BGB inbox parser issue

So today I noticed that the drive containing the inboxes on my primary site was filled.  Upon further investigation it appears that the BGB.box folder was filled with .__M files and the inbox\bgb.box\bad folder was filled with .BOS files (BGB online
status files).  The bgbmgr.log file has several entries indicating the following:
Inbox changes detected. Sleep for 1 second and process inbox files    SMS_NOTIFICATION_MANAGER    3/4/2014 2:30:55 PM    3240 (0x0CA8)
Begin to get file list to process    SMS_NOTIFICATION_MANAGER    3/4/2014 2:30:56 PM    3240 (0x0CA8)
Begin to handle file 1dyj1xcg.BOS    SMS_NOTIFICATION_MANAGER    3/4/2014 2:30:56 PM    3240 (0x0CA8)
Begin to process file D:\Program Files\Microsoft Configuration Manager\inboxes\bgb.box\1dyj1xcg.BOS    SMS_NOTIFICATION_MANAGER    3/4/2014 2:30:56 PM    3240 (0x0CA8)
ERROR: Failed to parse online status file    SMS_NOTIFICATION_MANAGER    3/4/2014 2:30:56 PM    3240 (0x0CA8)
ERROR: Failed to execute task class OnlineStatusParser    SMS_NOTIFICATION_MANAGER    3/4/2014 2:30:56 PM    3240 (0x0CA8)
ERROR: Failed to parse file    SMS_NOTIFICATION_MANAGER    3/4/2014 2:30:56 PM    3240 (0x0CA8)
ERROR: Failed to execute task class OnlineStatusProcessTask    SMS_NOTIFICATION_MANAGER    3/4/2014 2:30:56 PM    3240 (0x0CA8)
WARNING: Failed to process file 1dyj1xcg.BOS, move it to bad inbox    SMS_NOTIFICATION_MANAGER    3/4/2014 2:30:56 PM    3240 (0x0CA8)
Begin to move file from D:\Program Files\Microsoft Configuration Manager\inboxes\bgb.box\1dyj1xcg.BOS to D:\Program Files\Microsoft Configuration Manager\inboxes\bgb.box\bad\1dyj1xcg.BOS    SMS_NOTIFICATION_MANAGER    3/4/2014
2:30:56 PM    3240 (0x0CA8)
BgbManager is waiting for file and registry change notification or timeout after 60 seconds    SMS_NOTIFICATION_MANAGER    3/4/2014 2:30:56 PM    3240 (0x0CA8)
SQL>>>set quoted_identifier on;set ansi_warnings on;set ansi_padding on;set ansi_nulls on;set concat_null_yields_null on;set arithabort on;set numeric_roundabort off;set DATEFORMAT mdy;    SMS_NOTIFICATION_MANAGER    3/4/2014
2:31:44 PM    3248 (0x0CB0)
SQL>>>>> Done.    SMS_NOTIFICATION_MANAGER    3/4/2014 2:31:44 PM    3248 (0x0CB0)
I cleared out (moved the BOS files) the outbox on the MP server and inbox on the PS which slowed the assault but as soon as a new BOS file is created, the errors appear again.  Looking into the BOS files, it looks like the entries are consistent so
I am not sure how the parser is failing.
Just to cover my bases on supplying info I ran the following query against the primary site server DB:
select B.ServerName, A.OnlineClients as 'Online Clients' from Bgb_Server B left
join dbo.v_BgbServerCurrent A on A.ServerID=B.ServerID order by 2
The response was the FQDN of the MP server and the online clients count was 0.
It seems this all started when I had Premier Support track down a corrupted Status message SQL file that was preventing status messages from processing on the affected primary site.  The other primaries are as happy as can be.

For the benefit of those out on the web below is the answer in my case.  I forgot about this thread until some email reminded me it existed and I thought posting the solution would be helpful.
I have resolved this issue myself. 
When setting up a new HTTPS MP I noticed the same behavior with the BOS files failing to process correctly.  I am not sure if the logs read something different on the HTTP MP to which this ticket is open for but the entry
that stuck out at me indicated that the sending server (the site system with the MP role) is what “moved” the BOS file from filename.__M to filename.BOS in the inbox\bgb.box folder on the primary site server.  Looking at the special perms of the inbox\bgb.box
folder and comparing it to another primary site server, it turns out that the permissions to the bgb.box folder were incorrect for the SMS_SiteSystemToSiteServerConnection_MP_sitecode group.  It displayed the basic perms to read and write, but lacked
perms to append data or modify attributes.
My guess is that work on a previous ticket resulted in the perm getting changed, causing the issue.  Because the perms in question were only visible in the advanced security settings screen, it was easily overlooked.

Similar Messages

  • Parsing Issue in Filter For Date Format

    Hi Folks,
    I am having Parsing Issue on "Key Date" Object in Universe. See the Error and Code below for your review
    Error: Parse Failed: Exception: DBD, The value entered is not valid. It must adhere to one of the following formats.
    YYYYMMDD
    DD.MM.YYYYState:N/A
    Code:
    <OPERATOR VALUE="AND"><OPTIONAL><FILTER KEY="0I_DAYIN"><CONDITION OPERATORCONDITION="Between"><CONSTANT TECH_NAME="@Prompt('Day Interval From','A','Calendar Day\LovDay IntervalBase',mono,primary_key)"/><CONSTANT TECH_NAME="@Prompt('Day Interval To','A','Calendar Day\LovDay IntervalBase',mono,primary_key)"/></CONDITION></FILTER></OPTIONAL><FILTER KEY="0P_KEYDA"><CONDITION OPERATORCONDITION="Equal"><CONSTANT TECH_NAME="@Prompt('Key Date','D',,mono,free)"/></CONDITION></FILTER></OPERATOR>
    This universe is created by someone else and client need to modify it with a calendar but i did not modify it yet however its already giving me the hard time. Kindly advise, any kind of help will be appreciated
    Thanks

    Hi,
    With the information provided I cannot for sure get to the error but here is what I would check.
    Firstly, I was wondering if the 5th parameter in the @Prompt can be Primary_Key. I thought it would be either free or constrained.
    Secondly, please the LOV values for the @ prompt are being populated from 'Calendar Day\LovDay IntervalBase'. So I would check the date format being used there.
    Third, the To and From dates are alphaneumeric and not dates, so I am not sure how the comparision would happen.
    Hope this helps.
    Regards,
    Madhur

  • Bpel parsing issue with special characters...

    Hi All,
    We are integrating Oracle Sales Order information with OTM as Order Releases.
    For this we are sending the Sales Order in the form of clob from the procedure to the Bpel process.
    1. A PL/SQL procedure would send the Sales order XML as a CLOB.
    2.In the BPEL process , we are performing ora:parseXML() function on the clob obtained.
    3.A patch was installed on the BPEL SOA server:
    10.1.3.3.1 MLR#8, Patch#6906880 which was supposed to handle all the parsing activities at run time.
    4. But when ever any special character viz..; #,UNIT¿S etc the BPEL process is failing with a fault string due to Parsing error.
    5. Could you please provide us a workaround for solving this issue ASAP with all the special characters.
    I have provided a sample xml tag due to which the parsing is failing in the bpel process. here it is failing because it is not able to parse : UNIT¿S successfully...
    <SHIPPING_INSTRUCTIONS>
    **San Dieg UNIT¿S contact name is Jenny Haden 858-609-1170** 12/12/08
    **Updated Contact is ASHTON REYES 72-696-1525, hours are 830-5 only, N/S. Millyz DELIVERY
    CONTACT: ELLEN HILGER @ 248-932-9000: LINE 4.1 -TRIAL CONVERSION FROM ORDER # 25766204
    </SHIPPING_INSTRUCTIONS>
    is there some other bpel patch or some other workaround using which whatever input value comes in , the bpel is able
    to successully parse that through..
    we are stuck with this special character parsing issue as of now and go live is very near ...your help/inputs would be highly appreciated
    thanks

    Guys,
    I am new to OTM and SOA/BPEL architecture.
    Could you please suggest me in detail as how to integrate OTM with outside world using BPEL.
    Thanks,
    Kamleshwar

  • XML Document parsing issue

    Hello I am doing some SOAP XML stuff and I am having an issue that hopefully I can get some help with.
    Is XML like this valid to do in a SOAP message?
    <prompt>1 &_lt_; 0? <prompt>It's suppose to represent "1 < 0?"
    * the forum formatter seems to eat up my encoded text and transofrms it into acutal "<" so I am placing underscores "_" everywhere to keep the text. so above is actually without underscores
    From what I've read I think it is. I have text like this transported as part of the overall SOAP message to my client from the server.
    In my code I do:
    // Create an instance of the DocumentBuilderFactory
    DocumentBuilderFactory documentFactory = DocumentBuilderFactory.newInstance();
    // Get the DocumentBuilder from the factory
    DocumentBuilder builder = documentFactory.newDocumentBuilder();
    Document doc = builder.parse(inputStream);
    ...inputStream is an InputStream (specifically ByteArrayInputStream) containing the XML.
    The issue I am having is that wherever I have an '&' (such as "&_lt_;" or "&_gt_;" or "&" etc...) the parsing seems to get cut off and the rest of the string doesn't seem to get parsed. So the above string "1 &_lt_; 0?" ends up being "1 ".
    Also is there an easy way to get back or rebuild the XML into a string from a Document object? I would really like to do that right after I do the parse method and see if the XML data that the Document object has is the same as what's in the inputStream (which is "1 &_lt_; 0?").
    Any input you can provide is much appreciated. Thanks,
    Latem

    Hello I am doing some SOAP XML stuff and I am having an issue that hopefully I can get some help with.
    Is XML like this valid to do in a SOAP message?
    <prompt>1 &_lt_; 0? <prompt>It's suppose to represent "1 < 0?"
    * the forum formatter seems to eat up my encoded text and transofrms it into acutal "<" so I am placing underscores "_" everywhere to keep the text. so above is actually without underscores
    From what I've read I think it is. I have text like this transported as part of the overall SOAP message to my client from the server.
    In my code I do:
    // Create an instance of the DocumentBuilderFactory
    DocumentBuilderFactory documentFactory = DocumentBuilderFactory.newInstance();
    // Get the DocumentBuilder from the factory
    DocumentBuilder builder = documentFactory.newDocumentBuilder();
    Document doc = builder.parse(inputStream);
    ...inputStream is an InputStream (specifically ByteArrayInputStream) containing the XML.
    The issue I am having is that wherever I have an '&' (such as "&_lt_;" or "&_gt_;" or "&" etc...) the parsing seems to get cut off and the rest of the string doesn't seem to get parsed. So the above string "1 &_lt_; 0?" ends up being "1 ".
    Also is there an easy way to get back or rebuild the XML into a string from a Document object? I would really like to do that right after I do the parse method and see if the XML data that the Document object has is the same as what's in the inputStream (which is "1 &_lt_; 0?").
    Any input you can provide is much appreciated. Thanks,
    Latem

  • RFC to XML-RFC Parsing issue in RFC Adapter as Sender

    Hi all,
    I tried to use RFC adapter as a sender. The scenario I am trying to achieve is R3 -> RFC Adapter Sender --> BPM --> RFC Adapter Receiver --> SAP Auto-ID system.
    The reason to use two RFC adapter and BPM is to log the request message if the RFC call fails. Everything works as expected, except the RFC Adapter Sender.
    The RFC I am calling has an input table. The input data I use works fine if I call it via SE37 or remotely from another SAP system. However, if I call it via RFC adapter, when XI parses the data into RFC-XML format, the input data is all messed up.
    DATA: BEGIN OF ID_STR,
            ID_VERSION(8)       TYPE C,
            ID(96)              TYPE C,
            ELEMENT_NAME(50)    TYPE C,
            ELEMENT_VALUE(128)  TYPE C,
          END OF ID_STR.
    DATA: it_id LIKE TABLE OF ID_STR,
          ls_id LIKE ID_STR.
    ls_id-ID_VERSION = 'EPC_1.30'.
    ls_id-ID = '30340242206DC3C00000000A'.
    ls_id-element_name = 'BATCH_ID'.
    ls_id-element_value = 'BATCH001'.
    APPEND ls_id TO it_id.
    CALL FUNCTION '/AIN/UI_MOBILE_MSG_SEND'
      IN BACKGROUND TASK
      DESTINATION  'RFC_UPDATEAII'
      EXPORTING
        IV_BUSINESS_PROCESS       = '09'
        IV_COMMAND                = 'DO'
        IV_ACTION_TYPE            = 'APL2'
        IV_PRT_ID                 = '31140242200000000F000000'
        IV_DEVGRP_EXTID           = 'MOBILE'
      TABLES
        IT_ID                     = it_id
      commit work.
    And the parsed RFC-XML message is:
    <?xml version="1.0" encoding="UTF-8" ?>
    <rfc:_-AIN_-UI_MOBILE_MSG_SEND
    xmlns:rfc="urn:sap-com:document:sap:rfc:functions">
    <IV_ACTION_TYPE>APL2</IV_ACTION_TYPE>
    <IV_BTD_EXTID />
    <IV_BTD_TYPE />
    <IV_BUSINESS_PROCESS>09</IV_BUSINESS_PROCESS>
    <IV_COMMAND>DO</IV_COMMAND>
    <IV_DEVGRP_EXTID>MOBILE</IV_DEVGRP_EXTID>
    <IV_LOC_EXTID />
    <IV_LOC_TYPE />
    <IV_PRT_ID>31140242200000000F000000</IV_PRT_ID>
    <IV_PRT_ID_VERSION />
    <IV_REASON_CODE />
    <IV_UNAME/>
    <ET_RETURN />
    <IT_ID>
    <item>
    <ID_VERSION>EPC_1.30</ID_VERSION>
    <ID>206DC3C00000000A BATCH_ID</ID>
    <ELEMENT_NAME />
    <ELEMENT_VALUE />
    </item>
    </IT_ID>
    </rfc:_-AIN_-UI_MOBILE_MSG_SEND>
    You can see the data in the table is all wrong, it should be:
    <IT_ID>
    <item>
    <ID_VERSION>EPC_1.30</ID_VERSION>
    <ID>30340242206DC3C00000000A</ID>
    <ELEMENT_NAME>BATCH_ID</ELEMENT_NAME>
    <ELEMENT_VALUE>BATCH001</ELEMENT_VALUE>
    </item>
    </IT_ID>
    The calling system is a 4.6C non-unicode system, and the destination system is a unicode system (this does not matter since the first part of the integration is between R3 and XI). There is no config found on R3 side to specify non-unicode because it is a rather old system. In XI RFC Adapter config, I checked non-unicode checkbox (I also tested it with this unchecked, but still the same issue).
    Have any of you seen this problem and how you resolve it?
    Thanks a lot for your help!
    Regards,
    Hart

    Hi Hart
    long time no seen - hope you remember me
    >The reason to use two RFC adapter and BPM is to log the request message if the RFC call fails
    there is an easy way (guess max 3-4 hours) to solve all of your issues
    and get rid of a BPM
    use IDOC - XI - ABAP Proxy
    then you will have IDOC and ABAP Proxy that always log the message on both ends (and you can restart ABAP proxies easily in AII - and every AII supports ABAP proxies) + you get rid of a BPM as it's not necessary as far as I understand (as it's asyn communication right?)
    maybe you can go this way and IDOCs always work...
    good luck,
    Regards,
    Michal Krawczyk
    http://mypigenie.com XI/PI FAQ

  • Xml parsing issue with the existsnode function

    Hi Friends,
    I have a question as like below
    We have the contacts and alternate contacts request as like below.
    <TXLife>
    <UserAuthRequest>
    <UserLoginName>hqtest24</UserLoginName>
    <UserDate>2012-07-11</UserDate>
    <UserTime>12:42:55</UserTime>
    </UserAuthRequest>
    <TXLifeRequest>
    <TransRefGUID>0c95642d-663a-455f-bd92-aca678538986</TransRefGUID>
    <TransType tc="1204">OLI_TRANS_TRNPARTY</TransType>
    <TransExeDate>2012-07-11</TransExeDate>
    <TransExeTime>12:42:55</TransExeTime>
    <InquiryLevel tc="3">OLI_INQUIRY_OBJRELOBJ</InquiryLevel>
    <InquiryView>
    <InquiryViewCode>INTERMEDIARYUPDATE-CHBM-1204A</InquiryViewCode>
    </InquiryView>
    <OLifE>
    <SourceInfo>
    <SourceInfoName>CHBM Admin Tool</SourceInfoName>
    </SourceInfo>
    <Party id="Intermediary1">
    <PartyTypeCode tc="2">OLI_PT_ORG</PartyTypeCode>
    <PartySysKey SystemCode="CHBM">111259</PartySysKey>
    <FullName>Example Law Firm test</FullName>
    <Organization>
    <DBA>Example Law Firm test</DBA>
    </Organization>
    <Address>
    <AddressTypeCode tc="2">OLI_ADTYPE_BUS</AddressTypeCode>
    <Line1>20 Yellow Brick Rd</Line1>
    <Line2>Suite 23</Line2>
    <Line3>line 3</Line3>
    <City>wonderland34</City>
    <AddressState>NY</AddressState>
    <Zip>229292</Zip>
    <AddressCountry>US</AddressCountry>
    </Address>
    <Phone>
    <PhoneTypeCode tc="2">OLI_PHONETYPE_BUS</PhoneTypeCode>
    <DialNumber></DialNumber>
    </Phone>
    <Phone>
    <PhoneTypeCode tc="19">OLI_PHONETYPE_FAX</PhoneTypeCode>
    <DialNumber></DialNumber>
    </Phone>
    <Attachment id="Attachment1">
    <DateCreated>2012-07-11</DateCreated>
    <UserCode>hqtest24</UserCode>
    <AttachmentBasicType tc="1">Text</AttachmentBasicType>
    <AttachmentSource>ATTORNEY</AttachmentSource>
    <Description>INTERMEDIARY TYPE UPDATED</Description>
    <AttachmentData>Attorney</AttachmentData>
    <AttachmentType tc="1009800001">Transaction Log</AttachmentType>
    <AttachmentLocation tc="1">Inline</AttachmentLocation>
    <OLifEExtension VendorCode="0098" ExtensionCode="Attachment">
    <AttachmentExtension>
    <CreationTime>12:42:55</CreationTime>
    <Sequence>1</Sequence>
    </AttachmentExtension>
    </OLifEExtension>
    </Attachment>
    <Attachment id="Attachment2">
    <DateCreated>2012-07-11</DateCreated>
    <UserCode>hqtest24</UserCode>
    <AttachmentBasicType tc="1">Text</AttachmentBasicType>
    <AttachmentSource>James</AttachmentSource>
    <Description>ALTERNATE CONTACT FIRST NAME UPDATED</Description>
    <AttachmentType tc="1009800001">Transaction Log</AttachmentType>
    <AttachmentLocation tc="1">Inline</AttachmentLocation>
    <OLifEExtension VendorCode="0098" ExtensionCode="Attachment">
    <AttachmentExtension>
    <CreationTime>12:42:55</CreationTime>
    <Sequence>2</Sequence>
    </AttachmentExtension>
    </OLifEExtension>
    </Attachment>
    <Attachment id="Attachment3">
    <DateCreated>2012-07-11</DateCreated>
    <UserCode>hqtest24</UserCode>
    <AttachmentBasicType tc="1">Text</AttachmentBasicType>
    <AttachmentSource>Mathew</AttachmentSource>
    <Description>ALTERNATE CONTACT LAST NAME UPDATED</Description>
    <AttachmentType tc="1009800001">Transaction Log</AttachmentType>
    <AttachmentLocation tc="1">Inline</AttachmentLocation>
    <OLifEExtension VendorCode="0098" ExtensionCode="Attachment">
    <AttachmentExtension>
    <CreationTime>12:42:55</CreationTime>
    <Sequence>3</Sequence>
    </AttachmentExtension>
    </OLifEExtension>
    </Attachment>
    <EMailAddress>
    <EMailType tc="1">Business</EMailType>
    <AddrLine></AddrLine>
    </EMailAddress>
    <URL>
    <URLAddr>www.example.com</URLAddr>
    <URLType tc="1">Home Page</URLType>
    </URL>
    </Party>
    <Activity id="Activity1" HoldingID="Intermediary1">
    <UserCode>hqtest24</UserCode>
    <LastUpdate>2012-07-11</LastUpdate>
    <ActivityCode>CHBM10004</ActivityCode>
    <OLifEExtension VendorCode="0098" ExtensionCode="Activity">
    <ActivityExtension>
    <SubActivityCode>CHBM20002</SubActivityCode>
    <LastUpdateTime>12:42:55</LastUpdateTime>
    </ActivityExtension>
    </OLifEExtension>
    </Activity>
    <Party id="Contact1">
    <PartyTypeCode tc="1">OLI_PT_PERSON</PartyTypeCode>
    <PartySysKey>555223</PartySysKey>
    <Person>
    <FirstName>Jack</FirstName>
    <LastName>Scarecrow23</LastName>
    </Person>
    <Phone>
    <PhoneTypeCode tc="2">OLI_PHONETYPE_BUS</PhoneTypeCode>
    <DialNumber>2223993993</DialNumber>
    </Phone>
    <Phone>
    <PhoneTypeCode tc="19">OLI_PHONETYPE_FAX</PhoneTypeCode>
    <DialNumber>2223392020</DialNumber>
    </Phone>
    <EMailAddress>
    <EMailType tc="1">Business</EMailType>
    <AddrLine>[email protected]</AddrLine>
    </EMailAddress>
    </Party>
    <Relation id="Relation1" OriginatingObjectID="Intermediary1" RelatedObjectID="Contact1">
    <RelationRoleCode tc="150">Authorized Person</RelationRoleCode>
    </Relation>
    <Relation id="Relation1" OriginatingObjectID="Intermediary1">
    <RelationRoleCode tc="104">Intermediary</RelationRoleCode>
    <RelationDescription tc="42">Attorney</RelationDescription>
    </Relation>
    <Party id="Contact2">
    <PartyTypeCode tc="1">OLI_PT_PERSON</PartyTypeCode>
    <PartySysKey>556915</PartySysKey>
    <Person>
    <FirstName/>
    <LastName/>
    </Person>
    <Phone>
    <PhoneTypeCode tc="2">OLI_PHONETYPE_BUS</PhoneTypeCode>
    <DialNumber>2343434</DialNumber>
    </Phone>
    <Phone>
    <PhoneTypeCode tc="19">OLI_PHONETYPE_FAX</PhoneTypeCode>
    <DialNumber>45345345</DialNumber>
    </Phone>
    <EMailAddress>
    <EMailType tc="1">Business</EMailType>
    <AddrLine>[email protected]</AddrLine>
    </EMailAddress>
    </Party>
    <Relation id="Relation4" OriginatingObjectID="Intermediary1" RelatedObjectID="Contact2">
    <OriginatingObjectType tc="6">Party</OriginatingObjectType>
    <RelatedObjectType tc="6">Party</RelatedObjectType>
    <RelationRoleCode tc="150">Authorized Person</RelationRoleCode>
    <InterestPercent>-1.0</InterestPercent>
    <Sequence>2</Sequence>
    </Relation>
    </OLifE>
    </TXLifeRequest>
    </TXLife>
    From the above request we have to parse the alternate contact details.
    In the procedure we are using as like below
    FOR b IN (
    SELECT t.vAltCntcity vAltCntcity,
    t.Partysyskey Partysyskey,
    t.vAltCntZip vAltCntZip,
    t.vAltCntGovtID vAltCntGovtID,
    t.vAltCntTelno vAltCntTelno,
    t.vAltCntemailaddr vAltCntemailaddr,
    t.vAltCntstats vAltCntstats,
    t.vAltCntAdd1 vAltCntAdd1,
    t.vAltCntAdd2 vAltCntAdd2,
    t.vAltCntAdd3 vAltCntAdd3,
    t.AltCntstate AltCntstate,
    t.AltCntcntry AltCntcntry,
    t.vAltCntBRTH_DT vAltCntBRTH_DT,
    t.vAltCntGender vAltCntGender,
    t.vAltCntFaxno vAltCntFaxno,
    t.vAltCnturladdr vAltCnturladdr,
    t.AltCntorgFST_NM AltCntorgFST_NM,
    t.AltCntorgLST_NM AltCntorgLST_NM,
    t.AltCntorgMID_NM AltCntorgMID_NM,
    t.AltCntorgPFX_NM AltCntorgPFX_NM,
    t.AltCntorgSUFX_NM AltCntorgSUFX_NM,
    t.AltCntpartytypecode AltCntpartytypecode,
    t.vAltCntdatarep vAltCntdatarep,
    t1.vAltCntInterestPercent vAltCntInterestPercent,
    t1.ROID ROID
    FROM (
    SELECT xData doc FROM dual ) temp_table,
    XMLTable ( '/TXLife/TXLifeRequest/OLifE/Relation[RelationRoleCode/@tc=150][Sequence=2]' passing doc
    COLUMNS OOID varchar2(50) path '@OriginatingObjectID'
    , ROID varchar2(50) path '@RelatedObjectID'
    , vAltCntInterestpercent varchar2(100) path 'InterestPercent'
    )t1,
    XMLTable('/Party[@id=$roid]' passing vAltcnt, t1.roid as "roid"
    COLUMNS
    vAltCntcity VARCHAR2(20) path 'City',
    Partysyskey VARCHAR2(100) path 'PartySysKey',
    vAltCntZip VARCHAR2(20) path 'Address/Zip',
    vAltCntGovtID VARCHAR2(20) path 'GovtID',
    vAltCntTelno VARCHAR2(20) path 'Phone[PhoneTypeCode/@tc=2]/DialNumber',
    vAltCntemailaddr VARCHAR2(200) path 'EMailAddress/AddrLine',
    vAltCntstats varchar2(20) path 'Client/ClientStatus/@tc',
    vAltCntAdd1 varchar2(1000) path 'Address/Line1',
    vAltCntAdd2 varchar2(1000) path 'Address/Line2',
    vAltCntAdd3 varchar2(1000) path 'Address/Line3',
    AltCntstate varchar2(100) path 'Address/AddressState',
    AltCntcntry varchar2(100) path 'Address/AddressCountry',
    vAltCntBRTH_DT date path 'Person/BirthDate',
    vAltCntGender char(1) path 'Person/Gender/@tc',
    vAltCntFaxno varchar2(100) path 'Phone[PhoneTypeCode/@tc=19]/DialNumber',
    vAltCnturladdr varchar2(100) path 'URL/URLAddr',
    AltCntorgFST_NM varchar2(100) path 'Person/FirstName',
    AltCntorgLST_NM varchar2(100) path 'Person/LastName',
    AltCntorgMID_NM varchar2(100) path 'Person/MiddleName',
    AltCntorgPFX_NM varchar2(100) path 'Person/Prefix',
    AltCntorgSUFX_NM varchar2(100) path 'Person/Suffix',
    AltCntpartytypecode varchar2(10) path 'PartyTypeCode/@tc',
    vAltCntdatarep varchar2(100) path '@DataRep'
    ) t
    LOOP
    BEGIN
    SELECT extractvalue(value(t),'/OLifE/Party[@id=/OLifE/Relation[RelationRoleCode/@tc=150][Sequence=2]/b.ROID][PartyTypeCode/@tc=1]/Person/FirstName')
    INTO vAltCntFirstnamechk
    FROM TABLE (XMLSEQUENCE (EXTRACT (xData,'/TXLife/TXLifeRequest/OLifE'))) t
    WHERE existsnode(value(t),'/OLifE/Party[@id=/OLifE/Relation[RelationRoleCode/@tc=150][Sequence=2]/b.ROID][PartyTypeCode/@tc=1]/Person/FirstName') =1;
    EXCEPTION
    WHEN NO_DATA_FOUND THEN
    vAltCntFirstnamechkflag:='Y';
    END;
    BEGIN
    SELECT extractvalue(value(t),'/OLifE/Party[@id=/OLifE/Relation[RelationRoleCode/@tc=150][Sequence=2]/b.ROID][PartyTypeCode/@tc=1]/Person/LastName')
    INTO vAltCntLastNamechk
    FROM TABLE (XMLSEQUENCE (EXTRACT (xData,'/TXLife/TXLifeRequest/OLifE'))) t
    WHERE existsnode(value(t),'/OLifE/Party[@id=/OLifE/Relation[RelationRoleCode/@tc=150][Sequence=2]/b.ROID][PartyTypeCode/@tc=1]/Person/LastName') =1;
    EXCEPTION
    WHEN NO_DATA_FOUND THEN
    vAltCntLastNamechkflag:='Y';
    END;
    END LOOP;
    Here while parsing the data for contact2(with the request provided) by using the above procedure its going to exception.
    If the value is not there between the firstname then it should not go to the exception.
    If the firstname tag is not there it should go to the exception.
    But in the above procedure for the altcntfirstname and altcntlastname selectstatements its going to the exception part when there is no value for firstname(<FirstName></FirstName>).
    Is there any way to resolve this issue?
    Regards,
    Jyothirmai

    Hi Odie,
    In the request more than one alternate contact used to come(that means contact1 is primary contact,contact2 is alternate contact1,contact3 is alternate contact2 etc).
    We are retrieving the RelatedObjectID and named as ROID in the for loop.
    That means in the for loop we are getting the RelatedObjectID,if that RelatedObjectID is equal to party id then that firstname we are checking by using the below select statement.
    suppose when we used as like below in the loop the same RelatedObjectID(contact2) is repeating every time.
    FOR b IN (
    SELECT t.vAltCntcity vAltCntcity,
    t.Partysyskey Partysyskey,
    t.vAltCntZip vAltCntZip,
    t.vAltCntGovtID vAltCntGovtID,
    t.vAltCntTelno vAltCntTelno,
    t.vAltCntemailaddr vAltCntemailaddr,
    t.vAltCntstats vAltCntstats,
    t.vAltCntAdd1 vAltCntAdd1,
    t.vAltCntAdd2 vAltCntAdd2,
    t.vAltCntAdd3 vAltCntAdd3,
    t.AltCntstate AltCntstate,
    t.AltCntcntry AltCntcntry,
    t.vAltCntBRTH_DT vAltCntBRTH_DT,
    t.vAltCntGender vAltCntGender,
    t.vAltCntFaxno vAltCntFaxno,
    t.vAltCnturladdr vAltCnturladdr,
    t.AltCntorgFST_NM AltCntorgFST_NM,
    t.AltCntorgLST_NM AltCntorgLST_NM,
    t.AltCntorgMID_NM AltCntorgMID_NM,
    t.AltCntorgPFX_NM AltCntorgPFX_NM,
    t.AltCntorgSUFX_NM AltCntorgSUFX_NM,
    t.AltCntpartytypecode AltCntpartytypecode,
    t.vAltCntdatarep vAltCntdatarep,
    t1.vAltCntInterestPercent vAltCntInterestPercent,
    t1.ROID ROID
    FROM (
    SELECT xData doc FROM dual ) temp_table,
    XMLTable ( '/TXLife/TXLifeRequest/OLifE/Relation[RelationRoleCode/@tc=150][Sequence=2]' passing doc
    COLUMNS OOID varchar2(50) path '@OriginatingObjectID'
    , ROID varchar2(50) path '@RelatedObjectID'
    , vAltCntInterestpercent varchar2(100) path 'InterestPercent'
    )t1,
    XMLTable('/Party[@id=$roid]' passing vAltcnt, t1.roid as "roid"
    COLUMNS
    vAltCntcity VARCHAR2(20) path 'City',
    Partysyskey VARCHAR2(100) path 'PartySysKey',
    vAltCntZip VARCHAR2(20) path 'Address/Zip',
    vAltCntGovtID VARCHAR2(20) path 'GovtID',
    vAltCntTelno VARCHAR2(20) path 'Phone[PhoneTypeCode/@tc=2]/DialNumber',
    vAltCntemailaddr VARCHAR2(200) path 'EMailAddress/AddrLine',
    vAltCntstats varchar2(20) path 'Client/ClientStatus/@tc',
    vAltCntAdd1 varchar2(1000) path 'Address/Line1',
    vAltCntAdd2 varchar2(1000) path 'Address/Line2',
    vAltCntAdd3 varchar2(1000) path 'Address/Line3',
    AltCntstate varchar2(100) path 'Address/AddressState',
    AltCntcntry varchar2(100) path 'Address/AddressCountry',
    vAltCntBRTH_DT date path 'Person/BirthDate',
    vAltCntGender char(1) path 'Person/Gender/@tc',
    vAltCntFaxno varchar2(100) path 'Phone[PhoneTypeCode/@tc=19]/DialNumber',
    vAltCnturladdr varchar2(100) path 'URL/URLAddr',
    AltCntorgFST_NM varchar2(100) path 'Person/FirstName',
    AltCntorgLST_NM varchar2(100) path 'Person/LastName',
    AltCntorgMID_NM varchar2(100) path 'Person/MiddleName',
    AltCntorgPFX_NM varchar2(100) path 'Person/Prefix',
    AltCntorgSUFX_NM varchar2(100) path 'Person/Suffix',
    AltCntpartytypecode varchar2(10) path 'PartyTypeCode/@tc',
    vAltCntdatarep varchar2(100) path '@DataRep'
    ) t
    LOOP
    BEGIN
    SELECT extractvalue(value(t),'/OLifE/Party[@id=/OLifE/Relation[RelationRoleCode/@tc=150][Sequence=2]/@RelatedObjectID][PartyTypeCode/@tc=1]/Person/FirstName')
    INTO vAltCntFirstnamechk
    FROM TABLE (XMLSEQUENCE (EXTRACT (xData,'/TXLife/TXLifeRequest/OLifE'))) t
    WHERE existsnode(value(t),'/OLifE/Party[@id=/OLifE/Relation[RelationRoleCode/@tc=150][Sequence=2]/@RelatedObjectID][PartyTypeCode/@tc=1]/Person/FirstName') =1;
    EXCEPTION
    WHEN NO_DATA_FOUND THEN
    vAltCntFirstnamechkflag:='Y';
    END;
    end loop;
    For this above code its not going to the exception.we are using this select statement to check whether that node existed or not.
    If that node exists and value is not there, that time we are updating the table with the null value by using the vAltCntFirstnamechkflag value as like below in our procedure.
    IF b.AltCntorgFST_NM IS NOT NULL THEN
    cAltCntpsnUpdateflag:='Y';
    vAltCntpsnupdatequery:=vAltCntpsnupdatequery||' FST_NM ='''||b.AltCntorgFST_NM||''''||',';
    ELSIF vAltCntFirstnamechkflag='N' AND vAltCntFirstnamechk IS NULL THEN
    cAltCntpsnUpdateflag:='Y';
    vAltCntpsnupdatequery:=vAltCntpsnupdatequery||' FST_NM ='''||NULL||''''||',';
    END IF;
    Please find the below procedure what we are using could you please let me know is there any possibility to resolve this issue(if the tag like <firstname></firstname> that
    time also it should not go to the exception).
    CREATE OR REPLACE PROCEDURE CHBM_QA1.PR_CUSTOMERUPDATE(PIN_XML_DATA IN CLOB,po_vResponse OUT clob )
    IS
    xData XMLTYPE:=NULL;
    vActivityCode VARCHAR2(100):=NULL;
    vSubActivityCode VARCHAR2(100):=NULL;
    ncode NUMBER(2):=NULL;
    nErrcode NUMBER(10):=0;
    vInfodesc VARCHAR2(1000):=NULL;
    vStatusinfo VARCHAR2(1000):=NULL;
    vStatus VARCHAR2(100):=NULL;
    vOrgid VARCHAR2(100):=NULL;
    vcity VARCHAR2(100):=NULL;
    vAltCntcity VARCHAR2(20):=NULL;
    vorgcity VARCHAR2(100):=NULL;
    vAddressState VARCHAR2(100):=NULL;
    vZip VARCHAR2(100):=NULL;
    vAltCntZip VARCHAR2(100):=NULL;
    vorgZip VARCHAR2(100):=NULL;
    vGovtID VARCHAR2(100):=NULL;
    vAltCntGovtID VARCHAR2(100):=NULL;
    vorgGovtID VARCHAR2(100):=NULL;
    vFullname VARCHAR2(200):=NULL;
    norgid NUMBER:=0;
    vTelno VARCHAR2(100):=Null;
    vAltCntTelno VARCHAR2(100):=Null;
    vOrgTelno VARCHAR2(100):=null;
    nOrgcnt NUMBER:=0;
    vemailaddr VARCHAR2(200):=null;
    vAltCntemailaddr VARCHAR2(200):=null;
    vorgemailaddr VARCHAR2(200):=null;
    vFISC_YEAR_END_DT VARCHAR2(100);
    vFiscalYearEndMoDaychkflag CHAR(1):='N';
    vFiscalYearEndMoDaychk VARCHAR2(100):=NULL;
    vGovtIDchkflag CHAR(1):='N';
    vGovtIDchk VARCHAR2(100):=NULL;
    vEMailAddresschkflag CHAR(1):='N';
    vEMailAddresschk VARCHAR2(1000):=NULL;
    vDialNumberchkflag CHAR(1):='N';
    vAltCntDialNumberchkflag CHAR(1):='N';
    vDialNumberchk VARCHAR2(100):=NULL;
    vAltCntDialNumberchk VARCHAR2(100):=NULL;
    vFaxnochkflag CHAR(1):='N';
    vAltCntFaxnochkflag CHAR(1):='N';
    vFaxnochk VARCHAR2(100):=NULL;
    vAltCntFaxnochk VARCHAR2(100):=NULL;
    vEMailAddressPchkflag CHAR(1):=NULL;
    vAltCntEMailAddressPchkflag CHAR(1):=NULL;
    vEMailAddressPchk VARCHAR2(200):=NULL;
    vAltCntEMailAddressPchk VARCHAR2(200):=NULL;
    vLastNamechkflag CHAR(1):='N';
    vAltCntLastNamechkflag CHAR(1):='N';
    vFirstNamechkflag CHAR(1):='N';
    vAltCntFirstNamechkflag CHAR(1):='N';
    vTaxidPchkflag CHAR(1):='N';
    vAltCntTaxidPchkflag CHAR(1):='N';
    vBusinessDescchkflag CHAR(1):='N';
    vBusinessDescchk VARCHAR2(2000):=NUll;
    vTaxidPchk VARCHAR2(200):=NULL;
    vAltCntTaxidPchk VARCHAR2(200):=NULL;
    vLastNamechk VARCHAR2(2000):=NULL;
    vAltCntLastNamechk VARCHAR2(2000):=NULL;
    vFirstNamechk VARCHAR2(2000):=NULL;
    vAltCntFirstnamechk VARCHAR2(2000):=NULL;
    vattdate VARCHAR2(50):=NULL;
    dattdate DATE;
    vAdd3Pchkflag CHAR(1):='N';
    vAltCntAdd3Pchkflag CHAR(1):='N';
    vOrgAdd3chkflag CHAR(1):='N';
    vOrgAdd2chkflag CHAR(1):='N';
    vAdd2Pchkflag CHAR(1):='N';
    vAltCntAdd2Pchkflag CHAR(1):='N';
    vOrgAdd3chk VARCHAR2(2000):=NULL;
    vOrgAdd2chk VARCHAR2(2000):=NULL;
    vAdd2Pchk VARCHAR2(2000):=NULL;
    vAltCntAdd2Pchk VARCHAR2(2000):=NULL;
    vAdd3Pchk VARCHAR2(2000):=NULL;
    vAltCntAdd3Pchk VARCHAR2(2000):=NULL;
    nADDR_ID NUMBER:=0;
    cntry VARCHAR2(100):=NULL;
    AltCntcntry VARCHAR2(100):=NULL;
    orgcntry VARCHAR2(100):=NULL;
    vAdd1 VARCHAR2(1000):=NULL;
    vAdd2 VARCHAR2(1000):=NULL;
    vAdd3 VARCHAR2(1000):=NULL;
    vAltCntAdd1 VARCHAR2(1000):=NULL;
    vAltCntAdd2 VARCHAR2(1000):=NULL;
    vAltCntAdd3 VARCHAR2(1000):=NULL;
    vorgAdd1 VARCHAR2(1000):=NULL;
    vorgAdd2 VARCHAR2(1000):=NULL;
    vorgAdd3 VARCHAR2(1000):=NULL;
    state VARCHAR2(100):=NULL;
    AltCntstate VARCHAR2(100):=NULL;
    nptycnt NUMBER:=0;
    orgstate VARCHAR2(100):=NULL;
    vstats VARCHAR2(100):=NULL;
    vAltCntstats VARCHAR2(100):=NULL;
    norgvalue NUMBER:=0;
    nPtyrolCon NUMBER:=0;
    npsnid NUMBER:=0;
    npsn NUMBER:=0;
    dFISC_YEAR_END_DT date:=NULL;
    Gender char(1):=NULL;
    vAltCntGender char(1):=NULL;
    vBRTH_DT VARCHAR2(100):=NULL;
    vAltCntBRTH_DT VARCHAR2(100):=NULL;
    BusinessDesc VARCHAR2(200):=NULL;
    dBRTH_DT date:=NULL;
    dAltCntBRTH_DT date:=NULL;
    prmycnt VARCHAR2(100):=NULL;
    vpsnstats VARCHAR2(100):=NULL;
    vAltCntpsnstats VARCHAR2(100):=NULL;
    vPartySysKey VARCHAR2(100):=NULL;
    vFaxno VARCHAR2(100):=NULL;
    vAltCntFaxno VARCHAR2(100):=NULL;
    vorgFaxno VARCHAR2(100):=NULL;
    nRlplptyid CHBM_PARTY_RELATIONSHIP.ROLE_PLAYR_PRTY_ID%TYPE:=NULL;
    vurladdr VARCHAR2(100):=NULL;
    vAltCnturladdr VARCHAR2(100):=NULL;
    FST_NM VARCHAR2(100):=NULL;
    orgFST_NM VARCHAR2(100):=NULL;
    AltCntorgFST_NM VARCHAR2(100):=NULL;
    LST_NM VARCHAR2(100):=NULL;
    orgLST_NM VARCHAR2(100):=NULL;
    AltCntorgLST_NM VARCHAR2(100):=NULL;
    MID_NM VARCHAR2(100):=NULL;
    orgMID_NM VARCHAR2(100):=NULL;
    AltCntorgMID_NM VARCHAR2(100):=NULL;
    PFX_NM VARCHAR2(100):=NULL;
    orgPFX_NM VARCHAR2(100):=NULL;
    AltCntorgPFX_NM VARCHAR2(100):=NULL;
    SUFX_NM VARCHAR2(100):=NULL;
    orgSUFX_NM VARCHAR2(100):=NULL;
    AltCntorgSUFX_NM VARCHAR2(100):=NULL;
    naddcnt NUMBER:=0;
    nAltaddcnt NUMBER:=0;
    norgseq NUMBER:=NULL;
    nADDR_IDseq NUMBER:=NULL;
    npsnidseq NUMBER:=NULL;
    nAltCntpsnidseq NUMBER:=NULL;
    vTransrefguid VARCHAR2(1000):=NULL;
    nRecfound NUMBER:=0;
    partytypecode varchar2(100):=null;
    AltCntpartytypecode varchar2(100):=null;
    RelationRoleCode VARCHAR2(100):=NULL;
    cUpdateflag CHAR(1):='N';
    vupdatequery CLOB:=null;
    plancode varchar2(100):=null;
    usercreated VARCHAR2(200):=null;
    openeddate VARCHAR2(100);
    openedtime varchar2(100);
    vopeneddate VARCHAR2(100);
    dopeneddate date;
    naddrcnt NUMBER:=0;
    ncnt1 number:=0;
    ncnt2 number:=0;
    ncnt3 number:=0;
    ncnt4 number:=0;
    ncnt5 number:=0;
    ncnt6 number:=0;
    nDelCnt1 number:=0;
    nDelCnt2 number:=0;
    nDelCnt3 number:=0;
    nAltcnt4 number:=0;
    nAltcnt5 number:=0;
    nAltcnt6 number:=0;
    nRelcnt NUMBER:=0;
    nAltRelcnt NUMBER:=0;
    ncnt7 NUMBER:=0;
    nprscnt NUMBER:=0;
    nAltprscnt NUMBER:=0;
    nPlncnt NUMBER:=0;
    npsncnt NUMBER:=0;
    vaddupdatequery VARCHAR2(4000);
    caddUpdateflag CHAR(1):='N';
    vaddrupdatequery VARCHAR2(4000);
    vAltCntaddrupdatequery VARCHAR2(4000);
    caddrUpdateflag CHAR(1):='N';
    cAltCntaddrUpdateflag CHAR(1):='N';
    vpsnupdatequery VARCHAR2(4000);
    vAltCntpsnupdatequery VARCHAR2(4000);
    cpsnUpdateflag CHAR(1):='N';
    cAltCntpsnUpdateflag CHAR(1):='N';
    vCntInterestPercent VARCHAR2(200);
    vAltCntInterestPercent VARCHAR2(200);
    vCntdatarep varchar2(100);
    vAltCntdatarep varchar2(100);
    vAltcnt XMLTYPE:=NULL;
    eParsererror EXCEPTION;
    PRAGMA EXCEPTION_INIT(eParsererror,-31011);
    eUniqueexception EXCEPTION;
    PRAGMA EXCEPTION_INIT(eUniqueexception,-00001);
    eplanexception EXCEPTION;
    PRAGMA EXCEPTION_INIT(eplanexception,-02291);
    eEventexception EXCEPTION;
    PRAGMA EXCEPTION_INIT(eEventexception,-01400);
    BEGIN
    BEGIN
    xData := XMLTYPE.createxml(PIN_XML_DATA);
    END;
    BEGIN
    SELECT extractvalue(value(t),'/TXLifeRequest/TransRefGUID')
    INTO vTransrefguid
    FROM TABLE (XMLSEQUENCE (EXTRACT (xData,'/TXLife/TXLifeRequest'))) t
    WHERE existsnode(value(t),'/TXLifeRequest/TransRefGUID')=1
    AND extractvalue(value(t),'/TXLifeRequest/TransRefGUID') IS NOT NULL;
    EXCEPTION
    WHEN NO_DATA_FOUND THEN
    ncode:=5;
    nErrcode:=200;
    vStatus:='FAILURE';
    vStatusinfo:='General Data Error';
    Raise_application_error(-20201,'Transrefguid does not exist');
    END;
    BEGIN
    SELECT t.vActivityCode,
    t.vSubActivityCode
    INTO vActivityCode,
    vSubActivityCode
    FROM (
    SELECT xData doc
    FROM dual
    ) temp_table,
    XMLTable ( '/TXLife/TXLifeRequest/OLifE' passing doc
    COLUMNS
    vActivityCode VARCHAR2(20) path 'Activity/ActivityCode',
    vSubActivityCode VARCHAR2(20) path 'Activity/OLifEExtension/ActivityExtension/SubActivityCode'
    ) t;
    EXCEPTION
    WHEN NO_DATA_FOUND THEN
    ncode:=5;
    nErrcode:=200;
    vStatus:='FAILURE';
    vStatusinfo:='RESULTINFO_DATA ';
    Raise_application_error(-20201,'General Data Error');
    END;
    IF vActivityCode='CHBM10003' AND vSubActivityCode='CHBM20002' THEN
    FOR b IN (
    SELECT t.vAltCntcity vAltCntcity,
    t.Partysyskey Partysyskey,
    t.vAltCntZip vAltCntZip,
    t.vAltCntGovtID vAltCntGovtID,
    t.vAltCntTelno vAltCntTelno,
    t.vAltCntemailaddr vAltCntemailaddr,
    t.vAltCntstats vAltCntstats,
    t.vAltCntAdd1 vAltCntAdd1,
    t.vAltCntAdd2 vAltCntAdd2,
    t.vAltCntAdd3 vAltCntAdd3,
    t.AltCntstate AltCntstate,
    t.AltCntcntry AltCntcntry,
    t.vAltCntBRTH_DT vAltCntBRTH_DT,
    t.vAltCntGender vAltCntGender,
    t.vAltCntFaxno vAltCntFaxno,
    t.vAltCnturladdr vAltCnturladdr,
    t.AltCntorgFST_NM AltCntorgFST_NM,
    t.AltCntorgLST_NM AltCntorgLST_NM,
    t.AltCntorgMID_NM AltCntorgMID_NM,
    t.AltCntorgPFX_NM AltCntorgPFX_NM,
    t.AltCntorgSUFX_NM AltCntorgSUFX_NM,
    t.AltCntpartytypecode AltCntpartytypecode,
    t.vAltCntdatarep vAltCntdatarep,
    t1.vAltCntInterestPercent vAltCntInterestPercent,
    t1.ROID ROID
    FROM (
    SELECT xData doc FROM dual ) temp_table,
    XMLTable ( '/TXLife/TXLifeRequest/OLifE/Relation[RelationRoleCode/@tc=150][Sequence=2]' passing doc
    COLUMNS OOID varchar2(50) path '@OriginatingObjectID'
    , ROID varchar2(50) path '@RelatedObjectID'
    , vAltCntInterestpercent varchar2(100) path 'InterestPercent'
    )t1,
    XMLTable('/Party[@id=$roid]' passing vAltcnt, t1.roid as "roid"
    COLUMNS
    vAltCntcity VARCHAR2(20) path 'City',
    Partysyskey VARCHAR2(100) path 'PartySysKey',
    vAltCntZip VARCHAR2(20) path 'Address/Zip',
    vAltCntGovtID VARCHAR2(20) path 'GovtID',
    vAltCntTelno VARCHAR2(20) path 'Phone[PhoneTypeCode/@tc=2]/DialNumber',
    vAltCntemailaddr VARCHAR2(200) path 'EMailAddress/AddrLine',
    vAltCntstats varchar2(20) path 'Client/ClientStatus/@tc',
    vAltCntAdd1 varchar2(1000) path 'Address/Line1',
    vAltCntAdd2 varchar2(1000) path 'Address/Line2',
    vAltCntAdd3 varchar2(1000) path 'Address/Line3',
    AltCntstate varchar2(100) path 'Address/AddressState',
    AltCntcntry varchar2(100) path 'Address/AddressCountry',
    vAltCntBRTH_DT date path 'Person/BirthDate',
    vAltCntGender char(1) path 'Person/Gender/@tc',
    vAltCntFaxno varchar2(100) path 'Phone[PhoneTypeCode/@tc=19]/DialNumber',
    vAltCnturladdr varchar2(100) path 'URL/URLAddr',
    AltCntorgFST_NM varchar2(100) path 'Person/FirstName',
    AltCntorgLST_NM varchar2(100) path 'Person/LastName',
    AltCntorgMID_NM varchar2(100) path 'Person/MiddleName',
    AltCntorgPFX_NM varchar2(100) path 'Person/Prefix',
    AltCntorgSUFX_NM varchar2(100) path 'Person/Suffix',
    AltCntpartytypecode varchar2(10) path 'PartyTypeCode/@tc',
    vAltCntdatarep varchar2(100) path '@DataRep'
    ) t
    LOOP
    IF b.vAltCntBRTH_DT IS NOT NULL THEN
    dAltCntBRTH_DT:=to_date(b.vAltCntBRTH_DT,'yyyy-mm-dd');
    END IF;
    IF b.vAltCntdatarep != 'Removed' OR b.vAltCntdatarep IS NULL THEN
    BEGIN
    --------------Starting of CHBM_PERSON Table---------
    IF b.vAltCntstats IS NOT NULL THEN
    BEGIN
    SELECT code_val_cd
    INTO vAltCntpsnstats
    FROM chbm_code_reference
    WHERE tbl_nm='CHBM_PERSON'
    AND col_nm='STAT_CD'
    AND acord_cd =b.vAltCntstats;
    EXCEPTION
    WHEN OTHERS THEN
    ncode :=5;
    nErrcode :=2001;
    vStatus :='FAILURE';
    vStatusinfo :='RESULTINFO_DATA ';
    vInfodesc :='Person status details are not available in code reference';
    Raise_application_error(-20201,'Person status details are not available in code reference');
    END;
    END IF;
    BEGIN
    SELECT extractvalue(value(t),'/OLifE/Party[@id=/OLifE/Relation[RelationRoleCode/@tc=150][Sequence=2]/b.ROID][PartyTypeCode/@tc=1]/Phone[PhoneTypeCode/@tc=2]/DialNumber')
    INTO vAltCntDialNumberchk
    FROM TABLE (XMLSEQUENCE (EXTRACT (xData,'/TXLife/TXLifeRequest/OLifE'))) t
    WHERE existsnode(value(t),'/OLifE/Party[@id=/OLifE/Relation[RelationRoleCode/@tc=150][Sequence=2]/b.ROID][PartyTypeCode/@tc=1]/Phone[PhoneTypeCode/@tc=2]/DialNumber') =1;
    EXCEPTION
    WHEN NO_DATA_FOUND THEN
    vAltCntDialNumberchkflag:='Y';
    END;
    BEGIN
    SELECT extractvalue(value(t),'/OLifE/Party[@id=/OLifE/Relation[RelationRoleCode/@tc=150][Sequence=2]/b.ROID][PartyTypeCode/@tc=1]/Phone[PhoneTypeCode/@tc=19]/DialNumber')
    INTO vAltCntFaxnochk
    FROM TABLE (XMLSEQUENCE (EXTRACT (xData,'/TXLife/TXLifeRequest/OLifE'))) t
    WHERE existsnode(value(t),'/OLifE/Party[@id=/OLifE/Relation[RelationRoleCode/@tc=150][Sequence=2]/b.ROID][PartyTypeCode/@tc=1]/Phone[PhoneTypeCode/@tc=19]/DialNumber') =1;
    EXCEPTION
    WHEN NO_DATA_FOUND THEN
    vAltCntFaxnochkflag:='Y';
    END;
    BEGIN
    SELECT extractvalue(value(t),'/OLifE/Party[@id=/OLifE/Relation[RelationRoleCode/@tc=150][Sequence=2]/b.ROID][PartyTypeCode/@tc=1]/Person/FirstName')
    INTO vAltCntFirstnamechk
    FROM TABLE (XMLSEQUENCE (EXTRACT (xData,'/TXLife/TXLifeRequest/OLifE'))) t
    WHERE existsnode(value(t),'/OLifE/Party[@id=/OLifE/Relation[RelationRoleCode/@tc=150][Sequence=2]/b.ROID][PartyTypeCode/@tc=1]/Person/FirstName') =1;
    EXCEPTION
    WHEN NO_DATA_FOUND THEN
    vAltCntFirstnamechkflag:='Y';
    END;
    BEGIN
    SELECT extractvalue(value(t),'/OLifE/Party[@id=/OLifE/Relation[RelationRoleCode/@tc=150][Sequence=2]/b.ROID][PartyTypeCode/@tc=1]/Person/LastName')
    INTO vAltCntLastNamechk
    FROM TABLE (XMLSEQUENCE (EXTRACT (xData,'/TXLife/TXLifeRequest/OLifE'))) t
    WHERE existsnode(value(t),'/OLifE/Party[@id=/OLifE/Relation[RelationRoleCode/@tc=150][Sequence=2]/b.ROID][PartyTypeCode/@tc=1]/Person/LastName') =1;
    EXCEPTION
    WHEN NO_DATA_FOUND THEN
    vAltCntLastNamechkflag:='Y';
    END;
    BEGIN
    SELECT extractvalue(value(t),'/OLifE/Party[@id=/OLifE/Relation[RelationRoleCode/@tc=150][Sequence=2]/b.ROID][PartyTypeCode/@tc=1]/EMailAddress/AddrLine')
    INTO vAltCntEMailAddressPchk
    FROM TABLE (XMLSEQUENCE (EXTRACT (xData,'/TXLife/TXLifeRequest/OLifE'))) t
    WHERE existsnode(value(t),'/OLifE/Party[@id=/OLifE/Relation[RelationRoleCode/@tc=150][Sequence=2]/b.ROID][PartyTypeCode/@tc=1]/EMailAddress/AddrLine') =1;
    EXCEPTION
    WHEN NO_DATA_FOUND THEN
    vAltCntEMailAddressPchkflag:='Y';
    END;
    BEGIN
    SELECT extractvalue(value(t),'/OLifE/Party[@id=/OLifE/Relation[RelationRoleCode/@tc=150][Sequence=2]/b.ROID][PartyTypeCode/@tc=1]/GovtID')
    INTO vAltCntTaxidPchk
    FROM TABLE (XMLSEQUENCE (EXTRACT (xData,'/TXLife/TXLifeRequest/OLifE'))) t
    WHERE existsnode(value(t),'/OLifE/Party[@id=/OLifE/Relation[RelationRoleCode/@tc=150][Sequence=2]/b.ROID][PartyTypeCode/@tc=1]/GovtID') =1;
    EXCEPTION
    WHEN NO_DATA_FOUND THEN
    vAltCntTaxidPchkflag:='Y';
    END;
    IF b.Partysyskey IS NOT NULL THEN
    nAltCntpsnidseq:=b.Partysyskey;
    vAltCntpsnupdatequery:=vAltCntpsnupdatequery||'UPDATE CHBM_PERSON SET';
    IF dAltCntBRTH_DT IS NOT NULL THEN
    cAltCntpsnUpdateflag:='Y';
    vAltCntpsnupdatequery:=vAltCntpsnupdatequery||' brth_dt ='''||dAltCntBRTH_DT||''''||',';
    END IF;
    IF b.vAltCntGender IS NOT NULL THEN
    cAltCntpsnUpdateflag:='Y';
    vAltCntpsnupdatequery:=vAltCntpsnupdatequery||' GEND_CD ='''||b.vAltCntGender||''''||',';
    END IF;
    IF b.vAltCntGovtID IS NOT NULL THEN
    cAltCntpsnUpdateflag:='Y';
    vAltCntpsnupdatequery:=vAltCntpsnupdatequery||' TAX_ID ='''||b.vAltCntGovtID||''''||',';
    ELSIF vAltCntTaxidPchkflag='N' AND vAltCntTaxidPchk IS NULL THEN
    cAltCntpsnUpdateflag:='Y';
    vAltCntpsnupdatequery:=vAltCntpsnupdatequery||' TAX_ID ='''||NULL||''''||',';
    END IF;
    IF b.vAltCntTelno IS NOT NULL THEN
    cAltCntpsnUpdateflag:='Y';
    vAltCntpsnupdatequery:=vAltCntpsnupdatequery||' TEL_NO ='''||b.vAltCntTelno||''''||',';
    ELSIF vAltCntDialNumberchkflag='N' AND vAltCntDialNumberchk IS NULL THEN
    cAltCntpsnUpdateflag:='Y';
    vAltCntpsnupdatequery:=vAltCntpsnupdatequery||' TEL_NO ='''||NULL||''''||',';
    END IF;
    IF b.vAltCntemailaddr IS NOT NULL THEN
    cAltCntpsnUpdateflag:='Y';
    vAltCntpsnupdatequery:=vAltCntpsnupdatequery||' EMAIL_ADR ='''||b.vAltCntemailaddr||''''||',';
    ELSIF vAltCntEMailAddressPchkflag='N' AND vAltCntEMailAddressPchk IS NULL THEN
    cAltCntpsnUpdateflag:='Y';
    vAltCntpsnupdatequery:=vAltCntpsnupdatequery||' EMAIL_ADR ='''||NULL||''''||',';
    END IF;
    IF b.vAltCntFaxno IS NOT NULL THEN
    cAltCntpsnUpdateflag:='Y';
    vAltCntpsnupdatequery:=vAltCntpsnupdatequery||' FAX_NO ='''||b.vAltCntFaxno||''''||',';
    ELSIF vAltCntFaxnochkflag='N' AND vAltCntFaxnochk IS NULL THEN
    cAltCntpsnUpdateflag:='Y';
    vAltCntpsnupdatequery:=vAltCntpsnupdatequery||' FAX_NO ='''||NULL||''''||',';
    END IF;
    IF vAltCntpsnstats IS NOT NULL THEN
    cAltCntpsnUpdateflag:='Y';
    vAltCntpsnupdatequery:=vAltCntpsnupdatequery||' STAT_CD ='''||vAltCntpsnstats||''''||',';
    END IF;
    IF b.AltCntorgLST_NM IS NOT NULL THEN
    cAltCntpsnUpdateflag:='Y';
    vAltCntpsnupdatequery:=vAltCntpsnupdatequery||' LST_NM ='''||b.AltCntorgLST_NM||''''||',';
    ELSIF vAltCntLastNamechkflag='N' AND vAltCntLastNamechk IS NULL THEN
    cAltCntpsnUpdateflag:='Y';
    vAltCntpsnupdatequery:=vAltCntpsnupdatequery||' LST_NM ='''||NULL||''''||',';
    END IF;
    IF b.AltCntorgFST_NM IS NOT NULL THEN
    cAltCntpsnUpdateflag:='Y';
    vAltCntpsnupdatequery:=vAltCntpsnupdatequery||' FST_NM ='''||b.AltCntorgFST_NM||''''||',';
    ELSIF vAltCntFirstnamechkflag='N' AND vAltCntFirstnamechk IS NULL THEN
    cAltCntpsnUpdateflag:='Y';
    vAltCntpsnupdatequery:=vAltCntpsnupdatequery||' FST_NM ='''||NULL||''''||',';
    END IF;
    IF b.AltCntorgMID_NM IS NOT NULL THEN
    cAltCntpsnUpdateflag:='Y';
    vAltCntpsnupdatequery:=vAltCntpsnupdatequery||' MID_NM ='''||b.AltCntorgMID_NM||''''||',';
    END IF;
    IF b.AltCntorgPFX_NM IS NOT NULL THEN
    cAltCntpsnUpdateflag:='Y';
    vAltCntpsnupdatequery:=vAltCntpsnupdatequery||' PFX_NM ='''||b.AltCntorgPFX_NM||''''||',';
    END IF;
    IF b.AltCntorgSUFX_NM IS NOT NULL THEN
    cAltCntpsnUpdateflag:='Y';
    vAltCntpsnupdatequery:=vAltCntpsnupdatequery||' SUFX_NM ='''||b.AltCntorgSUFX_NM||''''||',';
    END IF;
    IF b.vAltCnturladdr IS NOT NULL THEN
    cAltCntpsnUpdateflag:='Y';
    vAltCntpsnupdatequery:=vAltCntpsnupdatequery||' WEB_SITE_ID ='''||b.vAltCnturladdr||''''||',';
    END IF;
    IF dopeneddate IS NOT NULL THEN
    cAltCntpsnUpdateflag:='Y';
    vAltCntpsnupdatequery:=vAltCntpsnupdatequery||' LST_UPDT_DT ='''||dopeneddate||''''||',';
    END IF;
    IF usercreated IS NOT NULL THEN
    cAltCntpsnUpdateflag:='Y';
    vAltCntpsnupdatequery:=vAltCntpsnupdatequery||' LST_UPDT_BY_USER_ID ='''||usercreated||''''||',';
    END IF;
    vAltCntpsnupdatequery := SUBSTR(vAltCntpsnupdatequery,1,instr(vAltCntpsnupdatequery,',',-1,1)-1);
    vAltCntpsnupdatequery:=vAltCntpsnupdatequery||' WHERE psn_id='''||nAltCntpsnidseq||'''';
    IF cAltCntpsnUpdateflag='Y' THEN
    EXECUTE IMMEDIATE vAltCntpsnupdatequery;
    vAltCntpsnupdatequery := NULL;
    nAltcnt4:=Sql%rowcount;
    END IF;
    END IF;
    END LOOP;
    END IF;
    END;
    Regards,
    Jyothirmai

  • SAX parser issue

    We have a package within which we call a java stored procedure. The purpose of this java stored proc is to convert an input xml and insert the data into a flat structured table.The parser class used in this org.apache.xerces.parsers.SAXParser.
    We do not have issues when we call this for one time. But when a call is made to the main package second time in the same session we are getting the below error.
    'Could not load XML parser: SAX2 driver class org.apache.xerces.parsers.SAXParser not found'
    Any help to fix this error would be highly appreciated

    Arun,
    Maybe JDBC logging will help?
    You can find a link to a white paper about it from this Web page:
    http://www.oracle.com/technology/tech/java/sqlj_jdbc/index.html
    Of-course, you do realize that the Oracle database has built-in XML capability.
    Have you seen this Web page?
    http://www.oracle.com/technology/tech/xml/index.html
    Good Luck,
    Avi.

  • SOAP parse issue

    I get the following output in the log (GlassFish V3), when calling the web service (from Crystal Reports):
    SEVERE: Couldn't create SOAP message due to exception: XML reader error: com.ctc.wstx.exc.WstxUnexpectedCharException: Illegal character ((CTRL-CHAR, code 31))
    at [row,col {unknown-source}]: [1,1]
    com.sun.xml.ws.protocol.soap.MessageCreationException: Couldn't create SOAP message due to exception: XML reader error: com.ctc.wstx.exc.WstxUnexpectedCharException: Illegal character ((CTRL-CHAR, code 31))
    at [row,col {unknown-source}]: [1,1]
            at com.sun.xml.ws.encoding.SOAPBindingCodec.decode(SOAPBindingCodec.java:292)
            at com.sun.xml.ws.transport.http.HttpAdapter.decodePacket(HttpAdapter.java:276)
            at com.sun.xml.ws.transport.http.HttpAdapter.access$500(HttpAdapter.java:93)
            at com.sun.xml.ws.transport.http.HttpAdapter$HttpToolkit.handle(HttpAdapter.java:432)
            at com.sun.xml.ws.transport.http.HttpAdapter.handle(HttpAdapter.java:244)
            at com.sun.xml.ws.transport.http.servlet.ServletAdapter.handle(ServletAdapter.java:135)
            at com.sun.xml.ws.transport.http.servlet.WSServletDelegate.doGet(WSServletDelegate.java:129)
            at com.sun.xml.ws.transport.http.servlet.WSServletDelegate.doPost(WSServletDelegate.java:160)
            at com.sun.xml.ws.transport.http.servlet.WSServlet.doPost(WSServlet.java:75)Has anyone seen this, and how can I resolve it? The SOAP message is well-formed when printed so I assume there's a hidden character, e.g. byte-order-mark causing the issue but why does the parser not handle this?

    my guess is that you have a character entity (e.g. & #31;) in your xml document for a character which is invalid in xml (most of the control characters below 32 are invalid in xml). the annoyance is that the java xml serializer will happily encode said character despite the fact that it is illegal in an xml (1.0) document. you will only see the error when you parse the document (as you are seeing).
    Edited by: jtahlborn on Sep 17, 2009 2:45 PM

  • IC Agent Inbox Search Issue : -

    Hi All,
    I have some clarification regarding the IC Agent Inbox search.
    We have a situation were mails have been assigned under particular agents name.
    When he/she tries to search for the mails in "inbox search" by applying criteria like Transaction type , Categorization schema,assigned to - "my group"
    and enter search it is not pulling all the records what is expected.
    Can you guys please tell me what might be the problem here any code change or customizing changes required to set this right ?
    Please give a suggestion ASAP possible as it very urgent issue needs to resolved.
    Thank you so much for listening.
    Regards,
    SAPIENT

    Hello,
    If I were you, I would debug the query involved in work item search, and see the conditions used to retrieve the work items, and see why some are note retrieved.
    In the past, we also had some strange behaviour regarding agent inbox, so I would also check OSS notes, under application area CRM-IC-UNI.
    The DB tables involved are, if I am not mistaken, SWWWIHEAD (header info) and SWWUSERWI (assignement of workitem to users).
    By checking those 2 aspects, you might find out what is the issue in your system.
    Hope this helps.
    Best regards,
    Sylvain AGUETTAZ

  • XML Parse issues when using Network Data Model LOD with Springframework 3

    Hello,
    I am having issues with using using NDM in conjuction with Spring 3. The problem is that there is a dependency on the ConfigManager class in that it has to use Oracle's xml parser from xmlparserv2.jar, and this parser seems to have a history of problems with parsing Spring schemas.
    My setup is as follows:
    Spring Version: 3.0.1
    Oracle: 11GR2 and corresponding spatial libraries
    Note that when using the xerces parser, there is no issue here. It only while using Oracle's specific parser which appears to be hard-coded into the ConfigManager. Spring fortunately offers a workaround, where I can force it to use a specific parser when loading the spring configuration as follows:
    -Djavax.xml.parsers.DocumentBuilderFactory=com.sun.org.apache.xerces.internal.jaxp.DocumentBuilderFactoryImpl But this is an extra deployment task we'd rather not have. Note that this issue has been brought up before in relation to OC4J. See the following link:
    How to change the defaut xmlparser on OC4J Standalone 10.1.3.4 for Spring 3
    My question is, is there any other way to configure LOD where it won't have the dependency on the oracle parser?
    Also, fyi, here is the exception that is occurring as well as the header for my spring file.
    org.springframework.beans.factory.xml.XmlBeanDefinitionStoreException:
    Line 11 in XML document from URL [file:/C:/projects/lrs_network_domain/service/target/classes/META-INF/spring.xml] is invalid;
    nested exception is oracle.xml.parser.schema.XSDException: Duplicated definition for: 'identifiedType'
         at org.springframework.beans.factory.xml.XmlBeanDefinitionReader.doLoadBeanDefinitions(XmlBeanDefinitionReader.java:396)
         [snip]
         ... 31 more
    Caused by: oracle.xml.parser.schema.XSDException: Duplicated definition for: 'identifiedType'
         at oracle.xml.parser.v2.XMLError.flushErrorHandler(XMLError.java:425)
         at oracle.xml.parser.v2.XMLError.flushErrors1(XMLError.java:287)
         at oracle.xml.parser.v2.NonValidatingParser.parseDocument(NonValidatingParser.java:331)
         at oracle.xml.parser.v2.XMLParser.parse(XMLParser.java:222)
         at oracle.xml.jaxp.JXDocumentBuilder.parse(JXDocumentBuilder.java:155)
         at org.springframework.beans.factory.xml.DefaultDocumentLoader.loadDocument(DefaultDocumentLoader.java:75)
         at org.springframework.beans.factory.xml.XmlBeanDefinitionReader.doLoadBeanDefinitions(XmlBeanDefinitionReader.java:388)Here is my the header for my spring configuration file:
    <?xml version="1.0" encoding="UTF-8"?>
    <beans xmlns="http://www.springframework.org/schema/beans"
           xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
           xmlns:aop="http://www.springframework.org/schema/aop"
           xmlns:tx="http://www.springframework.org/schema/tx"
           xmlns:context="http://www.springframework.org/schema/context"
           xsi:schemaLocation="http://www.springframework.org/schema/beans http://www.springframework.org/schema/beans/spring-beans.xsd
           http://www.springframework.org/schema/aop http://www.springframework.org/schema/aop/spring-aop.xsd
           http://www.springframework.org/schema/tx http://www.springframework.org/schema/tx/spring-tx.xsd
           http://www.springframework.org/schema/context http://www.springframework.org/schema/context/spring-context.xsd">Thanks, Tom

    I ran into this exact issue while trying to get hibernate and spring working with an oracle XMLType column, and found a better solution than to use JVM arguments as you mentioned.
    Why is it happening?
    The xmlparserv2.jar uses the JAR Services API (Service Provider Mechanism) to change the default javax.xml classes used for the SAXParserFactory, DocumentBuilderFactory and TransformerFactory.
    How did it happen?
    The javax.xml.parsers.FactoryFinder looks for custom implementations by checking for, in this order, environment variables, %JAVA_HOME%/lib/jaxp.properties, then for config files under META-INF/services on the classpath, before using the default implementations included with the JDK (com.sun.org.*).
    Inside xmlparserv2.jar exists a META-INF/services directory, which the javax.xml.parsers.FactoryFinder class picks up and uses:
    META-INF/services/javax.xml.parsers.DocumentBuilderFactory (which defines oracle.xml.jaxp.JXDocumentBuilderFactory as the default)
    META-INF/services/javax.xml.parsers.SAXParserFactory (which defines oracle.xml.jaxp.JXSAXParserFactory as the default)
    META-INF/services/javax.xml.transform.TransformerFactory (which defines oracle.xml.jaxp.JXSAXTransformerFactory as the default)
    Solution?
    Switch all 3 back, otherwise you'll see weird errors.  javax.xml.parsers.* fix the visible errors, while the javax.xml.transform.* fixes more subtle XML parsing (in my case, with apache commons configuration reading/writing).
    QUICK SOLUTION to solve the application server startup errors:
    JVM Arguments (not great)
    To override the changes made by xmlparserv2.jar, add the following JVM properties to your application server startup arguments.  The java.xml.parsers.FactoryFinder logic will check environment variables first.
    -Djavax.xml.parsers.SAXParserFactory=com.sun.org.apache.xerces.internal.jaxp.SAXParserFactoryImpl -Djavax.xml.parsers.DocumentBuilderFactory=com.sun.org.apache.xerces.internal.jaxp.DocumentBuilderFactoryImpl -Djavax.xml.transform.TransformerFactory=com.sun.org.apache.xalan.internal.xsltc.trax.TransformerFactoryImpl
    However, if you run test cases using @RunWith(SpringJUnit4ClassRunner.class) or similar, you will still experience the error.
    BETTER SOLUTION to the application server startup errors AND test case errors:
    Option 1: Use JVM arguments for the app server and @BeforeClass statements for your test cases.
    System.setProperty("javax.xml.parsers.DocumentBuilderFactory","com.sun.org.apache.xerces.internal.jaxp.DocumentBuilderFactoryImpl");
    System.setProperty("javax.xml.parsers.SAXParserFactory","com.sun.org.apache.xerces.internal.jaxp.SAXParserFactoryImpl");
    System.setProperty("javax.xml.transform.TransformerFactory","com.sun.org.apache.xalan.internal.xsltc.trax.TransformerFactoryImpl");
    If you have a lot of test cases, this becomes painful.
    Option 2: Create your own Service Provider definition files in the compile/runtime classpath for your project, which will override those included in xmlparserv2.jar.
    In a maven spring project, override the xmlparserv2.jar settings by creating the following files in the %PROJECT_HOME%/src/main/resources directory:
    %PROJECT_HOME%/src/main/resources/META-INF/services/javax.xml.parsers.DocumentBuilderFactory (which defines com.sun.org.apache.xerces.internal.jaxp.DocumentBuilderFactoryImpl as the default)
    %PROJECT_HOME%/src/main/resources/META-INF/services/javax.xml.parsers.SAXParserFactory (which defines com.sun.org.apache.xerces.internal.jaxp.SAXParserFactoryImpl as the default)
    %PROJECT_HOME%/src/main/resources/META-INF/services/javax.xml.transform.TransformerFactory (which defines com.sun.org.apache.xalan.internal.xsltc.trax.TransformerFactoryImpl as the default)
    These files are referenced by both the application server (no JVM arguments required), and solves any unit test issues without requiring any code changes.
    This is a snippet of my longer solution for how to get hibernate and spring to work with an oracle XMLType column, found on stackoverflow.

  • UWL Inbox Loading Issue

    Hi,
    When trying to login in Portal system, go to "My Work" then "Overview"
    and "Inbox (UWL)", the page is stuck in the loading screen and keeps on loading.
    Current Netweaver version: SAP netweaver 7.02 sps9
    regards,
    Lester

    Hi Lester!
    Some checks would be useful in order to isolate why this is occuring:
    1 - Try to see if the hanging also occurs when loading the UWL by previewing the following iview:
         Content Administration -> Portal Content -> Content Provided by SAP -> End User Content -> Standard Portal Users -> iViews
    -> com.sap.netweaver.bc.uwl.iviews -> Universal Worklist
    If the issue also occurs, then check the following:
    2 - Try to deactivate all the connectors registered within UWL.
    You will find this under System Administration --> System Configuration --> Universal Worklist & workflow --> Universal
    Worklist Administration. Click on "Deactivate" button for all the connectors and check if this resolves. Of course this is just to isolate if the issue has something to do with one of the connectors. Later on we would have to check what connector is causing that and also the reason for this.
    If still the hanging is there after deactivating the connectors:
    3 - Last but not least, I've checked that for UWLJWF component on 7.02 SP09 there exists one patch already provided, which contains some interesting notes. If you don't have it applied and in case it is possible for you, it would be worth applying this patch and checking if this helps.
    Please update us with your findings
    Kind regards,
    Armando Zaro

  • Message inbox having issues after updating to IOS 6.1

    After updating to IOS 6.1 my SMS inbox has gone crazy. Most of the SMSs have lost their date time stamp. The time of receipt of the SMS for all of them is showing as 9:18 AM, which was the time i took the update 6.1. Is anyone else facing the same issue.
    Why is it so that for the last few updates in IOS, it is always the SMS inbox that is having issues? From the last update, the inbox has been showing blank SMSs, and now we have all the messages in inbox with the same time stamp.
    Any idea how to rectify this issue ?

    i have already this problem ,  ios 6.1  iphone 4s
    is there anyone to report this bug to apple ?  
    i did anything what i found in internet ( reset, restore, cleaning dock , earphone, and... )
    , but still not working .... !

  • OLAP universe object parsing issue

    Hi,
    We have recently upgraded to Business Objects XI 3.1 sp3 with SAP 7.1 sp5 and SAP integration kit and all the transports are done for installation.
    Using enterprise authentication i am logging into universe designer and then created a connection using SAP BW client on BEx query by providing all the login parameters (sap login usr name and pwd, application server name etc).
    Universe is created and everything is fine, but when i tried to create a calculated measure i am unable to parse object.
    i created a simple measure like
    <EXPRESSION>(@Select(Key Figures\Orders) * @Select(Key Figures\Quantity))</EXPRESSION>
    when i parse i am getting  " XML expression is correct,however the MDX expression is not parsed in this process. (UNV 00050)"
    when i used this calculated measure in webi, column is empty.how ever other objects are working fine in webi report and i could able to perform all calculations in webi.
    Can any one tell me what could be the issue with object parsing.
    Thanks,
    Harsha

    Hi,
    I tried all the syntaxes but still the measure is not parsing, before upgrading In BO XI 3.1 sp2 i have created calculated measures and there was no issue.but after the upgrading to BO XI 3.1 sp3 i am not able to create calculated measures in universe I am using BEx query as source i have created some RKF's and CKF's in BEx, and i need to create some measures in universe as per reqmt.
    I ran the report including the measure with below formula
    <EXPRESSION>(@Select(Key Figures\Orders) * @Select(Key Figures\Quantity))</EXPRESSION>
    MDX generated is as below:
    WITH MEMBER [4IVR0WPP0WQB4EFAXRVX90OQ4].[BD4D9550-F4CD-4289-AA,CC,A4,21,82,3B,1B,EB] AS ' ([4IVR0WPP0WQB4EFAXRVX90OQ4].[4IW2HB8NU8VBIMMCXYNRQZNZG] *
    [4IVR0WPP0WQB4EFAXRVX90OQ4].[4IW2HBO0W62QJVP99MSGB3LF0]) '  SELECT  { [4IVR0WPP0WQB4EFAXRVX90OQ4].[BD4D9550-F4CD-4289-AA,CC,A4,21,82,3B,1B,EB],
    [4IVR0WPP0WQB4EFAXRVX90OQ4].[4IW2HB8NU8VBIMMCXYNRQZNZG], [4IVR0WPP0WQB4EFAXRVX90OQ4].[4IW2HBO0W62QJVP99MSGB3LF0] }  ON COLUMNS , NON EMPTY
    [CS_LOCN].[LEVEL01].MEMBERS ON ROWS FROM [MP_003_BO] SAP VARIABLES [!V000006] INCLUDING [0FISCPER3].[001] : [0FISCPER3].[008] [0P_FYEAR] INCLUDING
    [0FISCYEAR].[Z12010] [!V000003] INCLUDING [CS_VAC].[020]
    here the MDX is incorrect the calculated measure is appearing before the SELECT statement in above MDX.
    I would like to know that any MDX driver is missing and also how to debug this issue.
    Thanks,
    Harsha

  • Ciscoworks feed parsing issue

    Sentinel 6.1 will not parse my feed from Ciscoworks. All network syslog
    data is collected by ciscoworks and stored in a file syslog.log. This
    file can be pulled by the collector manager as a file source or pushed
    via Snare to the collector mgr.. the data cannot be parsed using either
    method using standard Cisco Collector (Cisco IOS Router xx Cisco Switch
    and Router 6.1r2).
    Is there a working collector or do I have to build one?
    eisensee
    eisensee's Profile: http://forums.novell.com/member.php?userid=98444
    View this thread: http://forums.novell.com/showthread.php?t=425629

    OK, hmm...
    1) At issue is more likely the Collector version, not so much the
    platform version. The old Collectors made an attempt at correcting some
    weird syslog formats, but the feature ended up being too confusing and
    error prone for us to support. The new Collectors only support proper
    RFC-compliant syslog, for a number of reasons which we can get into if
    you like.
    2) I may be wrong, but I believe a customer told me that latter-day
    versions of CiscoWorks introduced a syslog forwarding option. I poked
    around on Cisco for a bit, but there are hundreds of specific products
    with the 'CiscoWorks' label so I don't know what applies.
    3) OK, so here's the deal. RFC-compliant syslog message are constructed
    as:
    MMM DD HH:MM:SS hostid message
    The original message from your switch should look something like:
    Nov 11 15:30:17 172.253.248.33
    \/\/426174\/801DF193ED75\/CCAPI\/cc_api_call_connected:
    It actually looks like (guessing a bit, here:
    Nov 11 15:30:17 172.253.248.33 2182635: 418971: Nov 11 15:30:14.739:
    \/\/426174\/801DF193ED75\/CCAPI\/cc_api_call_connected:
    Which indicates that a couple numbers and another timestamp are being
    injected into the "message" portion. May or may not be an issue, if the
    Collector handles it that way - review the Collector doc for proper
    configuration details.
    But then your Epilog gets a hold of the message, and inserts *another*
    header:
    Nov 11 15:30:54 10.101.251.4 sm-ciscowks.smad2.savemart.com\t\t0\tNov
    11 15:30:17 172.253.248.33 2182635: 418971: Nov 11 15:30:14.739:
    \/\/426174\/801DF193ED75\/CCAPI\/cc_api_call_connected:
    This violates RFC3164 in a number of ways, namely:
    - it's not supposed to modify the original message IN ANY WAY if it's
    already a proper syslog message (of course, Epilog may assume it's NOT a
    syslog message, since it's in a file)
    - It's using a fully-qualified hostname in its header, which is NOT
    VALID
    - There are tab characters after the header, which aren't proper syslog
    characters
    If I couldn't configure Epilog to not be stupid, what I would do is
    create a little 'custom.js' script, and define my customerPreparse()
    method to strip off the entire ugly Epilog header, something like:
    Record.prototype.customPreparse = function() {
    this.s_RXBufferString =
    this.s_RXBufferString.substr(this.s_RXBufferString .lastIndexOf("\t"));
    (You may need to do the same thing to rec.s_Body as well, and note that
    I haven't tested this code at all!).
    Then just follow the normal process to inject custom.js into your
    Collectors, set the Execution Mode to 'custom', and you'll be up and
    running.
    NOTE: the major thing that Epilog is breaking here, however, is not the
    Collector - the Syslog Connector also does some minimal parsing of the
    input and will automatically create Event Source nodes based on the
    syslog header. The syslog header is supposed to list the hostid of the
    ORIGINAL event source as it's second element (after the timestamp), and
    by injecting the ciscoworks device hostid, Epilog breaks that (in our
    parlance, that's the Reporter, not the Observer).
    If you look directly at the file on the CiscoWorks device, what does it
    look like? Everything after the \t\t0\t in the sample you sent?
    You might ditch Epilog entirely and use something like tail -F or
    'netcat' instead, which won't add silly stuff to the messages.
    DCorlette
    DCorlette's Profile: http://forums.novell.com/member.php?userid=4437
    View this thread: http://forums.novell.com/showthread.php?t=425629

  • SAP inbox Search issue

    We went live with ECC 6.0 from 4.7. a week ago. The SAP inbox used to work fine in 4.7. In ECC 6.0, The users are having trouble searching the workitems in SAP inbox. When user clicks on binocular icon, and enters the search term , even though the workitem exists in the users inbox, the search result is giving " no hits found' message.
    Did anyone come across such issues ????
    Edited by: NK_ABAPER on May 26, 2010 4:21 PM

    Search for some OSS notes.
    Note 1149144 - SWF_WORKPLACE:Composite SAP Note Business Workflow Workplace
    Thanks
    Arghadip

Maybe you are looking for

  • Problem Displaying Value of LOV

    I have a drop down on one of my edit screens that gives a list of Regions. On the screen the user can select the correct value and click Apply Changes and the database gets updated. The problem is that if I click to edit that record again it shows th

  • HT1635 where can I get the power adapter for       MC207xx/A . It's a 60W "T" connector

    where can I get the power adapter for  MC207xx/A . It's a 60W "T" connector

  • Gtkpod won't recognize ipod touch

    I've installed gtkpod and ifuse in the hopes that I can synch with my 2nd generation ipod touch running iOS 3.1.2. With ifuse I am able to mount the ipod successfully and have no trouble reading or writing to the mount. When I run gtkpod -m /mnt/ipod

  • Sql Server Error 2

    When Im Install Its Working Perfect.. But Upgrading Window Into Windows 10 its giving this error at the time of connecting.. After upgrading Window Also Apper a new Folder. Windows.old

  • Theme20 in Orange color instead of Blue

    Hello all, I have created an application in theme20 which looks so much better in Theme8 (orange & grey). I have switched to theme 8 but now my regions, navigation bars and calendar look funny. Is it possible to change the color scheme from blue to o