BFG 8800GTX NOT working for me in my mac pro.

Well Da**it guys. I can NOT get the BFG 8800GTX to work in my mac pro.
The machine will boot but you do not hear the apple chime.
After that it just sits there and makes the cd rom drive click and the hard drives click and spinup as well.
It is NOT a power problem. I even tried an external 550 watt PS and that will not work either.
I even tried the other pcie slots and its a no go...well not sure what to do now. Sigh

Are you trying to get this card to run on your Mac Pro with Bootcamp, or OS X? A PC video card will NOT work under OS X as they are not compatible with the Mac's EFI firmware.
There have been people who have gotten PC video cards to work under Bootcamp, but I believe you still need to have a Mac compatible video card installed, just to get the machine to boot.
If you're trying to get this thing to work with Bootcamp, you may want to post in the Bootcamp forum.
http://discussions.apple.com/forum.jspa?forumID=1165

Similar Messages

SL server share mounting not working for 10.7.4 Mac Mini

I'm running about seven Macs on a network with a 10.6.8 Mac Mini server.
The older Macs (PPCs and 10.4.11) mount the share immediately.
Newer Macs recently have had a problem.
My 10.6.8 MBP can mount the share, from a dock icon, but it can take minutes.
Another Mac Mini (10.7.4) now refuses to mount the share manually. It can't make contact with the server share. I've tried via Ethernet and WiFi. It just hangs with Connect to Server.
And yet, it has no problem with the iCal server running on the server.
Another older MB and 10.6.8, mounts the share immediately.
Has anyone had newer hardware with 10.7.4 develop server connection problems?

Hi iToaster,
These were all good tips, and I tried or investigated them.
As it turns out, I noticed my SL Mac server needed a Java and securtiy update.
After installing, mount time on my Lion and SL client Macs was near normal, not minutes. (Again, my older Macs had mounted the server share quickly and normally, when the newer ones did not.)
My suspicion is that a modern OS sensed that the Java and security updates were not in place and took extra time to check the share mount in some manner.
Thank you for your time, experitse and ideas, iToaster!

Hot Synch does not work, Treo 755p, USB, 17" Mac Pro Laptop, even with RevD installed and Allow other HotSynch applications preference check box checked

Hi,
I am a long time Palm enthusiast who is frustrated. No more Palm products for me or anyone I speak to until I solve this problem. Someone at Palm should be paying attention to their long time cusotmers. I bought Palms in 2002 and 2003.
The support literature coming with two Treo 755p that I bought was so poor that never saw the fine print that there was three months of support if I registered the devices. The registration page does not let me register. All the fields are ghosted after I put in the serial number. I bought one in June 2008 and the other in early 2008. So never registered and can get no help from Palm now it seems.
So beside that gripe below is the problem issue info.
I can't get a Verizon Treo 755p to USB cable Hot Synch with my daughters 17" Mac Pro Laptop. It is using OS 10.5x She lives in another city so I am trouble shooting this remotely.
Did - Revd Palm upgrage has been installed.
PalmDesktopMac421Revd.dmg (17MB)
http://kb.palm.com/SRVS/CGI-BIN/WEBCGI.EXE/,/?St=4518,E=0000000000255177998,K=6239,Sxi=3,case=obj(33...
Did in advanced settings on the Treo select in the Synch preferences allow other Hot Sync applications.
That process worked however on my own Treo 755p Verizon as below:
After much work, hours over several months, I got my my Treo 755p Verizon to Hot Synch with a QuickSilver desk top Mac running os 10.5x.
Did the RevD upgrade.
Did in advanced settings on the Treo select in the Synch preferences allow other Hot Sync applications. Otherwise the Wireless Synch feature prevents a Hot Synch.
Once those both were done than Hot Synch works fine, and Wireless Synch works fine and does not interfere.
The Wireless on both PDAs is scheduled to be removed on both Treos due the economy on Feb. 4th, so I would like the HotSynch to be working so her Treo is backed up.
Thanks so much to anyone who replies to help out.
Best
Post relates to: Treo 755p (Verizon)
Post relates to: Treo 755p (Verizon)
This question was solved.
View Solution.

Works now, she had created a user ID as prompted when installing the HotSynch Software, but it was not the same name of the Treo 755p. The default ID was the one she from installing the software, so it showed nothing in address or contacts, but when she switched to the Treo ID than all her stuff was there.
Post relates to: Treo 755p (Verizon)

Dual monitor not working under Boot Camp on Mac Pro ATI HD 2600 XT

Recently got a brand new Mac Pro with ATI Radeon HD 2600 XT graphics card.
On the Mac side (Leopard), everything works perfectly: my second monitor (a plasma screen connected with HDMI to the second DVI of the ATI card via HDMI/DVI adapter) is fully recognized and it works as an extended desktop or in Mirroring mode.
Under Boot Camp (Windows XP Pro) however, NOTHING: the second monitor always appears in the display properties, but it is grayed out (inactive), and when I try to activate it, it switches back to being grayed out immediately and nothing gets displayed on it.
After reading all the posts I can find on the topic, I tried the following (in pretty much every possible combination - Thank god for WinClone that allows me to restore the Boot Camp basic install image without having to reinstall Windows from scratch every time):
a) Bootcamp 2.0 (installed by default by Bootcamp assistant)
b) Update to Bootcamp 2.1
1) Windows XP Pro SP2c vanilla install (from my Windows XP pro install disk)
2) Update to Windows XP SP3 (I tried with and without BC 2.1: both worked -> BC 2.1 didn't seem to be required for SP3 - maybe because this is a mac pro and not a MB or MBP)
i) ATI drivers installed by default by Boot Camp assistant (BC 2.0) or by BC 2.1
ii) Latest ATI drivers found on ATI web site specifically under Boot Camp / Mac Pro.
Note: Interestingly, the catalyst installer worked ok (provided .NET framework 2.0 is installed though), but it seems that the Radeon BootCamp/Mac Pro driver set itself from ATI's web site does NOT include a driver for the HD 2600 XT - so when I install this driver set, it tells me that no compatible hardware was found...
iii) Latest ATI drivers found under Windows XP (these did include one driver specifically for the Radeon HD 2600 XT)
NOTHING seems to work. I read posts (most of the from late last year) about ATI Catalyst utility showing a 3rd monitor at some point, but I never got any 3rd monitor showing in any of my many many trials with Catalyst. I have yet to get a single image appear on my plasma under Bootcamp Windows. I don't believe its the hardware because everything works great on the max OS X side.
I am actually considering switching to an NVidia 8800 GT just to get the dual screen to work under BootCamp/Windows XP because I really need it and I read everywhere that drivers for NVidia are far better than ATI ones.
Any advice? What should I try next before getting an 8800 ?
Is there a diagnostic utility that I can use to test my config including the GC?
Thanks!

Hi there aside from my laptop I have an iMac 20" with the same HD 2600 XT card. I recently installed the Catalyst 8.6 driver by using a driver mod from driverheaven, I use Vista 32. By installing it this way I got boosted performance and many issues with the bootcamp drivers were fixed. As you may already know the ATI drivers do not install on bootcamped macs usually but the mod tool fixes this. Its unofficial so do so at your own risk but try it out and see if you get the second monitor if not just rollback. Hope this helps and I didn't want to say too much about the 8.6 driver mod because it may not be allowed here but google will provide any answers.

Can anyone help with Terminal not working properly on 2013 (late) mac pro?

New 2013 (late) mac pro. 10.9.2 osx
Using Terminal utility and giving "cat" command, I get a return message of "file or directory not found" even though the files are right there. This is a little procedure I have performed with older mac pro and laptops (also Mavericks) and never had a problem.

Thank you for posting Linc. I worked it out, it is a case of user error.

Bluetooth not working for file transfer between Macs

I just got a MacBook Pro, with OS 10.6.1. My desktop is the iMac 2.66Ghz Intel with 10.5.8. I cannot get Bluetooth file transfers to work between the two.
I've got file sharing turned on for both machines. I've got all the frakkin' folders I need to transfer added to the file sharing list and all are set to "read & write" permission for every user I see in the list. Both machines can discover and seemingly connect to each other in Bluetooth.
However, I cannot send files between them; the connection just times out. I turned off the firewall on both machines. I've got file-sharing allowed on both machines. But the Macbook insists on only seeing the "public" folder on my iMac, but won't accept any files from it, and vice versa. I can't see anything on my iMac (and vice versa); I can't browse, I can't send.
I don't want to use the Migration -- I don't want to transfer everything under the sun to the laptop (and why in the WORLD Migration doesn't allow one to pick & choose what you want to migrate is beyond me), just specific files. Using my regular wireless connection, it's going to take over 6 hours. I want to get Bluetooth working -- it's irritating enough that the Firewire ports between my two Macs aren't the same type, so I can't use my existing firewire cable to do it, but this issue with Bluetooth is driving me up the wall.
Any suggestions? I've tried searching this forum, but can't seem to find anything that would fit my specific problem, and all the KB docs I've found, I've followed. HELP!

HI Chris,
Sharing files using Bluetooth
To share files using Bluetooth, you first need to make sure Bluetooth is turned on, and then use Bluetooth File Exchange to send a file.
To turn on Bluetooth:
Choose Apple menu > System Preferences and click Bluetooth.
Select the On checkbox. To allow other Bluetooth enabled devices to “discover” your computer and send files, also select the Discoverable checkbox.
Select “Show Bluetooth status in the menu bar” so you can quickly send files and perform other actions using the Bluetooth status menu in the menu bar.
To send files using Bluetooth:
Choose Send File from the Bluetooth status menu in the menu bar.
If the Bluetooth menu isn’t visible, choose Apple menu > System Preferences, click Bluetooth, and select “Show Bluetooth status in the menu bar.”
In the window that appears, select the file you want to send and click Send.
Select the device you want to send the file to and click Send.
If you don’t see the device you want to send the file to, make sure the device has Bluetooth turned on and is discoverable.
You do not need File Sharing turned on for Bluetooth technology.
Another way to share files between two Macs is How to use Firewire Target Disk Mode
Carolyn

Acrobat 9.0 serial not working for Acrobat XI update (Mac)

The subject line says it all. When I try to run my newly downloaded XI update, it requests a serial number for a qualifying product. I have Acrobat 9.0.0 Pro installed, and when I try to run XI, I get a window reading: "Serial Number you provided is valid, but a qualifying product could not be found on this computer."
Then I manually input the serial (correctly--I've triple checked), select Acrobat Professional 9.0 for Mac in the pull down menu and click "Next." I get an error message saying, "This serial number is not for a qualifying product. Please try another."
What the heck?

start here, http://helpx.adobe.com/creative-suite/kb/error-serial-number-valid-product.html
if that info fails to resolve the problem, contact adobe support https://helpx.adobe.com/contact.html

"Use this mailbox for" not working for Spam on one mac but fine on another

I have Mail running on my Macbook Pro using IMAP. I have a business email account and a personal email account both with the same mail provider. When I create the account it creates a folder under the IMAP folders for Sent, Trash and Spam. I highlight each of these and use the "Use this mailbox for" command to set them for Sent, Trash and Junk respectively. This moves the folders up under the Mailboxes section at the top of mail. Everything is great.
Now, exactly the same on my brand new iMac. When I get to the part about "Use this mailbox for", Sent and Trash work exactly the same as on the Macbook Pro but Spam stubbornly refuses to change and I am left with an extra folder under the IMAP folders.
I am using the same version of OS X, the same version of mail and exactly the same setting in mail preferences. I don't understand why I can't get the Spam folder to be used as Junk? ANyone out there got any ideas?

I have the same problem on my new MBP with Snow Leopard. I have multiple gmail accounts in Mail with IMAP. I can set the Sent/Drafts/Trash mailboxes to be used by Mail. But when I do the same with the Spam mailbox nothing happens at all.
This is really annoying as I now have to go through all of my Spam mailboxes manually to check if there is a false positive. This seems to be a bug in Apple Mail? I also tried to set up all my accounts again but it didn't help, same problem.

I have an event in my calendar that was sent by someone who does not work for the company anymore and I am reminded 2 times a week. How can I remove it?

I have an event in my calendar that was sent by someone that does not work for the company anymore and I am reminded 2 times a week. How do I delete it?

Tap on the event to open the event. Click the 'Edit' button in the event bubble, then press the 'Delete Event' button at the bottom of the Edit pop-up. It's a little different for events that come through Microsoft Exchange, you tap the event to bring up bubble and click the 'Details' button, and then press 'Decline' to remove the event.

IPhone 6 External Mic not working for Siri/Dictation

I am finding that the external mic on my iPhone 6 works for phone calls and voice memos, but does not work for Siri/Dictation. When I plug in the earbuds, they work for everything (including Siri/Dictation).
Was chatting to Apple support who had me reset all settings. I thought that worked, but realized that after a reset, Siri is off and I was talking to "Voice control" (which works). When I turned Siri back on, it does not work.
I have two questions for the community to see if you can help:
1- I have been assuming this must be a software problem since the mic does work for non-Siri access. But is that true? Is there a hardware component that Siri depends on which could be faulty here?
2- If it is software, what action should I try to address it? I have done a reset all settings already and that did not help.
Doug

Hi, everyone. I talked to Apple Genius at Apple Store last week, she said it should be a software issue and I needed to reset my iphone 6 plus as a new device and I can not use the backup restore from my iCloud, it was because the microphone bug or glitch can be in the backup also. Ok, followed her advice, erased all contents and set my iphone as a new device , the microphone worked for an hour, but went bad again. I used "voice memo" app from Apple to test the microphone. It is the best tool since it doesn't involve any provider's network and it doesn't need another person's phone to listen and test. If you can hear your voice recording clearly, then the mic works. I tested it 3-4 times a day for a few days now, half of the time the mic doesn't work. So, set as a new device isn't working. The issue is intermittent and it comes and goes as it likes, so very annoying. I carry my Apple EarPods with me in these past few days ust in case I need to make important phone calls. Will need to go back to Apple Genius this weekend for sure. Will give update after the weekend.

CALLER ID not working for International incoming calls

Hi,
I've a strange issue where CALLER ID not working for International incoming calls, it shows INTERNATIONAL UNKNOWN NUMBER in the phone display, but the number shows correclty in Verizon Call assistant !!!
Any clue?

yashshankar wrote:
Hi
I recently purschased an Online number but the caller id does not work for incoming calls.How do we resolve this problem?.
Regards
Yash
You didn't mention what country your Online Number is in. Not all of Skype's Online Numbers are eligible for use as Caller ID when calling telephones or sending SMS messages. If your number is from one of these countries (Chile, Denmark, Estonia, Hong Kong, Poland, Sweden, the UK and the US), then it can be used this way. Otherwise, you can use a mobile number from countries other than Japan or Mexico as Caller ID with Skype, after the number goes through a verification process where Skype sends SMS messages with codes to that number.
To get to these settings, log into your Skype account here on the Skype web site using the "Account" link at the top of this page. You'll see a screen that would include your current Caller ID settings, and a link to change that. If your Online Number is from one of those countries I referenced above, just select it and you're done.
Hope that helps!
Patrick
Location/Ubicacion: Arizona USA
Time Zone/Hora Local: UTC/GMT -7
If this message has adequately addressed your issue, please click on the “Accept as Solution” button. If you found a post useful then please "Give Kudos" at the bottom of my post, so that this information can benefit others.
Si esto mensaje le ha ayudado, por favor haga clic en "Aceptar como solución". Si encuentra un mensaje útil, por favor "Da Kudos" al final del mensaje, por lo que esta información puede beneficiar a otros.
I am not a Skype employee. No soy un empleado de Skype.

Select All in a table does not work for Drag and Drop

Hi. I am using Jdeveloper 11.1.1.2 but have also reproduced in 11.1.1.3.
I am trying to implement drag and drop rows from one table to another. Everything works fine except when I do a Select All (ctrl-A) in a table, the table visually looks like all rows are selected, but when I try to click on one of the selected rows to drag to the other table, only the row I click on is dragged.
I tried setting Range Size -1, fetch mode to FETCH_ALL, content delivery to "immediate" but nothing works.
I even have reproduced not using a view object but just a List of beans with only 5 or 10 beans showing in the table.
Does anyone know how to get Select All to work for a Drag Source?
Thanks.
-Ed

Frank-
OK, thanks for looking into that. I also submitted this service request, which includes a simple sample app to demonstrate the problem:
SR #3-2387481211: ADF Drag and Drop does not work for rows in table using Select All
Thanks again for the reply.
-Ed

Form Designed in LiveCycle will not work for End User

Please Help!
I am a newbie to Adobe LiveCycle but recognized the utility in the program, so decided to give it a while to try and streamline some of my employer's forms. After spending too much time learning how to design a form (much to the dislike of my boss), I am finally going to have to ask for some help. So here's the deal:
I've designed a dynamic pdf in LiveCycle with two master pages and two repeating flowed subforms. The first repeating subform is basically an expanding table intended to be used as a photographer's log where they can log each photo taken with the camera. The expanding table has some code with a button at the top for the end user to enter the number of photos on the photo roll, click submit, and table expands to however many instances of rows are needed for each photo that was taken. The second subform is basically an image field and text fields used as photo captions/photo compilation pages. When the end user clicks submit on the first subform to expand the table, I also have javascript in that click event to also create same amouint of instances of the second subform (the photo compilation page(s)). Each text field for the photo caption on the second subform is populated by the data entered into the photo log table cells. I was able to find a script to correctly populate those fields for each instance of the table. Wish I had the form here, but it's at work at the moment.
My problem is this: I've scratched and clawed to get all of the forms expanding correctly and the scripts populating each instance of the fields correctly and everything works great in LiveCycle preview. I then saved the form as PDF for use by my field crew personnel (whom all use, at the very least, Adobe Pro 9, but most Pro X). I sent the new form to them and they move it to their desktop, open it with Adobe Pro, and populate all of the fields and everything works swimmingly. However, once they save it, it gets all jumbled and they can't even print it. We even thought we found a workaround by entering all data and printing to PDF, but even that has turned out to not work. I checked to make sure that I designed and saved the form in LiveCycle for use with the Adobe Pro versions, but still not working for my end users.
Anyone have any thoughts on my long explanation?? Please HELLLLPPPP!

The error(s) occur when trying to save the document. I want each user to tell the first page how many rows they will need in the photo log table, so they would enter however many photos were taken in the box: "Number of Photos on Roll:" ---> Then click the "Submit" cmd button. That should expand the table. Once it expands, it should also add the same amount of instances of the photo compilation page (2nd Page) as there are rows in 1st page table. Then the user will populate each cell of the table on page 1 with data. The data entered into the page 1 table cells will populate the text fields (photo caption) in Page 2 once the user clicks on the "Populate Captions!" cmd button in the lower left corner of the table on Page 1.
The problem is in the distributing of the form to the user so they can save the form after populating the data. I did a test run this morning and for some reason it did do the "print to PDF" correctly for 5 photos on the roll (though this has not been happening every time and especially for a large number of pages, ie. 80 photos). However, after entering the data for 5 rows on page 1 and then populating the 5 photo compilation pages, I saved a copy as "Save As PDF" and closed the document. Then re-opened the copy in Acrobat Pro X. The new copy:
-had 5 additional rows added to Page 1
-Duplicates of some of the fields
-Only retained the 1st instance of the Second Page (Photo w/ Caption) and not all fields were populated
Again, this all works fine in the LiveCycle Preview but not anywhere else. I do not have this set up to be linked to an external data source (YET) but there is javascript in the cmd buttons. I also do not want to distribute this form to end users and then collect the data back from them. I want them to be able to save a copy of my LiveCycle designed form, open in Adobe Pro, populate the data and save as many copies as needed for form production.

Wake on Demand: Not working for some services, others OK

I haven't been able to figure this problem out... Wake on Demand for a previous generation Mac mini running Snow Leopard 10.6.8 works for things like a CrashPlan automated backup but does not work for things like remote SSH login or Screen Sharing. In all cases, the services are being originated on a latest generation iMac running Mac OS X Lion (10.7.2).
While it's not an earth-shattering event to get off my backside and walk over to the Mac mini across the house to press its Shift key to waken the thing, it gets rather old to have to keep doing so, especially since CrashPlan automated backups are taking place while the Mac mini is otherwise asleep (the sleep indicator is slowly pulsing).
I've been through the Apple tech notes regarding Wake on Demand for Snow Leopard 10.6 and have ensured that AirPort and its network are at the top-most position in their respective lists. Other than that, I'm not sure what else I can do. Wake on Network is enabled in the Snow Leopard Mac mini's network System Preferences and there doesn't seem to be any on/off option in the AirPort Extreme base station (just recently updated to 7.6 firmware).
Any thoughts... hints... suggestions?
One final note: this Mac mini is new as of July 2011; just days before the latest generation of Mac mini came out. It came pre-installed with Snow Leopard and, as soon as the users of this mini find software replacements for the old PPC style applicaitons they're used to using, will be upgraded to Lion. However, I feel a bit unsettled in making the move to Lion if I can't get a Snow Leopard feature to work properly. There's no telling if the Lion upgrade will actually fix this behavior or make it worse.
Thanks in advance.

I don't think you can wake on network with a closed lid. Try keeping the lid open and putting the machine to sleep. Does it work?

DNS not working for some computers

We have a SRP521W router and is set up with one SSID for wireless. In our office all the computers (5) can connect but only some may get on the internet. I have a laptop I am testing with and it will not connect, wired or wireless.
I found an article relating to flushing DNS, tried that, no luck.
I found another that said I should try setting my DNS to 208.67.222.222 and this worked, internet works fine.
I tried rebooting the DSL modem and router, tried many different things but am not a networking guru so I am just not sure why the DNS is not working for one computer but works for another, connected to same LAN or SSID.
Thanks,
Brad

Though what Don posted is one way to accomplish it, I never add anything to my DNS and it works fine. Windows DNS, in a default installation, will automatically forward to the root (.com, .edu, .gov, etc.). So I always just point my workstations
to my Domain Controller as their DNS and everything works just fine without any additional configuration.
Guess I'm one of those who won't even trust Google for sharing a DNS, particularly when I have never needed to set up any forwarders.
.:|:.:|:. tim

BFG 8800GTX NOT working for me in my mac pro.

Similar Messages

Maybe you are looking for