BGP4 Session Goes Down receiving FULL Routers from providers
BGP4 Session Goes Down receiving FULL Routers from providers
CONF
router bgp 22999
no synchronization
bgp log-neighbor-changes
bgp maxas-limit 254
network 196.12.173.0
aggregate-address 196.12.173.0 255.255.255.0 summary-only
neighbor 64.247.171.17 remote-as 11992
neighbor 64.247.171.17 version 4
neighbor 64.247.171.17 soft-reconfiguration inbound
neighbor 64.247.171.17 distribute-list ramallo_in in
neighbor 64.247.171.17 distribute-list ramallo_out out
neighbor 196.12.168.202 remote-as 11367
neighbor 196.12.168.202 ebgp-multihop 2
neighbor 196.12.168.202 version 4
neighbor 196.12.168.202 next-hop-self
neighbor 196.12.168.202 soft-reconfiguration inbound
neighbor 196.12.168.202 distribute-list ramallo_out out
SHOW VERSION
Router# show ver
Cisco IOS Software, C2900 Software (C2900-UNIVERSALK9-M), Version 15.0(1)M3, REL
EASE SOFTWARE (fc2)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2010 by Cisco Systems, Inc.
Compiled Sun 18-Jul-10 03:32 by prod_rel_team
ROM: System Bootstrap, Version 15.0(1r)M9, RELEASE SOFTWARE (fc1)
Router uptime is 1 week, 10 hours, 11 minutes
System returned to ROM by power-on
System image file is "flash0:c2900-universalk9-mz.SPA.150-1.M3.bin"
Last reload type: Normal Reload
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
If you require further assistance please contact us by sending email to
[email protected].
Cisco CISCO2911/K9 (revision 1.0) with 483328K/40960K bytes of memory.
Processor board ID FTX1445A1W4
3 Gigabit Ethernet interfaces
2 Serial interfaces
DRAM configuration is 64 bits wide with parity enabled.
255K bytes of non-volatile configuration memory.
250880K bytes of ATA System CompactFlash 0 (Read/Write)
SHOW LOG
*Sep 21 21:58:09.107: %BGP-3-NOTIFICATION: sent to neighbor 196.12.168.202 3/1 (
update malformed) 0 bytes
*Sep 21 21:58:09.107: %BGP-4-MSGDUMP: unsupported or mal-formatted message recei
ved from 196.12.168.202:
FFFF FFFF FFFF FFFF FFFF FFFF FFFF FFFF 00BB 0200 0000 2440 0101 0040 0216 0205
0000 2C67 0000 392E 0000 329C 0000 4BE5 0000 6D21 4003 04C4 0CA8 CA18 BE61 8B18
BE61 9818 BE61 9118 BE61 8F18 BE61 8318 BE61 9F18 BE61 9718 BE61 9618 BE61 9918
BE61 9E18 BE61 9C18 BE61 9B18 BE61 9D18 BE61 8C18 BE61 8118 BE61 9318 BE61 8E18
BE61 9418 BE61 9518 BE61 9A18 BE61 8218 BE61 8D18 BE61 9218 BE61 8918 BE61 8618
BE61 8518 BE61 8818 BE61 8A18 BE61 8718 BE61 8418 BE61 8018 BE61 90
*Sep 21 21:58:09.107: %BGP-4-BGP_OUT_OF_MEMORY: BGP resetting because of memory
exhaustion.
*Sep 21 21:58:19.895: %BGP-5-ADJCHANGE: neighbor 64.247.171.17 Down No memory
*Sep 21 21:58:19.895: %BGP_SESSION-5-ADJCHANGE: neighbor 64.247.171.17 IPv4 Unic
ast topology base removed from session No memory
*Sep 21 21:58:19.895: %BGP_SESSION-5-ADJCHANGE: neighbor 196.12.168.202 IPv4 Uni
cast topology base removed from session BGP Notification sent
*Sep 21 21:58:28.707: %BGP-5-ADJCHANGE: neighbor 64.247.171.17 Up
*Sep 21 21:58:31.267: %BGP-5-ADJCHANGE: neighbor 196.12.168.202 Up
*Sep 21 21:58:35.607: %SYS-5-CONFIG_I: Configured from console by vty0 (196.12.1
73.25)
*Sep 21 22:02:35.387: %SYS-2-MALLOCFAIL: Memory allocation of 65536 bytes failed
from 0x2342E9A8, alignment 0
Pool: Processor Free: 125144 Cause: Memory fragmentation
Alternate Pool: None Free: 0 Cause: No Alternate pool
-Process= "BGP Router", ipl= 0, pid= 239, -Traceback= 0x2340604Cz 0x23423490z
0x21AF2D38z 0x21AA5C80z 0x21AA5FB0z 0x21B63554z 0x21B63E58z 0x21AC7844z 0x21AC7D
04z 0x21AC83A8z
*Sep 21 22:02:35.387: %BGP-5-ADJCHANGE: neighbor 196.12.168.202 Down BGP Notific
ation sent
*Sep 21 22:02:35.387: %BGP-3-NOTIFICATION: sent to neighbor 196.12.168.202 3/1 (
update malformed) 0 bytes
*Sep 21 22:02:35.387: %BGP-4-MSGDUMP: unsupported or mal-formatted message recei
ved from 196.12.168.202:
FFFF FFFF FFFF FFFF FFFF FFFF FFFF FFFF 0061 0200 0000 3240 0101 0040 0216 0205
0000 2C67 0000 392E 0000 329C 0000 6D52 0000 1B89 4003 04C4 0CA8 CA40 0600 C007
0800 001B 89C8 3BC4 C618 C83D 1018 C83D 1A18 C83B 3C18 C829 D618 BA00 D417 BA00
D0
*Sep 21 22:02:35.387: %BGP-4-BGP_OUT_OF_MEMORY: BGP resetting because of memory
exhaustion.
*Sep 21 22:02:46.379: %BGP-5-ADJCHANGE: neighbor 64.247.171.17 Down No memory
*Sep 21 22:02:46.379: %BGP_SESSION-5-ADJCHANGE: neighbor 64.247.171.17 IPv4 Unic
ast topology base removed from session No memory
*Sep 21 22:02:46.379: %BGP_SESSION-5-ADJCHANGE: neighbor 196.12.168.202 IPv4 Uni
cast topology base removed from session BGP Notification sent
*Sep 21 22:03:00.319: %BGP-5-ADJCHANGE: neighbor 196.12.168.202 Up
*Sep 21 22:03:01.347: %BGP-5-ADJCHANGE: neighbor 64.247.171.17 Up
Router#
Any ideas?
I have CISCO ASR 1002-X with 4 GB Memory. i have the same problem
BGP Session goes down.
here is the log
*Feb 25 06:03:06.571: %BGP-4-BGP_OUT_OF_MEMORY: BGP resetting because of memory exhaustion.
*Feb 25 06:03:07.968: %COMMON_FIB-4-DISABLING: IPv4 CEF is being disabled due to a fatal error.
*Feb 25 06:03:10.107: %BGP-5-ADJCHANGE: neighbor X.X.X.X Down No memory
*Feb 25 06:03:10.107: %BGP_SESSION-5-ADJCHANGE: neighbor X.X.X.X IPv4 Unicast topology base removed from session No memory
*Feb 25 06:03:10.107: %BGP-5-ADJCHANGE: neighbor X.X.X.X Down No memory
*Feb 25 06:03:10.107: %BGP_SESSION-5-ADJCHANGE: neighbor X.X.X.X IPv4 Unicast topology base removed from session No memory
*Feb 25 06:03:10.107: %BGP-5-ADJCHANGE: neighbor X.X.X.X Down No memory
*Feb 25 06:03:10.107: %BGP_SESSION-5-ADJCHANGE: neighbor X.X.X.X IPv4 Unicast topology base removed from session No memory
*Feb 25 06:04:22.732: %FIB-2-FIBDOWN: CEF has been disabled due to a low memory condition. It can be re-enabled by configuring "ip cef [distributed]"
Similar Messages
-
Nokia 5530 xpress music: The volume goes down when...
Hi All
I hope all of you are fine
Nokia 5530 xpress music: when I play the music without Nokia headset the volume seems great but when I play the same song with headset the volume goes down.
is the problem from Nokia Headset or from the mobile itself?
Thanks in advanceI think this is Normal.
Otherwise It wouldn't do your hearing much good if you set the volume to maximum and then plugged in your headset
If this Post is helpful. A click on the White Kudos star is always Appreciated
Last Nokia: Nokia Lumia 800
Current Phone: A Non Nokia Device
Previous Phones:Don't Ask ;-) -
Listeners are going down frequently..
Hi,
I have two node cluster databases.in that cluster 5 databases are running. We have configuared 2 listeners for each database and registered in OCR.But frequently some listeners are going down or UNKNOWN state from first node only. everything is running fine from second node. How to troubleshoot this?
Thanks in advanceuser2017273 wrote:
I have two node cluster databases.in that cluster 5 databases are running. We have configuared 2 listeners for each database and registered in OCR.As I understand, you are running 5 RAC databases on the same cluster (meaning 5 RAC instances per node), with each instance having 2 listeners, resulting in 10 listeners per node?
What on earth for? Why? What problem/issue are you trying to address that way?
But frequently some listeners are going down or UNKNOWN state from first node only. everything is running fine from second node. How to troubleshoot this? RAC is only as robust as
a) the architecture it is implemented on (server h/w, Interconnect, etc)
b) how well it adheres to Oracle concepts and fundamentals
5 RAC instances on the same 2 nodes, using 10 listeners per node? That is anything but adhering to Oracle fundamentals. More like total madness IMO.
Cannot recall ever having a listener (stand-alone or on any of our RACs) simply going down and not working as designed. So I doubt strongly that your are dealing with an Oracle issue here. Seems to be a case of an unnecessary self inflicted wound. -
I have spent hours on the phone with Apple and AT&T. I went thought reset, on/off, etc, etc with both companies to no avail. Each company pointed fingers at the other....as being the source of the problem.
Problems: Suddenly ALL incoming calls were going directly to VM with no signal I missed calls and/or had VM. I was also unable to receive all Text Messages...Oddly, I could send text messages to anyone (even non-apple users but I could not receive their responses)........then I when I got home I started receiving text messages from other apples users ONLY. I assume now - iMessage kicked in and I could text (send/receive) other iPhone/iPad/iTouch users ONLY. ....yes, I could still (send) text messages to my husband's blackberry (he received my messages fine) but my phone would NOT receive his text respones.
Finally, I googled the problem and found this community where other people have had the exact same problems! One person said he "turned off 3 G" which was the solution for him....so I did the same and VIOLA! My problem solved! Nevermind the fact that I pay for 3G and cannot use it....so here's my question, if 3G is the problem on my phone is this an APPLE issue or a NETWORK problem? Do I purchase a new phone and slip in my same SIM card and hope the same does not occur or do I get a whole new SIM card and phone? What is the long term resolution to this problem?
I am happy however to find that my problem is NOT an isolated incident and wish Apple or AT&T had told me this is not so uncommon because I thought (based on the baffled response from Apple) that this has never occurred before. Where is Steve Jobs when we need him?jsavage9621,
It pains me to hear about your experience with the Home Phone Connect. This device usually works seamlessly and is a great alternative to a landline phone. It sounds like we've done our fair share of work on your account here. I'm going to go ahead and send you a Private Message so that we can access your account and review any open tickets for you. I look forward to speaking with you.
TrevorC_VZW
Follow us on Twitter @VZWSupport -
I recently rented a movie using Apple TV and it said it was going to take 7-14 hours to download so I let it run. I also received a message from apple telling me that there was a request for this movie and they took the funds. But when I tried to find it on my purchases it was not there and when I went back to that movie it was asking me to purchase it again is this common and how do I get it back.
Not sure what happend there. But ATV only streams, no HD so if you leave it too long, the whole download gets lost.
Check with iTS.
iTunes Store Support
http://www.apple.com/emea/support/itunes/contact.html -
What happens to client session when host goes down?
I have a windows 2012 R2 RDP environment. 1 Broker and 3 Session Host Servers.
My question is as follows:
User connects via broker to one of the Host servers. Host server goes down, while user is still connected. Session is written in Broker database. User wants to connect again, but broker sends him on to the server which is down and so he cannot connect.
Other situation is similar, User connects to host, administrator drains host, stopping new connections. User disconnects session, session is still in Broker, when user tries to reconnect is sent to drained server but cannot login, as he is considered new
connection.
What am I missing?
AaronHi Aaron,
Thank you for posting in Windows Server Forum.
We need to configure RDSH in a load balance farm where it can be managed by RD Connection Broker. For that we need to use DNS RR where need to make entry for all RDSH server which will be handled by RDCB Server or we can use any load balancing method to load
balance the different RDSH server and thus that connection will allow the disconnected session for reconnection and can identify the connection.
The RD Connection Broker for RDS serves the following main purposes:
• Determining the best RD Session Host server to connect to - this is based on the amount of current sessions per RD Session Host Server as a form of load balancing.
• Reconnecting a user to an existing session, in case there is one - this is called reconnecting to disconnected sessions.
• Being a resource for RD Web Access to deliver information about what Remote Apps are available on RD Session Host Servers that are a member of the broker.
More information.
Remote Desktop Server farms explained (Part 1
& Part 2) (Link is for Server 2008 R2 but it’s only for reference).
Step by Step Windows 2012 R2 Remote Desktop Services – Part 3 (For Server 2012 R2)
Hope it helps!
Thanks.
Dharmesh Solanki -
This is going to sound really ridiculous but, what is an "interactive" PDF?
I received a PDF from an organization which stated it was furnishing an "interactive PDF" but on which I am not even able to highlight or make comments.Well turned out it is secured, but if you can't even highlight points, can you still refer to it as "interactive?"
The problem was that they furnished both a book and a PDF file which are identical and I am unable to understand the point. I would refer to the PDF as "flat" or "static" rather than "interactive." It seems redundant and I find the description misleading. It's also remarkably wasteful.
(Also, visualize the levels of efficiency between 1) scrolling through a PDF, highlighting certain points, and keyboarding comments vs 2) turning pages in a book, picking up a pen to highlight areas, and getting out the pen and paper to handwrite comments.)
Thanks so much for taking the time. -
My messages are not going through or coming in from other iOS devices. Having to send and receive in SMS. What is up? Anyone else having these issues?
There's an article that Apple has acknowledged this issue. They recommend turning off imessages, reset all settings and then reactivate imessages.
If that doesn't work, you may just have to wait until they release an update, which should be pretty soon. -
i just received my macbook from the apple store and can't get the track pad to swipe at all it will scroll up and down but no other features work!! all works on the magic mouse though!!
any help would be greatly appreciated>Preference>Trackpad.
-
I received an email from apple stating my icloud storage was almost full. I deleted apps and photos and the storage has not changed, so what am I supposed to do?
... I clicked on it (I know I am not supposed to do this - I won't ever do it again) and no window opened up.
You're right - it is never a good idea to click on links sent in an email unless you are absolutely certain they are legitimate, and that is only becoming more difficult as spammers and phishing attempts are getting better every day. Having no association with Verizon is all the more reason to simply delete the thing.
Next, by supplying your email address all you did was confirm to whatever site was sending you this spam that your email address was legitimate. Again, when in doubt just delete the email and forget you ever saw it.
... How can I check to see if my computer has been hacked and how can I protect it further.
The good news is that is highly unlikely. The bad news is that your email address might be used as the "from" address for spam sent to others, and that you are only more likely to get more spam from the phony Verizon site as well as every other potentially malicious operators.
The best advice would be to simply abandon that email address, but if you can live with the previous potential concerns it would be overkill. I would recommend changing your passwords for financial institutions (banks, credit cards and so forth) as well as your email account or accounts. That is simply good practice whether or not you did what you did.
As far as any malware is concerned, again that is unlikely, but make sure you run Software Update to get all Apple's latest updates. -
I just received an email from icloud stating that my free upgrade was going to expire and it would decrease to 5 (when I have been using 10+). What is this??
The actual amount of extra free storage varies depending on how much storage previous subscribers had.
If you do nothing your storage will dowgrade to 5GB so you should make sure you don't have more content than this.
If you want to continue with the increased storage by paying for it, please see
http://support.apple.com/kb/HT5527
and expand 'How do I purchase my current plan?'. -
Received an email from iCloud telling me my storage is full ,when i go to storage
Received an email from icloud telling me that my storage is full, when i go to storage on my iphone it tells me i have 4.4 GB available, what next???
Does it say disabled for security reasons or just disabled? If it just says disabled, go to the iTunes billing team's support site and email off the error, include your billing address for the account and the last 4 digits of your credit card and they will fix it up within 24-48 hours.
http://apple.com/support/itunes/contact.html -
I'm having some problems with my ipad and charging it. I am having to leave it in charge for a lot longer, but when I take it out and want to use it the battery is still not completely full and goes down a lot faster than usual. The other day, I had charged my iPad overnight so that I could take it to university with me for the day, and when I had switched it on the next day the battery was on 5% and I had not used it since charge.
Your battery may be dying. THey are only good for so many charges/discharges. If you have an apple store near by make an appointment and have them check itout
-
When i use the AE2 as an extra wifi point and put the plug in from Time Capsule than the total networks goes down. what do I wrong?
When i use the AE2 as an extra wifi point and put the plug in from Time Capsule than the total networks goes down. what do I wrong?
You likely first configured the AirPort Express to "extend a wireless network" using wireless only, correct?
If yes, you cannot then connect the AirPort Express using Ethernet....that will crash your network.
The Express must be configured to "create a wireless network". AirPort Utility will do this for you automatically, but you will first need to perform a Factory Default Reset or Hard Reset on the AirPort Express and then start over with the configuration again.
Connect the Ethernet cable to the Express before you open AirPort Utility. Post back if you need more tips on how to set this up. -
I CAN NOT RECEIVE TEXT MESSAGES FROM PEOPLE USING IMESSAGE
On an iPhone your iMessages will go to your phone number.
You can select another email to use on iPod or iPad.
Go to settings
Messages
Send and receive
Check your phone number and uncheck the common Apple ID you share so your messages will not go to other devices.
Maybe you are looking for
-
Can anyone help me connect my Macbook Air to a SAMSUNG TV. When I follow the basic instructions (Thunderbolt to HDMI connection) the screen on my computer goes grey and an error message appears inviting me to press any button to restart the Macbook.
-
My apologies if this question is in the wrong forum. Couldn't find a form category for IDE issues. When I edit the code of one particular project, I do not get the wriggly lines when I type an error. I must have switched off something. When I load
-
Hello All, I created a URL iView and I can preview it successfully. However, upon embedding the URL iView in a page and previewing the page, I get a blank container/iView. Any ideas on why this happens and how it can be fixed? Regards, Motaz
-
BAPI_OBJCL_CHANGE to change characteristic
Hello All, I am writing a program to collect materials for a specified criteria and for those materials change the characteristic values for a class. I would like to change the characteristic for the class using the following code. but this is not s
-
Recovery email is wrong and so are passswords
I have an ipod touch, and in order for me to purchace any music or app I have to agree to some new terms of service or something like that. I have to go to the apple id page where it asks me my security questions, one of them I don't know the answer