BFF62048 Error after some time

Hello everyone,
I need CAN to communicate between a converter and our test cell. I use an NI PCMCIA-CAN/2 Card and LabVIEW 2012 SP 1. My program works fine but after some time I get an the error BFF62048. I know what it means but I don't know where the problem is nor how to solve it.
I use the Channel API for programming the CAN-communication.
The problem is I need to write at different timings on the can. Some messages need to be sent at 12ms others at 100ms. Therefore I initialized the messages in different tasks.
For CAN 1  have 1 readtask and 4 writetasks. For CAN 2 I have 1 readtask and 2 writetasks. I hope it is not too much for this little card.
The readtasks were both executed at 10ms after each other. The writetasks are executed in several parallel loops, except for one writetask. I need to send back an "alive value" immediately, so I read a value from my CAN-read-array and put it back on the CAN with a writetask. Which means I have to access the card 3 times in one loop.
I reduced the execution of my CAN-read-loop from 10ms to 20ms and the program runs much longer. (from ~30 min to 4 hours)
In my opinion the problem should occur immediately after I started my program not after some hours.
If someone have some advices for me, that would be great.
Thanks,
Rino

I use Labview 2012 (fully updated). Driver Version is 2.7.4
I don't think there is a problem with the bus load. Only 50 % of the capacity is used.
Unfortunately we are in lack of hardware, but I'm sure my code will work on a "real" PCI-CAN card. Is it possible, that the PCMCIA-card maybe has a problem with too many tasks? I couldn't find any information regarding the task limit in the hardware specification or I'm blind
I attached the project as *.zip file. I had to remove the can database files (*.dbc) because they are confidential.
Attachments:
Abnahme_629.zip ‏1058 KB

Similar Messages

  • Firefox Version 3.6.9 will support Mac OS X 10.8.5, as we are facing network timeout error after some time, we have checked all other settings

    Firefox Version 3.6.9 will support Mac OS X 10.8.5, as we are facing network timeout error after some time, we have checked all other settings

    We cant upgrade

  • I spend a long time to try to sync my itunes music on my ipod 160 GB Classic, but after waiting so long get a pop up message that itunes stop syncing because of error 46, some times giving me 58, 1469, and many other numbers, please help macbook pro

    i spend a long time to try to sync my itunes music on my ipod 160 GB Classic, but after waiting so long get a pop up message that itunes stop syncing because of error 46, some times giving me 58, 1469, and many other numbers, please help am using macbook pro

    That is precisely what my mid-2010 MacBoook Pro 13 was doing before the drive finally died after an Apple Genius rebooted it a dozen or so times. I have since read about the exact same thing happening to others, including a writer for The Atlantic magazine who had never had an issue with a Mac before. Do a back-up ASAP to make sure you don't lose anything and see about replacing the HDD. It is only about $140 for a new drive. The real issue is if you lose your data, too. So, make sure you do that back-up!

  • When i download any file it start in a second but when i pause the downloading file & after some time when i open it amessage flash 'download error' source file could not be read please try again later or contact the server administrator.

    when i download any file it works frequently and downloading start in a second but when i pause the downloading file & after some time when i open it,The downloading not start proper and after some time a message flash 'download error' source file could not be read please try again later or contact the server administrator.

    I downloaded the Microsoft Autoruns package and ran it.  There are no programs in the LSA Providers tab, and Apple's Bonjour is the only program in the Winsock Providers tab.  I also did the "netsh winsock reset" and rebooted.  It didn't fix the problem.  Any more ideas?

  • I just brought a apple protection plan as my phone warranty is going to end in a day, when i am trying to enter the protection plan code and my phone serial no its showing an error message try after some time is there any solution to that?

    i just brought a apple protection plan as my phone warranty is going to end in a day, after entering the protection plan code and my phone serial no its showing an error message "technical error try after some time", is there any solution for that?
    As i need the warranty to extend for another year please help me regarding this issue.
    When i bought a new iphone5 in Inda after using it for three days lock button was not working properly and it was warranty claimed and exchanged from apple service center in India, for the same phone I want to extend the warranty but its showing a error message is there any solution?

    Here is some information on the applecare +:
    http://www.apple.com/support/products/iphone.html
    It appears that you have to buy the applecare within 30 days of buying your phone - you said that your phone warranty is almost over, so when did you buy it??? That could be the explanation for the error.

  • I'm unable to deauthorize my computer.  Getting an error message "Unable to erase authorization.  Please try again after some time."

    I'm unable to deauthorize my computer.  Getting an error message "Unable to erase authorization. Please try again after some time."

    ok, please try below steps,
    1. Quit ADE.
    2. Choose Start > Run.
    3. In the Open text box, type regedit and then press Enter. The Registry Editor opens.
    4. In the left pane of the Registry Editor, locate the following registry key:
         HKEY_CURRENT_USER\Software\Adobe\Adept
    5. Right-click the Adept key and choose Delete.
    6. In the Confirm Key Delete dialog, click OK.
    Your authorization will be deleted.
    ADE will be deauthorized now.
    Now Authorize ADE again.

  • I've tried to update my ipad 2 with IOs 6 but it was not possible. An error message always appear after some time during e download. Is there an solution?

    I've tried to update my ipad 2 with IOs 6 but it was not possible. An error message always appear after some time during e download. Is there an solution?

    Are you trying to update via wifi or connected to your computer?
     Cheers, Tom

  • TS1702 ios 6 not updated in my new i pad, when i tried to update my i pad after some time a error massage shown and download stoped, same thing happen in i tune , i talked to apple customer care india , aftre talked them i disable my window firewall , and

    dear all i have facing promblem when i download ios 6 in itune, as well as in ipad, when i start download after some time or after 200 to 300mb it stop, and a error msg shown , i have talked to apple india cutomer care and after that i disabled my window firewall, and as well as my antivirius and i also disabled my modem firewall but after that still i m unable to update my new ipad with ios 6

    There is nothing in that other thread that clarifies what you did about Error 3014
    Here is the description of that error:
    Error 1004, 1013, 1638, 3014, 3194: These errors may be the result of the connection to gs.apple.com being redirected or blocked. Follow these steps to resolve these errors:
    Install the latest version of iTunes.
    Check security software. Ensure that communication to gs.apple.com is allowed. Follow this article for assistance with security software. iTunes for Windows: Troubleshooting security software issues.
    Check the hosts file. The restore will fail if there is an active entry to redirect gs.apple.com. Follow iTunes: Advanced iTunes Store troubleshooting to edit the hosts file or revert to a default hosts file. See section "Blocked by configuration: (Mac OS X/Windows) > Rebuild network information".
    Try to restore from another known-good computer and network.
    If the errors persist on another computer, the device may need service.

  • IE prompts credentials after some time and we get error rsHttpRuntimeClientDisconnectionError

    Hi all,
    Windows Server 2012
    Reporting Services 2012 SP2
    Internet Explorer 8
    After some time running a report the end user is asked for his credentials again with the authentication prompt.
    In the ExecutionLog we see the Client (IE) has its connection disconnected =
    rsHttpRuntimeClientDisconnectionError
    The server parameter are attached:
    We appreciate any clue.
    Thanks,
    Alex Berenguer
    Alex Berenguer

    Hi Alex,
    Per my understanding that you are running the report for sometime an then IE prompt for credential and you to this kind of error, right?
    Based on my research, the "rsHttpRuntimeClientDisconnectionError" error may occur if:
    Reporting Services creates the report and then goes to send it back to the client
    Reporting Services finds out that the connection has been closed and responds with the disconnection error.
    To resolve the issue, we can try to modify the TCP profile applied to the VIP. 
    Additionally, the issue may also occur due to a RESET coming from something between Report Server and the custom application. For example, an F5 NLB times these connections out on the either an HTTP or TCP level.
    If your problem still exists, please also check if you will got the same problem on the other browser(firefox)，you can also provide us more details information about the
    TimeDataRetrieval,TimeProcessing,TimeRendering in the ExecutionLog table.
    Similar thread for your reference:
    ssrs Report taking to much time to load
    If you still have any problem, please feel free to ask.
    Regards,
    Vicky Liu
    If you have any feedback on our support, please click
    here.
    Vicky Liu
    TechNet Community Support

  • Error! Check Activation and Can't Delete Authorization, getting "Please try after some time"

    Hello,
    I am getting "Error! Check Activation" error message when I try to download epub from acsm file. I found that I should erase and re-authorize. When I try to erase authorization I get, "Please try after some time."
    I need a solution.
    Thanks.

    try this
    I can't de authorize my computer. It just keeps saying to try again later.

  • HT4623 i was downloading and restoring uodates but after some time showed a txt an error occured. now i m unable to open my mobile jst showing apple sign on display

    i was downloading and restoring uodates but after some time showed a txt an error occured. now i m unable to open my mobile jst showing apple sign on display

    Hi shameemiubat,
    Thanks for visiting Apple Support Communities.
    You can use the steps in this article to restore your iPhone to working order:
    iOS: Unable to update or restore
    http://support.apple.com/kb/ht1808
    Best,
    Jeremy

  • How to handle TDMS -2519 error that appears after some time?

    Dear all,
    I am having two compactRio devices (cRIO-9074) that are applied for data logging and control. As is convenient, one deterministic loop handles the data acquisition, while another loop handles the data storage.
    The data storage loop basically creates a new TDMS file per data set that is subsequently stored to the disk.
    The whole software operates as expected for some time (at least one day without any issues), but then I get a File I/O error -2519 that is thrown by TDMS open. This error occurs after some time on both compactRio systems. How should I handle this error properly and what may be the probable cause?
    Upon system restart the error disappears and the system continues logging. Therefore, when having this error, I restart the system automatically, but this is to my opinion no proper solution. The fact that the error is cleared upon system restart, seems like it is a resource problem as outlined in: http://forums.ni.com/t5/Real-Time-Measurement-and/2519-error-trying-to-create-a-TDMS-file/td-p/26546... There they recommend using the FPGA programming mode to save on resources. However, I would like to continue using the Scanning Mode Interface instead. To better dedicate the processor resources, I changed the execution options of the different loops and gave Priority to the data acquisition and data storage loop. I also distributed the processes in different Execution Systems, to optimally divide tasks within the real-time processor.
    When I manually neglect the error (just clear the error in the data storage loop), the issue remains for the following data sets that need to be processed. So once the error is thrown, it reoccurs upon trying to store each subsequent data set.
    I also consulted http://forums.ni.com/t5/Real-Time-Measurement-and/tdms-2519-error/m-p/2569381/highlight/true#M13920 where the same error is reported and the solution is to update a .dll file in the installation. However, the installed software in my case appears to be okay. Also in that case, the problem occurred immediately, while in my case the problem arises after some time. Again this indicates towards a resource issue.
    Can you please provide me with some possible solution to overcome this problem? I am looking forward to your opinions. Contact me if anything is unclear within my explanation, or you need additional information.

    Hi gielvdbroeck,
    Good job for the perfect description and for the well researched topic!
    The first thing that comes to my mind is to Format and reinstall the software on the cRIO. This will make sure that you have a clean installation and there is no corruption in the OS.
    One more thing to get into account is the memory. If you do not have enough memory where to store the file it's possible to throw this error. 
    Best,
    Bozhidar

  • TS1814 i wana restore my iphone 3g but when i restore it with itunes after some time is say  '' iphone could not restored unknow error 1015 '' help me please

    i wana restore my iphone 3g but when i restore it with itunes after some time is say  '' iphone could not restored unknow error 1015 '' help me please

    99% because your iPhone was hacked/jailbroken. We cannot help you, see terms of use.
    Error 1015: This error is typically caused by attempts to downgrade the software for an iPhone, iPad, or iPod touch. This can occur when you attempt to restore using an older .ipsw file. Downgrading to a previous version isn't supported. To resolve this issue, attempt to restore with the latest iPhone, iPad, or iPod touch software available from Apple. This error can also occur when an unauthorized modification of the iOS has occurred and you're now trying to restore to an authorized, default state.

  • Hi guys i have an ipad 2 4.3.5. i cannot downgrade to 4.3.3 nor upgrade it to 5.1.1 nor to ios 6. in the first 2 its error 3194 in ios 6 after some time it shows network error everytime. tried a lot. even used my friend's pc. wat shall i do????

    hi guys i have an ipad 2 4.3.5. i cannot downgrade to 4.3.3 nor upgrade it to 5.1.1 nor to ios 6. in the first 2 its error 3194 in ios 6 after some time it shows network error everytime. tried a lot. even used my friend's pc. wat shall i do????

    No. You can not. The only thing you can do is update to the durrent version. iOS 6. Shut off your antivirus and firewall software during the update process. It can interfere. If you are using Kaspersky, you may need to remove it entirely.

  • On launching firfox v3.6.15 on windows vista this error message 'Script: file:///C:/Program%20Files/Mozilla%20Firefox/components/nsBlocklistService.js:648' is shown, after some time FF stops responding.

    I've noticed that it is taking longer for Firefox to start. On launching the apps I get this message ' I've noticed that it is taking longer and longer for Firefox (always the most up-to-date version) to start. After some time FF stops responding

    Create a new profile exclusively for the 4.0 beta version and create a desktop shortcut with -P "profile" appended to the target to launch that profile.
    * http://kb.mozillazine.org/Testing_pre-release_versions
    * http://kb.mozillazine.org/Creating_a_new_Firefox_profile_on_Windows
    * http://kb.mozillazine.org/Shortcut_to_a_specific_profile
    * http://kb.mozillazine.org/Using_multiple_profiles_-_Firefox

Maybe you are looking for

  • Sharp edges on MacBook Pro

    What chances are there of Apple changing it's sharp edge design on future Mac Book Pros? I've just returned a 13" MacBook Pro because the front edges are so sharp they left red marks on the the sides of my hands hurt after 2 hours of typing with the

  • Deletion of campaign

    Hi, can anyone tell me how to delete a campaign element when i try to delete it using the delete button,it gives a message saying that it is deleted but the element still remains there in system and i cannot create a  another campaign element using t

  • Is there any query analyser in sap

    Hi, I would like to know if is any query analyser in SAP like the we have in MS-Sql Server, so that I could paste a query from abap program and check the results instead of using abap debugger. regards Balaji

  • When Trying to Export a slid show for iPhoto to an EX Drive i get a OSStatus error-61 code-.Whats up .?

    When i try to export a slideshow from Iphoto to a Ex drive as it is loading i get a OSStatus error -61 code what gives ??? plz Help.

  • Audit Event Logging - attributes automatically converted to uppercase?

    Hi, we have the issue of registering auditing events; when we register a new audit event having our set of attributes, for some unknown reason all these attributes are changed to all capital letters, we can see it directly in the waveset database. Ho