BGP Advertisement to Specific AS Number

HOw to setup BGP so it will not get advertised to specific AS.
Example:
My BGP AS 1000 and i peer with AS 2000 and 3000. I want to tell BGP AS 2000 not to advertise to AS 100, and 200.
Or i want to advertise my blocks to all internet but i want to make sure AS 100 and 200 wont have my prefix in the BGP table.
thanks

Hello,
Create a "peer-group" where you will add those two AS to the peer-group. And apply "mhnedirli" solution above...
and use :
neighbor <peer-group-name> route-map BLOCK out

Similar Messages

Advertise a specific subnet to a BGP neighbour out of an aggregate

Dear all,
I just wanted to know what your thoughts are on the following issue that I have. I have an internal Router that receives various subnets of the 10.0.0.0/8 from internal core routers via an IGP. I have an IPBGP peering with a WAN router which has a static route 10.0.0.0/8 pointing back.
I need to advertise a specific subnet say 10.64.0.0/10. from the internal router to the WAN router who will then advertise to an EBGP peer.
However, when I do this I lose connectivity to the WAN router because it seems it ignores the 10.0.0.0/8 in favor of 10.64.0.0/10 because it is more specific.
I have added 10.0.0.0/10, 10.64.0.0/10 & 10.128.0.0/10 as static routes to the WAN router and I no longer lose connectivity. Any ideas of a better
solution ?

Yes but the original problem was that without the additional subnets you had static entries for you lost connectivity.
And you said it was because 10.64.0.0/10 was more specific.
But that is irrelevant because a static route will always be in the routing table unless you are modifying the AD.
Which means regardless of whether you are advertising a more specific subnet with BGP it makes no difference from the WAN routers perspective unless the subnet you are advertising via BGP is using a different next hop IP.
What is the next hop IP for the 10.0.0.0/8 static route on the WAN router ?
And what is the next hop IP for the 10.64.0.0/10 BGP route on the WAN router ?
Note not the static route you added but the BGP route.
Jon

Cannot send messages to a specific UK number via U...

Hi
I am having trouble sending an SMS to a *specific* UK number. The number can receive SMSs OK from me using my UK SIM, even while I'm in the states.
The combinations I have tried are:
* handset 6101b in UK with UK sim - OK
* handset 7250i in UK with UK sim - OK
* handset 7250i in USA with UK sim - OK
* handset 6101b in USA with USA sim - problem
So it's not my handset that's the problem, it looks like it's the USA sim or network (t-mobile) that's the problem.
I can send SMS to other UK number using my USA phone ok, just not this one specific number.
The phone says "Sending.... Message Sent" and the immediately the delivery report comes in saying "Not Sent To xyz".
Could it be that the recipient network (PAYG) has banned *receipt* of international messages? Seems unlikely. The recipient network is Tesco.
Could it be that my USA network has banned me from sending messages to this UK network? I doubt it as all my other USA-to-UK messages are received.
Any thoughts please?
Many thanks
DanielMessage Edited by dc197 on 20-Jun-2006
09:01 PM

I would think it'd be a problem with the handset rather than the operators... Can't think what though if it's sending texts to other numbers...
Strange...
Ask them to get a new number? maybe not lol
Nokia History: 3110, 5110, 7110, 7110, 3510i, 6210, 6310i, 5210, 6100, 6610, 7250, 7250i, 6650, 6230, 6230i, 6260, N70, N70, 5300, N95, N95, E71, E72
Android History: HTC Desire, SE Xperia Arc, HTC Sensation, Sensation XE, One X+, Google Nexus 5

MOH not working on specific phone number after uploading new MOH file

We have Cisco Unified CM Administration version 8.0.3.20000-2.
Our college has a global MOH (music on hold) file (MOH_040208) that plays for everyone. I was trying to figure out how to upload a different music file (MOH_101311) to see if I could get that MOH file to play only on my phone number (extension). I uploaded a file via Cisco Unified CM Administration>Media Resources>MOH Audio File Management. The upload appeared to be successful (no errors). Then, I went to Media Resources>Music On Hold Server Audio Sources and assigned the next available stream number (#3) to this newly uploaded MOH file.
Next, I went to Device>selected my device name>selected Line #1 and changed the User Hold MOH Audio Source and Network Hold MOH Audio Source from <None> to the newly uplodaded file, MOH_101311. I saved and applied config. During testing, I found that when my line puts anyone on hold, all they hear is silence. However, the college's global music on hold plays for everyone else. On my line, I removed the selection from User Hold MOH Audio Source and Network Hold MOH Audio Source, which put it back to its default of <None>. I deleted the MOH_101311 file from the phone system by removing it from the following two locations: Cisco Unified CM Administration>Media Resources>MOH Audio File Management and Media Resources>Music On Hold Server Audio Sources. However, my line will still not play music when I put someone on hold; then caller only hears silence. I rebooted my phone by unplugging it and plugging it back in, but this did not resolve the issue.
Did I do something incorrectly when trying to get a new MOH file to play on a specific phone number/extension? If so, can someone tell me the correct steps?
Any suggestions on how to make my phone number/extension go back to the way it was and play the college's default MOH file?
Thanks,
Angie

Try resetting it: hold on/off and home buttons simultaneously 10-15 seconds until you see the Apple logo (ignoring the red off slider which appears first), release and wait for the phone to restart.

How do you open a PDF to a specific page number in Safari 8.0?

I'm using the command #page=33 to try to force Safari to open a PDF to a specific page number. While this works fine on just about every website browser, it doesn't seem to work in Safari. What am I doing wrong?
Thanks!

The problem is most likely with the Safari PDF plugin, which doesn't process the open parameters correctly. To be fair, though, this is not a part of the PDF ISO specification but something that Adobe implemented on their own in their PDF plugins, so other applications are not obliged to follow it.
If you switch to using the Adobe plugin then it should work, even in Safari.

Specific part number of decription/name of adapter required to use my iPad Air to my PNY High Performance 64GB High Speed microSDXC Class 10 UHS-1 up to 40MB/sec Flash Memory Card -P-SDUX64U1-GE-A

Specific part number or decription/name of adapter required to use my iPad Air to a PNY High Performance 64GB High Speed microSDXC Class 10 UHS-1 up to 40MB/sec Flash Memory Card -P-SDUX64U1-GE-A

I think you need this.

Customer specific serial number

Hi,
I am creating a customer specific 13 digitt serial number during production order creation. This serial number is getting populated in my production order.
But i could not see this serial number in IQ02.
In this 13 digit serial number last 5 digits are internal number number from system. These 5 digits are getting stored in IQ02.
How can i get the customer specific serial number available in production orders in IQ02.
Thanks,
nandha

Hi,
That's what i am thinking.
Already i am having prodn order- serial number link.
Request you to provide any BAPI 's are available so that i can access ser05 and objk and get the created serial number and pass this to BAPI and create the serial numbers once again in IQ01.
Also how to define and where to define that serial numbers are external.
Thanks,
nandha

How do I order a specific phone number

Hello to all,
Who can I contact to order a specific phone number for my new business? It'll be a local geographic landline where I live and operate, but I want to choose the number. Any direction or contact would be greatly appreciated.
Many thanks
Andy
"Wishing everyone a very merry Christmas and a healthy and prosperous 2015"

you need to contact BT business this is a residential users forum try this link https://business.forums.bt.com/t5/Broadband-and-internet/bd-p/Broadband
If you want to say thanks for a helpful answer,please click on the Ratings star on the left-hand side If the reply answers your question then please mark as ’Mark as Accepted Solution’

How can I see which specific page number I'm on in a Pages document?

How can I see which specific page number I'm on in a Pages document? Thanks.

Hi and thanks. Pages is V 5.0.1. And I've got OSX 10.9.1.
I just tried what you suggested and while it works I'm looking for something like what a Word doc shows, where at the bottom of the screen you see - Pages: 1 of 37 (it's to the left of where a Word doc shows - Words: 7 of 9024).
I recently switched to Pages and want to start using it all the time and get rid of Word.

How can we repeat specific page number of pdf file by using FDF Toolkit for Windows?

how can we repeat specific page number of pdf file by using FDF Toolkit for Windows?

let's say a registration form, there is only 1 full address provided in my registration pdf, but applicant could have more than 1 address, so i have to make it more flexible to extend the address page no matter how many addresses that applicant provided, i have use adobe acrobat pro to edit the form properties. but dont know how to extend/duplicate a page in felxible times.
Please advise~ tks so much!!! George

Plant specific equipment number ranges

Hi,
Is there ay possibility to maintain plant specific Equipment number ranges,kindly suggest

Naveen,
Equipment number ranges are defined at client level. Probably what I could suggest is to create new equipment category for different plants and for that you can assign different number ranges.
Regards,
Prasobh

Is there a way for this community, to make a suggestion to Apple to include blocking a specific contact number calls and messages just as other phones provide that feature for their users.

Is there a way for this community, to make a suggestion to Apple to include blocking a specific contact number calls and messages just as other phones provide that feature for their users.

No phone provides true call blocking. At best, they provide call diversion. Essentially, the call is answered and disconnected automatically. If I recall, Apple is adding call diversion features in iOS 7.
Best of luck.

How do i configure telnet service to use a specific port number

How do I configure a specific port number to the telnet service other than the default port number. I opened /System/Library/LaunchDaemon/telnet.plist with XCode but it won't let me modify the port number. Is there another place / item that I need to go to?

Telnet is obsolete and insecure. Use ssh instead.

Hello-- I'am thinking off making an app to the iphone, but i'am not sure aboutsomething. the app should get some alarms from a specific phone number, and my question is, can i make an app that can receive message from a specific phone number ?

Hello-- I'am thinking off making an app to the iphone, but i'am not sure aboutsomething. the app should get some alarms from a specific phone number, and my question is, can i make an app that can receive message from a specific phone number ?

This needs to be asked at http://developer.apple.com/

Cannot Call Out to Specific Phone Number

I am not able to call out to a specific phone number from the iPhone.
I am able to call this specific phone number from different sources. ie. Another cell phone, lan line, work, etc...
Any clues on why just a specific phone number cannot be made to?
When I try to call, I always get 2 beep sounds only and says the Call Ended.
I get no Dial tone when I call also.
ps.
It could be that somehow they blocked my cell phone number.
But, I do not believe so.
-JK

PlyHrd wrote:
The phone number I'm trying to call is from T-Mobile. (Could be the culprit!)
Aha! T-Mobile is so ticked at losing out to AT&T that they are blocking incoming calls from iPhones!

BGP Advertisement to Specific AS Number

Similar Messages

Maybe you are looking for