BH-903 turns mono instead of stereo

Hi,
I have been using Bh-903 with e71 and earlier with E61i and was very satisfied with it. However since last week it has turned mono I can only hear audio from right ear and left has gone silent.
I have tried reseting the headset but problem remains.
I have tried with different phone problem is still same.
Any help or it has just broken...
Chand

Stereo tracks should be unaltered. What have you done?
this is how you should create it...
Right-click in this area and add new audio track...
Select mono audio submix track...
A mono submix will be created in the mixer...

Similar Messages

Why Does FCE capture DV audio as dual mono instead of stereo?

FCE captures DV audio as dual mono audio files instead of a single stereo audio file. You can see this if you "Show Movie Properties" in Quicktime. Files I captured in Premiere 6 years ago have a single stereo file. The problem is that the new dual mono format for DV won't play on the Final Cut Pro 3.04 installed on my wife's G4 (OS 10.4.11, Quicktime 7.6.2). FCP 3.04 doesn't see any audio for these dual mono files though it will play the video. It won't even create an audio waveform. But FCP 3.04 plays the older stereo audio clips captured in Premiere just fine. And if I export the dual mono files out of QT as a stereo file, then FCP 3.04 will play them just fine.
This lack of backward compatibility is quite frustrating. I can't seem to find a setting in FCE that will capture audio as a single stereo file. Why isn't NTSC DV always stereo? I guess maybe they had to go dual mono to facilitate surround sound panning in 5:1 or something. If nobody knows how to do this in FCE, I guess I'll just capture in FCP 3.04. I spent the better part of a day figuring out this hidden little tidbit. The lesson is don't try to go back!! We must always accelerate forward into newer versions and formats.

The problem is in your wife's machine. She is using a version of the OS and QuickTime that are much too new for the version of the software she's using. She really not not be using an OS newer than 10.4.10 and QT should 7.2 or earlier.
Yes. I was beginning to suspect that this was at the root cause of my issue. Thanks for the info. Frankly, my wife needs to buy a new Intel iMac so we'll both be able to work on the video I'm dumping. I had FCP 3 lying around from years ago and it's the only thing that might have worked on her old G4 AGP, so I thought I'd give it a try.

Encore transcoded audio into mono instead of stereo!!

OK here is my workflow:
Shot 1080p video on Sony XDCAM PMW-EX1 with stereo audio track. Imported footage using Sony XDCAM Transfer (makes .mov files). If you open the .mov files in QT Player they show as having Track 1 - Video, Track 2 - Audio (left), Track 3 - Audio (right). I then used QT player on most of these files to set in and out points and then copy the selections, saving them into referenced movie files. (Did not do this on all of them though). In QT Player, all of these movie files play fine. Dragging the movie files into Peak 5.2 you can see they have a Track 2 and Track 3 for the audio (stereo!).
Then I dragged all my movies (referenced and non) into Adobe Encore CS4 and selected everything and transcoded it all. (I dragged it to the timeline befoer transcoding.) The timeline shows just one audio track. It's the audio track that appeared when I dragged and dropped the video from the bin into the timeline. Should I have made a second audio track before dragging and dropping?
Because when I did Build, and it made the BMDV folder, then I burned that to a BD-R, and played it, it's in mono. All the AC3 files are in mono (left channel only). Why would that happen? Shouldn't it automatically get both channels of the sound and do stereo, or warn you before burning if it's in mono?

You are correct, sir. I'm surprised the software is not intelligent enough to recognize that. It really should be drag-and-drop simple. It should at least ask the user, "do you want to discard one audio track?"
To solve this I tried the following: go into Final Cut and export the audio as stereo AIF, then drop that in. I wanted to avoid having to re-transcode all the video, but when I did this, it decided to anyway, then had an error. So I deleted the transcode folders. Then I went to transcode again and now it's saying "Error Creating Transcode Folder" or whatever. Sigh.
This program just seems too finicky and not very robust. I'm going to upgrade to Final Cut Studio 7 and just use Compressor 3.5, which finally can export a BDMV folder that I can just burn to whatever.

Recording in mono instead of stereo

I am an elementary teacher creating student podcasts. We've had no problem until today.
I have 4 5th generation video ipods that we use with TuneTalk stereo to record the pieces of our podcast. Suddenly one of my ipods will only record in mono. It downloads perfectly to iTune and everything sounds fine, but when I pull it into Garageband - it sounds like the chipmunks are visiting. My 4th graders think it's great - I don't!
I redownloaded - the voice memos - made sure I had synced it to the correct computer and the problem continued. I am syncing to a MacBook running 10.4.9. I made sure my iTunes and my iPod software are up to date. I am using iTunes 7.1.1
I have recently updated Quicktime to 7.1.6 and have been having some issues with the Q with the ? for podcasts using Safari. Would that bother my voice memos???
Any suggestions??
MacBook Mac OS X (10.4.9)

What model of camcorder is your video coming from and what format and resolution is it?
If you're using video from a camcorder that shoots in 5.1 and your project is set up for stereo, you can end up with issues like this.

Turning mono sound into stereo sound

Hi, would there be anyone here who knows how to unlink the L and R audio tracks to duplicate the track recorded with a mono mic so it comes out as stereo?
I also have Soundtrack Pro to work with, if that helps. Thanks a lot!

would there be anyone here who knows how to unlink the L and R audio tracks to duplicate the track recorded with a mono mic so it comes out as stereo?
that would be manual/index/unlink.
Mon tracks can be simulated into stereo in many different ways. Duplicate the mono tracks to both L&R and change the pan slightly on each. You can add a slight bit of reverb to one or both or alter the EQ on one or both. There re other interesting filters like phasing you can apply from within Soundtrack Pro. Heck, might even be a section in the manual on how to simulate stereo imaging form mono recording.
bogiesan

Mono a1,a2 instead of stereo a1+a2

My FCP project has its sound in two separate mono channels a1 and a2 (in Viewer tabs). When I close the mono tab, a stereo tab appears but it carries no signal. Now I cannot treat the two channels both at the same time in raising and lowering gain (with the pen tool). How can I combine these two to act as a stereo pair?
Hans van der Meer

To create a stereo pair:
1 Select a pair of mono audio clip items in the Timeline. (Use the Command key to select the second item, if necessary.) If you click one item of a linked pair, the other item is also selected.
2 Choose Modify > Stereo Pair (or press Option-L).
The stereo pair indicators appear on the selected clip items in the Timeline.
If the clip items you want to make into a stereo pair have different durations, the clip items are trimmed to the region where they both overlap. The levels, pan settings, and filters that were applied to the top clip are applied to both, and the clip attributes from the bottom clip are ignored.
+Source: Final Cut Pro User Manual+

Audio Imports a Single Mono Track instead of Stereo

I am transferring mini-DV footage into a project that I was previously working on with a different camera. The audio used to import in Stereo Pairs, now it is just a single Mono track.
I don't think I changed any settings. I looked in the Clip Settings on the Capture window but I don't see an audio toggle. I am using FCP 5.0.
What should I do differently when importing and how can I get the previous single Mono imports into Stereo Pairs?
Thanks,
Hagen

If you have only one single mono audio track then duplicate it (select audio track then hold down SHIFT and OPTION/ALT key simultaneously and drag the mono audio clip down to the audio track below, it will give you a duplicate) after doing that select and double click the duplicated mono track and in the viewer Pan that hard right (1). Finally select both audio tracks and hit Option+L. You now have stereo pair.

New to logic and i cant figure out how to dupe a mono single to stereo?help

So I'm loving logic but im used to working on adobe audition and i cant figure out for the life of me how to take the mono loop im working with and turn it in to stereo. Please help and thanks ahead of time.

You can use a mono to stereo plugin. Spreader would be a good choice.

Mono vs. Stereo?

I have a USB device which contains 4 1/4 Inputs (2 Left/Mono & 2 Right). If I was to run 4 external Instruments as Mono instead of 2 external Instruments couldn't I break it back down from 4 Mono Instruments into 4 stereo Instruments within Logic Pro?

If you've got an external device that puts out a stereo signal then you will lose whatever stereo separation there is by summing it to mono. You can then create a new stereo image using certain FX, but it would not be the same as the original inst.'s stereo image. You will have to decide if the instrument you are using benefits from its own stereo capabilities. ie; a guitar through a stereo chorus pedal. Can you get rid of the pedal and use Logic's chorus FX (go mono), or is the pedal special and you want to preserve what it does (keep it stereo)? If you've got outboard synths the chance is more likely you are going to want those in stereo from the source.

When I pan left, the volume is turned down instead of being panned left???

When I pan left, the volume is turned down instead of being panned left???
The instrument strip and output 1-2 are both in stereo in my environment. I don't get it-any ideas anyone?
I'm using logic 7.2.3
Thanx in advance
!

Thanks for your response.
hrmmm..... I don't see any "Pan Law". I'm running Logic 7.2.3 btw.
I think it might be my audio drivers.
"I have a FW 410 interface, everything seems to work fine except for the panning. Instead of panning properly, the volume is turned down when I pan left and volume is raised when I pan right. This only happens when I have the FW 410 interface selected in the audio/hardware setup. Panning under the built-in audio works fine so I would imagine it's the M-Audio drivers for the FW 410 that need a working update for Leopard."
Can anyone confirm this?
Thanx again in advance,
Paul

Hello My ipads Power button is not working properly when I press it once it shows option to turn off instead of locking and some other display problems like it suddenly lockes down or display disappears ...Please help. Thank You

Hello My ipads Power button is not working properly when I press it once it shows option to turn off instead of locking and some other display problems like it suddenly lockes down or display disappears ...Please help. Thank You

Thanks for that information!
I'm sure I will be calling AppleCare, but the problem is, they charge for the phone calls don't they? Because I don't have money to be spending to be on the phone with a support service.
In other things, it seemed like the only time my MacBook was working was when I had Snow Leopard without the 10.6.8 update download that was supposed to be done to prepare for OS X Lion.
When I look at the information of my HD it says that I have 10.6.8 but that was the install that it claimed to have failed and caused me to restart resulting in all of the repeated problems.
Also, because my computer is currently down, and I've lost all files how would that effect the use of my iPhone? Because if it doesn't get fixed by the time OS 5 is released, how would I be able to upgrade?!

TS3274 If I touch camera icon, the screen turns black instead of capturing image. Let me know how to troubleshoot.

If I touch camera icon, the screen turns black instead of capturing image. Let me know how to troubleshoot?

Try closing the Camera app:
1. Double-click the Home button to reveal the Task Bar
2. Hold down the Camera app for a second or two until you see the minus sign
3. Tap the minus sign to close app
4. Tap area above Task Bar to return to Home screen
If the above doesn't solve the problem, do a reset:
Hold the Sleep and Home button down for about 10 seconds until you see the Apple logo. Ignore the red slider

Possible to Join Two Mono Tracks to Stereo, Or Change Panning of a Stereo?

In the new Garage Band 11, is it possible to Join Two Mono Tracks to Stereo, or Change the Panning of a Stereo track, or split a stereo track into two mono files?
Sometimes it would be convenient when I have a lot of tracks to combine two mono tracks into one stereo track to eliminate an additional track.
Also, I find that I often want to change the panning of a stereo track to either make it wider, or merge the two channels, even reverse L&R. If no way to change the panning of a stereo track can a stereo track be split into two mono tracks to be panned differently?

Woodwyn wrote:
is it possible to Join Two Mono Tracks to Stereo
only by exporting the two tracks
or Change the Panning of a Stereo track
you can pan a stereo track in every version of GB with the pan knob
or split a stereo track into two mono files?
indirectly:
http://www.bulletsandbones.com/GB/GBFAQ.html#stereotomono
(Let the page FULLY load. The link to your answer is at the top of your screen)
want to change the panning of a stereo track to either make it wider, or merge the two channels
that's different. no, you'd have to split the track into two mono files as described above.
even reverse L&R.
same answer

Convert dual mono tracks to stereo in Audition CC

How do I convert dual mono tracks to stereo in Audition CC please?

Sorry, but your intentions here aren't clear.
Do you have two mono signals on one stereo track, or are you talking about two separate mono tracks that should be stereo, and you want them as a single stereo track?
With the latter, open one file and copy it to the clipboard. Open the other file, and use Edit>Convert Sample Type to convert it to 'stereo' (really dual mono). Select just the side you want to replace, highlight it and hit Delete - this should leave your original file on one channel, and nothing on the other. Place the cursor at the start of the empty section and paste the clipboard contents here. Save the result. You now have a stereo file.
If you have a dual mono file and you want some stereo ambience on it, then have a look at SHEPPi. This does a remarkably good job of that on mono files!
There are several other ways of doing file combining - you could do it quite easily in Multitrack mode, and there are also some utilities around that will do it directly for you - although you could easily be forgiven for being completely unaware of them, because generally they are used for reorganising multi-channel Broadcast Wav files, and don't show up using a simple search term.

5.1 sound instead of stereo

My camera (Sony HDR-SR11) records the sound in normal stereo.
Also my prroject is regarded to be in stereo.
However when I import my footage, 5.1 tracks are created.
The properties of my clips are on the attachment.
I should do something wrong, but I can't discover what.
Where am I supposed to make a mistake?
Rob

Hi, Harm. You helped me once before and I'd like to ask if you could help me again. I have two concerns:
1) I did an interview on video not long ago, using a Sony PD 150 camcorder. When it came to edit the video footage and I imported it into CS4, I found that the sound was a little low. I couldn't increase the volume enough the usual way (by raising that little line on the sound track in the timeline) and was wondering if there was another way to do that.
2) I checked the inteview footage the other day and found that, whereas the video is OK, the sound has disappeared completely! The line on the soundtrack in the timeline, the one that is usually squiggly with the sine wave, is now completely flat. Do you know how or why that happened and is there any way to get the sound back?
Many thanks!
Lewis
Date: Sun, 20 Sep 2009 07:26:33 -0600
From: [email protected]
To: [email protected]
Subject: Re: 5.1 sound instead of stereo
It should not be a problem, only optically, but you can try to just delete the 5.1 tracks.
>

BH-903 turns mono instead of stereo

Similar Messages

Maybe you are looking for