BH104 & Nokia 6300 could not be paired

We bought a new bluetooth device BH 104.... When we try to pair it, it is not detected by any mobile (Nokia 6300 / S302 / W700i(sony ericsson))...Did any one had the same problem with BH 104 and could any one hep me out in sorting out this issue..

Are you putting the BH-104 in pairing mode when you are trying to search for it with your phone? Look in the manual that came in the box, it will explain how to put the device in pairing mode,usually you hold down two buttons when turning it on etc.
Once it i in pairing mode you can search for devices in the phones bluetooth menu and it should find it, enter the pass code 0000 and it should connect and pair successfully.
iPhone 5 32GB
MacBook Pro Retina 15" Mac OS X Mountain Lion 10.8.4

Similar Messages

Nokia 6300 charger not supported

when i plug in my nokia charger, it says charger not supported, what shall i do, the charger works on my sisters nokia 6300 but not mine!!!

There is a little chip inside the phone that if it is faulty or damaged you get this message.
If it was sealed and brand new then i would put it down to a poorly manufactured handset.
The shop needs to take this back and replace it for you.
If i have helped at all a click on the white star below would be nice thanks.
Now using the Lumia 1520

Nokia 6300 can not swich on, only blue lights on t...

Hello,
I have left my nokia 6300 in the rain. After that I couldn't turn on my mobile. I left the phone to dry for a couple of weeks. It does nothing when you put it in the charger. When I put in my SIM-card, the lights on the side of the phone turn blue, but the phone doesn't swich on. The blue lights stay blue for approximately 2 minutes, then they slowly fade out. What does this mean?
Greets,
Peter

the only thing you can do in your situation is to take your phone to your local Nokia Care Centre for them to take a look at.
If you found this or someone's comments helpful or like what that person has to say, please give some Kudos to their post!

Nokia N8:Could not personalize Nokia Tune ringtone

It's been 2 months I'm using N8 & I like N8 very much.
But I was surprised to check that you cannot assign Nokia Tone to contact if default tone in current profile is not Nokia Tone.
Also in Power Save mode though I have not selected mute phone in 'Turning Control' call gets muted when mobile is turned upside down.
I thought Nokia may have fixed this problem in software update 013.016 but it's not been fixed.
Waiting for Reply.
Sagar S

I can't get that to work either. I just bought my phone ad was ready to return it.

ISync & Nokia 6300

Hi all,
I seem to be having problems with the above!
If i try to sync i get the message "iSync can not connect to this device"
I have looked through various posts and on the Nokia website and i cant seem to find out why!!!
Am i doing something wrong or is it that this fone is not compatible?
Thanks for any help!!!

Did you check Apple's iSync Supported Devices page?
http://www.apple.com/macosx/features/isync/devices.html
If so, you should've seen that the Nokia 6300 is not supported by iSync.
However, it is supported by third-party iSync plugins which have been mentioned on here many times, and can be found by typing into the search box top-right.
http://web.mac.com/the_reamer/iWeb/S60/isync%202.4.html
http://www.novamedia.de/sync/

Nokia E71 & GPS Not Working

Dear All,
I have purchsed two E71s; one for my wife & one for myself.
I loaded Nokia Maps & could not get the GPS to connect to my position.
I went to the Nokia Store in Regent STreet London & they stated that it could take up to 30 minutes initially to find a signal.
A week later I am in the same situation.
I have reset the phone to factory settings & reloaded the maps & still nothing.
Is this a fault on the phone, if so I will return the device & notify you guys if faulty.
In the meantime, any suggestions would be appreciated.
M

losingmynerve wrote:
Not working with E75 either. It just keeps telling me GPS signals are weak indoors (or whatever) and I'm standing outside - on a damn airport..!!! What on earth could be wrong this time with this Nokia..?
I'm not familiar with the E75, but do you have Assisted GPS turned on? If not, it can take quite a long time to find the satellites if you've significantly changed your location since the last time you used the GPS function - sometimes up to half an hour. With Assisted GPS switched on it should only take a couple of minutes.
Large buildings, high mountains and other obstacles can interfere with getting a GPS lock, and can be quite a problem depending on exactly what angles the satellites are to your position. Electronic interference from radar could also be a factor at airports.
If I've helped you, you can thank me by clicking the green 'kudos' star on my post. Cheers.

Nokia 5230 will not pair woth ovi-suite

My new nokia 5230 will not pair with ovi-suite. Ovie suite finds it in its search for devices, but when it asks me to put the random code into my phone, nothing comes up on my phone and within a second or two ovi-suite tells me pairing has failed. My bluetooth is definately on and visible to all and the ovi suite is the latest version (and my phone is definately on the list as compatible) All software is updated on my phone as well. Thanks!

Hi Marysmum ,
Could you be more specific about your issue.
Which operating system do u use?
Which firmware version do you have in your mobile? ( *#0000# will reveal the details)
Is the cable connection working fine?
Which version of OVI suite you use?
Go to OVI suite -> help -> About nokia OVI suite -> System information. Paste the information...
Regards
Regards,
Diwa
If you like my post, kindly acknowlege the same by giving a kudos to me

I could not pair my bluetooth device with my ipad mini retina display. Is there anyone facing the same problem?

I could not pair my bluetooth device with my ipad mini retina display.
My ipad could not detect the bluetooth device. I do not facing this problem with my iphone and my older ipad on the same bluetooth device.Is there anyone facing the same problem?

Yes I tried pairing with my bluetooth car hands-free set - Not discoverable.
I tried to pair with my bluetooth headset - Also not discoverable.
I have no problem with my other apple products my older ipad2 and my current iphone5.
Just this ipad mini retina display could not discover the above bluetooth device.
Any idea on how to solve this? Thnaks.

Could not connect Nokia 6303i via USB cable to Win...

Hello guys in this forum
Hello driver development group
This is not a question for help, but more a question for sharing experiences. I recently bought a new Nokia 6303i, worked a little bit with it and finally I wanted to connect it to the PC to enter the contacts from my old phone with the computer keyboard instead of the phonebook keys.
Well, the installation sounded quite easy at a first glance: Download the Nokia OVI suite, connect the Nokia phone to the PC and go on. I did that way, but it just did not work.
The PC I'm using is an Acer laptop, Windows 7 64 Bit system, MS Office 2003, Visual Studio 2003/2005, Firefox, Thunderbird and VMWare Workstation, Comodo Firewall and free-av virus scanner installed. Nothing special, nothing I could not handle, especially no games or other special hardware drivers that could interfere -- most software is installed in virtual machines, so the main computer is rather "naked". I connected the phone to the PC in the "Mass storage mode" to get a drive letter, and installed the OVI suite from the SD card. Worked quite well, and finally I re-connected the phone to the Windows PC.
The phone was detected as "NOKIA" in the Windows explorer. I chose "PC Suite" on the phone and started the OVI suite - but nothing. OVI suite told me: "Detected device: NOKIA. Phone is not in PC Suite mode". Eeeh?!?
I tried it several times, but no chance. Although "PC Suite" was active on the phone, the phone was not recognized. Ok, I though, either a problem with the drivers or a hardware problem. So let's see what an older operating system would tell me. I switched on a Windows XP 32 Bit system in my VMWare virtualisation software and connected the phone. The phone connected but did not directly work. I had to use the "mass storage mode" setting to get a drive letter. I installed the OVI suite that was shipped on the SD card (which deleted itself from the SD card later -- baaad habit, I was hopelessly searching for it later on, but ok...). Then I disconnected the phone, reconnected, chose "PC suite mode" and... perfect, stable connection, OVI suite was working totally fine! So I disconnected the phone and closed the VMware machine again.
Ok, so a problem with Windows 7 64 bit. I deinstalled the OVI suite, downloaded the most recent version from the web which obviously was said to support Windows 7 64 bit, installed, reconnected the phone... nothing. Same situation as before.
I deinstalled OVI suite again and downloaded/installed the most recent version of PC suite -- which was said to contain all connectivity drivers including for Windows 7 64 bit. I connected the phone started PC suite and... well, phone detected, but used in "compatibility mode", although the "PC suite mode" was chosen on the phone. But ok, let's see what I can do in the compatibility mode. Full of hope I clicked on the "address book" in PC suite. The phone reacted, it said "PC suite mode activated". Hoping... Hoping... then it said again "PC suite mode activated". Eeh? It is already activated!?! 10 Seconds later: PC tolds me: "Phone could not be switched to PC suite mode. Shhhhh*t!
I googled as hell, and then I saw that I should use the PC suite cleaner before installing. Ok, PC suite deinstalled, PC suite cleaner used, PC suite reinstalled, phone connected... nothing, same behaviour.
Next tip I read: Install the connectivity driver manually. Ok, everything deinstalled (and I mean, everything! All components in the program list that were entitled to be from NOKIA: PC suite, the two drivers and something else I cannot remember). I downloaded the connectivity driver, connected the phone, phone was recognized as "NOKIA" like before. I installed PC suite again and... nothing. Same behaviour. Arrr*h!
The final tip that really helped: I read somewhere in the web that Windows 7 was using the wrong drivers. I took a look in the control panel, looked up the NOKIA phone in the device manager, took a look to the drivers, and indeed. The driver that Windows 7 was using was somehow from 2008!?! So that was an internal driver of Windows 7 and not the newly installed Windows 7 driver which I manually installed!
I clicked on the button "Update drivers" for the "NOKIA" phone and manually chose the connectivity drivers in the "C:\Program Files\NOKIA\Connectivity..." or-something-like-that folder. Suddenly the phone was re-recognized: "NOKIA phone USB parent". That was new!
But now, the PC suite on the PC did not recognize the phone at all andmore. Hmmm, a new look to the device manager revealed the reason: A couple of new devices were detected, but all with an exclamation mark. Drivers not found. But with a little bit of luck... I opened every such device in the device manager and told Windows to update the drivers. It asked me for a path where the drivers were saved, and here I just specified the path of the nokia connectivity drivers again (this "C:\Program Files\NOKIA\Connectivity..." or-something-like-that folder). That worked! Now I got one after the other the COM-port driver, OBEX and etc...
At the end I startet PC suite... whahoooo, it works! Phone connected and address book editable! Uff. Nice.
So a deep driver problem.
Then I did a near-mistake: I wanted to update the operating system on my NOKIA phone. I installed the phone update manager in Windows 7, left the PC suite, started the update manager and it immediately recognized the phone. I started it and in told me: "Do not touch the phone or anything", time 15 Minutes. I waited and waited and saw the phone screen disappearing, but ok. I saw the USB drivers being disconnected and trying to be reinstalled, but Windows did not recognize it. But I did not touch anything. Then, the Hiobs-message from the update manager: "Phone disconnected during update. Please swich on and reconnect". Whaaaaa?!?!?
Ok, disconnected the phone, switched off, switched on, reconnected. But Windows 7 did not recognize it correctly anymore. Some unknown devices in the device manager, only the "NOKIA phone USB parent" was still working correctly, and there was now an unknown device which I was not able to activate by specifying drivers manually (it was most likely a USB flash device what I figured out later). And the phone behaved strangely, sometimes crashing when hoovering through the menues... EEEhhh.....
Ok, emergency plan, phone nearly destroyed. I again turned on my VMware and connected the phone to the OVI software in the virtual Windows XP. Still worked fine. I clicked on the update menu item of OVI suite. OVI suite was detecting the phone software, downloaded the new version and started to update. Again it told me: Wait 15 minutes, do not touch anything. And I did. I saw Windows reconfiguring its hardware settings as new hardware was detected, and there were problems in installing a "USB flash device", but the software did not cancel. And finally: Update successful! Uff... I checked the phone (*#0000#), and it was ok. Uuuuh.
Then I switched off the virtual machine, conected the phone again to Windows 7, but there was still a driver problem. Most devices had an exclamation mark. I manually deinstalled all the NOKIA drivers in the device manager and actuivated the "Delete driver from system" checkbox whereever possible -- including the "NOKIA phone USB parent". I removed the phone from the USB cable and plugged it on again. Now windows re-recognized it as "NOKIA" phone, but again used its own internal -- wrong -- driver set. I switched the driver again as described above to the Nokia Connectivity drivers in the program folder, got again the "USB parent" and the unknown devices, manually specified the drivers for the unknown devices by using the path to the Connectivity drivers and finally I got the situation from before the update: Nokia PC suite running fine, I can access my contacts and do anything I like in Windows 7 64 bit.
That was a nightmare and took me about two days intensive research and testing. What a mess...
I hope I could help anyone of you with this when you have trouble installing the PC/OVI suite in Windows 7. And don't try to update the phone in Windows 7, it's dangerous at the moment!
Probably you guys from the driver development can take a more close look to Windows 7 64 bit and its own pre-installed drivers. Does anyone of you have similar experiences?
Best regards,
Mighty Knife

Uhm, I'm experiencing the same problem with some Linux relase. Unfortunately I was unable to solve the problem if not installing a windows emulator. Maybe you're already familiar with it, but it seems the only solution. Through google I found this, I hope I made you a favor.
http://www.macwindows.com/emulator.html
Bye

Problem With Nokia 6300 USB DATA CABLE OPTION Not ...

Hi, I have a Nokia 6300 v.5.00. My problem is when
I connect my phone using a mini usb cable to the pc, USB Data Cable option on my phone is not highlighted, so I can't use the pc suite mode functions etc. I tried 3 different computers with Windows XP SP3 and 3 different good quality mini usb cables but still to no avail. The options like data mode, nokia pc suite mode still doesn't seem to appear. I also tried different USB slots in these 3 computers still no luck. Can anybody tell me what's the problem? Is there something wrong with IC on my phone or something? What drivers do I need? This is my first time using the mini pop port on THIS phone, I've been using bluetooth to transfer files but it's so slow. Please help

Hey guys there is a solution with you problem and it works fine for me now. After all the comments & suggestions i read i finally got the best solution for all of you. This can be very simple. Try to install the Nokia PC Suite v7.0.2
in your pc after that try to search & find the Nokia USB connectivity cable driver v6.8.2 in the web if u get it. Then uninstall the usb connectivity cable driver v7.0.2 in the CONTROL PANEL ADD/REMOVE after that install the "usb connectivity cable driver v6.8.2 in ur PC then try to plug in your Nokia 6300 it will install automatically ur phone. PRESTO your unit can be now Recognized of your PC.
THAT's ALL FOLKS!!!

TS2776 I get a message that says"ITunes could not connect to IPhone becuase the pairing record is missing" I never saw this error message before. Anyone knpw what's up?

I get a message that say: ITunes could not connect to IPhone *** because the pairing record is missing" I never saw this before anyone know about this??

Do you still get that one if you restart the PC and try to connect again?

I just bought a new Mac mini but cannot complete the set up and I could not pair my apple wireless keyboard with mac min. Can someone help?

I just bought a new Mac mini but cannot complete the set up, as I could not pair my apple wireless keyboard with mac min. Can someone help?

Bluetooth: How to set up your Apple Wireless Keyboard

"Connecting to Motorola H500" and then "Could not pair."

Here's my problem...my iPhone starts searching for devices, it finds my bluetooth device, then it asks me for the pin number, then it says it's trying to connect to it and then it tells me: "Could not pair with Motorola H500." Just last night (after the 2.0 update) it worked perfectly fine and I was able to make calls using my bluetooth device, so what happened? Anybody have an idea why it won't pair with it? Help, please!

You need to set your H500 into "discovery mode" also:
From the Off status, hold its button down for about 10 seconds until you see a sold blue light, then go to the iphone's Bluetooth settings do the pairing.
My iphone automatically paired without having to enter the H500's default PIN "0000".

Transfer mobile...could not pair.

Hi....I have transfer mobile on my Samsung Express and my Z2.
I set them up correctly....sender/reciever.
I enter the code generated by reciever phone to the sender phone.
The sender says connecting. I get an "accept" message on the reciever phone (Z2)
Then the sender phone (Samsung) says " could not pair. Try again later".
I have ....6 times!

Hi and welcome to the community! Since you're new please be sure that you have checked out our Discussion guidelines.
Have you tried to restart both devices?
Does Bluetooth work fine otherwise in your old device?
If you can't pair the devices you could use Xperia transfer in PC Companion instead:
http://www.sonymobile.com/global-en/tools/pc-companion/
What are your thoughts about this forum? Let us know by doing this short survey.

I'm getting this error message: "iTunes could not connect to this iPad. Could not save the pairing record."

My iPad wont turn off completely, nor will it boot up, it just keeps thinking about it. Pretty sure my kids ran up all the memory, and I tried connecting it to iMac to dump pictures, but it only lets me get through it half way, and continues to reboot and gives me through iTunes the error message that it could not save the pairing record?

Disconnect it and restart your iMac and try again.

BH104 & Nokia 6300 could not be paired

Similar Messages

Maybe you are looking for