BH 105 working or not working

i just bought a BH 105 bluetooth headset yesterday and it was working fine.. today i connected with it again with my N70 and it gives the confirmation beep of connecting. but when i tried calling or listening to music it is not working.. is there something i can do for it to work or it is already broken and just needed to be replaced?

Hi All,
I would request any one of you to please help in solving this issues with my blue tooth headset. The headset is not charging, and flashing red light continuously while i tried to connect with charger. If i remove the headset form charger it is not switching on.
Regards
Nags

Similar Messages

ALC-TTN-105-000 could not connect to bootstrap servlet

hi i am trying to install livecycle server using Adobe LiveCycle Configuration Manager on windows 7.in this i reached to a slide heading is LifeCycle ES3 Database initialization there is a button labeled as initializa and two text field in host text field i entered localhost and in port i entered 8080 and getting error
ALC-TTN-105-000 could not connect to bootstrap servlet.Port[Connection refused:connect] may be invalid .
i tried other ports also 8081 8085 9090 etc but still facing the same error .can any one please tell how to resolve this error??please help i am a beginner and i am very excited to create my first app please help how to proceed further and resolve this issue!!

sorry, the discription was not clear. I would like to replenish this. This scene was to initialize the LiveCycle ES2 database and with the host: localhost and the HTTP port: 8080
And I tried to start the jboss and found out, there is no directory of the jboss under /opt/jboss.
thanks

Satellite P855-105 - 3D is not working

Problem with a brandnew Satelite P855-105 with the glasses Free 3D Display:
Brandnew unit - Factory installed. Even playing of one of the 3 3D Videos preloaded from Toshiba does not workt. The Toshiba Player start's but it displays 2 pictures side by side (same on all 3 Videos) Pressing the 3D button help's for 1 secound - ! Secound the picture is correct and then it falls back to even for samll pictures!
Beside this, Playing of any 3D DVD does not work - it plays always in 2D or in th econfiguration of 2 Pictures side by side... (I'm useing th epreloaded Toshiba Blue Ray disk player).
3D Function is correctly enabled in the Nvidia driver. Insatllation is still ex factory.
Need help to use the 3D function.
Thanks!

Check that you're using the latest OS version released (upto-date OS) and make sure your Blu-Ray drive has the correct f/w... every once in awhile a piece of hardware slips through the cracks and doesn't get its required f/w update to handle new features... if all is well software wise and all version/rev. No's jive, you may have a problem in either
A; The Blu-Ray Optics and or Encoder/Decoder are bad and the drive is scrap,
or
B; The Display's 3D Optics sensor and or the Display Panel itself are scrap...theres no fixing a defective panel and its not a cost effective solution for anyone to change the panel short of warantee.
or
C; The graphics adapter is scrap, some are interchangeable and socketed, some are not, depends on the hardware matrix and rev. of your mainboard.
Connect your PC to a 3D-TV with the HDMI output and see if the machine outputs 3D to the outboard display... this will help diagnose the problem and remove suspect devices from question. If it outputs 3D, your panel is bad, if it doesn't, your panel is good, and now you need to start walking backward through the hardware to see where the problem one lies.
**Dont forget, windoze is great at fukking up software FAST, your problem might be a stupid little registry keying issue.
Unfortunatley you're dealing with a problem that has potentially thousands of causes, none necessarily liked to another. it could be simply a software conflict in the machine brought on by a user installed driver or software suite that just won't work properly with another in the system.

Re: Qosmio X770-105 - camera is not working with Skype

Hey,
I've just got Qosmio x770-105 and while setting up Skype the camera just stayed black and never showed any image. While using the Toshiba Web Camera Application it is working on Skype it just has stays black.
Do you have any suggestions on how to fix that ?
Thanks Than

Well, you could try to remove the Toshiba Webcam Application from the system and could try to use just the Skype tool but this is just a suggestion not quite sure what cause this issue
It looks really like broken Skype utility have googled around and it looks like more Skype users have the same problem using different computers and different webcamsunfortunately did not find a exact solution proposal

Infotype 105 and 0006 not transferred through ALE

Hi all,
I am sending organisation data (infotype 1000, 1001, 1002, 1003, 1008) & personal data (infotype 0000, 0001, 0002, 0006, 0105) from one SAP system ( ECC 5 ) to another ( ECC 6 ). using ALE and i used message type HRMD_A and idoc type is HRMD_A06 , in that process all my infotype data in moving properly except infotype 0006 and 0105. i am getting IDOC status 52 ( Application document not fully posted) in receiving system. both the infotype (0006,0105) has subtype & i have included respective subtype in distributed model.
can any one tell what could be reason. pleasae help
Thanks,
Madhu

solved by own.

Clob is not working for bulk data files in PL/SQL XML program

Hi Odie,
we took your help to fix the our issue before
"https://forums.oracle.com/forums/thread.jspa?threadID=2238458&tstart=105"
working fine for : program is working for smaller size data.
Issue : now we have problem with the largr size data .
getting the below error:
Arguments
P_dir_name='/tmp'
P_file_name='CCBGO.COLO_CNG.RESPONSES.20120802.00054131826'
Environment will now switch to UTF-8 code-set.
Parts of this log file may not display correctly
as a result. This is an expected behavior.
XML_REPORTS_XENVIRONMENT is :
/apps/applmgr/product/OFDEV/ofdevora/806/guicommon6/tk60/admin/Tk2Motif_UTF8.rgb
XENVIRONMENT is set to /apps/applmgr/product/OFDEV/ofdevora/806/guicommon6/tk60/admin/Tk2Motif_UTF8.rgb
Current NLS_LANG and NLS_NUMERIC_CHARACTERS Environment Variables are :
American_America.UTF8
stat_low = 8B
stat_high = 0
emsg:was terminated by signal 11
Appreciated for your earlier support.
Kindly suggest .
Many Thanks,
Ramesh.

Thanks ALex,
your are true it is concurrent program error ,
but it is working for small amount of data and generating the output and it is not working for larger data.
i have placed the code which i have used kindly suggest where i am going wrong.
i am calling the .rdf through the concurrent program, i've used the below query in RDF
select
BATCHHEADER
,BATCHTRAILER
,RqUID
,Severity
,PmtRefId
,StatusDesc
,ErrorDesc
,AsOfDate
,AsOfTime
,RqUID1
,SPRefId
from table(CL_CXFRFXFH_PKG.rcacknowledgments(:P_dir_name,:P_file_name));
kindly find the below code for the package CL_CXFRFXFH_PKG.
==========================
CREATE OR REPLACE package body APPS.CL_CXFRFXFH_PKG is
function rcacknowledgments (p_directory in varchar2, p_filename in varchar2)
return TRecordTable pipelined
is
nb_rec number := 1;
tmp_xml clob;
tmp_file clob;
rec TRecord;
begin
dbms_lob.createtemporary(tmp_file, true);
tmp_file := dbms_xslprocessor.read2clob(p_directory, p_filename);
rec.BATCHHEADER := regexp_replace(tmp_file, '.*<BATCHHEADER>(.*)</BATCHHEADER>.*', '\1', 1, 1, 'n');
rec.BATCHTRAILER := regexp_replace(tmp_file, '.*<BATCHTRAILER>(.*)</BATCHTRAILER>.*', '\1', 1, 1, 'n');
loop
tmp_xml := regexp_substr(tmp_file, '<\?xml[^?]+\?>\s*<([^>]+)>.*?</\1>', 1, nb_rec, 'n');
exit when length(tmp_xml) = 0;
--dbms_output.put_line(tmp_rec);
nb_rec := nb_rec + 1;
select RqUID, Severity, PmtRefId, StatusDesc, ErrorDesc, AsOfDate, AsOfTime, RqUID1, SPRefId
into rec.RqUID
, rec.Severity
, rec.PmtRefId
, rec.StatusDesc
, rec.ErrorDesc
, rec.AsOfDate
, rec.AsOfTime
, rec.RqUID1
, rec.SPRefId
from xmltable(
'/CMA/BankSvcRq' passing xmltype(tmp_xml)
columns RqUID varchar2(3000) path 'RqUID'
, Severity varchar2(3000) path 'XferAddRs/Status/Severity'
, PmtRefId varchar2(3000) path 'XferAddRs/Status/PmtRefId'
, StatusDesc varchar2(3000) path 'XferAddRs/Status/StatusDesc'
, ErrorDesc varchar2(3000) path 'XferAddRs/Status/ErrorDesc'
, AsOfDate varchar2(3000) path 'XferAddRs/Status/AsOfDate'
, AsOfTime varchar2(3000) path 'XferAddRs/Status/AsOfTime'
, RqUID1 varchar2(3000) path 'XferAddRs/RqUID'
, SPRefId varchar2(3000) path 'XferAddRs/SPRefId'
pipe row ( rec );
end loop;
dbms_lob.freetemporary(tmp_file);
return;
end;
end;
============================================
Many Thanks,
Ramesh.

IW31,IW32 Exit / BAdI to update Oprtn's Work center based on Header WrkCtr

SAP 46C
I am looking for a way to ensure that the first operation on a Maintenance Order has the same work center as the Header of the Operation. I am not seeing a BAdI that has the export parameters that allows update of information. Infact I did not see one in ECC6 either.
Thanks
Hari

Hi Dude,
Code to find out the BADI or exit..
REPORT ZBADI_FINDING.
TABLES : TSTC,
TADIR,
MODSAPT,
MODACT,
TRDIR,
TFDIR,
ENLFDIR,
SXS_ATTRT ,
TSTCT.
DATA : JTAB LIKE TADIR OCCURS 0 WITH HEADER LINE.
DATA : FIELD1(30).
DATA : V_DEVCLASS LIKE TADIR-DEVCLASS.
PARAMETERS : P_TCODE LIKE TSTC-TCODE,
P_PGMNA LIKE TSTC-PGMNA .
DATA WA_TADIR TYPE TADIR.
START-OF-SELECTION.
IF NOT P_TCODE IS INITIAL.
SELECT SINGLE * FROM TSTC WHERE TCODE EQ P_TCODE.
ELSEIF NOT P_PGMNA IS INITIAL.
TSTC-PGMNA = P_PGMNA.
ENDIF.
IF SY-SUBRC EQ 0.
SELECT SINGLE * FROM TADIR
WHERE PGMID = 'R3TR'
AND OBJECT = 'PROG'
AND OBJ_NAME = TSTC-PGMNA.
MOVE : TADIR-DEVCLASS TO V_DEVCLASS.
IF SY-SUBRC NE 0.
SELECT SINGLE * FROM TRDIR
WHERE NAME = TSTC-PGMNA.
IF TRDIR-SUBC EQ 'F'.
SELECT SINGLE * FROM TFDIR
WHERE PNAME = TSTC-PGMNA.
SELECT SINGLE * FROM ENLFDIR
WHERE FUNCNAME = TFDIR-FUNCNAME.
SELECT SINGLE * FROM TADIR
WHERE PGMID = 'R3TR'
AND OBJECT = 'FUGR'
AND OBJ_NAME EQ ENLFDIR-AREA.
MOVE : TADIR-DEVCLASS TO V_DEVCLASS.
ENDIF.
ENDIF.
SELECT * FROM TADIR INTO TABLE JTAB
WHERE PGMID = 'R3TR'
AND OBJECT IN ('SMOD', 'SXSD')
AND DEVCLASS = V_DEVCLASS.
SELECT SINGLE * FROM TSTCT
WHERE SPRSL EQ SY-LANGU
AND TCODE EQ P_TCODE.
FORMAT COLOR COL_POSITIVE INTENSIFIED OFF.
WRITE:/(19) 'Transaction Code - ',
20(20) P_TCODE,
45(50) TSTCT-TTEXT.
SKIP.
IF NOT JTAB[] IS INITIAL.
WRITE:/(105) SY-ULINE.
FORMAT COLOR COL_HEADING INTENSIFIED ON.
*Sorting the internal Table
SORT JTAB BY OBJECT.
DATA : WF_TXT(60) TYPE C,
WF_SMOD TYPE I ,
WF_BADI TYPE I ,
WF_OBJECT2(30) TYPE C.
CLEAR : WF_SMOD, WF_BADI , WF_OBJECT2.
*Get the total SMOD.
LOOP AT JTAB INTO WA_TADIR.
AT FIRST.
FORMAT COLOR COL_HEADING INTENSIFIED ON.
WRITE:/1 SY-VLINE,
2 'Enhancement/ Business Add-in',
41 SY-VLINE ,
42 'Description',
105 SY-VLINE.
WRITE:/(105) SY-ULINE.
ENDAT.
CLEAR WF_TXT.
AT NEW OBJECT.
IF WA_TADIR-OBJECT = 'SMOD'.
WF_OBJECT2 = 'Enhancement' .
ELSEIF WA_TADIR-OBJECT = 'SXSD'.
WF_OBJECT2 = ' Business Add-in'.
ENDIF.
FORMAT COLOR COL_GROUP INTENSIFIED ON.
WRITE:/1 SY-VLINE,
2 WF_OBJECT2,
105 SY-VLINE.
ENDAT.
CASE WA_TADIR-OBJECT.
WHEN 'SMOD'.
WF_SMOD = WF_SMOD + 1.
SELECT SINGLE MODTEXT INTO WF_TXT
FROM MODSAPT
WHERE SPRSL = SY-LANGU
AND NAME = WA_TADIR-OBJ_NAME.
FORMAT COLOR COL_NORMAL INTENSIFIED OFF.
WHEN 'SXSD'.
*For BADis
WF_BADI = WF_BADI + 1 .
SELECT SINGLE TEXT INTO WF_TXT
FROM SXS_ATTRT
WHERE SPRSL = SY-LANGU
AND EXIT_NAME = WA_TADIR-OBJ_NAME.
FORMAT COLOR COL_NORMAL INTENSIFIED ON.
ENDCASE.
WRITE:/1 SY-VLINE,
2 WA_TADIR-OBJ_NAME HOTSPOT ON,
41 SY-VLINE ,
42 WF_TXT,
105 SY-VLINE.
AT END OF OBJECT.
WRITE : /(105) SY-ULINE.
ENDAT.
ENDLOOP.
WRITE:/(105) SY-ULINE.
SKIP.
FORMAT COLOR COL_TOTAL INTENSIFIED ON.
WRITE:/ 'No.of Exits:' , WF_SMOD.
WRITE:/ 'No.of BADis:' , WF_BADI.
ELSE.
FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
WRITE:/(105) 'No userexits or BADis exist'.
ENDIF.
ELSE.
FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
WRITE:/(105) 'Transaction does not exist'.
ENDIF.
AT LINE-SELECTION.
DATA : WF_OBJECT TYPE TADIR-OBJECT.
CLEAR WF_OBJECT.
GET CURSOR FIELD FIELD1.
CHECK FIELD1(8) EQ 'WA_TADIR'.
READ TABLE JTAB WITH KEY OBJ_NAME = SY-LISEL+1(20).
MOVE JTAB-OBJECT TO WF_OBJECT.
CASE WF_OBJECT.
WHEN 'SMOD'.
SET PARAMETER ID 'MON' FIELD SY-LISEL+1(10).
CALL TRANSACTION 'SMOD' AND SKIP FIRST SCREEN.
WHEN 'SXSD'.
SET PARAMETER ID 'EXN' FIELD SY-LISEL+1(20).
CALL TRANSACTION 'SE18' AND SKIP FIRST SCREEN.
ENDCASE.
DO 2 TIMES.
ENDDO.

BADI for IW31/32 (work order)

Hi,
I have to find BADI for IW31/32 (work order). The requirement is to update delivery address on automatic PR created from non-stock items of the work order.
Please suggest. Points will be rewarded for appropriate suggestions.
Thanks,
Parvati

Hi
Execute the below program . It will give you all exits and badis for a transaction.
You can excute this by giving IW31 in the selection screen and you will get the badis and exits related to it.
REPORT Z_FIND_BADI .
TABLES : TSTC,
TADIR,
MODSAPT,
MODACT,
TRDIR,
TFDIR,
ENLFDIR,
SXS_ATTRT ,
TSTCT.
DATA : JTAB LIKE TADIR OCCURS 0 WITH HEADER LINE.
DATA : FIELD1(30).
DATA : V_DEVCLASS LIKE TADIR-DEVCLASS.
PARAMETERS : P_TCODE LIKE TSTC-TCODE,
P_PGMNA LIKE TSTC-PGMNA .
DATA wa_tadir type tadir.
START-OF-SELECTION.
IF NOT P_TCODE IS INITIAL.
SELECT SINGLE * FROM TSTC WHERE TCODE EQ P_TCODE.
ELSEIF NOT P_PGMNA IS INITIAL.
TSTC-PGMNA = P_PGMNA.
ENDIF.
IF SY-SUBRC EQ 0.
SELECT SINGLE * FROM TADIR
WHERE PGMID = 'R3TR'
AND OBJECT = 'PROG'
AND OBJ_NAME = TSTC-PGMNA.
MOVE : TADIR-DEVCLASS TO V_DEVCLASS.
IF SY-SUBRC NE 0.
SELECT SINGLE * FROM TRDIR
WHERE NAME = TSTC-PGMNA.
IF TRDIR-SUBC EQ 'F'.
SELECT SINGLE * FROM TFDIR
WHERE PNAME = TSTC-PGMNA.
SELECT SINGLE * FROM ENLFDIR
WHERE FUNCNAME = TFDIR-FUNCNAME.
SELECT SINGLE * FROM TADIR
WHERE PGMID = 'R3TR'
AND OBJECT = 'FUGR'
AND OBJ_NAME EQ ENLFDIR-AREA.
MOVE : TADIR-DEVCLASS TO V_DEVCLASS.
ENDIF.
ENDIF.
SELECT * FROM TADIR INTO TABLE JTAB
WHERE PGMID = 'R3TR'
AND OBJECT in ('SMOD', 'SXSD')
AND DEVCLASS = V_DEVCLASS.
SELECT SINGLE * FROM TSTCT
WHERE SPRSL EQ SY-LANGU
AND TCODE EQ P_TCODE.
FORMAT COLOR COL_POSITIVE INTENSIFIED OFF.
WRITE:/(19) 'Transaction Code - ',
20(20) P_TCODE,
45(50) TSTCT-TTEXT.
SKIP.
IF NOT JTAB[] IS INITIAL.
WRITE:/(105) SY-ULINE.
FORMAT COLOR COL_HEADING INTENSIFIED ON.
Sorting the internal Table
sort jtab by OBJECT.
data : wf_txt(60) type c,
wf_smod type i ,
wf_badi type i ,
wf_object2(30) type C.
clear : wf_smod, wf_badi , wf_object2.
Get the total SMOD.
LOOP AT JTAB into wa_tadir.
at first.
FORMAT COLOR COL_HEADING INTENSIFIED ON.
WRITE:/1 SY-VLINE,
2 'Enhancement/ Business Add-in',
41 SY-VLINE ,
42 'Description',
105 SY-VLINE.
WRITE:/(105) SY-ULINE.
endat.
clear wf_txt.
at new object.
if wa_tadir-object = 'SMOD'.
wf_object2 = 'Enhancement' .
elseif wa_tadir-object = 'SXSD'.
wf_object2 = ' Business Add-in'.
endif.
FORMAT COLOR COL_GROUP INTENSIFIED ON.
WRITE:/1 SY-VLINE,
2 wf_object2,
105 SY-VLINE.
endat.
case wa_tadir-object.
when 'SMOD'.
wf_smod = wf_smod + 1.
SELECT SINGLE MODTEXT into wf_txt
FROM MODSAPT
WHERE SPRSL = SY-LANGU
AND NAME = wa_tadir-OBJ_NAME.
FORMAT COLOR COL_NORMAL INTENSIFIED OFF.
when 'SXSD'.
For BADis
wf_badi = wf_badi + 1 .
select single TEXT into wf_txt
from SXS_ATTRT
where sprsl = sy-langu
and EXIT_NAME = wa_tadir-OBJ_NAME.
FORMAT COLOR COL_NORMAL INTENSIFIED ON.
endcase.
WRITE:/1 SY-VLINE,
2 wa_tadir-OBJ_NAME hotspot on,
41 SY-VLINE ,
42 wf_txt,
105 SY-VLINE.
AT END OF object.
write : /(105) sy-ULINE.
ENDAT.
ENDLOOP.
WRITE:/(105) SY-ULINE.
SKIP.
FORMAT COLOR COL_TOTAL INTENSIFIED ON.
WRITE:/ 'No.of Exits:' , wf_smod.
WRITE:/ 'No.of BADis:' , wf_badi.
ELSE.
FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
WRITE:/(105) 'No userexits or BADis exist'.
ENDIF.
ELSE.
FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
WRITE:/(105) 'Transaction does not exist'.
ENDIF.
AT LINE-SELECTION.
data : wf_object type tadir-object.
clear wf_object.
GET CURSOR FIELD FIELD1.
CHECK FIELD1(8) EQ 'WA_TADIR'.
read table jtab with key obj_name = sy-lisel+1(20).
move jtab-object to wf_object.
case wf_object.
when 'SMOD'.
SET PARAMETER ID 'MON' FIELD SY-LISEL+1(10).
CALL TRANSACTION 'SMOD' AND SKIP FIRST SCREEN.
when 'SXSD'.
SET PARAMETER ID 'EXN' FIELD SY-LISEL+1(20).
CALL TRANSACTION 'SE18' AND SKIP FIRST SCREEN.
endcase.
do 2 times.
enddo.

Reference document number of 103 movement not seen in 105 movement documnt

Dear all,
I have made a material document with movement type 105 with reference to 103 document.
After creation, the field LFBNR in the 105 document is not updated with the 103 document number.
In all other cases the document number of 103 movements are updated in the the field of 105 document.
Can anybody can share me if you have any information about this scenario and what would be the solution.
Thanks....
Hari.

Hi Murugan,
I am giving you more clarification.
I have created a Good Receipt through MIGO using 103 movement. Later I have created 105 movement with respect to 103 movement reference through release blocked stock.
After creation of documents, when checked the document created through 105 movement there is no reference number of 103 document number found in the document number of 105 movement.
In the table MSEG field LFBNR is supposed to get updated with the reference number of the document created through 103 movement.
In this case, this reference number is not updated in the table MSEG-LFBNR.
My question is that how the document with 105 movement get posted without the reference of document of 103 movement and what would be the reason.
Hope the question is clear.
Awaiting for your replies.
Thanksss....Hari.
Edited by: Harikrishnan_sap on Nov 13, 2009 2:02 AM

Delivery note of 105 while doing MIRO

Hello,
We follow 103 & 105 movement type while doing MIGO (103 for initial gate entry and 105 for final store entry).
But when we go for MIRO, as a reference document (Delivery Note), it shows document generated at the time of 103 entry.
And while doing MIRO with delivery note of Movement type 105, system does not show any line items to be invoiced.
Can anyone let me know, why system is not picking the delivery note for 105 and picking the delivery note for 103.
Thanks
Prabhjot Singh

Hi,
why do you want reference materials from different po during miro then?
Silas
Edited by: Silas Ngcobo on Mar 31, 2011 12:18 PM

MM-CIN: Dealer Purchase with mvt types103 /105

Dear friends,
When we are buying from the dealer, he gives the quote including the excise duties & Purchase Order will be issued , the price of which includes the Excise duties and VAT/CST. When he sends the Excise Invoice at that time, he will give the details of the excise duty paid, so that we can be able to take credit in our registers
To address this, at the time of Goods receipt, excise invoice will be captured by selecting the MRP indicater in the "Miscellaneous" tab& then we will give the duty amounts as applicable. The method is suggested by the SAP in case of Dealer POs.
So, system reduces the duty amounts from the material inventory cost (GR/IR clearing account) since we claim back the duty amounts by way of CENVAT creidit. This scenorio is working fine when we are taking the Goods receipt with 101, but if we do GR with 103 & 105 system is not reducing the duty amounts from the Material Cost (BSX).
That amount is getting reduced from material at the time of Invoice. That leads to problems if we do not have sufficient stock by the time invoice is verified..
Can anyone suggest me, why system is working properly with 101 mvt, where as not with 103 & 105 combination.
103 & 105 combination is nothing but same effect as 101. What I feel is it should work but please suggest where i am doing wrong?
Your solution will help me a lot.
thanking you in advance
With Regards,
Srinivasa Prasad

Hi Srini,
Can u send the screen shot to my mail([email protected]), screen shot of GR/IR clearing, so that i can analyze the issue properly.
Cheers..
Santosh

Netra T1 105 Raid

Is it possible to configure hardware controlled RAID for the Netra T1 105?
If not, how is it possible to configure software RAID?
Thanks in advance

1. What type of cable are you using?
2. Are you connected to the serial A or B?
The cable that I use is a flat one, and I'm pretty sure that the usual straight thru ethernet or crossover cables do not work.
Serial Port Pin ------------------------- 9-pin Connector
(RJ45) ------------------------------------ (DB-9)
Pin 1 (RTS) -----------------------------> Pin 8 (CTS)
Pin 2 (DTR) -----------------------------> Pin 6 (DSR)
Pin 3 (TXD) -----------------------------> Pin 2 (RXD)
Pin 4 (Signal Ground) ---------------> Pin 5 (Signal Ground)
Pin 5 (Signal Ground) ---------------> Pin 5 (Signal Ground)
Pin 6 (RXD) -----------------------------> Pin 3 (TXD)
Pin 7 (DSR) ----------------------------> Pin 4 (DTR)
Pin 8 (CTS) -----------------------------> Pin 7 (RTS)

Mvt Type 103 & 105

Hi Experts,
Can you please tell me how these two mvt type 103 & 105 works.Please tell me some scenerio
AR

Hi Rana,
1) Movement Type - 103 Goods receipt for purchase order into GR blocked stock means not approved by Quality dept.for ready
    to use.
     (Ex. PO Qty - 10 Nos. ordered, 7 Nos. accepted by quality dept. & stock accounted with 101 Mvtype and 3 Nos. are not
            accepted by Quality dept. & stock accounted with 103 Mvtype in GR blocked stock)
2) Movement Type - 105 Release from GR blocked stock for purchase order means approved by Quality dept. from GR blocked
            stock. (From the above example 3 Nos. GR blcoked stock, after 100% quality inspection 2 Nos. released from GR blocked
            & stock account 101 Mvtype for ready to use. 1 No. rejected & return to vendor with 122 Mvtype).
Hope, it is clear for you.
Thanks and Regards,
K.Rajendran.

PIONEER DVR-105 problem only with one set of CDs

My PIONEER DVR-105 works fine with most CDs, but when I bring NOVA Art Explosion CD set home from work, I can't get them to appear on my desktop. I've checked Pioneer website for firmwear upgrades & the last one is for Mac Classic.

This sometimes just happens - a drive won't like a certain set of media. Happens to me with client-provided CDs/DVDs.. There's not much you can do but upgrade the drive to a newer unit.
-Douggo

103 & 105

I have created a PO with text.I have doen 103.When i try to key in the PO number & do 105,the system says document does not contain selectable items.
Does 103 & 105 option will not work with item text?

Hi,
In MIGO choose---- release GR blocked stock----material doc & then choose 105 material movement type. It will work. Choose correct material doc number.
Regards,
Alok Tiwari

BH 105 working or not working

Similar Messages

Maybe you are looking for