BGP icmp Message:BGP: Applying map to find origin for x.x.5.0/24

Question

I've put what I hope is the relevant portions of the config in the body here. I'm curious about the message as this router is supposed to be the origin for the subnet in the first place?
interface Vlan99
ip address x.x.5.1 255.255.255.0
router bgp 65004
no synchronization
bgp log-neighbor-changes
network x.x.5.0 mask 255.255.255.0
neighbor 10.10.1.2 remote-as 65004
neighbor 10.10.1.2 next-hop-self
neighbor 10.10.1.2 soft-reconfiguration inbound
neighbor x.x.72.109 remote-as XXXX
neighbor x.x.72.109 password 7 blahblahblah
neighbor x.x.72.109 soft-reconfiguration inbound
neighbor x.x.72.109 route-map asXXXXonly in
no auto-summary
ip as-path access-list 30 permit ^XXXX$
route-map asXXXXonly permit 10
match as-path 30
Thanks for any help!

Answer 1

Is your BGP routing operation working normally? If yes, and even then you receive this msg, then I am sure it is a normal BGP message which prints when 'debug ip bgp' is enabled. The BGP scanner process runs every 60 seconds and verifies a variety of things such as verifying the validity of bgp route origin. So basically it looks as though someone has turned debugging on. Please issue the "show debug" command as this will show what specific debugging is on. You can disable it by .