BH501 stereo Bluetooth headset - v/poor sound

I have paired the Nokia headset with a Bluetake USB Bluetooth adapter and eventually obtained the stereo music through the headset.
The music played as good quality sound, though it was interrupted every 15 or 20 seconds even though I was sitting only 4 feet from the PC!
Then when I moved out of the room the music stopped completely.
Now it is difficult to reconnect the device even though I am again only 4 feet from the PC. When it does reconnect the music quality is very poor and also while the Status shows the signal is Good, the Activity is not changing at all!
I have updated the drivers and software for the USB adapter with no change in the sound.
Please can you tell me how to reconnect to this device with full data flow and the previous high quality music?
Thank-you
Nigel

I think it is a symptom of the information and knowledge at the user level with Bluetooth.
Not something which the user can be responsible for but the only Bluetooth documentation I have found is highly technical documents and lengthy specification and agreements.
The device documentation is as usual lamentably small and gives no information above basic.
In this particular question I found, because of lack of clear info, I was using the Headset service and should have used the AV service which gave a much improved quality.
Thanks
Nigel

Similar Messages

  • Want to separate Stereo bluetooth headset profile ...

    Hi;
    I used to have in my windows mobile phone two profiles for my Jabra bt3030 stereo headset.
    -(stereo headset profile)  to be selected if I wanna listen to music.
    -(headphone profile) to be used during my working day as normal bluetooth headset to answer calls only (however all ringtons/alerts/GPS navigation sounds been forwarded to the internal phone speaker)
    In my Nokia E72 ,  firmware  031.023 . I have only stereo bluetooth headset profile. which make me always put on the headset during working days to be able to listen to the calender alerts, and notifications (as they do not go to the internal speaker).
    Would you please guide me how to separately use either stereo headset profile (for music) or bluetooth headphone profile (for the calls only)???
    Thanks  

    This problem is getting me down - Blue Jay headphones work perfectly with every other device and computer we own but cannot be found by our MB Pro (late 2011).  This same MB is very difficult to pair with 2 other Bluetooth devices - taking several attempts each time and providing poor sound quality.

  • THE PERFECT Stereo Bluetooth HEADSET for my E51

    My E51 is in dire need of GREAT BLUETOOTH STEREO HEADPHONES. As u may know, the OEM headset simply sucks in terms of sound quality and comfort (keeps dropping off).
    Please share ur experience in using stereo bluetooth headsets that PAIR SEAMLESSLY to Nokia E51 with rating on:
    - Comfort in using (> 2 hours non stop)
    - Pairing ease & range
    - Musical sound quality (bass treble richness)
    - Conversation sound quality and clarity (inc. talk time)
    - Model (in ear, earbud etc)
    - Price (pref in USD currency)
    I think this post should be kept ALIVE as referral for future users who are thinking the same as I am now
    PEACE!
    Message Edited by e51lover on 31-Jan-2008 02:54 AM

    There isn't any - iPhone simply don't work proberly with a bluetooth headset.

  • Jabra Halo stereo bluetooth headset skipping with IPAD...

    Hi, does anybody here have ever used a Jabra Halo Bluetooth Headset with an IPAD or Iphone? I just recently bought this device and paired with my IPAD and iphone 3gs, and I'm very disappointed, sound quality is great, but the audio keeps skipping every once in awhile, very annoying especially if watching a video or listing to podcasts, perhaps there's a setting that I have missed? any advise would be very helpful, My firmware by the way is ios 4.2 thanks...

    To be clear this is NOT an issue with Stereo Bluetooth headsets, it is a problem with the chipset in Apple's iPhone and iPad.
    Prior to the iPhone 3 I had a T-Mobile Dash with stereo bluetooth and it worked beautifully. When I got the iPhone 3 the bluetooth was a disaster with skipping and dropping the connection.
    I eventually went over to a Sprint EVO and the stereo bluetooth paired with my $300 Nokia noise canceling headphones was awe inspiring. I purchased an iPhone 4 and it arrived yesterday. Today I listened to those same headphones and got skipping and it even unpaired for no reason at all.
    The issue with the iPhone 4 seems to be that when the screen is active there is no problem. However, when you lock the screen it starts skipping.
    So, I just wanted to point out that stereo bluetooth has been broken on the iPhone for at least two generations and apparently on the iPad too which is extremely disappointing. It's not the headset mfg, its Apple.

  • Is there a stereo bluetooth headset that can pair with more than one device at a time?

    Is there a stereo bluetooth headset that can pair, i.e. multipoint, with more than one device at a time?
    Are the MacBook and iPhone 4 capable of multipoint bluetooth technoloagy?
    The goal is for my wife to be able to watch her Korean TV soap operas on her MacBook and still receive a call on her iPhone 4 via a stereo bluetooth headset.
    I was looking at the Motorola S10-HD but after further review saw that it only pairs with one device at a time.
    Appreciate any and all input. My Googling has returned no results.
    Rick

    TeslasBB wrote:
    pairing my BB8330 with my blue tooth earphone(TM:jawbone) and my microsoft sync thats in my car simultaneously? if i pair with the car, will i have to pair my jawbone all over again?
    You can only pair one device at a time to your 8330, or any other phone for that matter.  The "pairings" are saved to the phone, you can use one or the other and you won't have to pair it again.  Once you turn your bluetooth device on and the phone is on, they will find each other again.
    Hope this helps,
    John
    Stevie Ray! 1954-1990
    ** Don't forget to resolve your post with the accepted solution.

  • Byte Corseca BT Stereo bluetooth Headset Not working in windows 8.1

    Hi
    I m using Byte Corseca BT Stereo bluetooth Headset its working fine in windows 8 . when i get update from microsoft windows 8.1 its not working ..Please any one give me the solution.
    Thanks in Advance
    Ramesh M

    what is your laptop model?
    update your Bluetooth driver, in order to work with Windows 8.1 your Bluetooth driver need to be updated
    you can find updated driver from your manufactured site. I this Bluetooth comes with software, try to reinstall it
    Please also check if there is any important update driver for your laptop

  • Stereo Bluetooth headset

    My plantronics pulsar 590A stereo bluetooth headset does not work properly with the iPhone. It works to answer calls but does not work to listen to music. It works with all other cell phones for music. What's the deal?

    your headphones use a protocol for streaming stereo music that is not supported by the iphone I believe. I bet it gets added but right now it cant do stereo music thru bluetooth.
    <edited by host - see [url=http://discussions.apple.com/help.jspa#terms]Terms of Use, section 2.6.3[/url]>

  • Palm Centro Stereo Bluetooth Headset

    Is it possible to listen to music using a Stereo Bluetooth headset?  I am currently using Pocket Tunes and a Sony Ericsson HBH-DS980 headset.   The headset works with the phone just fine.   I can not seem to get it to work listening to my eBooks using PTunes.
    Post relates to: Centro (AT&T)

    your headphones use a protocol for streaming stereo music that is not supported by the iphone I believe. I bet it gets added but right now it cant do stereo music thru bluetooth.
    <edited by host - see [url=http://discussions.apple.com/help.jspa#terms]Terms of Use, section 2.6.3[/url]>

  • What is the best stereo bluetooth headset for iphone 3gs? or 3.0 version??

    i would like to know the best compatible stereo bluetooth headset for my iphone 3gs.. since apple didn't release one.. any 3rd party headset MODEL will do.. hoping for your response..
    ps.. nokia, sony ericsson, motorola, samsung devices are included with the "3rd party devices" thanks!!! =D

    There isn't any - iPhone simply don't work proberly with a bluetooth headset.

  • Which Stereo Bluetooth headset with remote supports for Iphone3Gs??

    please anybody can tell me which is the best Stereo Bluetooth headset with remote support for Iphone3Gs??
    thanks in advance

    Hello thomulusmax,
    Welcome to the BlackBerry Support Community Forums
    As long as your device is running software version 4.2.2 or higher it supports A2DP. (You can verify this under Options >> About)
    Keep in mind that not all Bluetooth headsets are A2DP enabled. As long as your headset supports A2DP and it pairs and connects with your Pearl you should be able to listen to any supported audio format.
    Cheers!
    Message Edited by FozzyBear on 08-21-2009 02:32 PM
    -FB
    Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
    Be sure to click Kudos! for those who have helped you.
    Click "Accept as a Solution" for posts that have solved your issue(s)!

  • IPhone stereo bluetooth headset support?

    My Sony DS970 works fine in telephone mode, but it won't work in stereo bluetooth mode. it's odd to be on a phone call working fine on the headset, then turn on the music or sounds and have that jump out of the speaker. Pretty annoying that we have to deal with a custom-sized headphone adapter AND a bluetooth transmitted that's disabled. I have a portable bluetooth transmitter, but it won't fit in the headphone jack. Wow -- I knew the Zune made some mistakes around bluetooth, but this one seems ridiculous.
    Is it a possible software patch? Can the hardware support A2DP? Are there any plans to support bluetooth audio moving forward?
    ANY answers would be most welcome even if the answer is "Go away we aren't going to support that until the next phone." I just wanto to know if it's broken, disabled, fixable, or what?
    I prefer real answers to rampant speculation, but I'll probably get more of the latter than the former, which can be expected.

    My Sony DS970 works fine in telephone mode, but it
    won't work in stereo bluetooth mode. it's odd to be
    on a phone call working fine on the headset, then
    turn on the music or sounds and have that jump out of
    the speaker. Pretty annoying that we have to deal
    with a custom-sized headphone adapter AND a bluetooth
    transmitted that's disabled. I have a portable
    bluetooth transmitter, but it won't fit in the
    headphone jack. Wow -- I knew the Zune made some
    mistakes around bluetooth, but this one seems
    ridiculous.
    Is it a possible software patch? Can the hardware
    support A2DP? Are there any plans to support
    bluetooth audio moving forward?
    ANY answers would be most welcome even if the answer
    is "Go away we aren't going to support that until the
    next phone." I just wanto to know if it's broken,
    disabled, fixable, or what?
    I prefer real answers to rampant speculation, but
    I'll probably get more of the latter than the former,
    which can be expected.
    Many people believe apple left A2DP support off so as they may make the only devices to do this. So the market is only flooded with their devices. A2DP should be a software thing but dont quote me on that.

  • 6682 and bluetooth headset with no sound - Here's ...

    Hello,
    I had an 'no sound' issue with a 6682 and a Jabra BT250 bluetooth headset. I've had the phone for 2 months and used the BT250 with it every day.
    My problem started when I connected a POP connector and wired headset (not the standard Nokia version). From that point forward, when I connect my bluetooth headset all of the correct icons appear on the phone showing the BT headset is connected and the bluetooth connection is functioning, but the sound does not come out of the headset. It comes out of the handset (like a normal call) instead.
    I searched through the forum and found this procedure listed for the N70 and other headsets.
    - Take out the battery
    - Take out your sim
    - Leave it for at least 2 hours
    - Put another SIM into it
    I'm adding these steps
    - Turn on the phone
    - If prompted, enter the correct time and date
    - Pair the headset with the phone
    - The headset should now work correctly
    - Power down the phone and replace the borrowed SIM card with your own.
    - Pair the headset with the phone.
    - The bluetooth headset should now work correctly.
    This procedure correected my problem. A thorough cleaning of the connector contacts did not help.
    I hope this helps someone else.

    Did you ever figure out how to use the headset? I am having the same problem

  • Best Stereo Bluetooth Headset for N73ME ?

    Would appreciate any advice on what users think is the best bluetooth stereo headset for the N73ME.

    There isn't any - iPhone simply don't work proberly with a bluetooth headset.

  • How do make stereo bluetooth headset works with iMac desktop?

    My bluetooth stereo headset works perfect with my iPhone4 and my iPad, but can't be discovered by my iMac.  What gives?  What do I have to do to make it work?

    Do you have the headset in discovery mode?
    You might want to google your headset model and maybe OS X pair. Find out of others have had problems.

  • Nokia 3110C bluetooth headset trouble (bad sound)

    I just updated my phone from software version 5.50 to 6.60 to solve the echo problem that occasionally occurred.
    Ok the first problem seems to be solved but now I noticed that the outgoing sound from my headset ( I tried 2 different headsets ) is distorted. I made a comparison with my old 6021 and it is a huge difference. The 6021 sounds much better then the 3110C with the headsets. It looks like the 3110C is gaining the signal to much.
    Are there more users who experience this problem?
    Message Edited by nico_be on 14-Aug-2008 02:05 PM

    I think it is a symptom of the information and knowledge at the user level with Bluetooth.
    Not something which the user can be responsible for but the only Bluetooth documentation I have found is highly technical documents and lengthy specification and agreements.
    The device documentation is as usual lamentably small and gives no information above basic.
    In this particular question I found, because of lack of clear info, I was using the Headset service and should have used the AV service which gave a much improved quality.
    Thanks
    Nigel

Maybe you are looking for

  • Music in itunes from different cd's, how can i get it to have correct info?

    1.  I have over 2000 songs in itunes from different mixed cd's, how can I get them to have correct artist and album and titles? 2.  How can I convert them all to mp3 because I have to be able to send them to windows media player because I have mp3 pl

  • Discoverer Plus - New parameter creation

    On a worksheet in Discoverer Plus, when I click on Parameters and then click on New it throws an error: An error occurred while attempting to perform the operation. The operation did not complete successfully. Extra Internal Info (OLException Cause:

  • Error creating DRAFT of sales order DTW

    Dear Experts Im facing the next issue, im trying to import a DRAFT from sales order in DTW, this DRAFT is with List of materials, but when running the import process the next error messages appears: 1470000840 - Incorrect "Qty (Inventory UoM)" in lin

  • Server giving me error 500 on all apps

    I am able to get into the console and manage everything, but everytime I try to hit any web app (e.g., http://server1:7001/shop or https://server1:7002/drive) I receive the following error: Error 500--Internal Server Error Does anyone have an idea wh

  • How can I set RSBBS back to the mode 3.X

    Hi.experts:     I found that if i use RSBBS to go back to R/3 for details,when I'm in analyzer,then the system jump to my portal for R/3 interface,but I just want to logon to the SAP GUI for detials,how to achieve that? Best Regards Martin Xie