BFD 2.0 problem & solution

Hi everyone,
I just had some frustrating problems with the latest version of BFD 2.
I have found the solution and though it would be a good idea to post for others.
Problem is, Logic 8.0.2 will crash opening any song with BFD 2 instantiated.
I found this out from the crash report.
Had to disable BFD (removing BFD 2 from AU plug-in component folder) and restart the songs without BFD, disable the plug-in from Logic song, save project, re-install BFD in AU component folder then reload the song. This is the only way I was able to reload the songs without crashing.
This took me a couple hours of searching.
Have a pleasant day,
My 2 cents,
Marc

if you use 16 bit mode in BFD2 streaming engine settings... that issue should never happen
I don't use BFD2 massively... but thanks for the info...
I have got a similar issue only when streaming is setted to use the files in original bit deep format (should be 32 floating point... it is equire too much RAM size.. is very easy too exeed the Logic limit
if a Logic project require more than (2.8 or) 3GB of real ram.. it will be never opened
G

Similar Messages

How to delete the problem-solution in Solution Database

Dear Sir,
I need to delete the problem-solution in Solution Database which is already created in CRM ( IS01). However, I don't know how to delete.
Please advise.
Thank you and best regards,

Dear Sir,
I need to delete the problem-solution in Solution Database which is already created in CRM ( IS01). However, I don't know how to delete.
Please advise.
Thank you and best regards,

Convert Problems/Solutions into Knowledge Articles

Hi Experts,
I am wroking on SAP CRM 7.0 SP06 and now we are planning to implement Knowledge Article functionality.
I have done the all configuration settings and multilevel categorization, every thing working fine. Now I want to convert problems/solutions which already created in CRM and stored in SDB into knowledge article.
Any one please guide me how can I convert existing problems/solutions into knowledge articles. Is there any report for this?
Thanking you in anticipation.
Regards,
Babu.

Hi Kevin,
Well, I'm new on this and have only worked on CRM 6 & 7. I'll give you my advice regarding these CRM versions. I don't know if it is supported on CRM 5.
IMG:
CRM >> Enterprise Intelligence >> SAF >> Name and Configure KB
You create and define you DB as you want: ACME INC
CRM >> Enterprise Intelligence >> SAF >> Business Add-Ins >> BAdI: Knowledge Base
Each knowledge base should have its own Add-In implementation. So you have to implement an Add-In based on Add-In definition CRM_SAF_KB_*: CRM_SAF_KB_ACME. You can follow IMG documentation.
In my case, the add-in already existed, since Knowledge Article functionality is standard in 7.0. KB didn't exist, I don't know why. I just created it with the name assigned on the BAdI, compiled, and everything works fine now.
Hope it helps.
Regards.
Pablo

Install problem- Solution Manager4.0 /Oracle10.2.0.2 / Solaris 10

Kindly look into this link
Install problem- Solution Manager4.0 /Oracle10.2.0.2 / Solaris 10
Ashraf.

Kindly look into this link
Install problem- Solution Manager4.0 /Oracle10.2.0.2 / Solaris 10
Ashraf.

SDB - delete problem/solution

Hi Experts.
Is it possible to delete problem/solution from solution database? There is information in help that it is not possible to delete problem/solution, but that they can be archived.. But note 946030 says it is not available...
Regards
Piotr

Hello Piotr,
In version 4 it was released one note (730402) that allow us to delete some symptoms and solutions. However, this may lead into some inconsistencies if they're linked with documents. We've never tried to execute it.... but if this may help you, try it
Kind regards,
Bruno

UNIXWARE ORACLE V7.3.3 COREDUMP PROBLEM SOLUTION

제품 : ORACLE SERVER
작성날짜 : 1998-03-24
Unixware Oracle V7.3.3 Coredump problem solution
Unixware 용 Oracle V7.3.3 을 사용할 때 svmrgrl 와 sqlplus 수행시 core dump가
발생하는 경우가 있습니다.
- sqlplus 의 경우
username 과 passwd를 두번이상 틀릴경우 발생합니다.
$ sqlplus [enter]
Enter user-name : [enter]
Enter user-name : [enter]
core dump 발생
sqlplus 로 connect된 상태에서 connect 명열을 사용하면 core dump가
발생합니다.
$ sqlplus scott/tiger
SQL> connect scott/tiger
core dump 발생
- svrmgrl 의 경우
svrmgrl 를 exit 할 경우 가끔 발생합니다.
1. Advanced Networing Option 이 인스톨되어 있는지 확인한다.
이 제품이 인스톨되어 있을때 Core dump 가 발생할 경우가 많다.
install된 제룸 확인법
# cd $ORACLE_HOME/orainst
# inspdver
Advanced Networing Option 이 인스톨되어 있으면 De-install 한다.
(orainst 이용)
De-install 후 Oracle , Network, SQL*Plus 등을 Relinking 한다.
# svrmgrl
SVRMGR> connect internal
SVRMGR> shutdown
SVRMGR> exit
$ lsnrctl stop
$ cd $ORACLE_HOME/network/lib
$ make -f ins_network.mk install
$ cd $ORACLE_HOME/rdbms/lib
$ make -f ins_rdbms.mk install
$ cd $ORACLE_HOME/sqlplus/lib
$ make -f ins_sqlplus.mk install
2. $ORACLE_HOME/otrace/admin/*.dat 화일을 지운다.
$ cd $ORACLE_HOME/otrace/admin
$ rm -f *.dat
3. 환경 변수 EPC_DISABLED 를 TRUE 로 설정한다.
ksh (.profile)
$ export EPC_DISABLED=true
csh (.cshrc)
$ setenv EPC_DISABLED true
4. 3번까지 작업을 한 경우에도 계속해서 CoreDump 가 발생할 경우 다음의
OS Kernel Parameter들을 확인한다.
$ su
Passwd:
# cd /etc/conf/bin
# ./idtune -g SVMMLIM
0X7FFFFFFF 0x2000000 0x1000000 0x7FFFFFFF
# ./idtune -g HVMMLIM
0X7FFFFFFF 0x2000000 0x1000000 0x7FFFFFFF
결과가 위와 다를 경우 (첫번째 컬럼의 값이 0x7FFFFFFF 가 아닐경우)
OS Kernel을 Rebuild 한다.
# ./idtune SVMMLIM 0x7FFFFFFF
# ./idtune HVMMLIM 0x7FFFFFFF
# ./idbuild
# cd /
# shutdown -y -g0 -i6

Hi,
I've found the solution. I have to stop and start my listener each morning (i shutdown and save my dbs each night). now, it work fine !!
<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by jean-guy avelin ([email protected]):
Hi all !
It seems I can't acces views from a jsp using jdbc :
when I try stmt.executeQuery("select * from dual"), it works. when i create a basic view on my dbserver ( create view toto as (select * from sys.dual) ) and I try this jdbc query stmt.executeQuery("select * from toto"), I get this error : ORA-12154
I use Oracle V7.3.4.5.0 on tru64Unix 5.0A on my oracle server. I've tried V8.1.7 and V3 jdbc drivers. Last year, I think my program (using views) ran fine with an oldest version of oracle server ....
Any idea ?
thanks in advance
jean-guy<HR></BLOCKQUOTE>
null

Update to PS CC 2014 all updated ok, opening image in camera raw if I use any sliders/panels it just freezes the raw module. Anyone with similar problem/solution?

Any solutions/fixes. Photoshop itself it's fully functional apart from the raw opening problem. I did have 8.5rc installed, raw does seem to have updated as I now have PS CC (non 2014 version) fully functional. I have already tried a new download and re install of 2014 to no avail. Also tried a download of the separate raw module, no fix either.
Win 8.1 system
Thanks in advance of any help, was trying to avoid a complete Adobe file wipe.

Ok, so this is actually a Wacom driver problem( I'm using Intuos 4). If I turn off windows ink in Wacom driver settings then my sliders in camera raw become responsive again, but I lose pressure sensitivity in PS. Just updated Wacom drivers, but no joy. Anybody have a work around/fix?

K7N2 Delta-L: Strange cold boot problem & solution

My K7N2 Delta-L has a problem cold booting when the vcore is set in the bios at 1.65v of higher. After a cold boot, you get a blank black screen. I noticed that even if you run at default speeds but set the vcore to 1.65v of higher the problem still occurs. There is no problem rebooting however.
I found the following solutions:
1. After you power up and get a blank, hit the reset button.
2. Don't unplug your PC. My PC is connected to a AVR and after I power down the PC I usually turn the AVR off. If i do this, than the computer will have a booting problem if I try to boot it up 30 minutes later or so. Now if I don't unplug it/power off the AVR than everything is fine.
I don't understand why it acts the way it does though.
Does anyone know of any other solutions?

Have you cleared the cmos. If you do be sure you have the power turned off don't move the cmos jumper with the power on.
I found that turning off power at power supply and unpluging, than turning on the computer the fans will spin just a little this drains all the power. Clear cmos 2-3 than return to
1-2 position.
Than plug the power back in and turn it back on, than try the computer again.

Macbook pro retina 15 mid-2012 display problem : solution :)

Well. This topic is not really a question, I hope this could be a solution for both users and Apple. Its free, but if Apple wants to offer me a full options Mac Pro, or hire me as consultant we can discuss ^^
The story is long, but is worth. Sorry in advance for my swissy english. I hope you'll enjoy.
As many of retina mid-2012 owners (and perhaps other versions) I encountered the symptom of my machine crashing more and more frequently (from once per week to more times per day). Crash usually with a message of "read error" or some display related crash dumps, often linked to the switching of graphic card (integrated<->dedicated).
For a long times a suspected some burnt chip (because of using 1-3 external screen all the day) and seeing istatmenu with crazy temperatures of 90-105°C. I was disappointed because of the evolving symptom (crashes more and more frequent and sometimes no display at power on)
It took me ages to discover what exactly did my MBPR crash, as it was crashing "randomly" for me. Sometimes after crashing, hard shutdown and restart, it wouldn't display or even power on the backlight, for one hour or one day and suddenly it would display again !!
I tried all the solutions found here and there including replacing the thermal paste, smc or pram reset -> no luck.
I took it to my local Apple provider and I was told I would have to change the motherboard. An expensive operation, since the warranty was expired by 2-3 months.
So I bought a 13 inchs retina as replacement and continued to diagnose my 15 inchs in parallel.
I discovered that it would crash if I bend it : Power on, one hand on each side applying a light bend in the two directions made my MBPR crash. So suddenly the problem wasn't random anymore. Mouhahahaha. This could be motherboard or chip related (de-soldered solderings here or there), or case related. Let's hope the problem's not mobo related.
I opened the case and tried to see in the dark if I could see a mini lightning when bending (because of a bad ground somewhere). -> No luck
So I tried to put paper here and there to try to locate the potential bad ground. Booting, bending, hard shutdowning, papering, booting, bending,...
And suddenly the darkness became light : If I put a paper at the right place, my MBPR will resist to the bend test. Was my mobo alive, and was this nightmare only a progressive bad ground ? Yes.
Here me good : the progressive symptom of random crashing of my MBPR (which I imputed for a long time to an old chip since the symptom was the same under windows 7 bootcamp + because of the graphic switching behaviour) was in fact only a bad contact at a very given place.
The very given place (my diagnose and my solution) ?
The screws of the left's fan (thunderbolt's side) or/and the fan case itself are screwed through the motherboard. For a reason (temperature, mecanic constraints or corrosion) this stuff entered in contact with each other, the redox gained the near electronic motherboard tracks (especially the thunderbolts one I guess).
Proof :
If I put a piece of paper between the motherboard and the case, I can bend my MBPR without it to crash and use it as before (except for external screens).
My diagnose :
once the material of the screw/fan case/motherboard track enter in direct contact, there is a corrosion effect that affects more and more the neighboor.
Here is a pic of my repair :
I can now :
play hours in windows 7 bootcamp
switch between graphic cards with gfxcardstatus (even with a playing itunes animation)
sleep and wake up with integrated or dedicated graphics
I can't :
connect a screen through thunderbolt since it activates the corosionned part of my MBPR, so it will work for a period of time but will assure me that a crash is awaiting (perhaps after a wake up or randomly from this time)
I'm confident that this problem is conceptual and that a big part of 15 inches retina mobo's exchanges are due to this question.
Hope this helps
Kisses from Switzerland

I tried to diagnose this mid 2012 retina 15 inchs for a couple of month now. With a very similar symptom of a lot of people :
some that exchanged the motherboard more times and experienced again the same freezes / shutdown again
some that installed mavericks by believing it workarounded the problem (but majority also says after a while that actually the problem was only differently reproduceable)
some hoping Apple to release a sowtware fix for that or a recall of the concerned machines
I now think to have isolated one of the cause of such symptoms. At beginning I thought that the fan electric insulation had worked but actually not.
Solution for me :
open the under case
dismount a bit the two fans
insert paper bands under the motherboard (between the black bottom and the motherboard, I used ~120gr/m2 paper and cut it into bands of 10-13cm by 2-3cm).
I would have dismounted the motherboard if I had the right screwdriver, but this seemed to be a too long/hard work, so I went into this idea that my motherboard was ok and that the problem was only caused by a supposed short-circuit under the motherboard.
My thoughts :
The more big the hole in the black tape under the motherboard, the more frequent the freezes / shutdown due to a short circuit (electronics grounded at the false place because of the mobo entering in contact with a grounded metal part through the black tape)
I also thinks this short circuit is more dedicated graphics linked than integrated and that this is the reason why the symptom persists or reappear even after multiple motherboard exchanges for a lot of people and the reason some people use their machine with forced integrated graphics
This solution should apply as self doable for a lot of people
If I should bet, I think that the black insulating tape under the keyboard is scratched by the time (mecanic constraints on the chassis) by some mobo component until a false contact is created through the insulating tape
I can now (mid-2012 retina 15 inchs I7 8go 256go, osx 10.10.2) :
run firefox or VLC with integrated or dedicated graphicssleep/wake with integraded or dedicated graphics (forced or auto-switching) with such programs runningrun multiple screens (2x TB + HDMI at the same time), sleep the machine, unplugging 1 of the 3 screens during the sleep, wake the machine + bending the machine during the process without it to crash. \o/
The goal of this post is to share this amazing experience with both Apple and the users facing such a problem.
Problem solved without motherboard exchange and with a quite easy workaround

Dual monitor set up and problems/solutions?

I have just started to do event photography using 17" MBP running Aperture 2.1.3, a 23" ACD and Nikon D3 with Elinchrom DLite4s and printing to a Mitsubishi CP9800.
First event when very well, but as anticipated it threw up some problems. Some I'm probably just being dim about but I thought I would pose the questions anyhow and see how we go?
I tethered the D3 to the MBP which was displaying through the ACD so the punters could see nice big images… but this meant my colleague (who was shooting) got no preview of what he had shot. We overcame it by him quickly spinning the monitor to look see for positioning purposes.
I messed around a bit with some of the tethered options and found it easier to have the Auto-select uncrossed so that when punters were viewing I didn't keep losing their selection to each new picture taken (obvious I know, but it took me a short while to work that out).
So what I want to know is… is there anyway to have the preview only on the second monitor and maintain ALL the functionality on the first display?
In other words, so that we can cross Auto Select on the Tether HUD, he then sees every new image as he shoots it on his monitor (the second monitor that is, turned to face him 24/7), whilst I can use the MBP display (or maybe an additional ACD) to select images, edit and most importantly print (as that is where the dough comes from) without affecting his display.
I've managed to get it functioning so that I have the Main Viewer set to Browser Only whilst the Second Viewer is set to Alternate. This gives me exactly the look and layout I need, except when I click on an image to either edit or pint, it comes up in his display also?
Sorry for the really long winded explanation there.
Or is it something I'm doing wrong with the D3 and the USB set-up - I thought there was only one way that could be configured???
Would appreciate any help you can as next gig is on Thursday - lots of 16 y o girls in posh frocks
Regards
Andy

You have a choice to make.
You can use two video outputs on the video card or the single video output on the motherboard. You cannot use both.
I suggest using the DVD output on the video card and an adapter in the HDMI output on the card. The only problem is that using an old school VGA monitor won't work on the video card outputs since it needs to output to digital display devices. If you want two displays from the video card ,then you will probably need to purchase another LCD display to connect to the video card.
It is probably time to consider putting the old VGA monitor out to pasture. Its time has come and gone.
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

Creative Mp3 Players MTP Problem Solution

Hi,because of the firmware and windows problems,if you have a mp3 player with a firmware that doesn't support MTP problem,sometimes even if you reformat your computer,you can get "player not connected" error. To solve this you must install MTP supporting firmware on your mp3 player,but if you don't want to upgrade your firmware (because of being afraid of stucking in the recovery mode,some other reasons)there is some other solutions to solve this problem.
Editing registry keys,and some other patches did nothing to solve my problem.So I deleted all Creative Drivers and programs from Add/Remove Programs,and I deleted Windows Media Player 0 and installed Windows Media Player 9,than I installed everything from my mp3 player's cd (media source,nomad explorer,device drivers,etc.) and I downloaded and installed new device driver (version 2...) from creative web site. I restarted my computer,and my problem is completely solved. Try it...

morrissey wrote:
Hello,
I'm a newbie and I don't know a lot about MP3 players so I hope you can help me out. I have a brand new Kenwood car audio with an USB cable to plug your MP3 player in. My friend's Samsung MP3 player doesn't work, after some research I find out that the MP3 player has to be an MTP one to work with the car audio. Now my question is: are all Creative MP3 players MTP maschines and do I have to make a software update or what ever to "make them be" a MTP player?
Thanks a lot for any support!
Are you sure about this? Which Kenwood is it exactly? The info I've seen on the Kenwoods say that the USB device must be MSC (not MTP).
Perhaps your friend's Samsung is MTP, and that's why it didn't work.

"No Sound Blaster card detected.." and other driver problem SOLUTION

Hi. I promised to myself that I wont give up and I looked for a solution to all SB Li've! 5. OEM (0220 and others) problem not detecting the card by the new drivers ! AND HERE IT IS !! I tested it and works almost PERFECTLY !!! Also for peaple who HAVE the original drivers but have problem with EAX in such games like GTA San Andreas THIS IS THE SOLUTION FOR YOU !! I hope creative doesn't mind me posting this:http://kxproject.lugosoft.com/Enter here and download the drivers !! TRY IT !! Any questions please write ! Sory but i think this is important inough to start a new topic.. Hell yeah now I can play San Andreas even when it's raining (in game ofkozz :P) ... Oh and PS. For Win XP users read this first : http://kxproject.lugosoft.com/xp.php?language=en I used the second method (on the bottom of the page) Renaming the files and installing normally. You will be asked to insert the winXP CD couse it wont be able to find some files but you can just SEARCH for them on the system and you can find them (In c:\windows\system32 and system32\drivers). Then after reboot you go to Device Manager and update drivers for Sound Blaster Li've Series (or Multimedia audio device) mark "Don't look for drivers.." And choose KX from the list. Thats all I thinkPs 2 - set the mixer for your card couse basically it's set for 5. dolby surround. If you have 2 Speakers or headphones do this: run the KX mixer (tray) and click Speaker setting (the icon with "?") set it to 2. and in Surround set COPY. Then mark the "Use subwoofer output" and "Use bass redirection". Everything should work well. There I think I helped :PMessage Edited by Cubix on 07-09-2005 08:26 PM

Gee, I think it's catching on. I was VERY dissapointed when I wasted my money on the SB Li've! 24bit PCI. That card apparently isn't a Li've! card, it's got a different chipset. It performs horribly with games and there are no other drivers to use for it. Not even the Audigy 2 hack and the kX audo project will work with it. This is like the **bleep** child of all Sound Blasters. No support, no reasonable performance, and horrible drivers. I just joined this forum today and this is the 5th topic related to SB Li've! 24 bit issues that I've seen yet. And what does creative take into initiati've about it's Nothing. They ignore us and expect us to pay 20+ dollars US on an Audigy 2 ZS.Message Edited by BoRaiChu on -03-2005 07:33 PM

Problem-Solution: Help! I'm seeing my iCloud account two or more times in Notes and Contacts!

Problem: Help! I’m seeing my iCloud account two or more times in Notes and Contacts!
Solution:
Open [System Preferences] >
Open [iCloud] >
Uncheck [Contacts] for each duplicate iCloud you see in Contacts. ex. My iCloud Account is listed three times = uncheck Contacts twice. The checkbox next to Contacts will fill back in again automatically.
Uncheck [Notes] for each duplicate iCloud account you see in Notes. (same instructions for Contacts; repeat the steps for each duplicate account)
Why is this happening?
It has to do with iCloud Keychain. If you set up iCloud keychain on more than one Mac, it appears to duplicate the iCloud account in each respective application once per Mac. (ex. 2 Macs = 1 Duplicate). The good news is that the above fix appears to be permanent and does not reoccur.

Minor addition:
I’m setting up a new Mac—how can I avoid this?
Turn on iCloud in System Preferences (SP)
When asked if you wish to set up Mail, Contacts, Calendar, Find my Mac, et al., uncheck all boxes, and click Next.
Check the “Keychain” box first, then check all other boxes except Contacts and Notes.
Within a few minutes, these boxes will check themselves.

U330 + Windows 7 Drivers Problem & Solutions

U330 Windows 7 Drivers
http://consumersupport.lenovo.com/en/DriversDownloads/drivers_list.aspx?CategoryID=16
News Updates
11.4.09 - BIOS Release Fix Switchable Graphics and More
The new bios version 67 fixes switchable graphics issues from before and also enables VT mode for Intel's processor. Click here to download.
3.15.10 APS driver updates see links below
4.28.10 - BIOS update in test to address power consumption when using switchable graphics and resuming from suspend / sleep state. Will update once the BIOS is released to the web.
Problems with U330 drivers:
-APS is not accurate
Solution: Download and apply lattest APS drivers.
Download 32 bit Win 7
Download 64 bit Win 7
-Switchable graphics not working on both x86 and x64 platform
Solution: Download latest BIOS from here then flash your laptop and reinstall ATI Discrete Drivers.
-Screen brightness cannot be adjusted if switchable graphics is selected in the BIOS.
Solution: Should work now after you flash BIOS and reinstall discrete drivers.
-Windows restart will be stuck at a black screen (Not sure if this is related to drivers but most likely)
Solution: Should work now after you flash BIOS and reinstall discrete drivers.
-Secondary Display and Extended Display do not work
Solution: Should work now after you flash BIOS and reinstall discrete drivers.
Please send me a PM if you found solution to any of the problems listed above so I can update the thread. Thank you!
Recommendations:
Run Discrete Graphics
I've been playing around with the crippled drivers lately. I found that it's probably best to run discrete graphics since Intel GPU isn't really saving you power at all. I'm using drivers available through ATI's website. I'm getting around 3 hrs with power saving mode with some adjustments. My brightness adjustment works with ATI drivers and Window's dimming capability works. So in the long run that will probably save you more power than running Intel GPU. If anyone is able to get better battery life please let me know.
Disable APS
APS is not working properly so it's better not to have it at all in my opinion. It's constantly stopping the hard drive even though there are no strong vibrations or movement.
APS drivers have been updated and are reported to resolve prior issues.
Solved!
Go to Solution.

Hi,
I think that APS is not working properly. It is too acurate. When I just move my laptop in APS application I can see that my laptop is shaking for a 30 seconds and then my hard drive is stopped. I knew that everything couldn't be great. How can they (Lenovo) publish drivers without testing them?? Now there are two drivers, first the MOST important - switchable graphics - and now APS. I am just wondering why always Ideapads have to have problems with drivers?? We were waitng for a year without any support and now they give us faulty drivers. CONGARTUATIONS Lenovo!!!

Sync problem solution for iphone.

Problem:Sync is not working with iphone and itunes after i uninstalled and installed recently.
One reason and solution for the above problem is below.
Solution:Hi, I faced similar problem when I uninstalled itunes and installed updated one recently.After several analysis i found that antivirus software is blocking this device.What I did is I uninstalled my antivirus software and then when I connect iphone then sync works.May be it could be the same problem..check it out.

This is also covered in this help article: iTunes for Windows: Troubleshooting security software issues
http://support.apple.com/kb/TS3125

BFD 2.0 problem & solution

Similar Messages

Maybe you are looking for