message sent
ABEND RSBOLAP (000): Program error in class SAPMSSY1 method : UNCAUGHT_EXCEPTION
MSGV1: SAPMSSY1
MSGV3: UNCAUGHT_EXCEPTION
 at com.sap.ip.bi.base.application.message.impl.MessageManager.addMessageInternal(MessageManager.java:148)
 at com.sap.ip.bi.base.application.message.impl.MessageManager.addMessage(MessageManager.java:113)
 at com.sap.ip.bi.base.application.message.impl.MessageManager.addMessageInternal(MessageManager.java:144)
 at com.sap.ip.bi.base.application.message.impl.MessageManager.addMessage(MessageManager.java:113)
 at com.sap.ip.bi.base.application.message.impl.MessageManager.addMessageInternal(MessageManager.java:144)
 at com.sap.ip.bi.base.application.message.impl.MessageManager.addMessage(MessageManager.java:113)
 at com.sap.ip.bi.base.application.service.RfcService.fillMessages(RfcService.java:268)
 at com.sap.ip.bi.base.application.service.RfcService.doPostProcessing(RfcService.java:218)
 at com.sap.ip.bi.base.application.service.rfcproxy.impl.RfcFunction.execute(RfcFunction.java:57)
 at com.sap.ip.bi.base.application.service.RfcService.doPostProcessing(RfcService.java:227)
 at com.sap.ip.bi.base.application.service.rfcproxy.impl.RfcFunction.execute(RfcFunction.java:57)
 at com.sap.ip.bi.bics.dataaccess.resource.impl.bi.selector.ProviderInfoObject.prepareForSelectionMemberAccess(ProviderInfoObject.java:1215)
 at com.sap.ip.bi.bics.dataaccess.resource.impl.bi.selector.selection.ProviderComponentList.setup(ProviderComponentList.java:87)
 at com.sap.ip.bi.bics.dataaccess.resource.impl.bi.selector.selection.ProviderComponentList.getComponents(ProviderComponentList.java:120)
 at com.sap.ip.bi.bics.dataaccess.consumer.impl.selector.selection.ComponentList.setup(ComponentList.java:96)
 at com.sap.ip.bi.bics.dataaccess.consumer.impl.selector.selection.ComponentList.<init>(ComponentList.java:77)
 at com.sap.ip.bi.bics.dataaccess.consumer.impl.selector.selection.CartesianProduct.setup(CartesianProduct.java:78)
 at com.sap.ip.bi.bics.dataaccess.consumer.impl.selector.selection.CartesianProduct.<init>(CartesianProduct.java:55)
 at com.sap.ip.bi.bics.dataaccess.consumer.impl.selector.selection.Selection.<init>(Selection.java:57)
 at com.sap.ip.bi.bics.dataaccess.consumer.impl.selector.SelectionObject.createSelection(SelectionObject.java:538)
 at com.sap.ip.bi.bics.dataaccess.consumer.impl.selector.SelectionObject.getSelectionSpace(SelectionObject.java:549)
 at com.sap.ip.bi.bics.dataaccess.consumer.impl.selector.SelectionObject.getEffectiveSelection(SelectionObject.java:577)
 at com.sap.ip.bi.km.impl.KmUtilities.getEffectiveSelection(KmUtilities.java:66)
 at com.sap.ip.bi.km.impl.source.property.QueryBuilderMulti.getQueryExpressionWrapper(QueryBuilderMulti.java:129)
 at com.sap.ip.bi.km.impl.source.CmFolderSource.getDocumentQueryResult(CmFolderSource.java:132)
 at com.sap.ip.bi.km.common.selection.DocumentSelectorResultSet.readQvDocuments(DocumentSelectorResultSet.java:234)
 at com.sap.ip.bi.km.common.selection.DocumentSelectorResultSet.getCellsWithDocuments(DocumentSelectorResultSet.java:136)
 at com.sap.ip.bi.km.common.selection.DocumentsSelectionService.getCellsWithDocuments(DocumentsSelectionService.java:258)
 at com.sap.ip.bi.bics.dataaccess.consumer.impl.queryview.resultset.RsDataCells.hasDocuments(RsDataCells.java:620)
 at com.sap.ip.bi.bics.dataaccess.consumer.impl.queryview.resultset.RsDataCell.hasDocuments(RsDataCell.java:543)
 at com.sap.ip.bi.webapplications.ui.items.analysis.renderer.interactive.RendererInteractive.createContent_DocumentSymbol(RendererInteractive.java:1660)
 at com.sap.ip.bi.webapplications.ui.items.analysis.renderer.interactive.RendererInteractive.createCell_Content(RendererInteractive.java:545)
 at com.sap.ip.bi.webapplications.ui.items.analysis.renderer.interactive.RendererInteractive.createCell(RendererInteractive.java:525)
 at com.sap.ip.bi.webapplications.ui.items.analysis.renderer.interactive.RendererInteractive.createTableRow(RendererInteractive.java:489)
 at com.sap.ip.bi.webapplications.ui.items.analysis.renderer.interactive.RendererInteractive.getContent(RendererInteractive.java:423)
 at com.sap.ip.bi.webapplications.ui.items.analysis.control.AcPivotTableInteractive.buildUrTree(AcPivotTableInteractive.java:321)
 at com.sap.ip.bi.webapplications.ui.framework.base.impl.CompositeBuildUrTreeTrigger.process(CompositeBuildUrTreeTrigger.java:33)
 at com.sap.ip.bi.webapplications.ui.framework.base.composites.UiRootContainer.iterateOverChildren(UiRootContainer.java:40)
 at com.sap.ip.bi.webapplications.ui.framework.base.impl.CompositeBuildUrTreeTrigger.process(CompositeBuildUrTreeTrigger.java:36)
 at com.sap.ip.bi.webapplications.ui.advancedcontrols.bridge.AcItemBridge.iterateOverChildren(AcItemBridge.java:61)
 at com.sap.ip.bi.webapplications.ui.framework.base.impl.CompositeBuildUrTreeTrigger.process(CompositeBuildUrTreeTrigger.java:36)
 at com.sap.ip.bi.webapplications.ui.unifiedrendering.controls.FlowLayoutItem.iterateOverChildren(FlowLayoutItem.java:63)
 at com.sap.ip.bi.webapplications.ui.framework.base.impl.CompositeBuildUrTreeTrigger.process(CompositeBuildUrTreeTrigger.java:36)
 at com.sap.ip.bi.webapplications.ui.unifiedrendering.controls.FlowLayout.iterateOverChildren(FlowLayout.java:69)
 at com.sap.ip.bi.webapplications.ui.framework.base.impl.CompositeBuildUrTreeTrigger.process(CompositeBuildUrTreeTrigger.java:36)
 at com.sap.ip.bi.webapplications.ui.framework.base.composites.UiRootContainer.iterateOverChildren(UiRootContainer.java:40)
 at com.sap.ip.bi.webapplications.ui.framework.base.impl.CompositeBuildUrTreeTrigger.process(CompositeBuildUrTreeTrigger.java:36)
 at com.sap.ip.bi.webapplications.ui.advancedcontrols.bridge.AcItemBridge.iterateOverChildren(AcItemBridge.java:61)
 at com.sap.ip.bi.webapplications.ui.framework.base.impl.CompositeBuildUrTreeTrigger.process(CompositeBuildUrTreeTrigger.java:36)
 at com.sap.ip.bi.webapplications.ui.unifiedrendering.controls.MatrixLayoutCell.iterateOverChildren(MatrixLayoutCell.java:63)
 at com.sap.ip.bi.webapplications.ui.framework.base.impl.CompositeBuildUrTreeTrigger.process(CompositeBuildUrTreeTrigger.java:36)
 at com.sap.ip.bi.webapplications.ui.unifiedrendering.controls.MatrixLayoutRow.iterateOverChildren(MatrixLayoutRow.java:56)
 at com.sap.ip.bi.webapplications.ui.framework.base.impl.CompositeBuildUrTreeTrigger.process(CompositeBuildUrTreeTrigger.java:36)
 at com.sap.ip.bi.webapplications.ui.unifiedrendering.controls.MatrixLayout.iterateOverChildren(MatrixLayout.java:69)
 at com.sap.ip.bi.webapplications.ui.framework.base.impl.CompositeBuildUrTreeTrigger.process(CompositeBuildUrTreeTrigger.java:36)
 at com.sap.ip.bi.webapplications.ui.container.matrixlayout.control.AcMatrixControlGrid.iterateOverChildren(AcMatrixControlGrid.java:40)
 at com.sap.ip.bi.webapplications.ui.framework.base.impl.CompositeBuildUrTreeTrigger.process(CompositeBuildUrTreeTrigger.java:36)
 at com.sap.ip.bi.webapplications.ui.framework.base.composites.UiRootContainer.iterateOverChildren(UiRootContainer.java:40)
 at com.sap.ip.bi.webapplications.ui.framework.base.impl.CompositeBuildUrTreeTrigger.process(CompositeBuildUrTreeTrigger.java:36)
 at com.sap.ip.bi.webapplications.ui.advancedcontrols.bridge.AcItemBridge.iterateOverChildren(AcItemBridge.java:61)
 at com.sap.ip.bi.webapplications.ui.framework.base.impl.CompositeBuildUrTreeTrigger.process(CompositeBuildUrTreeTrigger.java:36)
 at com.sap.ip.bi.webapplications.ui.unifiedrendering.controls.Group.iterateOverChildren(Group.java:63)
 at com.sap.ip.bi.webapplications.ui.framework.base.impl.CompositeBuildUrTreeTrigger.process(CompositeBuildUrTreeTrigger.java:36)
 at com.sap.ip.bi.webapplications.ui.container.group.control.AcGroupControl.iterateOverChildren(AcGroupControl.java:259)
 at com.sap.ip.bi.webapplications.ui.framework.base.impl.CompositeBuildUrTreeTrigger.process(CompositeBuildUrTreeTrigger.java:36)
 at com.sap.ip.bi.webapplications.ui.framework.base.composites.UiRootContainer.iterateOverChildren(UiRootContainer.java:40)
 at com.sap.ip.bi.webapplications.ui.framework.base.impl.CompositeBuildUrTreeTrigger.process(CompositeBuildUrTreeTrigger.java:36)
 at com.sap.ip.bi.webapplications.ui.advancedcontrols.bridge.AcItemBridge.iterateOverChildren(AcItemBridge.java:61)
 at com.sap.ip.bi.webapplications.ui.framework.base.impl.CompositeBuildUrTreeTrigger.process(CompositeBuildUrTreeTrigger.java:36)
 at com.sap.ip.bi.webapplications.ui.unifiedrendering.controls.FlowLayoutItem.iterateOverChildren(FlowLayoutItem.java:63)
 at com.sap.ip.bi.webapplications.ui.framework.base.impl.CompositeBuildUrTreeTrigger.process(CompositeBuildUrTreeTrigger.java:36)
 at com.sap.ip.bi.webapplications.ui.unifiedrendering.controls.FlowLayout.iterateOverChildren(FlowLayout.java:69)
 at com.sap.ip.bi.webapplications.ui.framework.base.impl.CompositeBuildUrTreeTrigger.process(CompositeBuildUrTreeTrigger.java:36)
 at com.sap.ip.bi.webapplications.ui.framework.base.composites.UiRootContainer.iterateOverChildren(UiRootContainer.java:40)
 ... 42 more

Hi,
The error log shows you are executing your query on portal which uses Java stack. There may some issue with the portal configuration. Check with your basis/portal team.
The query will execute in BEx and RSRT as RSRT executes query on ABAP stack.
Regards,Niraj

System error in program CL_RSMD_RS_0CALWEEK

As of this morning we are getting an error (see below) when we run reports on the portal. Apparently all reports that refer to 0CALWEEK one way or another are crashing.
The bizarre thing is that if I run the same reports in BEx analyzer, the reports don't crash ... the run just fine.
Anyone ever experienced something like this?
Any help or suggestions are appreciated.
Thank you
Marco
500 Internal Server Error
BEx Web Application
Failed to process request. Please contact your system administrator.
[Hide]
Error Summary
While processing the current request, an exception occured which could not be handled by the application or the framework.
If the information contained on this page doesn't help you to find and correct the cause of the problem, please contact your system administrator.
To facilitate analysis of the problem, keep a copy of this error page. Hint: Most browsers allow to select all content, copy it and then paste it into an empty document (e.g. email or simple text file).
Root Cause
The initial exception that caused the request to fail, was:
Termination message sent
ABEND RSBOLAP (000): Program error in class SAPMSSY1 method : UNCAUGHT_EXCEPTION
MSGV1: SAPMSSY1
MSGV3: UNCAUGHT_EXCEPTION
com.sap.ip.bi.base.application.exceptions.AbortMessageRuntimeException: Termination message sent
ABEND RSBOLAP (000): Program error in class SAPMSSY1 method : UNCAUGHT_EXCEPTION
MSGV1: SAPMSSY1
MSGV3: UNCAUGHT_EXCEPTION
at com.sap.ip.bi.base.application.message.impl.MessageManager.addMessageInternal(MessageManager.java:148)
at com.sap.ip.bi.base.application.message.impl.MessageManager.addMessage(MessageManager.java:113)
Details: Full Exception Chain
Messages
ABEND: Program error in class SAPMSSY1 method : UNCAUGHT_EXCEPTION
ABEND: System error in program CL_RSMD_RS_0CALWEEK and form VALUES_GENERATE-01 (see long text)

I submitted a ticket for this issue and I got directions to apply OSS note 1018814.
I don't know if this would solve your issue or not but based on our current situation here at my company, (version and SP level), the support person indicated that the OSS note he indicated was the best choice to fix it.

Error using variables in BEx

Hi experts
We use NW 04s BI SP09 and NW 04s EP SP09. We have made two queries that work fine. We have tested them in RSRT and the variables (both have customer exits and manual input) are filled. They work fine if we run them in our portal one by one. If we put one of the queries in a web template it still works fine. The problem occurs when we put two or more queries (with customer exits in both queries) into one template and use the variable screen. If we dont use the variable screen (VARIABLE_SCREEN = OFF) the error dont occur. I pasted a typical error message we get below (using variable screen). The error message is displayed after the variable screen has been filled out (0P_KAYD2) and checked.
Specify a value for variable 0P_KEYD2
Program error in class SAPMSSY1 method : UNCAUGHT_EXCEPTION
System error in program SAPSRRK0 and form APPEND_KHANDLE_1-02- (see long text)
Log ID: 0003BA0F39140062000007F200004B9A0004233B75B61056
Initial cause
Message:
Termination message sent ERROR BRAIN (629): Specify a value for variable 0P_KEYD2 MSGV1: 0P_KEYD2ABEND RSBOLAP (000): Program error in class SAPMSSY1 method : UNCAUGHT_EXCEPTION MSGV1: SAPMSSY1 MSGV3: UNCAUGHT_EXCEPTION
Does anyone have the same problem?
Kind regards
Erik

Yes, we are getting the same issue. Check out thread Error while executing query on portal-SAPMSSY1 method : UNCAUGHT_EXCEPTION
On my current project, the SAP team member said the fix would also be coming in Support Pack 11 at the end of Dec 2006.

System error in program CL_RSMD_RS_SPECIAL

I have a query built on a Infoset, and the problem comes with 0FISCPER variable, when we try to do a input help (F4) in Bex. this happens only when I use fiscper on queries bulit on INFOSETS, and it works perfectly alright with all other cubes. We are on SP13. So do anyone know how to fix this issue, or a single OSS that can fix this issue.
System error in program CL_RSMD_RS_SPECIAL and form
IF_RSMD_RS~READ_META_DATA-02 (see long text)
Message no. BRAIN299
Diagnosis
This internal error is an intended termination resulting from a program
state that is not permitted.
Procedure
Analyze the situation and inform SAP.
If the termination occurred when you executed a query or Web template,
or during interaction in the planning modeler, and if you can reproduce
this termination, record a trace (transaction RSTT).
For more information about recording a trace, see the documentation for
the trace tool environment as well as SAP Note 899572.
and in portal, it gets to the point of variable screen and then throws a error msg.
ABEND RSBOLAP (000): Program error in class SAPMSSY1 method : UNCAUGHT_EXCEPTION
MSGV1: SAPMSSY1
MSGV3: UNCAUGHT_EXCEPTION

I was a lil late on this time
However;i found a note below which exactly matches your infoset issue and 0fiscper,but i believe that SP-14 did the trick.
any ways good luck
Note 1058906 - GET_DIME_VALUES-02 in CL_RSMD_RS_SPECIAL
Hope it Helps
Chetan
@CP..

System error in program SAPLRRI2 and form GET_QUERY_PROPERTIES-01

Hi All,
I'm configuring the integration between BW 7 SP 11 and Portal 7 SP11. I have problems in the IP functions.
The following error ocurrs in QueryDesigner when trying to execute a Query that is on an Agregation Level :
The initial exception that caused the request to fail, was:
Termination message sent
ABEND RSBOLAP (000): Program error in class SAPMSSY1 method : UNCAUGHT_EXCEPTION
MSGV1: SAPMSSY1
MSGV3: UNCAUGHT_EXCEPTION
com.sap.ip.bi.base.application.exceptions.AbortMessageRuntimeException: Termination message sent
ABEND RSBOLAP (000): Program error in class SAPMSSY1 method : UNCAUGHT_EXCEPTION
MSGV1: SAPMSSY1
MSGV3: UNCAUGHT_EXCEPTION
at com.sap.ip.bi.base.application.message.impl.MessageManager.addMessageInternal(MessageManager.java:148)
at com.sap.ip.bi.base.application.message.impl.MessageManager.addMessage(MessageManager.java:113)
ABEND: Program error in class SAPMSSY1 method : UNCAUGHT_EXCEPTION
ABEND: System error in program SAPLRRI2 and form GET_QUERY_PROPERTIES-01- (see long text)
When I execute Querys that are on Infoproviders, everything is ok.
Any Idea??
Thnks a lot!!!
Yolanda.

Hi,
Are you getting an ST22 dump in the backend, we used to get this kind of error in case of hierarchies, please check 2 things
1. Agg level is active
2. Check the query (option is available on query designer)
thanks

500 Server Error when executing Query in Portal

When I run a query in the ABAP Web all the components (the pulldowns) work as well as the query executes.
When I run the query in the Java WebI get a 500 Internal Server Error
com.sap.ip.bi.base.application.exceptions.AbortMessageRuntimeException: Termination message sent
ABEND RSBOLAP (000): Program error in class SAPMSSY1 method : UNCAUGHT_EXCEPTION
MSGV1: SAPMSSY1
MSGV3: UNCAUGHT_EXCEPTION
ABEND BRAIN (299): System error in program BICS_PROV_GET_INITIAL_STATE and form Variables are not submitted (see long text)
MSGV1: BICS_PROV_GET_INITIAL_STATE
MSGV2: Variables are not submitted
We are using Netweaver 7.0 sp 13.
Any help is appreciated.... Point rewarded !!!
Mike

Yes I get that and it has been installed and everythign is worked awesomly. I can export queries to the portal. SSO, SSL and the whole bit it installed.
The nwa default trace tool doesn't give me much to go on. Err looks like i described it above however it says its in
Category: /Applications/BI
Location: com.sap.ip.bi.base.application.message.impl.MessageBase
Application: sap.com/irj
The other err is in
Category: /Applications/BI/Application_Framework
Any ideas of where I should look?

Error when executing report due to 0FISCPER

Hi All,
I am using a customer exit in my query to calculate the year to date numbers for current Fiscal Period and prior fiscal year (via offset -12). When I execute the query it works fine but when I save it to my portal favorite and re-execute from the favorite, it throws an error:
Termination message sent
ERROR BRAIN (648): Variable value must be numeric
ERROR BRAIN (599): For characteristic 0FISCPER, enter value in a permitted format
MSGV1: 0FISCPER
MSGV2: 200/001/
ERROR BRAIN (599): For characteristic 0FISCPER, enter value in a permitted format
MSGV1: 0FISCPER
MSGV2: 200/005/
ERROR BRAIN (648): Variable value must be numeric
ABEND RSBOLAP (000): Program error in class SAPMSSY1 method : UNCAUGHT_EXCEPTION
MSGV1: SAPMSSY1
MSGV3: UNCAUGHT_EXCEPTION
Here is my customer exit code. Do you see any issues with the exit that is causing the above error?
DATA: lv_cur_period(3) TYPE n,
 lv_cur_year(4) TYPE n.
 WHEN 'ZCC_FPER_YTD_INTERVAL'.
 IF i_step = '1'.
Determine current fiscal period
 CALL FUNCTION 'DATE_TO_PERIOD_CONVERT'
 EXPORTING
 i_date = SY-DATUM
 i_periv = 'MR'
 IMPORTING
 E_BUPER = lv_cur_period
 E_GJAHR = lv_cur_year
 EXCEPTIONS
 INPUT_FALSE = 1
 T009_NOTFOUND = 2
 T009B_NOTFOUND = 3
 OTHERS = 4
 IF sy-subrc <> 0.
 ENDIF.
Enter interval into variable
 CONCATENATE lv_cur_year '001' INTO l_s_range-low.
 CONCATENATE lv_cur_year lv_cur_period INTO l_s_range-high.
 l_s_range-sign = 'I'.
 l_s_range-opt = 'BT'.
 APPEND l_s_range TO e_t_range.
 ENDIF.
Thanks a bunch.

Hi Venkat and Gaurav,
Thanks for your replies. The format of Fiscal Period in the first variable screen is correct with the Concatenate statements that I originally had in the customer exit. It displays an interval of 001/2010 - 005/2010 which is what I want.
CONCATENATE lv_cur_year '001' INTO l_s_range-low.
CONCATENATE lv_cur_year lv_cur_period INTO l_s_range-high.
I created another i_step = 2 variable with 'ready for input' unchecked and added it to the original i_step = 1 variable within the RKF. As I have limited knowledge of coding customer exists, I added the following code for the 2nd variable that I found on SDN as seen below. After applying this code and executing the "saved report on portal favorite", the original error message went away and I get to the variable screen but the format that displays now is 201/001/ - 201/005/. Why does it work the first time it is executed and why does it mess up the format when executed from portal favorite, really confused.
 WHEN 'ZCC_FPER_YTD_INTERVAL_2'.
 IF i_step = '2'.
 READ TABLE i_t_var_range WITH KEY vnam = 'ZCC_FPER_YTD_INTERVAL' ASSIGNING
 <input>.
Determine current fiscal period
 CALL FUNCTION 'DATE_TO_PERIOD_CONVERT'
 EXPORTING
 i_date = SY-DATUM
I_MONMIT = 00
 i_periv = 'MR'
 IMPORTING
 E_BUPER = lv_cur_period
 E_GJAHR = lv_cur_year
 EXCEPTIONS
 INPUT_FALSE = 1
 T009_NOTFOUND = 2
 T009B_NOTFOUND = 3
 OTHERS = 4
 IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
 ENDIF.
Enter interval into variable
 CONCATENATE lv_cur_year lv_cur_period INTO lv_cur_fiscper.
 l_s_range-low = lv_cur_fiscper.
 l_s_range-high = <input>-low.
 l_s_range-sign = 'I'.
 l_s_range-opt = 'BT'.
 APPEND l_s_range TO e_t_range.
 ENDIF.

BexWAD (BuisnessExplorerWebApplicationDesigner), - RSBOLAP MessageNumber 17 error

Similar Messages

Maybe you are looking for