Bfile columns not working for files in network

Hello all,
I have made a table with a column of type bfile. When i call the function bfilename(<alias-dir>,<filename>) it works fine as long as the alias-directory is mapped to a physical drive on the machine(Windows NT) on which the database is running. But if i specify a network directory which has been mapped to a drive say "F:/" then the same is not working.
Can anyone pls tell me what the problem is? And is there a solution to the same?
Thanks
Mazhalai

This is maybe a security problem. I think the "oracle" user is not allowed to access the network files.

Similar Messages

EOIO is not working for file- BPM- Proxy scenario.

Hi All,
I have one File to BPM (Merge pattern ) to Proxy scenario.
I have two file communication channel at the sender side and defined QOS as EOIO for both. In SXMB_MONI it assings same queue for all messages.
BPM is merging that messages. However during that it assings different queue for merged messages.
When it comes to proxy , again different queues are assingned to the messages.
Is there any way I can define QOS in BPM or at the proxy side ( I know it should be at the sender side only , but it's not working..)
Thanks & Regards,
Dijesh Tanna.

HI,
Within the current release the BPM will always only use EO (SAP Note 833740).
May be the SAP note 905049 will help you on this ...
Thanks
Swarup

Backup not working for File Server

We have System Center 2012 Sp1 installed with Agent Version : 4.1.3453.0
We are protecting File Server which is member in DFS. We have Volume of More than 2TB and which is spanned accross multiple VHDs.
I am facing problem with Backup not working and DPMRA service is getting stopped unexpectedly. When i try to create recovery point manually i don't get option to syncrhonize the changes. 1st and 3rd option is geryed out.
I am getting Error on DPM as Affected area:   E:\
Description:   The replica of Volume E:\ on<ServerName> is inconsistent with the protected data source. All protection activities for data source will fail until the replica is synchronized with consistency check. You can recover data
from existing recovery points, but new recovery points cannot be created until the replica is consistent.
For SharePoint farm, recovery points will continue getting created with the databases that are consistent. To backup inconsistent databases, run a consistency check on the farm. (ID 3106)
   DPM failed to communicate with the protection agent on <Server> because the agent is not responding. (ID 43 Details: Internal error code: 0x8099090E)
   More information
Recommended action:   1) Check recent records from the DPMRA source in the Application Event Log on FUSE.win2k.internal to find out why the agent failed to respond.
2) Make sure that the DPM server is remotely accessible from <Server>
3) If a firewall is enabled on the DPM server, make sure that it is not blocking requests from <Server>
4) Restart the DPM Protection Agent service on <Server>. If the service fails to start, re-install the protection agent.
   Synchronize with consistency check.
   Run a synchronization job with consistency check...
Resolution:   To dismiss the alert, click below
   Inactivate
I have Re-installed Agent but it is not helping.
I have Other Volume labeled as F: and sized at 600 GB. Backup of that Volume is working fine for Same server.
Please Suggest how to troubleshoot.
Thanks in Advance.
Swapnil
Thanks, Swapnil Prajapati

HI Chris,
Sharing files using Bluetooth
To share files using Bluetooth, you first need to make sure Bluetooth is turned on, and then use Bluetooth File Exchange to send a file.
To turn on Bluetooth:
Choose Apple menu > System Preferences and click Bluetooth.
Select the On checkbox. To allow other Bluetooth enabled devices to “discover” your computer and send files, also select the Discoverable checkbox.
Select “Show Bluetooth status in the menu bar” so you can quickly send files and perform other actions using the Bluetooth status menu in the menu bar.
To send files using Bluetooth:
Choose Send File from the Bluetooth status menu in the menu bar.
If the Bluetooth menu isn’t visible, choose Apple menu > System Preferences, click Bluetooth, and select “Show Bluetooth status in the menu bar.”
In the window that appears, select the file you want to send and click Send.
Select the device you want to send the file to and click Send.
If you don’t see the device you want to send the file to, make sure the device has Bluetooth turned on and is discoverable.
You do not need File Sharing turned on for Bluetooth technology.
Another way to share files between two Macs is How to use Firewire Target Disk Mode
Carolyn

Bluetooth not working for file transfer between Macs

I just got a MacBook Pro, with OS 10.6.1. My desktop is the iMac 2.66Ghz Intel with 10.5.8. I cannot get Bluetooth file transfers to work between the two.
I've got file sharing turned on for both machines. I've got all the frakkin' folders I need to transfer added to the file sharing list and all are set to "read & write" permission for every user I see in the list. Both machines can discover and seemingly connect to each other in Bluetooth.
However, I cannot send files between them; the connection just times out. I turned off the firewall on both machines. I've got file-sharing allowed on both machines. But the Macbook insists on only seeing the "public" folder on my iMac, but won't accept any files from it, and vice versa. I can't see anything on my iMac (and vice versa); I can't browse, I can't send.
I don't want to use the Migration -- I don't want to transfer everything under the sun to the laptop (and why in the WORLD Migration doesn't allow one to pick & choose what you want to migrate is beyond me), just specific files. Using my regular wireless connection, it's going to take over 6 hours. I want to get Bluetooth working -- it's irritating enough that the Firewire ports between my two Macs aren't the same type, so I can't use my existing firewire cable to do it, but this issue with Bluetooth is driving me up the wall.
Any suggestions? I've tried searching this forum, but can't seem to find anything that would fit my specific problem, and all the KB docs I've found, I've followed. HELP!

HI Chris,
Sharing files using Bluetooth
To share files using Bluetooth, you first need to make sure Bluetooth is turned on, and then use Bluetooth File Exchange to send a file.
To turn on Bluetooth:
Choose Apple menu > System Preferences and click Bluetooth.
Select the On checkbox. To allow other Bluetooth enabled devices to “discover” your computer and send files, also select the Discoverable checkbox.
Select “Show Bluetooth status in the menu bar” so you can quickly send files and perform other actions using the Bluetooth status menu in the menu bar.
To send files using Bluetooth:
Choose Send File from the Bluetooth status menu in the menu bar.
If the Bluetooth menu isn’t visible, choose Apple menu > System Preferences, click Bluetooth, and select “Show Bluetooth status in the menu bar.”
In the window that appears, select the file you want to send and click Send.
Select the device you want to send the file to and click Send.
If you don’t see the device you want to send the file to, make sure the device has Bluetooth turned on and is discoverable.
You do not need File Sharing turned on for Bluetooth technology.
Another way to share files between two Macs is How to use Firewire Target Disk Mode
Carolyn

Why does double-click not work for files of Firefox type under Windows 7 (Firefox 15.0.1)?

If in the Windows Explorer of Windows 7 I double-click the name of a file that is mentioned as being a Firefox file by its file type symbol, it should be launched. But this doesn't happen. If I select "Open with" > Firefox" in the file's context menu, nothing happens. But if I select another browser, the file will be launched.

Hi,
You can try to right-click a file > '''Open with''' > '''Choose default program''' > '''Browse''' (disregard any existing entry) and select Firefox, and also enable (tick) '''Always use the selected program to open this kind of file'''.

Clob is not working for bulk data files in PL/SQL XML program

Hi Odie,
we took your help to fix the our issue before
"https://forums.oracle.com/forums/thread.jspa?threadID=2238458&tstart=105"
working fine for : program is working for smaller size data.
Issue : now we have problem with the largr size data .
getting the below error:
Arguments
P_dir_name='/tmp'
P_file_name='CCBGO.COLO_CNG.RESPONSES.20120802.00054131826'
Environment will now switch to UTF-8 code-set.
Parts of this log file may not display correctly
as a result. This is an expected behavior.
XML_REPORTS_XENVIRONMENT is :
/apps/applmgr/product/OFDEV/ofdevora/806/guicommon6/tk60/admin/Tk2Motif_UTF8.rgb
XENVIRONMENT is set to /apps/applmgr/product/OFDEV/ofdevora/806/guicommon6/tk60/admin/Tk2Motif_UTF8.rgb
Current NLS_LANG and NLS_NUMERIC_CHARACTERS Environment Variables are :
American_America.UTF8
stat_low = 8B
stat_high = 0
emsg:was terminated by signal 11
Appreciated for your earlier support.
Kindly suggest .
Many Thanks,
Ramesh.

Thanks ALex,
your are true it is concurrent program error ,
but it is working for small amount of data and generating the output and it is not working for larger data.
i have placed the code which i have used kindly suggest where i am going wrong.
i am calling the .rdf through the concurrent program, i've used the below query in RDF
select
BATCHHEADER
,BATCHTRAILER
,RqUID
,Severity
,PmtRefId
,StatusDesc
,ErrorDesc
,AsOfDate
,AsOfTime
,RqUID1
,SPRefId
from table(CL_CXFRFXFH_PKG.rcacknowledgments(:P_dir_name,:P_file_name));
kindly find the below code for the package CL_CXFRFXFH_PKG.
==========================
CREATE OR REPLACE package body APPS.CL_CXFRFXFH_PKG is
function rcacknowledgments (p_directory in varchar2, p_filename in varchar2)
return TRecordTable pipelined
is
nb_rec number := 1;
tmp_xml clob;
tmp_file clob;
rec TRecord;
begin
dbms_lob.createtemporary(tmp_file, true);
tmp_file := dbms_xslprocessor.read2clob(p_directory, p_filename);
rec.BATCHHEADER := regexp_replace(tmp_file, '.*<BATCHHEADER>(.*)</BATCHHEADER>.*', '\1', 1, 1, 'n');
rec.BATCHTRAILER := regexp_replace(tmp_file, '.*<BATCHTRAILER>(.*)</BATCHTRAILER>.*', '\1', 1, 1, 'n');
loop
tmp_xml := regexp_substr(tmp_file, '<\?xml[^?]+\?>\s*<([^>]+)>.*?</\1>', 1, nb_rec, 'n');
exit when length(tmp_xml) = 0;
--dbms_output.put_line(tmp_rec);
nb_rec := nb_rec + 1;
select RqUID, Severity, PmtRefId, StatusDesc, ErrorDesc, AsOfDate, AsOfTime, RqUID1, SPRefId
into rec.RqUID
, rec.Severity
, rec.PmtRefId
, rec.StatusDesc
, rec.ErrorDesc
, rec.AsOfDate
, rec.AsOfTime
, rec.RqUID1
, rec.SPRefId
from xmltable(
'/CMA/BankSvcRq' passing xmltype(tmp_xml)
columns RqUID varchar2(3000) path 'RqUID'
, Severity varchar2(3000) path 'XferAddRs/Status/Severity'
, PmtRefId varchar2(3000) path 'XferAddRs/Status/PmtRefId'
, StatusDesc varchar2(3000) path 'XferAddRs/Status/StatusDesc'
, ErrorDesc varchar2(3000) path 'XferAddRs/Status/ErrorDesc'
, AsOfDate varchar2(3000) path 'XferAddRs/Status/AsOfDate'
, AsOfTime varchar2(3000) path 'XferAddRs/Status/AsOfTime'
, RqUID1 varchar2(3000) path 'XferAddRs/RqUID'
, SPRefId varchar2(3000) path 'XferAddRs/SPRefId'
pipe row ( rec );
end loop;
dbms_lob.freetemporary(tmp_file);
return;
end;
end;
============================================
Many Thanks,
Ramesh.

What's This Help not working for one entry in each header file

I have a large RoboHelp project that I have imported into Version 8 from a previous version. Prior to the import into Version 8, all of the What's This Help in the project was working perfectly; now, post-import, I have a problem.
Firstly, some background information.
My project contains a large number of individual header (.H) files, one for each dialog within the software. These header files, which have been generated and provided by our developers, contain one entry for each field on the dialog to which the header file relates. The header files are all contained within a \HTML Topics\Fields\ folder (going from the root of my Help project).
Each header file has a corresponding text (.TXT) file. These text files contain entries that correspond to the entries in the relevant header file. The text files are also contained within the \HTML Topics\Fields\ folder.
Below is an example of the contents of a header file:
#define IDH_HIERARCHY_APPEARANCE_HIEARCHY_LIST          16811
#define IDH_HIERARCHY_APPEARANCE_ADD_APPEARANCE         16812
#define IDH_HIERARCHY_APPEARANCE_REMOVE_APPEARANCE      16813
Below is the contents of the corresponding text file:
.topic IDH_HIERARCHY_APPEARANCE_ADD_APPEARANCE
Click this button to add a new row of hierarchical appearance settings to the grid.
.topic IDH_HIERARCHY_APPEARANCE_HIEARCHY_LIST
Use this grid to define hierarchy appearance settings. Each row in the grid represents a level of the hierarchy. For example, the appearance settings you define for the first row apply to the top level of hierarchy, the settings you define for the second row apply to the second level, and so on.
.topic IDH_HIERARCHY_APPEARANCE_REMOVE_APPEARANCE
Click this button to delete the selected row of hierarchical appearance settings from the grid.
The What's This Help that was part of the original project still works perfectly. However, after upgrading the project to RoboHelp Version 8, I have had to update the project to reflect changes to the software. As part of this work, I have imported some new header files and updated some existing ones - and edited the corresponding text files accordingly.
The What's This Help that is covered by the header files that I have imported since the upgrade to RoboHelp Version 8 does not work correctly; in each case, the What's This Help does not work for whichever field appears at the top of the appropriate text file. The position of the entry in the corresponding header file does not make a difference.
If I manually edit a text file to move a different entry to the top then recompile the Help project, the What's This Help does not work for the field that now appears at the top of the text file - and the What's This Help for the field that used to appear at the top of the text file now works.
I've tried everything I can think of to fix this, but nothing has worked. It seems as if there is a problem in the way RoboHelp is compiling the header and text files.
If I use Microsoft HTML Help Workshop to decompile the CHM file, then view the contents of the resulting, decompiled text files, the affected files appear as follows:
.topic IDH_HIERARCHY_APPEARANCE_ADD_APPEARANCE
Click this button to add a new row of hierarchical appearance settings to the grid.
.topic 16811
Use this grid to define hierarchy appearance settings. Each row in the grid represents a level of the hierarchy. For example, the appearance settings you define for the first row apply to the top level of hierarchy, the settings you define for the second row apply
to the second level, and so on.
.topic 16813
Click this button to delete the selected row of hierarchical appearance settings from the grid.
Note how the entry at the top - which relates to the What's This Help that doesn't work - appears differently to the other entries which do work. The name of the ID appears after ".topic" rather than the appropriate ID number.
Any help that anyone can provide me with would be very much appreciated.
Thank you,
Mark

Its working now. We just kept trying to reinstall the tools and restarting indesign. On the 4th time the buttons started working. I can't explain why it finally worked, just that it is working now.

Document library open in client application not working for img,pdf,txt files

In an office 365 sharepoint site i have enabled open in client applicartion for document library but it is not working for image/txt/pdf files for word and excel files it is working fine. I have even turned on the feature open document in client application
by default from site collection features also but there is no change.
Please advice.
Regards,
Chaitanya

Hi Chaitanya,
The feature is currently designed to be used with HTTPS, and will not work as expected with the HTTP connection available on Office 365 for professionals and
small businesses sites.
To take advantage of this update, do the following steps:
Wait for the update to the SharePoint Online service, which is in progress now.
Upgrade Adobe Reader to the version 10.1.2 client.
Add your SharePoint Online root URL/domain to the Trusted Sites security zone in Internet Explorer1 (e.g.,
https://contoso.sharepoint.com).
Check the Keep me signed in box when you log in to a SharePoint Online site.
This
SharePoint Online update is currently
being rolled out worldwide along with several other new features.
Best regards.
Thanks
Victoria Xia
TechNet Community Support

CsrAttachmentUploadDiv part attachment is not rendered SP 2013(Attach file in not working for all the list forms)?

csrAttachmentUploadDiv partattachment is not rendered SP 2013(Attach file in not working for all the list forms)?
Ravi
function ShowPartAttachment() {
ULSopi:
    if (document.getElementById("part1") == null || typeof document.getElementById("part1") == "undefined") {
        alert(Strings.STS.L_FormMissingPart1_Text);
        return;
    (document.getElementById("part1")).style.display = "none";
    (document.getElementById("partAttachment")).style.display = "block"; //problem here

Am also facing the similar problem....any iputs are highly appriciated.
Issue..
1) Defined the attachment type in IMG.
2) Added the attachment type "SFREEATTM" by selecting other attributes---> Attachment Types.
3) Attached the excel file in the design.
See the screen shot below:
The Issue is when testing through tcode nwbc in the inbox the attachment tab is not visible after selecting the particular form.
Please see the screen shot below:
Did i miss any Configuration?? Please suggest...
Regards,
Naveen

I bought creative suite cs6 design standard student and teacher edition and the download did not work properly - files appear incomplete/ or damaged - none of the program items work at all. File size for installation seems very small for a product of this

I bought creative suite cs6 standard student and teacher edition and the download did not work properly - files appear incomplete/ or damaged. File size seems very small for a product of this size. Can you assist with download issue or provision of software ?

Lalalaladog where did you download CS6 from? I would recommend downloading the installation files for Creative Suite 6 Design Standard at Download CS6 products

Software Update Point Switching is not working for some Clients

Hi there,
I found nothing similar here and I hope this is the right section.
I´m running ConfigMgr 2012 R2 where one of the Site Systems from one of the Primaries is located in an untrusted Forest in a perimeter Network. The Site System there has the MP, SUP and DB Roles. In general it works great. The Systems in that untrusted Forest
get the SCCM Agent pushed, see and can install published Software packages and receive Windows Updates. But there are a few systems where everything works, except Windows Updates.
So I had a deeper look at what is happening and found out that the SUP switching is not working for them. They always try to contact the SUP from the Primary, which they cannot reach (this is intended).
From how I understand SUP switching as described here
http://blogs.technet.com/b/configmgrteam/archive/2013/03/27/software-update-points-in-cm2012sp1.aspx#pi140062=1
the Windows Update Agent tries to connect to a SUP every 30 minutes and after 4 failed attempts he will try to connect to the next one until he finds one which works.
As I said before, this seems to work for most systems in the untrusted forest, but some do not make any intentions to switch the SUP.
So my next step was to find out from where the Update Agent can get the information of the available SUPs. I think they either don´t receive the information that other SUPs exist, or if the Information is there, they don´t realize that there´s an error and
make no attempt to switch.
I used the System Center Support Center to gather all Information from some of the systems with that problems (Log Files, WMI information, registry information, policies etc.) but I cannot find where SCCM or the Update Agent store the information which SUPs
are available in my environment.
I´m sure the problem is on the Systems which fail to connect to the right SUP and not in the SCCM infrastructure itself, because for most of the systems everything is working just perfect. Unfortunately in the Blog Post above there´s also no information
where this information is stored and how it is obtained by the clients. In the comments there´s even one post which describes the same problem I have here, but there was no answer. I hope someone can point me into the right direction, because I´m stuck currently.
Things I tried additionally to all the log file / WMI / registry sniffing:
Removing the Software Distribution Folder and restarting the Windows Update Agent
Removing the WindowsUpdate Registry folder in the HKLM\SOFTWARE\Policies\Windows section in the Registry and restarting the Windows Update Agent.
Tried to reset the WUAgent with wuauclt /Resetauthorization additionally to the steps above.
I also tried to manually set the WUServer and WUStatusServer Keys in the registry to the new Server, but as soon as the next Update Scan cycle runs, the value is set back to the URL of the Primary Sites SUP
Is someone having additional ideas? It seems to me older systems are more affected (which were configured for a standard WSUS before SCCM 2012 was deployed) than newer ones which were installed when SCCM was in place already. But I don´t know what else to
"reset" on those machines without reinstalling them.

Thank you very much for your response. I must have missed that one by looking through numerous Logfiles. In this, there´s indeed a list of all available SUPs. So according to the LocationServices.log the machine should have a choice.
The WMI Key however, contains just one entry and this is the URL of the Primaries SUP which is not reachable in the untrusted forest. Is it OK that the WMI entry includes only one entry? If yes, what process is putting the results from the LocationServices
into WMI? It seems like the Windows Update Agent is feeded from the WMI Key then. If this is the case my problems seems to be the "communication path" between these two components.
Is this the job from the SCCM Agent, the Windows Update Agent or maybe some third component I´m not aware of? I wonder how I can fix this.

IPhone 6 External Mic not working for Siri/Dictation

I am finding that the external mic on my iPhone 6 works for phone calls and voice memos, but does not work for Siri/Dictation. When I plug in the earbuds, they work for everything (including Siri/Dictation).
Was chatting to Apple support who had me reset all settings. I thought that worked, but realized that after a reset, Siri is off and I was talking to "Voice control" (which works). When I turned Siri back on, it does not work.
I have two questions for the community to see if you can help:
1- I have been assuming this must be a software problem since the mic does work for non-Siri access. But is that true? Is there a hardware component that Siri depends on which could be faulty here?
2- If it is software, what action should I try to address it? I have done a reset all settings already and that did not help.
Doug

Hi, everyone. I talked to Apple Genius at Apple Store last week, she said it should be a software issue and I needed to reset my iphone 6 plus as a new device and I can not use the backup restore from my iCloud, it was because the microphone bug or glitch can be in the backup also. Ok, followed her advice, erased all contents and set my iphone as a new device , the microphone worked for an hour, but went bad again. I used "voice memo" app from Apple to test the microphone. It is the best tool since it doesn't involve any provider's network and it doesn't need another person's phone to listen and test. If you can hear your voice recording clearly, then the mic works. I tested it 3-4 times a day for a few days now, half of the time the mic doesn't work. So, set as a new device isn't working. The issue is intermittent and it comes and goes as it likes, so very annoying. I carry my Apple EarPods with me in these past few days ust in case I need to make important phone calls. Will need to go back to Apple Genius this weekend for sure. Will give update after the weekend.

Wake on Demand: Not working for some services, others OK

I haven't been able to figure this problem out... Wake on Demand for a previous generation Mac mini running Snow Leopard 10.6.8 works for things like a CrashPlan automated backup but does not work for things like remote SSH login or Screen Sharing. In all cases, the services are being originated on a latest generation iMac running Mac OS X Lion (10.7.2).
While it's not an earth-shattering event to get off my backside and walk over to the Mac mini across the house to press its Shift key to waken the thing, it gets rather old to have to keep doing so, especially since CrashPlan automated backups are taking place while the Mac mini is otherwise asleep (the sleep indicator is slowly pulsing).
I've been through the Apple tech notes regarding Wake on Demand for Snow Leopard 10.6 and have ensured that AirPort and its network are at the top-most position in their respective lists. Other than that, I'm not sure what else I can do. Wake on Network is enabled in the Snow Leopard Mac mini's network System Preferences and there doesn't seem to be any on/off option in the AirPort Extreme base station (just recently updated to 7.6 firmware).
Any thoughts... hints... suggestions?
One final note: this Mac mini is new as of July 2011; just days before the latest generation of Mac mini came out. It came pre-installed with Snow Leopard and, as soon as the users of this mini find software replacements for the old PPC style applicaitons they're used to using, will be upgraded to Lion. However, I feel a bit unsettled in making the move to Lion if I can't get a Snow Leopard feature to work properly. There's no telling if the Lion upgrade will actually fix this behavior or make it worse.
Thanks in advance.

I don't think you can wake on network with a closed lid. Try keeping the lid open and putting the machine to sleep. Does it work?

DNS not working for some computers

We have a SRP521W router and is set up with one SSID for wireless. In our office all the computers (5) can connect but only some may get on the internet. I have a laptop I am testing with and it will not connect, wired or wireless.
I found an article relating to flushing DNS, tried that, no luck.
I found another that said I should try setting my DNS to 208.67.222.222 and this worked, internet works fine.
I tried rebooting the DSL modem and router, tried many different things but am not a networking guru so I am just not sure why the DNS is not working for one computer but works for another, connected to same LAN or SSID.
Thanks,
Brad

Though what Don posted is one way to accomplish it, I never add anything to my DNS and it works fine. Windows DNS, in a default installation, will automatically forward to the root (.com, .edu, .gov, etc.). So I always just point my workstations
to my Domain Controller as their DNS and everything works just fine without any additional configuration.
Guess I'm one of those who won't even trust Google for sharing a DNS, particularly when I have never needed to set up any forwarders.
.:|:.:|:. tim

Thunderbird Mission Control Desktop/AutoConfig not working for some users

I have the file: "C:\Program Files (x86)\Mozilla Thunderbird\defaults\pref\custom.js"
It contains:
pref("general.config.obscure_value", 0);
pref("general.config.filename", "TMcustom.cfg");
I have the file: "C:\Program Files (x86)\Mozilla Thunderbird\TMcustom.cfg"
It contains:
var promptService = Components.classes["@mozilla.org/embedcomp/prompt-service;1"]
.getService(Components.interfaces.nsIPromptService);
promptService.alert(null, "title", "testing");
For most of my users the alert pops up fine when I start Thunderbird, but for a few it doesn't. All of the machines where setup with the same install script. If I log into one of the machines where it's not working as a different user, then it works fine, so I know the files are in the right spot. So why would it not work for specific users? Is there something in the user's Windows profile that could cause it to not work? Or are there any other suggestions?

As it turns out this was a known bug that was corrected in the recent release of Java 7_65 and Java 8_11. Here is a link to the bug description in the database.
Bug ID: JDK-8019274 RMI thread can no longer call out to AWT thread for webstart app

Bfile columns not working for files in network

Similar Messages

Maybe you are looking for