BI 40 Installation SP1

We've installed BI 4.0 SP1 GA for Business Objects Enterprise with full installation. However, we have found at least over 10 services not installed. We have to add the missing services in CMC. In previous versions, with full installation, the complete set of available services are installed by default. Is this a feature of BI4.0, or is this an issue with the install? We have other servers waiting to be installed, but are waiting for this to be claified in case we have to reinstall due to installation issues. Thank you in advance for your response.

Hi Chan,
please write your total BO environment like OS, Database and web application server

Similar Messages

Installation of Operations Manager 2012 R2 along with 2012

Hi,
I have an existing SCOM infra (Single SCOM server with version System Center Operations Manager 2012 (7.0.8560.0) )
Now I want to deploy SCOM 2012 R2 in 2 servers (Management server, operation console, web console ) on both the machines for high availability.
My question is - Is it possible to deploy the SCOM 2012 R2 in the existing infrastructure without installation SP1 or any cumulative update on the present server? Since I want to setup the SCOM 2012 R2 on 2 new machines, is it possible to go ahead without
in place upgrade or do I need to demote the existing SCOM 2012 and then freshly install SCOM 2012 R2?
Please suggest the best way to move from SCOM 2012 Single server to SCOM 2012 R2 on 2 new machines.
Thanks in Advance, Any quick help highly appreciated.
Best Regards
Krishnakumar B
Thanks & Regards Krishnakumar B

Hi,
If you want to upgrade Distributed Management Group, then each management server must be upgraded.
Please go through the below links for Distributed Deployment of Operations Manager:
http://technet.microsoft.com/en-us/library/hh298610.aspx
The below link is about how to Upgrade Distributed Management Group to Operations Manager 2012 SP1:
http://dynamicdatacenter.wordpress.com/2013/01/09/upgrade-distributed-management-group-to-operations-manager-2012-sp1/
Please Note: Since the web site is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this information.
Regards,
Yan Li
Regards, Yan Li

After installing Project Server 2013 (without updating SharePoint Server 2013 SP1))

I am facing the problem while opening project web app. I configured the SharePoint 2013 and project server 2013. Here is the detail what I performed the steps:
OS Server 2012 R2, SQL Server 2012, SharePoint server 2013 version
15.0.4420.1017, Project Server 2013 version
15.0.4454.1000. SharePoint configured and running successfully. After project web app site provisioning successfully completed. I got the below error.
Microsoft.Office.Project.PWA.WebParts.PWAPart' from assembly 'Microsoft.Office.Project.Server.PWA, Version=15.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c' cannot reduce access.
I run this psconfig -cmd upgrade -inplace b2b -wait -force. But still getting same error.
Previous steps:
Earlier I had also tried to install SharePoint Server 2013 SP1 "3823428". After the installation SP1 some of sharePoint site features suddenly stopped e.g: Cannot browse "Service Applications -->
Manage service applications" option even after re-start the server. This was previous error after upgrading SP1
"Method 'get_IsClientValid' in type 'Microsoft.SharePoint.WorkflowServices.WorkflowServiceApplicationProxy' from assembly 'Microsoft.SharePoint.WorkflowServices,
Version=15.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c' does not have an implementation"
Anyone can help me!!! Thanks...
Faisal Numan

hello,
For SP2013 and PS2013 to work properly on Windows Server 2012 R2 you need to use the SP1 install media for both, download SharePoint 2013 with SP1 and Project Server 2013 with SP1
http://support.microsoft.com/kb/2891274
http://blogs.technet.com/b/office_sustained_engineering/archive/2014/03/03/announcing-availability-of-slipstreamed-office-2013-and-sharepoint-server-2013-with-sp1.aspx
http://blogs.technet.com/b/projectsupport/archive/2014/02/25/project-2013-and-project-server-2013-service-pack-1.aspx
Paul
Paul Mather | Twitter |
http://pwmather.wordpress.com | CPS

What files to Download for W7 SP1?

Hello,
SP1 is not to see in Windows Update, so go to the Update Central. Okay.
Nice description how to do. But wrong words?
On the final download page there are not only a 32-bit and 64 bit version, there are 10 files:
7601.17514.101119-1850_Update_Sp_Wave1-GRMSP1.1_DVD.iso 1953.3MBHerunterladen:
Windows_Win7SP1.7601.17514.101119-1850.AMD64CHK.Symbols.msi 262.7MBHerunterladen:
Windows_Win7SP1.7601.17514.101119-1850.AMD64FRE.Symbols.msi 287.8MBHerunterladen:
Windows_Win7SP1.7601.17514.101119-1850.IA64CHK.Symbols.msi 241.8MBHerunterladen:
Windows_Win7SP1.7601.17514.101119-1850.IA64FRE.Symbols.msi 193.4MBHerunterladen:
Windows_Win7SP1.7601.17514.101119-1850.X86CHK.Symbols.msi 294.5MBHerunterladen:
Windows_Win7SP1.7601.17514.101119-1850.X86FRE.Symbols.msi 330.6MBHerunterladen:
windows6.1-KB976932-IA64.exe 511.6MBHerunterladen:
windows6.1-KB976932-X64.exe 903.2MBHerunterladen:
windows6.1-KB976932-X86.exe 537.8MB
Okay, the SP should be 4100MB.
Which of these 10 files has 4100MB?
What is the difference beween Win7SP1 and Windows6.1?
I just followed only the link "Windows 7 Service Pack - Download"
Thanks
--- Cheers Detlef

Bob is right.
Other information:
1
7601.17514.101119-1850_Update_Sp_Wave1-GRMSP1.1_DVD.iso
This DVD image contains standalone update for all architectures.
2 windows6.1-KB976932-X86.exe
This application installs Sp1 to a 32-bit machine running Windows 7.
3
windows6.1-KB976932-X64.exe
This application installs Sp1 to a 64-bit machine running Windows 7 or Windows Server 2008 R2.
4 windows6.1-KB976932-IA64.exe
This application installs Sp1 to an Itanium 64-bit Windows Server 2008 R2.
5 Windows_Win7SP1.7601.17514.101119-1850.X86FRE.Symbols.msi
Standalone debugging symbols (free) for 32-bit machines.
6 Windows_Win7SP1.7601.17514.101119-1850.X86CHK.Symbols.msi
Standalone debugging symbols (checked) for 32-bit machines.
7 Windows_Win7SP1.7601.17514.101119-1850.AMD64FRE.Symbols.msi
Standalone debugging symbols (free) for 64-bit machines. This contains debugging symbols for both Windows 7 SP1 and Windows Server 2008 R2
SP1.
8 Windows_Win7SP1.7601.17514.101119-1850.AMD64CHK.Symbols.msi
Standalone debugging symbols (checked) for 64-bit machines. This contains debugging symbols for both Windows 7 SP1 and Windows Server 2008
R2 SP1.
9 Windows_Win7SP1.7601.17514.101119-1850.IA64FRE.Symbols.msi
Standalone debugging symbols (free) for Itanium 64-bit machines.
10 Windows_Win7SP1.7601.17514.101119-1850.IA64CHK.Symbols.msi
Standalone debugging symbols (checked) for Itanium 64-bit machines.
Regards,
Leo
Huang
TechNet
Subscriber Support in forum. If you have any feedback on our support, please contact
[email protected]
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Testing Coldfusion Applications

Hello,
I've recently overtaken a large testing project of a
financial solution developed in Coldfusion MX. Currently there is a
large mass of code with one off directories and orphaned files
linking to other places and I have no idea how to generate a
diagram of all this Coldfusion code. Are there any tools written by
Adobe or on SourceForge that can aid me in this? I'm using
CFEclipse right now.
Thanks,
Christopher

Thank you for your responses. I resolved the problem with a
silent installation (sp1 reinstallation did not work for me).
I found a web page described exactly the same problem with
possible solutions. I attached a link here fyi.
http://www.robgonda.com/blog/index.cfm/2006/8/7/CFMX7--W2k3sp1--Access-is-denied
I'm setting up dreamweaver - cfusion to do some application
development testing. Thanks again.

Which windows works for Bootcamp?

Can I use this version of windows for bootcamp? http://www.ebay.com/itm/Microsoft-Windows-7-Professional-64bit-Full-Installation -SP1-/220954244404?pt=US_Operating_Systems_Software&hash=item3371e63534

According to the "Boot Camp User Guide" -http://manuals.info.apple.com/en/boot_camp_install-setup_10.6.pdf. it suggested it will work with:
- Windows XP Home Edition or Professional
- Windows Vista Home Basic, Home Premium, Business, or Ultimate
- Windows 7 Home Premium, Professional or Ultimate

CRM 7.0 installation failed on Windows 2008 R2 SQL Server 2008 SP1

Hello I'm currently trying to install CRM 7.0 on a windows 2008 R2 (64B) plateform with SQL Server 2008 SP1 as database engine
while launching sapinst.exe i'm facing this issue that i cannot get rid of it
Could someone Help , would really be appreciated as i'm a newby on SAP world
thanks a lot
Unable to start a service execution. Please check the following information for the possibble reason and inform the installation development : Opened sylib701_1.dll exe dir is C:/Users/SAPINS1/AppData/Local/Temp/2/sapinst_exe.3492.1286357336 Opened C:/Users/SAPINS1/AppData/Local/Temp/2/sapinst_exe.3492.1286357336/iaguieng701_1.dll receiving and sending on port 21200 Environment variable SAPINST_JRE_HOME set to value 'C:/Users/SAPINS1/AppData/Local/Temp/2/sapinst_exe.3492.1286357336/jre'. exe dir is C:/Users/SAPINS1/AppData/Local/Temp/2/sapinst_exe.3492.1286357336 Creating file C:\Program Files\sapinst_instdir\x. Removing file C:\Program Files\sapinst_instdir\x. Opened C:/Users/SAPINS~1/AppData/Local/Temp/2/sapinst_exe.3492.1286357336/iakdblib701_1.dll This is SAPinst, version 701_1, make variant 701_REL, build 1015514 compiled on Oct 3 2008, 01:51:15 MessageLib initialized successfully. showing dlg diProductChoice <dialog sid="diProductChoice"> <title>Welcome to SAP Installation Master</title> <dialog/> Login in progress Connection request to guiengine backend by host 169.254.138.68 Protocol version is 3.1 Send connect information client logged on Waiting for an answer from GUI CDialogHandler: ACTION_NEXT requested <dialog sid="diProductChoice"> <dialog/> Creating file C:\Windows\System32\x. Removing file C:\Windows\System32\x. showing dlg diRestartOrCancel <dialog sid="diRestartOrCancel"> Dialog does not contain standard input handler, so the backend is not able to generate a log entry <dialog/> Waiting for an answer from GUI current working directory is C:/Windows/System32 Creating file C:\Program Files\sapinst_instdir\x. Removing file C:\Program Files\sapinst_instdir\x. Unable to open URL file://C:\Windows\System32\control.xml. The execution will be terminated now.

Hi!
Windows 2008 R2 is not yet listed in the PAM - and hence not yet supported. The technical prerequisites are met (with a special kernel patch) but not all software is released, so you may get it to run technically but not everything is tested and so, you should not install any SAP system on it!
In fact, and just to provide you further details it is not possible to expect the 710 products released for Windows Server 2008 R2 before around four weeks; 700 products will be released even after 710.
See [SAP note 1383873|https://service.sap.com/sap/support/notes/1383873] ("Windows Server 2008 R2 Support").
You can be always up to date with the latest Windows news at:
[SAP on Microsoft Windows|SAP on Microsoft Windows] --> Support of Microsoft Windows Server 2008 R2
Cheers!

CS4 MASTER COLLECTION installation problem on VISTA SP1

whenever i try to install CS$ MASTER COLLECTION on VISTA it shows me the following message. . .
http://img132.imageshack.us/my.php?image=83377733oh8.jpg
any solutions? plz help me...........

I get the same problem - any solution yet?
CS4 programs crash at Startup so I unistalled it plus CS4Clease and MS Clean Installer as advised in forums.
only to find the problem is still not fixed
when installing a
Warning message at install stating cs4 minimum system requirements are not met (this did not appear the first time I installed the program)
http://img132.imageshack.us/my.php?image=83377733oh8.jpg
where as CS4 worked for several months, before the error occured
this is the only warning
it then installs CS4 no problem.
after install
Photoshop and Dreamweaver run but the rest of the packages including inDesign do not - they all crash on startup - continously
I have searched the forums endlessly with no avail.
Would a vista update have stopped CS4 from recognising or identifing the OS, thus causing the program to initially crash?
Vista Home Premium SP1, 32bit, Toshiba Qosmio F50, Intel Core 2 Duo P8400 2.26GHZ
please advise

System Center Virtual Machine Manager SC VMM 2012 SP1 Installation fails: Unable to assign the name NO_PARAM to this host because this name is already in use.

I'm trying to install VMM 2012 SP1 on a Windows Server 2012 machine and it fails with this error,
the scenario is as follows,
Old database (from 2012 RTM) exists on remote SQL 2012 SP1 server
Server was 2008 R2 SP1 so I decided to make a fresh installation of 2012 with the same name
installed ADK
specific error: 01:42:13:VMMPostinstallProcessor threw an exception: Threw Exception.Type: Microsoft.VirtualManager.Setup.Exceptions.BackEndErrorException, Exception.Message: Unable to assign the name NO_PARAM to this host because this name is already in
use.
please help

I had a similar problem today when upgrading from SCVMM 2012 RTM to SCVMM 2012 SP1 RTM. To re-create the issue you describe originally you can actually just uninstall SCVMM 2012 SP1 RTM with "retain data" option and re-install the software on the same
computer (with the same name of course), attaching it to the retained DB. If you change the SCVMM server name I believe it will make some things go wrong after your install, like missing VM template passwords for example as the data gets encrypted in
the DB. Maybe it didn't but I didn't risk it. I definitely know if you change service accounts on a scenario like this you will be without the encrypted DB data which isn't much fun. To avoid changing the computer name, if you look in the setup log
files in %systemdrive%\ProgramData\VMMLogs\, specifically the SetupWizard.log file. You will see details on it failing because the same computer name is in the DB table "dbo.tbl_ADHC_AgentServer" and until it is removed from that table I wasn't able to get
the install to complete at all. The error in my logs looked something like this "InnerException.Type: System.Data.SqlClient.SqlException, InnerException.Message: Violation of UNIQUE KEY constraint 'unique_ADHC_AgentServer_ComputerName'. Cannot insert duplicate
key in object 'dbo.tbl_ADHC_AgentServer'. The duplicate key value is (computername.is.writtenhere). The statement has been terminated." In the row data in the DB it also seems to suggest that the computer name had "Virtual Machine Manager Library Files" on
it which is strange since I always remove the local SCVMM server as a library server after I install it and use an off box library server.

Problem installing SQL Server 2012 SP1: "managed sql server installer has stopped working"

Hello,
I have a big problem.
I just downloaded SQL Server 2012 SP1 and I only want to install SSMS. The installer always crashes with an error message "managed sql server installer has stopped working".
I already tried all solutions from Google for this problem but nothing works.
Can someone help me plase?
My System: Window 8 Pro with Visual Studio 2012.
Thanks
Sven

Would you please uplaod/share SQL Server setup logs
C:\Program
Files\Microsoft
SQL Server\110\Setup
Bootstrap\Log\20130125_133342
to file sharing service like SkyDrive.com
FAQ
Regards,
Ahmed Ibrahim
SQL Server Setup Team
My Blog
This posting is provided "AS IS" with no warranties, and confers no rights. Please remember to click
"Mark as Answer" and "Vote as Helpful"
on posts that help you.
This can be beneficial to other community members reading the thread.

SQL Server 2008 Express SP1 installation failed

Hello guys,
System Info:
Windows 7 64Bit.
Scenario: I have an application, while installation it installs SQLServer 2008 instance with some xyz database name.
Issue: The system already has the SQLServer 2008 R2, and now I am trying to install the application but the SQLServer instance of my application is not getting installed, its giving error saying that the installation failed.
The error code is :
0x84B40000
The below is the log file data.
07/07/2014 16:15:14.283 ======================================================================
07/07/2014 16:15:14.283 Setup launched
07/07/2014 16:15:14.298 Attempting to determine media source
07/07/2014 16:15:14.298 Media source value not specified on command line argument.
07/07/2014 16:15:14.298 Setup is launched from media directly so default the value to the current folder.
07/07/2014 16:15:14.298 Media source: c:\80424454fe36892978\
07/07/2014 16:15:14.298 Attempt to determine media layout based on file 'c:\80424454fe36892978\mediainfo.xml'.
07/07/2014 16:15:14.361 Media layout is detected as: Core
07/07/2014 16:15:14.361 Media LCID is detected as: 1033
07/07/2014 16:15:14.361 Media is a slipstream package
07/07/2014 16:15:14.361 Only patch related actions can run patch setup.exe, so continuing to run setup.exe from media.
07/07/2014 16:15:14.361 /? or /HELP or /ACTION=HELP specified: false
07/07/2014 16:15:14.361 Help display: false
07/07/2014 16:15:14.361 Checking to see if we need to install .Net version 2.0
07/07/2014 16:15:14.376 Determining the cluster status of the local machine.
07/07/2014 16:15:14.376 The local machine is not configured as a cluster node.
07/07/2014 16:15:14.376 Attempting to find media for .Net version 2.0
07/07/2014 16:15:14.376 .Net version 2.0 is installed
07/07/2014 16:15:14.376 RedistMSI::GetExpectedBuildRevision - Setup expects MSI 4.5.6001.22159 at the minimum
07/07/2014 16:15:14.376 Attempting to get Windows Installer version
07/07/2014 16:15:14.376 Windows Installer version detected: 5.0.7601.17807
07/07/2014 16:15:14.376 RedistMSI::IsVistaRTM - Not Vista RTM build
07/07/2014 16:15:14.392 Required version of Windows Installer is already installed
07/07/2014 16:15:14.392 Current running setup.exe full path: c:\80424454fe36892978\setup.exe
07/07/2014 16:15:14.392 Media setup.exe file version detected: 2007.100.2731.23
07/07/2014 16:15:14.392 Locally installed setup.exe full path: c:\Program Files (x86)\Microsoft SQL Server\100\Setup Bootstrap\Release\setup.exe
07/07/2014 16:15:14.408 Local setup.exe file version detected: 2007.100.2731.23
07/07/2014 16:15:14.408 Local setup.exe version 2007.100.2731.23 is equal or greater than media version 2007.100.2731.23, so re-launching setup.exe from local
07/07/2014 16:15:14.408 Media source: c:\80424454fe36892978\
07/07/2014 16:15:14.408 Install media path: c:\80424454fe36892978\x86\setup\
07/07/2014 16:15:14.423 Media layout: Core
07/07/2014 16:15:14.423 Attempting to get execution timestamp
07/07/2014 16:15:14.423 Timestamp: 20140707_161514
07/07/2014 16:15:14.439 Attempting to launch local setup.exe
07/07/2014 16:15:14.439 Attempting to launch process c:\Program Files (x86)\Microsoft SQL Server\100\Setup Bootstrap\Release\setup.exe
07/07/2014 16:15:38.962 Process returned exit code: 0x84B40000
07/07/2014 16:15:38.962 Local setup.exe returned exit code: 0x84B40000
07/07/2014 16:15:38.962 Setup closed with exit code: 0x84C40013
07/07/2014 16:15:38.962 ======================================================================
Please do reply if anyone knows how to fix this issue.
Thanks,
Shiv
0x84B40000

Hi,
You can install SQL server express 2008 on machine having SQL Server 2008 r2 is supported. From what you posted I guess SQL server 2008 r2 is default instance so you need to install SQL server 2008 express SP1 as named instance. Your error matches problem
mentioned in below thread
http://social.msdn.microsoft.com/Forums/sqlserver/en-US/1e8cfab3-4b99-4b4d-82bf-97799dabe34c/failure-when-installing-from-command-prompt-config-file?forum=sqlexpress
If issue is not solved please post complete log files from location
%programfiles%\Microsoft SQL Server\100\Setup Bootstrap\Log\.
Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it.
My TechNet Wiki Articles

Exchange 2013 SP1 Installation Errors I Cannot Resolve

Good Afternoon All -
Note: I updated this post an hour after posting. Still no solution, but please see updated info at end of this post)
I'm trying to introduce Exchange into an existing, small environment. The server I'm trying to install it onto is an SBS 2011 server (single server.) Even though SBS comes with Exchange, I found out that it's installation was corrupted and someone
had attempted to uninstall it before. Yes, it's being installed onto a server with a DC. I considered creating a Hyper-V VM on the server for Exchange, but thought it may be better to try to install directly onto server instead.
Before I started, I made sure all Exchange data had been removed. I checked for and deleted (if present) all Exchange-related objects in ADSI, ADU&C, files, and registry entries.
When I try to install Exchange 2013 SP1, I get the below errors. I know that some are easily resolved by installing pre-requisites - however - others aren't - especially the pending reboot one. I've restarted the server many times when making
changes or applying various updates and still get flagged to restart during installation. I've tried the SBS 2011 repair disc as well, but had many issues with it. In all honesty, the whole server needs to be wiped and re-installed, but
cannot do at this point.
Besides the errors below, I've zipped up the ExchangeSetupLogs folder and placed them in the link below. Also below are system specs. The only edit I made in them is a find/replace for server and domain name.
ExchangeSetupLogs Folder
System Specs
Xeon E31270 3.4Ghz
16gb RAM
Windows Server 2011 SBS x64 (Domain Controller Role Installed & Used)
C:\ - RAID 1 = 500gb
D:\ - SATA HDD = 320gb
E:\ - SATA HDD = 320GB
Should I perhaps try to install to a VM on the server or think that would use too many unnecessary resources?
Any help would be appreciated - Thanks!
Error:
This computer requires the update described in Microsoft Knowledge Base article KB2619234 (http://go.microsoft.com/fwlink/?LinkId=262359).
Without this update, the Outlook Anywhere feature may not work reliably.
For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.Win7RpcHttpAssocCookieGuidUpdateNotInstalled.aspx
Error:
There is a pending reboot from a previous installation of a Windows Server role or feature. Please restart the computer and then
run Setup again.
For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.PendingRebootWindowsComponents.aspx
Error:
The Windows component RSAT-Clustering isn't installed on this computer and needs to be installed before Exchange Setup can begin.
For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.RsatClusteringInstalled.aspx
Error:
This computer requires the Microsoft Unified Communications Managed API 4.0, Core Runtime 64-bit. Please install the software from
http://go.microsoft.com/fwlink/?LinkId=260990.
For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.UcmaRedistMsi.aspx
Error:
An unsupported operating system was detected. Exchange Server 2013 Client Access, Mailbox, and Edge Transport server roles support
Windows Server 2008 R2 SP1 or later and Windows Server 2012.
For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.ValidOSVersion.aspx
Warning:
Installing Exchange Server on a domain controller will elevate the permissions for Exchange Trusted Subsystem to domain administrators.
For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.WarningInstallExchangeRolesOnDomainController.aspx
Warning:
Setup will prepare the organization for Exchange 2013 by using 'Setup /PrepareAD'. No Exchange 2007 server roles have been detected
in this topology. After this operation, you will not be able to install any Exchange 2007 servers.
For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.NoE12ServerWarning.aspx
Warning:
Setup will prepare the organization for Exchange 2013 by using 'Setup /PrepareAD'. No Exchange 2010 server roles have been detected
in this topology. After this operation, you will not be able to install any Exchange 2010 servers.
For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.NoE14ServerWarning.aspx
Ben K.
UPDATE
I just tried fixing a few things and tried again. Still no luck. Below is what I changed as well as the errors received. Only option was Retry. Can I just not install it onto this environment?
What I Changed
Installed Unified Comm Managed API 4.0 (Required Uninstalling Speech Analysis app before it would install)
Installed KB2619234 for Outlook Anywhere
Installed 12 updates - Server fully patched
Exchange Setup Errors
Error:
An unsupported operating system was detected. Exchange Server 2013 Client Access, Mailbox, and Edge Transport server roles support
Windows Server 2008 R2 SP1 or later and Windows Server 2012.
For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.ValidOSVersion.aspx
Warning:
Installing Exchange Server on a domain controller will elevate the permissions for Exchange Trusted Subsystem to domain administrators.
For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.WarningInstallExchangeRolesOnDomainController.aspx
Warning:
Setup will prepare the organization for Exchange 2013 by using 'Setup /PrepareAD'. No Exchange 2007 server roles have been detected
in this topology. After this operation, you will not be able to install any Exchange 2007 servers.
For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.NoE12ServerWarning.aspx
Warning:
Setup will prepare the organization for Exchange 2013 by using 'Setup /PrepareAD'. No Exchange 2010 server roles have been detected
in this topology. After this operation, you will not be able to install any Exchange 2010 servers.
For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.NoE14ServerWarning.aspx
Thanks Guys -

Hi,
Agree. Windows Server 2011 SBS x64 can be the problem.
Thanks,
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Simon Wu
TechNet Community Support

Exchange 2013 SP1 Installation Error in "Mailbox Role: Transport service"

I tried an installation last week on a Windows Server 2008 R2 but was unable to get it to work. With the value of hindsight, I am inclined to think the error was more with the Web Site making EAC unavailable. I subsequently got it installed in my personal
lab environment by creating a VM with a fresh install of Windows Server 2008 R2 SP1.
With this information I then went back to the customer's site and installed a clean version of Windows Server 2008 R2 SP1 in a virtual machine under Hyper-V. After installing all the prerequisites the install appeared to be going just fine but then in failed
in Step 7 with the following error:
The following error was generated when "$error.Clear();
if ( ($server -eq $null) -and ($RoleIsDatacenter -ne $true) )
Update-RmsSharedIdentity -ServerName $RoleNetBIOSName
" was run: "Database is mandatory on UserMailbox.".
I know MS Exchange hides most of its information in AD so my suspicion is that the failed install on the real server has left some residual information in AD. Note that the original install on the real machine won't uninstall because the prior install attempt
hasn't finished.
The relevant part of the Exchange Setup Log is:
[07/22/2014 14:22:57.0593] [2] Active Directory session settings for 'Update-RmsSharedIdentity' are: View Entire Forest: 'True', Configuration Domain Controller: 'AWSDC.aws.local', Preferred Global Catalog: 'AWSDC.aws.local', Preferred Domain Controllers: '{
AWSDC.aws.local }'
[07/22/2014 14:22:57.0593] [2] User specified parameters: -ServerName:'EXCHANGE'
[07/22/2014 14:22:57.0593] [2] Beginning processing Update-RmsSharedIdentity
[07/22/2014 14:22:58.0031] [2] RMS Shared Identity user 'CN=FederatedEmail.4c1f4d8b-8179-4148-93bf-00a95fa1e042,CN=Users,DC=aws,DC=local' (originating server = 'AWSDC.aws.local') is being linked to computer 'CN=EXCHANGE,CN=Computers,DC=aws,DC=local' (originating
server = 'AWSDC.aws.local').
[07/22/2014 14:22:58.0156] [2] [ERROR] Database is mandatory on UserMailbox.
[07/22/2014 14:22:58.0156] [2] Ending processing Update-RmsSharedIdentity
[07/22/2014 14:22:58.0156] [1] The following 1 error(s) occurred during task execution:
[07/22/2014 14:22:58.0156] [1] 0. ErrorRecord: Database is mandatory on UserMailbox.
[07/22/2014 14:22:58.0156] [1] 0. ErrorRecord: Microsoft.Exchange.Data.DataValidationException: Database is mandatory on UserMailbox.
at Microsoft.Exchange.Data.Directory.ADDataSession.Save(ADObject instanceToSave, IEnumerable`1 properties, Boolean bypassValidation)
at Microsoft.Exchange.Management.Deployment.UpdateRmsSharedIdentity.Link()
at Microsoft.Exchange.Management.Deployment.UpdateRmsSharedIdentity.InternalProcessRecord()
at Microsoft.Exchange.Configuration.Tasks.Task.ProcessRecord()
[07/22/2014 14:22:58.0156] [1] [ERROR] The following error was generated when "$error.Clear();
if ( ($server -eq $null) -and ($RoleIsDatacenter -ne $true) )
Update-RmsSharedIdentity -ServerName $RoleNetBIOSName
" was run: "Database is mandatory on UserMailbox.".
[07/22/2014 14:22:58.0156] [1] [ERROR] Database is mandatory on UserMailbox.
Does anyone have suggestions about what to do with ADSI Edit to fix the problems?
I think I am getting close to having a working Exchange!!

Hi,
Agree with Amit's suggestion. Please use the following cmdlet to re-home the arbitration mailbox which does not have database attribute stamped and check the result.
Set-Mailbox "FederatedEmail.4c1f4d8b-8179-4148-93bf-00a95fa1e042" -Arbitration -Database "xxx"
Hope it helps.
Best regards,
Amy Wang
TechNet Community Support

Installer Problem for LW / CVI SP1 on Windows 7 64 bit. Error 1303 for NI Update Sevice 2.0

The installer stop partway through with the following box
NI Update Service 2.0:
Error 1303. The installer hsd insufficient privileges to access this directory:
C:\Programs Files\(x86)\ National Instrument\Shared\Update Service. The
installation cannot continue. Log as administrator or contact your system administrator.
Allowed options are "Retry" and "Cancel".
Rety does nto work.
Logged in with admin rights. Also UAC is triggered for beginning of install.
Several other NI products installed including LV 10, LV10RT, CVI RT and many other (academic SSP).
Thanks in advance. Will try a reboot and reinstall but want to post with this error first.
Solved!
Go to Solution.

Blakney,
Thanks for your post - I don't think it's a false alarm to receive an error message! Did I understood you correctly that you ran the installer as administrator and still got the message of insufficient privileges?
By the way, what would be the preferred procedure: first de-install CVI2010 and then install SP1 or directly install SP1?
Wolfgang

Windows 7 SP1 Installation Error - 0x80070002 - ERROR_FILE_NOT_FOUND

Hi,
I use Windows 7 Professional x64. I installed Readiness tool. It was completed successfuly.
CheckSUR.persist
Summary:
Seconds executed: 597
No errors detected
When I try to install Win7 Service Pack 1 (standalone installer), I get File not found error (0x80070002 - ERROR_FILE_NOT_FOUND). In CBS log, I see this error entry:
Info                  CBS    Failed to find file: x86_networking-mpssvc_31bf3856ad364e35_6.1.7601.17514_none_0c80f0c5176cbb85\Firewall.cpl [HRESULT
= 0x80070002 - ERROR_FILE_NOT_FOUND]
I checked whether Firewall.cpl exists in SP1 or not. When SP1 installer gave error message, I didn't close SP1 window (in order to avoid cleanup). I copied
windows6.1-KB976932-X64.cab file from temporary folder which was created by SP1 installer. I extracted this cab file to new folder by 7-Zip program. I looked into this folder.
I found x86_networking-mpssvc_31bf3856ad364e35_6.1.7601.17514_none_0c80f0c5176cbb85
folder that mentioned in CBS log. Firewall.cpl file didn’t exist in this folder.
Finally, I see that Firewall.cpl file doesn’t exist in required location in SP1 standalone installer
How can I solve the problem?
Thank you
CBS Log Details:
2011-04-04 19:57:19, Info                  CBS    Exec: Staging Package: Microsoft-Windows-RemoteFX-VM-Setup-LanguagePack~31bf3856ad364e35~amd64~tr-TR~6.1.7601.17514,
Update: INF_ts_wpdmtp, PinDeployment: amd64_synth3dvsc.inf-languagepack_31bf3856ad364e35_6.1.7601.17514_tr-tr_dcea92f58067a8c3
2011-04-04 19:57:40, Info                  CBS    Failed to find file: x86_networking-mpssvc_31bf3856ad364e35_6.1.7601.17514_none_0c80f0c5176cbb85\Firewall.cpl
[HRESULT = 0x80070002 - ERROR_FILE_NOT_FOUND]
2011-04-04 19:57:40, Info                  CBS    Failed to gather all required files. [HRESULT = 0x80070002 - ERROR_FILE_NOT_FOUND]
2011-04-04 19:57:40, Info                  CBS    Failed to gather all missing files for package: Package_for_KB976932~31bf3856ad364e35~amd64~~6.1.1.17514 [HRESULT
= 0x80070002 - ERROR_FILE_NOT_FOUND]
2011-04-04 19:57:40, Info                  CSI
0000000e@2011/4/4:16:57:40.453 CSI Transaction @0x1253f30 destroyed
2011-04-04 19:57:40, Error                 CBS    Failed to pre- stage package: Package_for_KB976932~31bf3856ad364e35~amd64~~6.1.1.17514 [HRESULT = 0x80070002 - ERROR_FILE_NOT_FOUND]
2011-04-04 19:57:40, Info                  CBS    Perf: Stage chain complete.
2011-04-04 19:57:40, Info                  CBS    Failed to stage execution chain. [HRESULT = 0x80070002 - ERROR_FILE_NOT_FOUND]
2011-04-04 19:57:40, Error                 CBS    Failed to process Multi-phase execution. [HRESULT = 0x80070002 - ERROR_FILE_NOT_FOUND]
2011-04-04 19:57:40, Info                  CBS    WER: Generating failure report for package: Package_for_KB976932~31bf3856ad364e35~amd64~~6.1.1.17514, status:
0x80070002, failure source: Stage, start state: Resolved, target state: Staged, client id: SP Coordinater Engine
2011-04-04 19:57:40, Info                  CBS    Failed to query DisableWerReporting flag. Assuming not set... [HRESULT = 0x80070002 - ERROR_FILE_NOT_FOUND]
2011-04-04 19:57:40, Info                  CBS    Failed to add %windir%\winsxs\pending.xml to WER report because it is missing. Continuing without it...
2011-04-04 19:57:40, Info                  CBS    Failed to add %windir%\winsxs\pending.xml.bad to WER report because it is missing. Continuing without
it...
2011-04-04 19:57:41, Info                  CBS    Reboot mark refs: 0
2011-04-04 19:57:41, Info                  CBS    SQM: Reporting package change for package: Package_for_KB976932~31bf3856ad364e35~amd64~~6.1.1.17514, current:
Resolved, pending: Default, start: Resolved, applicable: Installed, target: Staged, limit: Staged, hotpatch status: StillGoing, status: 0x0, failure source: Stage, reboot required: False, client id: SP Coordinater Engine, initiated offline: False, execution
sequence: 314, first merged sequence: 314
2011-04-04 19:57:42, Info                  CBS    SQM: Upload requested for report: PackageChangeBegin_Package_for_KB976932~31bf3856ad364e35~amd64~~6.1.1.17514,
session id: 101457923, sample type: Standard
2011-04-04 19:57:42, Info                  CBS    SQM: Ignoring upload request because the sample type is not enabled: Standard
2011-04-04 19:57:42, Info                  CBS    SQM: Reporting package change completion for package: Package_for_KB976932~31bf3856ad364e35~amd64~~6.1.1.17514,
current: Resolved, original: Resolved, target: Staged, status: 0x80070002, failure source: Stage, failure details: "(null)", client id: SP Coordinater Engine, initiated offline: False, execution sequence: 314, first merged sequence: 314
2011-04-04 19:57:42, Info                  CBS    SQM: stage time performance datapoint is invalid. [HRESULT = 0x80070490 - ERROR_NOT_FOUND]
2011-04-04 19:57:42, Info                  CBS    SQM: execute time performance datapoint is invalid. [HRESULT = 0x80070490 - ERROR_NOT_FOUND]
2011-04-04 19:57:42, Info                  CBS    SQM: Upload requested for report: PackageChangeEnd_Package_for_KB976932~31bf3856ad364e35~amd64~~6.1.1.17514,
session id: 101457924, sample type: Standard
2011-04-04 19:57:42, Info                  CBS    SQM: Ignoring upload request because the sample type is not enabled: Standard
2011-04-04 19:57:42, Info                  CBS    Enabling LKG boot option
2011-04-04 19:57:42, Info                  CBS    Restored system sleep block state: 0x80000000
2011-04-04 19:57:42, Info                  CBS    SPI: Error callback - 0x80070002
2011-04-04 19:57:42, Info                  CBS    Exec: Processing complete. Session: 30143207_2763256607, Package: Package_for_KB976932~31bf3856ad364e35~amd64~~6.1.1.17514
[HRESULT = 0x80070002 - ERROR_FILE_NOT_FOUND]
2011-04-04 19:57:42, Error                 CBS    Failed to perform operation. [HRESULT = 0x80070002 - ERROR_FILE_NOT_FOUND]
2011-04-04 19:57:42, Info                  CBS    Session: 30143207_2763256607 finalized. Reboot required: no [HRESULT = 0x80070002 - ERROR_FILE_NOT_FOUND]
2011-04-04 19:57:42, Error                 CBS    SPI: (CSPICbsClient::Finalize:737)Failed to finalize session hr=0x80070002
2011-04-04 19:57:42, Error                 CBS    SPI: (CSPICbsClient::ChangeState:519)Failed to finalize CBS session to install package hr=0x80070002
2011-04-04 19:57:42, Error                 CBS    SPI: (CSPCInstallTask::Execute:1010)Failed to install package with identity Package_for_KB976932~31bf3856ad364e35~amd64~~6.1.1.17514
hr=0x80070002

From the CheckSUR log, I find one error regarding atiilhag.inf has been fixed. Please run SFC and the update readiness tool again until the logs give the all clear.
From CBS log, I notice the following error message.
"Failed to open the registry root: n/a, key: SOFTWARE\Microsoft\Windows\CurrentVersion\Setup\ServicePack\SPReview. er=0x2"
I suggest booting in Safe Mode and take the ownership of the registry.
1. Click Start -> type
regedit in the search box and press Enter.
2. Navigate to the following registry:
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Setup]
3. Right click
Setup folder, choose permission, add everyone account into list with full permission.
4. Click
Advanced button, select the option for Replace all child object permissions with inheritable permission form this object.
After that, reboot in Safe Mode and run Standalone installer again to check the result. If the issue persists, I think the best efficient way is in-place.
In-place upgrade
http://support.microsoft.com/kb/2255099
http://www.sevenforums.com/tutorials/3413-repair-install.html
Note: Since the website is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this information.
Thanks & Regards
Mark Louis

BI 40 Installation SP1

Similar Messages

Maybe you are looking for