BGP Problems when activate 1-100GbE linecard

I have a CRS-8/S with version 4.0.1 installed.
I configured bgp multipath load-balacing and maximum-paths 6 EBGP.
I have 7 bgp peers, however due to the maximum-paths 6 EBGP, only six of them"work".
A few days, I installed the card 1-100GbE on CRS. At that time we started to have 8 bgp peers.
After installing this card, I got 5 links 10G and 100G works, in the context of BGP, however were the 10G with some installability.
Is it normal?
I can pass the idea?

It is ok Luis,
how have you measured those instabilities? and the big question whether you have them at the time being or they have disappeared by themselves?
were there any peer flaps registered? any performance-related issues?
I could think of different BGP tables those peers have been announcing to your box, can you check and confirm the same please?
In general, there is no distinction be it 10GE or 100GE in terms of how well the load-balancing would work.
HTH,
Ivan.

Similar Messages

Problem when activate SAP Inbound IDOC Project

hello,
We are using the Fusion 11g and the SAP Adapter is the 11g P2 using the SAP JCO 3.0.
I am getting the following error in the OSB server log when I import a project then activate it. I will send an IDOC from SAP and the SAP Adapter will except the message but will throw the message to the bite bucket. It will say No subscriber for this Channel. I believe this is do to the error when import and activate the project. Below is the error message I get in the osb server.log. I have checked the configure using the test tool and I can see everything just file. We exported this into another osb domain and the project work just fine. We are trying to figure out the issue with this osb domain before we just toss it.
####<Oct 29, 2010 5:43:05 PM PDT> <Error> <JCA_FRAMEWORK_AND_ADAPTER> <camintd9> <osb_server_dev1> <[ACTIVE] ExecuteThread: '8' for queue: 'weblogic.kernel.Default (self-tuning)'> <deytel> <> <da0648933571bbbb:49aa3b48:12bfa0af692:-7fe4-0000000000000130> <1288399385547> <BEA-000000> <Error while performing endpoint Activation: java.lang.NullPointerException
java.lang.NullPointerException
at com.iwaysoftware.afjca15.IWAFOracleResourceAdapter.endpointActivation(IWAFOracleResourceAdapter.java:266)
at oracle.tip.adapter.sa.impl.fw.jca.AdapterFrameworkImpl.endpointActivation(AdapterFrameworkImpl.java:498)
at oracle.tip.adapter.sa.impl.inbound.JCABindingActivationAgent.activateEndpoint(JCABindingActivationAgent.java:325)
at oracle.tip.adapter.sa.impl.JCABindingServiceImpl.activate(JCABindingServiceImpl.java:113)
at com.bea.wli.sb.transports.jca.binding.JCATransportInboundOperationBindingServiceImpl.activateService(JCATransportInboundOperationBindingServiceImpl.java:325)
at com.bea.wli.sb.transports.jca.JCATransportEndpoint.activateJCABindingService(JCATransportEndpoint.java:122)
at com.bea.wli.sb.transports.jca.JCATransportProvider.activationComplete(JCATransportProvider.java:507)
at sun.reflect.GeneratedMethodAccessor270.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at com.bea.wli.sb.transports.Util$1.invoke(Util.java:83)
at $Proxy134.activationComplete(Unknown Source)
at com.bea.wli.sb.transports.ResourceLifecycleListenerImpl$EndPointOperationCommon.activationComplete(ResourceLifecycleListenerImpl.java:748)
at com.bea.wli.sb.transports.ResourceLifecycleListenerImpl.activationComplete(ResourceLifecycleListenerImpl.java:336)
at com.bea.wli.sb.transports.ResourceLifecycleListenerImpl.changesCommitted(ResourceLifecycleListenerImpl.java:153)
at com.bea.wli.sb.transports.TransportManagerImpl.changesCommitted(TransportManagerImpl.java:1205)
at com.bea.wli.sb.service.ServiceChangeListener.changesCommitted(ServiceChangeListener.java:146)
at com.bea.wli.config.impl.ResourceListenerNotifier.afterEnd(ResourceListenerNotifier.java:120)
at com.bea.wli.config.transaction.TransactionListenerWrapper.afterEnd(TransactionListenerWrapper.java:90)
at com.bea.wli.config.transaction.TransactionManager.notifyAfterEnd(TransactionManager.java:1154)
at com.bea.wli.config.transaction.TransactionManager.commit(TransactionManager.java:1519)
at com.bea.wli.config.transaction.TransactionManager._endTransaction(TransactionManager.java:842)
at com.bea.wli.config.transaction.TransactionManager.endTransaction(TransactionManager.java:783)
at com.bea.wli.config.deployment.server.ServerDeploymentReceiver$2.run(ServerDeploymentReceiver.java:275)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
at com.bea.wli.config.deployment.server.ServerDeploymentReceiver.commit(ServerDeploymentReceiver.java:260)
at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer.doCommitCallback(DeploymentReceiverCallbackDeliverer.java:195)
at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer.access$100(DeploymentReceiverCallbackDeliverer.java:13)
at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer$2.run(DeploymentReceiverCallbackDeliverer.java:68)
at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:528)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
>
####<Oct 29, 2010 5:43:05 PM PDT> <Error> <JCATransport> <camintd9> <osb_server_dev1> <[ACTIVE] ExecuteThread: '8' for queue: 'weblogic.kernel.Default (self-tuning)'> <deytel> <> <da0648933571bbbb:49aa3b48:12bfa0af692:-7fe4-0000000000000130> <1288399385559> <BEA-381959> <Failed to activate JCABindingService for wsdl: servicebus:/WSDL/SAP_Inbound_IDOC/wsdls/Z_NIKE10_IDOC_receive, operation: Z_NIKE10_IDOC, exception: BINDING.JCA-12600
Generic error.
Generic error.
Cause: {0}.
Please create a Service Request with Oracle Support.
BINDING.JCA-12600
Generic error.
Generic error.
Cause: {0}.
Please create a Service Request with Oracle Support.
at oracle.tip.adapter.sa.impl.inbound.JCABindingActivationAgent.activateEndpoint(JCABindingActivationAgent.java:329)
at oracle.tip.adapter.sa.impl.JCABindingServiceImpl.activate(JCABindingServiceImpl.java:113)
at com.bea.wli.sb.transports.jca.binding.JCATransportInboundOperationBindingServiceImpl.activateService(JCATransportInboundOperationBindingServiceImpl.java:325)
at com.bea.wli.sb.transports.jca.JCATransportEndpoint.activateJCABindingService(JCATransportEndpoint.java:122)
at com.bea.wli.sb.transports.jca.JCATransportProvider.activationComplete(JCATransportProvider.java:507)
at sun.reflect.GeneratedMethodAccessor270.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at com.bea.wli.sb.transports.Util$1.invoke(Util.java:83)
at $Proxy134.activationComplete(Unknown Source)
at com.bea.wli.sb.transports.ResourceLifecycleListenerImpl$EndPointOperationCommon.activationComplete(ResourceLifecycleListenerImpl.java:748)
at com.bea.wli.sb.transports.ResourceLifecycleListenerImpl.activationComplete(ResourceLifecycleListenerImpl.java:336)
at com.bea.wli.sb.transports.ResourceLifecycleListenerImpl.changesCommitted(ResourceLifecycleListenerImpl.java:153)
at com.bea.wli.sb.transports.TransportManagerImpl.changesCommitted(TransportManagerImpl.java:1205)
at com.bea.wli.sb.service.ServiceChangeListener.changesCommitted(ServiceChangeListener.java:146)
at com.bea.wli.config.impl.ResourceListenerNotifier.afterEnd(ResourceListenerNotifier.java:120)
at com.bea.wli.config.transaction.TransactionListenerWrapper.afterEnd(TransactionListenerWrapper.java:90)
at com.bea.wli.config.transaction.TransactionManager.notifyAfterEnd(TransactionManager.java:1154)
at com.bea.wli.config.transaction.TransactionManager.commit(TransactionManager.java:1519)
at com.bea.wli.config.transaction.TransactionManager._endTransaction(TransactionManager.java:842)
at com.bea.wli.config.transaction.TransactionManager.endTransaction(TransactionManager.java:783)
at com.bea.wli.config.deployment.server.ServerDeploymentReceiver$2.run(ServerDeploymentReceiver.java:275)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
at com.bea.wli.config.deployment.server.ServerDeploymentReceiver.commit(ServerDeploymentReceiver.java:260)
at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer.doCommitCallback(DeploymentReceiverCallbackDeliverer.java:195)
at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer.access$100(DeploymentReceiverCallbackDeliverer.java:13)
at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer$2.run(DeploymentReceiverCallbackDeliverer.java:68)
at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:528)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
Caused By: BINDING.JCA-12517
Endpoint Activation Error.
AdapterFrameworkImpl::endpointActivation - Endpoint Activation Error.
The Resource Adapter IWAFOracleResourceAdapter was unable to activate the endpoint com.iwaysoftware.afjca15.IWAFOracleActivationSpec:{AdapterName=MySAP, ChannelName=IDOC_Inbound_ER1_110} due to the following reason: java.lang.NullPointerException
Please correct the reported issue and redeploy the BPEL process.
at oracle.tip.adapter.sa.impl.fw.jca.AdapterFrameworkImpl.endpointActivation(AdapterFrameworkImpl.java:525)
at oracle.tip.adapter.sa.impl.inbound.JCABindingActivationAgent.activateEndpoint(JCABindingActivationAgent.java:325)
at oracle.tip.adapter.sa.impl.JCABindingServiceImpl.activate(JCABindingServiceImpl.java:113)
at com.bea.wli.sb.transports.jca.binding.JCATransportInboundOperationBindingServiceImpl.activateService(JCATransportInboundOperationBindingServiceImpl.java:325)
at com.bea.wli.sb.transports.jca.JCATransportEndpoint.activateJCABindingService(JCATransportEndpoint.java:122)
at com.bea.wli.sb.transports.jca.JCATransportProvider.activationComplete(JCATransportProvider.java:507)
at sun.reflect.GeneratedMethodAccessor270.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at com.bea.wli.sb.transports.Util$1.invoke(Util.java:83)
at $Proxy134.activationComplete(Unknown Source)
at com.bea.wli.sb.transports.ResourceLifecycleListenerImpl$EndPointOperationCommon.activationComplete(ResourceLifecycleListenerImpl.java:748)
at com.bea.wli.sb.transports.ResourceLifecycleListenerImpl.activationComplete(ResourceLifecycleListenerImpl.java:336)
at com.bea.wli.sb.transports.ResourceLifecycleListenerImpl.changesCommitted(ResourceLifecycleListenerImpl.java:153)
at com.bea.wli.sb.transports.TransportManagerImpl.changesCommitted(TransportManagerImpl.java:1205)
at com.bea.wli.sb.service.ServiceChangeListener.changesCommitted(ServiceChangeListener.java:146)
at com.bea.wli.config.impl.ResourceListenerNotifier.afterEnd(ResourceListenerNotifier.java:120)
at com.bea.wli.config.transaction.TransactionListenerWrapper.afterEnd(TransactionListenerWrapper.java:90)
at com.bea.wli.config.transaction.TransactionManager.notifyAfterEnd(TransactionManager.java:1154)
at com.bea.wli.config.transaction.TransactionManager.commit(TransactionManager.java:1519)
at com.bea.wli.config.transaction.TransactionManager._endTransaction(TransactionManager.java:842)
at com.bea.wli.config.transaction.TransactionManager.endTransaction(TransactionManager.java:783)
at com.bea.wli.config.deployment.server.ServerDeploymentReceiver$2.run(ServerDeploymentReceiver.java:275)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
at com.bea.wli.config.deployment.server.ServerDeploymentReceiver.commit(ServerDeploymentReceiver.java:260)
at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer.doCommitCallback(DeploymentReceiverCallbackDeliverer.java:195)
at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer.access$100(DeploymentReceiverCallbackDeliverer.java:13)
at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer$2.run(DeploymentReceiverCallbackDeliverer.java:68)
at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:528)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
Caused By: java.lang.NullPointerException
at com.iwaysoftware.afjca15.IWAFOracleResourceAdapter.endpointActivation(IWAFOracleResourceAdapter.java:266)
at oracle.tip.adapter.sa.impl.fw.jca.AdapterFrameworkImpl.endpointActivation(AdapterFrameworkImpl.java:498)
at oracle.tip.adapter.sa.impl.inbound.JCABindingActivationAgent.activateEndpoint(JCABindingActivationAgent.java:325)
at oracle.tip.adapter.sa.impl.JCABindingServiceImpl.activate(JCABindingServiceImpl.java:113)
at com.bea.wli.sb.transports.jca.binding.JCATransportInboundOperationBindingServiceImpl.activateService(JCATransportInboundOperationBindingServiceImpl.java:325)
at com.bea.wli.sb.transports.jca.JCATransportEndpoint.activateJCABindingService(JCATransportEndpoint.java:122)
at com.bea.wli.sb.transports.jca.JCATransportProvider.activationComplete(JCATransportProvider.java:507)
at sun.reflect.GeneratedMethodAccessor270.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at com.bea.wli.sb.transports.Util$1.invoke(Util.java:83)
at $Proxy134.activationComplete(Unknown Source)
at com.bea.wli.sb.transports.ResourceLifecycleListenerImpl$EndPointOperationCommon.activationComplete(ResourceLifecycleListenerImpl.java:748)
at com.bea.wli.sb.transports.ResourceLifecycleListenerImpl.activationComplete(ResourceLifecycleListenerImpl.java:336)
at com.bea.wli.sb.transports.ResourceLifecycleListenerImpl.changesCommitted(ResourceLifecycleListenerImpl.java:153)
at com.bea.wli.sb.transports.TransportManagerImpl.changesCommitted(TransportManagerImpl.java:1205)
at com.bea.wli.sb.service.ServiceChangeListener.changesCommitted(ServiceChangeListener.java:146)
at com.bea.wli.config.impl.ResourceListenerNotifier.afterEnd(ResourceListenerNotifier.java:120)
at com.bea.wli.config.transaction.TransactionListenerWrapper.afterEnd(TransactionListenerWrapper.java:90)
at com.bea.wli.config.transaction.TransactionManager.notifyAfterEnd(TransactionManager.java:1154)
at com.bea.wli.config.transaction.TransactionManager.commit(TransactionManager.java:1519)
at com.bea.wli.config.transaction.TransactionManager._endTransaction(TransactionManager.java:842)
at com.bea.wli.config.transaction.TransactionManager.endTransaction(TransactionManager.java:783)
at com.bea.wli.config.deployment.server.ServerDeploymentReceiver$2.run(ServerDeploymentReceiver.java:275)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
at com.bea.wli.config.deployment.server.ServerDeploymentReceiver.commit(ServerDeploymentReceiver.java:260)
at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer.doCommitCallback(DeploymentReceiverCallbackDeliverer.java:195)
at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer.access$100(DeploymentReceiverCallbackDeliverer.java:13)
at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer$2.run(DeploymentReceiverCallbackDeliverer.java:68)
at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:528)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
>
####<Oct 29, 2010 5:43:05 PM PDT> <Info> <Monitoring> <camintd9> <osb_server_dev1> <[ACTIVE] ExecuteThread: '8' for queue: 'weblogic.kernel.Default (self-tuning)'> <deytel> <> <da0648933571bbbb:49aa3b48:12bfa0af692:-7fe4-0000000000000130> <1288399385668> <BEA-000000> <New Metadata version is 7660978571157877258>

Hello Julien,
As per the the DOC:http://download.oracle.com/docs/cd/E14571_01/doc.1111/e17059.pdf (look for section "1.3 Configuring Oracle Application Adapters in a High Availability Cluster
Environment for Oracle Service Bus")
We should deploy the adapter to both the cluster and the admin server.
So we can say that targeting iwafjca.rar to admin server (in addition to all cluster nodes) is the correct way to deploy SAP Adapter.
HTH,
DM

Strange problem when activate data for ODS

Hi experts,
I work as BI 7.0. I have one ODS called Sales Order Line, some fields is not exist in Datasources but they need to be filled data in this ODS. I used endroutine to filled these fields with data take from another ODS (Sales Order Header). After executing DTP I check new data table, these fileds are filled as I want, but the problem is: after activate data, these fileds are empty. very strange. Anyone, pls tell me the reason and how to fix it. 10 point will be assign for good answer.

Check if activation is successfull...try to check the table if you see these figures here...this is active table...
/BI0/A"ODS NAME"00
also the active table has data record in aggregated form, so one case may be you already have data with reverse sign for these fields for a particular key combination and now you have loaded with different sign so both got cancelled...
Thanks
Tripple k

How do i deactivate a device through icloud if the device is broken and i am unable to turn on find my iphone? Also i do not own a apple id as ive been using a family members due to problems when trying to make one?

How do i deactivate a device through icloud if the device is broken and i am unable to turn on find my iphone? Also i do not own a apple id as ive been using a family members due to problems when trying to make one?

Hey tyjox,
Thanks for the question. After reviewing your post, it sounds like you need to deactivate Find My iPhone on a device that does not work. You will need to work with the family member of the account the iPhone is registered with. I would recommend that you use this article to help you resolve or isolate the issue.
iCloud: Remove your device from Find My iPhone
http://support.apple.com/kb/PH2702
Remove an iOS device you no longer have
If you no longer have the iOS device because you gave it away or sold it, you need to remotely erase it before you can remove it.
Sign in to icloud.com/#find with your Apple ID (the one you use with iCloud).If you’re using another iCloud app, click the app’s name at the top of the iCloud.com window, then click Find My iPhone.
Click All Devices, then select the device.
Click Erase [device], then enter your Apple ID password. Because the device isn’t lost, don’t enter a phone number or message.If the device is offline, the remote erase begins the next time it’s online. You’ll receive an email when the device is erased.
When the device is erased, click Remove from Account.All your content is erased and someone else can now activate the device.
Thanks for using Apple Support Communities.
Have a nice day,
Mario

Problem when activating FaceTime on IPhone 5

There is a problem when trying to activate FaceTime on IPhone 5 with IOS 6.0.2.
When I try to add my icloud email address in Settings > FaceTime > Use your Apple ID for FaceTime and enter my email, a get a message that the username or the password is incorrect and to try again.
Any help please?

Make sure in "general - accessability - reduce motion" is set to OFF

I am unable to view google ads running alongside and under videos on YouTube. This is only a problem when I use Firefox. If I use another browser, I can see the ads. I do not have adlock as it does not appear in my plug-ins/add ons. Please help..

I have been using Firefox for about two years. For about a month now I have been unable to view any Google advertisements that run on YouTube pages alongside and under videos. This is important for my business. I would like to stay with Firefox, but this is only a problem when I use Firefox and is not a problem with Internet Explorer or Google Chrome as I checked. I tried uninstalling Firefox and all plugs ins and add ons and then reinstalling it. This did not work. Firefox seems to be blocking the Google codes that enable the ads to run on the pages. I look forward to your help. Thank you.

CS2 is very old and reached its "end of life" a while back. So probably won't run on modern operating systems. If you can still run it, you'll need to uninstall what you have and re-install with the download link below to activate it.
Error: Activation Server Unavailable | CS2, Acrobat 7, Audition 3
Nancy O.

Error when activate analytic view (join tables)-Exception during activation

Dear guru,
I suffered an error showed "Exception during activation" when activate a newly created analytic view.
I used two tables, one is NASDAQDAILY, one is NYSEDAILY.
Private attribute are "DATE, STOCK(NYSE.STOCK), STOCK_1(NASDAQ.STOCK"
Measure are "PRICEOPEN(NYSE), PRICEOPEN_1(NASDAQ)"
JOINS are: Left Table-NASDAQ, Left Column-DATE
Right Table-NYSE, Right Column-DATE
Validate is sucessfully.
But when "Save and Activate", it gave below error.
Kindly help me on this. Thank you so much.
com.sap.ndb.studio.sdk.resource.deployment.bi.DeploymentException: Error during deployment
_     at com.sap.ndb.studio.sdk.resource.deployment.bi.cv.CubeElement.processMeasures(CubeElement.java:591)_
_     at com.sap.ndb.studio.sdk.resource.deployment.bi.cv.CubeElement.initialize(CubeElement.java:170)_
_     at com.sap.ndb.studio.sdk.resource.deployment.bi.cv.CubeSchemaRoot.initialize(CubeSchemaRoot.java:80)_
_     at com.sap.ndb.studio.sdk.resource.deployment.bi.DeploymentExecutor.initialize(DeploymentExecutor.java:159)_
_     at com.sap.ndb.studio.sdk.resource.deployment.bi.CubeDimensionDeploymentExecutor.initialize(CubeDimensionDeploymentExecutor.java:78)_
_     at com.sap.ndb.studio.sdk.resource.bi.core.impl.BiResourceImpl.activateObjects(BiResourceImpl.java:236)_
_     at com.sap.ndb.studio.sdk.resource.repository.core.impl.ResourceImpl.activateObjects(ResourceImpl.java:868)_
_     at com.sap.ndb.studio.sdk.resource.repository.core.impl.ResourceImpl.activate(ResourceImpl.java:727)_
_     at com.sap.ndb.studio.sdk.resource.repository.core.impl.ResourceManager.activateAll(ResourceManager.java:166)_
_     at com.sap.ndb.studio.sdk.resource.repository.core.impl.ResourceManager.activateAll(ResourceManager.java:202)_
_     at com.sap.ndb.studio.modeler.job.type.activate.ActivateJob.activateObjects(ActivateJob.java:92)_
_     at com.sap.ndb.studio.modeler.job.type.activate.ActivateJob.run(ActivateJob.java:71)_
_     at org.eclipse.core.internal.jobs.Worker.run(Worker.java:54)_

Hello,
This issue is resolved now.
The problem was with the file system space on the Unix server(on which portal is installed).
The server administrators and the Basis team extended the disk space and issue got resolved.
Thanks for all your inputs.
Sonali.

Problem when activating Query from Business Content

Hi Gurus,
I'm currently encountering problems when activating a query (Financial Statement and P&L: Actual/Actual Comparison) in the business content under these 2 cubes (0FIGL_VC1 and 0FIGL_VC2). Since I was told that these cubes are Virtual Cubes I also have already activated Basis Cubes (0FIGL_C01 and 0FIGL_C02) as a prerequisite of the 2 Virtual Cubes. I have also loaded the data for the 2 cubes and have encountered no problem at all.
But while activating the said Query (Financial Statement and P&L: Actual/Actual Comparison). I have encountered a problem during activation and only this error message appears 1. Error when activating element DO9NE34DKNREWIBWNVAW8BS7M (Technical Name of the Query) and 2. BEx transport request '' is not available or not suitable.
What other possible steps am I missing here?Is there anything else I should do or activate before activating the Query. Thank you again for all the help.
- Kit

Hi Kristian,
Do the following ->
Goto transaction RSA1 -> Transport Connection -> Edit -> Transport -> Switch On Standard.
After this try activating your Query again.
Hope this helps!
Regards,
Saurabh

Problem when transporting data model

Hi,
I currently have a problem when I send my transport to Q/A. I cann see the info objects that I am sending. I have replicated and refresehd the tree but no info objects are shown. I have created the transport by including the info object catalogs in process before. Does anybody have any ideas?
thanks.

Hi,
This is the message I get back from the transports:
   Activate inactive runtime objects        25.04.2008 16:09:44    (0) Successfully Completed
   Activate inactive runtime objects        25.04.2008 16:19:36    (0) Successfully Completed
   Activate inactive runtime objects        25.04.2008 16:21:28    (0) Successfully Complet
So you think I should transport the info object first , and then the catalogs. What i've noticed is that when I check my data sources for my source system, the proper characteristics cannot be found and my transfer rules cannot automatically be activated.
Let me know what you think.
thanks

Problems when starting OC4J J2EE 10.1.3 standalone container

Hi,
For month's now my OC4J standalone container functioned without any problems..
Suddenly, it does not start anymore and I'm getting the following error:
Starting OC4J from c:\oracle\oc4j_1013\j2ee\home ...
2006-07-19 21:45:23.046 ERROR Failed to set the internal configuration of the OC
4J JMS Server with: XMLJMSServerConfig[file:/C:/oracle/oc4j_1013/j2ee/home/confi
g/jms.xml]
06/07/19 21:45:23 *** (SEVERE) Failed to set the internal configuration of the O
C4J JMS Server with: XMLJMSServerConfig[file:/C:/oracle/oc4j_1013/j2ee/home/conf
ig/jms.xml]
2006-07-19 21:45:23.062 ERROR J2EE OJR0011 Exception starting JMS server: Failed
to set the internal configuration of the OC4J JMS Server with: XMLJMSServerConf
ig[file:/C:/oracle/oc4j_1013/j2ee/home/config/jms.xml]
2006-07-19 21:45:25.171 WARNING J2EE JNDI0001 Resource Environment reference jms
/store not found. Allowing J2EEContext creation to continue anyway.
2006-07-19 21:45:25.171 WARNING J2EE JNDI0001 Resource Environment reference jms
/eventQueue not found. Allowing J2EEContext creation to continue anyway.
2006-07-19 21:45:25.171 WARNING J2EE JNDI0001 Resource Environment reference jms
/notificationQueue not found. Allowing J2EEContext creation to continue anyway.
2006-07-19 21:45:25.218 WARNING J2EE JNDI0001 Resource Environment reference jms
/eventQueue not found. Allowing J2EEContext creation to continue anyway.
2006-07-19 21:45:25.218 WARNING J2EE JNDI0001 Resource Environment reference jms
/notificationQueue not found. Allowing J2EEContext creation to continue anyway.
2006-07-19 21:45:25.218 ERROR J2EE EJB3027 [default] An error occured deploying
EJB module: java.lang.InstantiationException: Resource exception(OracleASjms) fo
r MessageDrivenBean event during endpoint activation: failure looking up Connect
ionFactoryJndiName:jms/XAQueueConnectionFactory: javax.resource.spi.ResourceAdap
terInternalException: Looking up jms/XAQueueConnectionFactory: javax.naming.Name
NotFoundException: jms/XAQueueConnectionFactory not found
06/07/19 21:45:25 WARNING: Application.setConfig Application: default is in fail
ed state as initialization failedjava.lang.InstantiationException: Error initial
izing ejb-modules: Resource exception(OracleASjms) for MessageDrivenBean event d
uring endpoint activation: failure looking up ConnectionFactoryJndiName:jms/XAQu
eueConnectionFactory: javax.resource.spi.ResourceAdapterInternalException: Looki
ng up jms/XAQueueConnectionFactory: javax.naming.NameNotFoundException: jms/XAQu
eueConnectionFactory not found
Jul 19, 2006 9:45:25 PM com.evermind.server.Application setConfig
WARNING: Application: default is in failed state as initialization failedjava.la
ng.InstantiationException: Error initializing ejb-modules: Resource exception(Or
acleASjms) for MessageDrivenBean event during endpoint activation: failure looki
ng up ConnectionFactoryJndiName:jms/XAQueueConnectionFactory: javax.resource.spi
.ResourceAdapterInternalException: Looking up jms/XAQueueConnectionFactory: java
x.naming.NameNotFoundException: jms/XAQueueConnectionFactory not found
2006-07-19 21:45:25.250 WARNING DEBUG GJRA-1100, oracle.j2ee.connector.messagein
flow.MessageEndpointFactoryImpl@159d450.
06/07/19 21:45:25 Error initializing server: Error initializing ejb-modules: Res
ource exception(OracleASjms) for MessageDrivenBean event during endpoint activat
ion: failure looking up ConnectionFactoryJndiName:jms/XAQueueConnectionFactory:
javax.resource.spi.ResourceAdapterInternalException: Looking up jms/XAQueueConne
ctionFactory: javax.naming.NameNotFoundException: jms/XAQueueConnectionFactory n
ot found
2006-07-19 21:45:26.093 WARNING J2EE JTA RecoveryManager is null during shut
down
06/07/19 21:45:26 Fatal error: server exiting
The version of the OC4J J2EE container is:
Oracle Containers for J2EE 10g (10.1.3.0.0) (build 060119.1546.05277)
Does anyone has any suggestions why this error happens, I did not changes anything in my installation and also did not deploy any new apps
Thanks for your help

I still have this problem when I try to login to the EM:
This OC4J is configured to make JMX connections via RMIS and fall back to RMI if the RMIS port is not configured. The RMIS connection on the OC4J instance home on Application Server assoa.locahost is configured but a connection could not be established. The JMX protocol is specified by the oracle.oc4j.jmx.internal.connection.protocol property in opmn.xml
Can you help me here?

I can't turn off find my ihone, always show "there was a problem when canceling the registration of this iphone with icloud" please help me. i can't restore my iphone before turn off find my iphone

i can't turn off find my ihone, always show "there was a problem when canceling the registration of this iphone with icloud" please help me. i can't restore my iphone before turn off find my iphone

If you are the original owner of the phone and know the Apple ID and password that were used to activate it originally, and if you have an existing backup to restore from, you can force it into recovery mode (which will completely erase it) and restore it as explained here: If you can't update or restore your iPhone, iPad, or iPod touch - Apple Support. When you do you will encounter activation lock, and will have to provide the ID and password used to activate it originally in order to activate it again. If you can't, you won't be able to activate and use it.

I have problems to activate imessage and facetime on my iphone

i have problems to activate imessage and facetime on my iphone, it doesnt work with my phone number, only with icloud and when somebody tries to contact me on facetime, it show them that im not connected, please help!

Have you tried restarting the phone? Hold both Home and Power buttons down until Apple logo appears and phone "reboots".
And have you tried resetting Network Settings?
Settings => General => Reset => Reset Network Settings
You will have to re-enter Wifi Passwords but it might help you get to a more solid connection on your phone.

Problem when loading from ODS to the CUBE

Hi Experts,
I am facing an unusual problem when loading data from ODS to the cube.
I have a first level ODS where the delta postings are updated. I have checked the active table of the ODS and the data is accurate.
I have deleted the entire data from the Cube and trying to do a full load from ODS to the CUBE.
I am sure when I run a full load the data goes from Active table of the ODS.
After the full load the the keyfigure values are 0. I have tried doing the testing by loading couple of sales documents and still the keyfigure values are 0.
I wonder when I load the full. The data should be picked exactly the way it is in active table of the ODS.
I also dont have any fancy routines in the update rules.
Please help me in this regard.
Regards
Raghu

Hi,
Check the procedure did u do that exactly or not. just follow the the laymen steps here:... and let me know ur issue
o     First prepare a flat file in Microsoft excel sheet for master data and transaction data and save it in .CSV format and close it.
o     First select info objects option and create info area then create info object catalog then char, & key figure. Then create id in Char, Name as attribute activate it then in key figures create no and activate it.
o     In info sources create application component then create info source with direct update for master data and flexible update for transaction data. The flat files would be created for master data create info package and execute it.
o     For transaction data go to info provider then select the file right click on it then select option create ODS object. Then a new screen opens give the name of the ODS and create other screen opens then drag character to key fields.
o     Activate it then update rules it will give error to it then go to communication structure and give 0Record mode then activate it then go to update rules it will activate it.
o     Then go to info source then create info package then external data then processing update, Data targets then the scheduling then click start then the monitor.
o     Then other screen opens there we can see if we doesnt able to see the records then come back to the info provider right click on it then other screen opens then select the option activate data in ODS then a screen opens.
o     so select the option QM where it would be in a yellow co lour then by double click then another screen opens then select green color option then click continue it and it comes to the previous screen then select the option and click save it would be underneath of it just click it up and close it.
o     Then come back to the main screen to the info source to the info package go to the package and right click on it then a screen opens then click schedule without distributing any of the tab directly click the monitor tab. Then refresh it until the records come to the green.
o     Once it is green the click the data target and see the file executed.
o     Now go to the info provider then a right click on the file name then create info cube. Then a new screen opens and gives the name and activates it. The drag the key figures to the other side, time characteristics to the other side, and chacetristics to the other side.
o     Then create the dimension table then assign it and activate it .Then go to file name right click on it then select the option create update rules select ODS option and give the file name and activate it .
o     Then come back to the main screen and refresh it. Whenever you see 8 file names you will know that it is undergoing the data mart concept.
o     In the main screen click ODS file right click then a pop up screen opens select the option update ODS data target. Then another screen opens in that we are able to see 2 options full update, initial update then select initial update.
o     Then another screen opens info Package there the external data , data targets , scheduler select the option later in background option then a another screen opens just click immediate then click save automatically it closes then click start option.
o     Then select monitor option then the contents then the field to be elected then the file to be executed.
regards
ashwin

Problem when turn on mini Ipad.

I have problem when turn on mini ipad. I have to slice the unlock after it flashing 3 times and not after flashing5 times!!
After the unlock flashing 5 times it will turn off the screen and I have to push any button on my ipad mini to activate the screen to turn on again every time!
Do I have to set something in setting to avoid this situation? It's boring to count the flashing of the unlock 3 times to slice it!!!
My iOS version is already updated but the problem still as the same since I got it on December 2012

Not normal. Take it to an Apple Store for evaluation.
Make a Genius Bar Reservation
http://www.apple.com/retail/geniusbar/
Try this - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
 Cheers, Tom

I have a problem when iTunes card insert the card number comes message the code you entered has not been properly activated

I have a problem when iTunes card insert the card number comes message the code you entered has not been properly activated

Is the store that you bought it from close so that you could try going back to them and ask them to activate the card properly ? If not then try contacting iTunes Support (you will probably need to give them images of the front and back of the card, and possibly its receipt) : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then iTunes Cards And Codes

BGP Problems when activate 1-100GbE linecard

Similar Messages

Maybe you are looking for