Bi 7.0 and MDM integration problem

will it be possible to do seperate application of MDM built on BI 7.0 application in the single server which will result to provide set of tables .
As per requirement in BI we have to consolidate and harmonise of master data as a whole.
Edited by: shaik sarfraz on Oct 15, 2008 10:26 AM

Dear,
Plz chk:
http://portal.acm.org/ft_gateway.cfm?id=355306&type=pdf&dl=GUIDE&dl=ACM
http://www.redbooks.ibm.com/redbooks/pdfs/sg246489.pdf
http://www.cio.sc.gov/SCEA/eap/All_Enterprise-Applications.pdf
http://www.sap.info/public/INT/int/glossary/int/glossaryletter/Word-38053d4a869829887_glossary/S
http://www.inforte.com/ideas/points_of_view/content/pov_integratedplanningbusinesscontent.pdf
http://www.esri.com/news/arcnews/fall06articles/sap-and-esri.html
Thanks

Similar Messages

ISE 1.2 and MDM integration.

What kind of device information I can collect by MDM integartion with ISE.

Hello,
ISE Release 1.2 delivers integration between Identity Services Engine and MDM platforms, which can ensure that all mobile devices are compliant with security policy before they are allowed to access the network. This feature enables posture compliance assessment and network access control of mobile endpoints attempting to access the network. The solution also performs ongoing posture checks to ensure that devices remain compliant and that the correct network access level is maintained. The specific posture attributes collected by MDM partner platforms for compliance and access policy enforcement in the Identity Services Engine are:
• Is the mobile device registered with MDM?
• Does the mobile device have disk encryption enabled?
• Does the device have PIN-Lock enabled?
• Has the device been jail-broken/rooted?
In terms of global compliance, posture compliance decisions may be made by the MDM platform instead of the Identity Services Engine. In this scenario, additional attributes such as blacklisted applications or presence of an enterprise data container may be checked. The MDM platform simply informs the Identity Services Engine if a device is in compliance, then the Identity Services Engine enforces the appropriate network access policy.
This integration brings great value to MDM customers as it automates to the device registration process. As MDM solutions are network-blind, they can't detect a new device when it connects to the wireless network, so the administrator needs to send a notification to the users who wish to enroll their devices. With ISE integration, device enrollment is done automatically when users connect their device to the Wi-Fi network.
SNS appliances are now available with ISE 1.2 in SNS-3415-K9 and SNS-3495-K9 appliances.

Artesia and MDM Integration

Has anyone enabled the link between Artesia digital asset management (DAM) tools and MDM? We keep all our product images in Artesia (tool is called TEAMS) and would like to point our MDM-based product info repository to Artesia so that we don't need to import images directly into MDM.
Also, we use Documentum for management of our product literature. Does anyone have experience integrating MDM and Documentum?
Thanks.
Mike Jakeway
Lead Technical Analyst
Whirlpool Corp.

Hi Michael,
I have come across the similar case once but not using DAM.
First let me understand your requirements clearly.
You dont want to import images to MDM repository. Instead you want to point the product data stored in MDM to its corresponding image stored in DAM.
This is simple if your environment is applicable to any my assumptions mentioned below.
My assumption 1:
You have implemented DAM tool for managing images newly and no application or data base linked with DAM.
My suggestion 1:
Artesia should be storing images in a database with a field for "image id" right? In that case we can add a new field for "Product id" in the DAM database (if not exists) and map the image in the DAM with the Product data using "Product id" field from source data (DAM) and "Product id" field in MDM. Syndicate MDM with DAM database. So that when ever you add a new product data, a new product id will be added in your DAM database.
My assumption 2:
You have already inplemented DAM tools and developed application (Say .Net) for managing the product data. Now you are planning to move the product imformation to MDM and view the product detail in the portal (Say SAP EP) iview.
My Suggestion 2:
If you are planning to view the product data and images in the portal, we can develop coustom iview which retrieves product data from MDM and image data from DAM.
Same case appicable to Documentum management.
Let me know in detail if have some other scnarios.
Thanks,
Prabhu

CC&B and MDM Integration

Dear Friends,
Currently we are using ccb 2.3.0 and MDM 1.6.0 versions
1.How we can integrate CC&B and MDM ,
2. what are various possible ways of integration and components required for the same
pls recommend the latest versions if integration becomes easier
thanks and regards
sivaram

The new MDM 2.0.1 version has some integration functionalities build in.
MDM 2.0 has introduced a concept called "Seeder" this is more or less an XAI Integration.
Since version 2.0.1 you have a Seeder for IMD import and master data synchronization.
You can review the documentation (Framework_Administration_Guide_v4_1_0) if you are interested in details.
Check chapter "External Application Integration".
The suggested way is to setup OSB for message routing and transformation and XAI to publish/subscribe the integration
messages.
/Markus

BI7 and MDM integration

hi..
I am working on BI7 and MDM(sp04) integration scenario through ABAP APIs. For this scenario what s/w( including support packs and which APIs) are needed to install on BI server. and where can I found that information.... plzz provide some documentation and some links which can guide me..
cheers,
Suman.

Hi Suman,
Check the following link, will get some information
https://www.sdn.sap.com/irj/sdn/advancedsearch?cat=sdn_all&query=bi7andmdmsupportpack&adv=false&sortby=cm_rnd_rankvalue
Thanks & Regards,
Hema

FaceBook and twitter integration problem

My face book and twitter tab are disappear from my notification any one plz guide my

I am having the same problem - both integration tabs have disappeared from my notification center. I know they were there after I upgraded to iOS6 on Friday, but as of yesterday they were gone.

XSLT and XML integration problem

Hi there,
Got a problem that I dont understand why its happening. I have an XML document (produced by the JDOM ResultSet Builder).
And I run it through a stylesheet and the data comes up normally. When I now add the banner and navigation bar details to the stylesheet document leaving all the transformatio stuff the same, but there is no longer an output in my browser.
Checking catalina.out shows a
java.lang.nullPointerException
which occurs just when Im about to do the transformation .....
Transformer transformer = template.newTransformer();
Any ideas why this is so.
Many thanks
JS
Here's my code FYI
XML
<?xml version="1.0" encoding="UTF-8"?>
<result>
 <entry>
 <StudentID>9917217</StudentID>
 <DCSCentralID>1</DCSCentralID>
 <FirstName>Jason</FirstName>
 <LastName>Smartt</LastName>
 <DateOfBirth>10 June 1976 00:00:00 o'clock BST</DateOfBirth>
 <TermTimeAddress>25 Oakwood Close, Burton, London</TermTimeAddress>
 <TermTimePostCode>SE5 3LS</TermTimePostCode>
 <PermanentAddress>15 West Wickham Road, Bromley</PermanentAddress>
 <PermanentPostCode>BR4 5TT</PermanentPostCode>
 <PermanentPhoneNumber>02074556789</PermanentPhoneNumber>
 <MobileTelephone>07987 654664</MobileTelephone>
 <EmailAddress>[email protected]</EmailAddress>
 <EntryQualifications>AAC</EntryQualifications>
 <YearOfEntry>1999</YearOfEntry>
 <YearOfGrad>2003</YearOfGrad>
 <CurrentStage>3</CurrentStage>
 <CandidateNumber>E08956</CandidateNumber>
 <LecturerID>TC01</LecturerID>
 <UCASCode>G4N2</UCASCode>
 <Photograph />
 </entry>
</result>
XSL Document
<?xml version="1.0" encoding="UTF-8"?>
<xsl:stylesheet version="1.0"
 xmlns:xsl="http://www.w3.org/1999/XSL/Transform">
 <xsl:template match="/">
 <html>
 <xsl:apply-templates select="result/entry"/>
 </html>
 </xsl:template>
 <xsl:template match="result/entry">
 <head>
 <title>MyDetails</title></head>
 <body bgcolor="#FFFFFF">
<table border="1" width="100%" height="82" cellspacing="0" cellpadding="0" bgcolor="#FFCC00" bordercolordark="#666666" bordercolorlight="#CCCCCC">
<tr>
<td width="22%" height="90" bordercolor="#0000FF" valign="middle" align="center">
<h1 align="center">myDCS</h1>
 
</td>
<td width="61%" height="90" bordercolorlight="#000000">
</td>
<td width="17%" height="90" bordercolorlight="#000000">
</td>
</tr>
</table>

 <table border="0" width="100%" cellpadding="0" cellspacing="0" height="355">
 <tr>
 <td width="100%" colspan="2" bgcolor="#FFFF00">
 MyDetails</td>
 </tr>
 <tr>
 <td width="50%">Personals</td>
 <td width="50%"></td>
 </tr>
 <tr>
 <td width="50%">Student ID</td>
 <td width="50%"><xsl:apply-templates select="StudentID"/></td>
 </tr>
 <tr>
 <td width="50%">DCSCentralID</td>
 <td width="50%"><xsl:apply-templates select="DCSCentralID"/></td>
 </tr>
 <tr>
 <td width="50%">First Name</td>
 <td width="50%"><xsl:apply-templates select="FirstName"/></td>
 </tr>
 <tr>
 <td width="50%">Surname</td>
 <td width="50%"><xsl:apply-templates select="LastName"/></td>
 </tr>
 <tr>
 <td width="50%" height="20">Date Of Birth</td>
 <td width="50%" height="20"><xsl:apply-templates select="DateOfBirth"/></td>
 </tr>
 <tr>
 <td width="50%" height="21"></td>
 <td width="50%" height="21"></td>
 </tr>
 <tr>
 <td width="100%" colspan="2" height="21">Address Information</td>
 </tr>
 <tr>
 <td width="50%" height="20">Term-Time Address</td>
 <td width="50%" height="20"><xsl:apply-templates select="TermTimeAddress"/></td>
 </tr>
 <tr>
 <td width="50%" height="20">Term-Time Postcode</td>
 <td width="50%" height="20"><xsl:apply-templates select="TermTimePostCode"/></td>
 </tr>
 <tr>
 <td width="50%" height="20">Permanent Home Address</td>
 <td width="50%" height="20"><xsl:apply-templates select="PermanentAddress"/></td>
 </tr>
 <tr>
 <td width="50%" height="20">Permanent Home Postcode</td>
 <td width="50%" height="20"><xsl:apply-templates select="PermanentPostCode"/></td>
 </tr>
 <tr>
 <td width="50%" height="20">Permanent Phone Number</td>
 <td width="50%" height="20"><xsl:apply-templates select="PermanentPhoneNumber"/></td>
 </tr>
 <tr>
 <td width="50%" height="21"></td>
 <td width="50%" height="21"></td>
 </tr>
 <tr>
 <td width="50%" height="21">Contact Details</td>
 <td width="50%" height="21"></td>
 </tr>
 <tr>
 <td width="50%" height="20">Mobile Phone Number</td>
 <td width="50%" height="20"><xsl:apply-templates select="MobileTelephone"/></td>
 </tr>
 <tr>
 <td width="50%" height="20">Email Address</td>
 <td width="50%" height="20"><xsl:apply-templates select="EmailAddress"/></td>
 </tr>
 <tr>
 <td width="50%" height="21"></td>
 <td width="50%" height="21"></td>
 </tr>
 <tr>
 <td width="50%" height="21">Academic Information</td>
 <td width="50%" height="21"></td>
 </tr>
 <tr>
 <td width="50%" height="20">Entry Grades</td>
 <td width="50%" height="20"><xsl:apply-templates select="EntryQualifications"/></td>
 </tr>
 <tr>
 <td width="50%" height="20">Year of Entry</td>
 <td width="50%" height="20"><xsl:apply-templates select="YearOfEntry"/></td>
 </tr>
 <tr>
 <td width="50%" height="21">Year of Graduation</td>
 <td width="50%" height="21"><xsl:apply-templates select="YearOfGrad"/></td>
 </tr>
 <tr>
 <td width="50%" height="21">Current Stage</td>
 <td width="50%" height="21"><xsl:apply-templates select="CurrentStage"/></td>
 </tr>
 <tr>
 <td width="50%" height="21">UCAS Code</td>
 <td width="50%" height="21"><xsl:apply-templates select="UCASCode"/></td>
 </tr>
 <tr>
 <td width="50%" height="21">Candidate Number</td>
 <td width="50%" height="21"><xsl:apply-templates select="CandidateNumber"/></td>
 </tr>
 <tr>
 <td width="50%" height="21">Tutor Code</td>
 <td width="50%" height="21"><xsl:apply-templates select="LecturerID"/></td>
 </tr>
 </table>
 </body>
 </xsl:template>
 <xsl:template match="StudentID">
 <xsl:value-of select="."/>
 </xsl:template>
 <xsl:template match="DCSCentralID">
 <xsl:value-of select="."/>
 </xsl:template>
 <xsl:template match="FirstName">
 <xsl:value-of select="."/>
 </xsl:template>
 <xsl:template match="LastName">
 <xsl:value-of select="."/>
 </xsl:template>
 <xsl:template match="DateOfBirth">
 <xsl:value-of select="."/>
 </xsl:template>
 <xsl:template match="TermTimeAddress">
 <xsl:value-of select="."/>
 </xsl:template>
 <xsl:template match="TermTimePostCode">
 <xsl:value-of select="."/>
 </xsl:template>
 <xsl:template match="PermanentAddress">
 <xsl:value-of select="."/>
 </xsl:template>
 <xsl:template match="PermanentPostCode">
 <xsl:value-of select="."/>
 </xsl:template>
 <xsl:template match="PermanentPhoneNumber">
 <xsl:value-of select="."/>
 </xsl:template>
 <xsl:template match="MobileTelephone">
 <xsl:value-of select="."/>
 </xsl:template>
 <xsl:template match="EmailAddress">
 <xsl:value-of select="."/>
 </xsl:template>
 <xsl:template match="YearOfEntry">
 <xsl:value-of select="."/>
 </xsl:template>
 <xsl:template match="YearOfGrad">
 <xsl:value-of select="."/>
 </xsl:template>
 <xsl:template match="CurrentStage">
 <xsl:value-of select="."/>
 </xsl:template>
 <xsl:template match="UCASCode">
 <xsl:value-of select="."/>
 </xsl:template>
 <xsl:template match="CandidateNumber">
 <xsl:value-of select="."/>
 </xsl:template>
 <xsl:template match="LecturerID">
 <xsl:value-of select="."/>
 </xsl:template>
</xsl:stylesheet>
Thx again.
J

Thanks dvohra
But in my servlet, I already have the transformer factory defined as follows
public class JDOMServlet extends HttpServlet {
 private TransformerFactory tFactory = TransformerFactory.newInstance();
 private ResultSet rs = null;
 private StreamSource xsltSource;
 private Templates template;
 public void init(ServletConfig config) throws ServletException {
 super.init(config);
 ServletContext ctx = config.getServletContext();
 try {
 //Want to cache the stylesheet for future resuse
 //then it doesnt have to be loaded constantly
 URL xslURL = ctx.getResource("/WEB-INF/viewStudentDetails.xsl");
 System.out.println(xslURL);
 xsltSource = new StreamSource(new java.net.URL(xslURL.toString()).openStream());
 //xsltSource = new StreamSource(ctx.getResourceAsStream("/Web-inf/viewStudentDetails.xsl"));
 template = tFactory.newTemplates(xsltSource);
 catch (Exception e) {
 e.printStackTrace();
I think the key point is that, this transformation servlet worked fine, when all it was outputting was the xml data, styled in a table. As soon as I enter more table info, (i.e. for the banner and navigation bar), the null pointer exception pops up.
....a lost and puzzled jase....
Thanks again.
JS

MM and BW integration problem

Hi every one,
This problem persistes to both MM and BW in our project
In MM we need to fing out certain fields and tables for which condition records are available in SAP. For this we need to map and find the relation between tables and fields in order to extract the data by extractor in BW.
For one of the tables and fileds in Vendor i.e
1. Characteristic - CABN - ATNAM
2. Characteristic Value - CAWN - ATWRT
3. Vendor Name - ADDR1_DATA - NAME1
For these I need to map these fileds and need to find out the relation for other tables as well like EKPO and EKKO.
But I am unable to find out relation between for example EKPO, EKKO, CAWN and CABN. Can anyone explain me wr and how can I find out the relation. Since so far ADDR1_DATA is a structure, from this how can we find out the fileld NAME1 in which table and how that table is linked to CABN or CAWN
Please guys this is an urgent, your immediate repond is highly appreciate.
Thanks in advance
chandu

Hi
This is mainly for procurement by vendor characteristic. As i explained previously main tension for this is need to extract conditon records for the available data elemts in MM. As far as MM concern they configured certain dataelements and for this, certain condition records of particular structure or table are stored & available in certain tables in data dictionary.
for Ex:
1.like ADDR1_DATA(Vendor Name- NAME1) are being maintained in table ADRC,
2.characteristis and char values in CABN & CAWN resp'
3. PO and INVOICE data elements in EKKO - BEDAT, EKPO - NAME1.
And for the above mentioned tables and fields, we need to find relation b/w these tables, so that mappping and extraction of condition records will be done.
For Ex: In EKKO & EKPO these tables are related based on EBELN avialable in both of the tables which is a key field, like wise I am not able to find relation between CABN,CAWN and EKKO or EKPO.
I need to join these tables so that extraction is possible
This will be an clear question I hope
regards
chandu

R/3 u2013 XI u2013 MDM integration scenario - Standard import Maps problem

Hi Data Masters,
We are working on R/3 u2013 XI u2013 MDM integration scenario for Vendor Object. We have extracted main table Data using u201CMDM_CLNT_EXTRu201D program. Now while importing the data in MDM we want to use u201CStandard business content i.e. Standard Import Maps (Name u2013 cremdm - 03 u201D but this maps are not mapping all the fields. So do we need to extend this maps..??
OK. Second, To create own maps we are facing following problems,
1) In source section many fields are reflecting twice means in two segments i.e. LFA1 and ADRMAS like Name, City, Street, country etcu2026 whereas in Target section we have one field for the same so how to maps this fields.
2) In source, There are few fields like ADRNR which have values but in target we donot have any fields to map for the same, so how to handle thisu2026
Helpful answers will be rewarded,
Cheers
RC

closed

BE 3000 with Jabber (for Mac) and webex connect integration problems

Hi,
This is my first question on the forum so please be gentle!
I have a customer who has a Business Edition 3000 and they have purchased WebEx connect and Jabber integration to go with it.
My problem is I am having difficulty getting the setup to work and I have a number of questions on how to set this up. Most of the docs on Cisco's website seem to be related to either CUCME or full CUCM, but not a lot on BE 3000. My questions are below:
1. I have been reading the documentation for WebEx connect and it states to set the IP address of the BE 3000 server in the Configuration>Additional Services>Unified Communications>Voicemail tab. This is currently on the network with a 192.168.x.x address however. My predecessor put this IP address in the WebEx configuration page but I'm not sure this will work with a private IP as I don't know how this communicates back. The documentation isn't very clear on this. Does this have to be a public IP address / FQDN for it to work?
2. Are there any SRNDs for this type of setup that could help? Again, looking through the website hasn't turned anything up yet.
Note:
we are using the following software:
Jabber for MAC:
uc-client-mac-8.6.7.20127.fcs.zip
MAC OS:
OSX 10.8.3
BE 3000:
MCS7890C1-BE8
8.6.4.10000-15.
Thanks in advance for any help.
Regards,
Jason

Hi - I have done this via the admin portal but still cannot get the Jabber client for Mac to register for voice. The Windows version works fine for the same user and CUCM device. Are there any other settings that need to be enabled specific to the Mac client?
Thanks.

Brief discussion on SAP XI and its' Integration with SAP MDM.

Hi,
I have never worked on SAP XI.
I am discussing it on brief, please give your valuable replies.
SAP XI consists of System Landascape Directory(SLD).
SLD Consists of Business System and Techinical System.
Technical System contains all information about the software
component. The Business System consists of Inbound and Outbound Business
System which are used as logical names for data transfer.
There is communication Channel for Receiver and Sender Business System and n agreement
is signed between Sender and Receiver.
Outbound Interface defined for Business System Outbound and Techical System associated
with the Business System,
Inbound Interface defined for Business System Inbound and Techical System associated
with the Business System.
In SAP NetWeaver XI Integration Directory, we have defined the Integration Scenarios,
Actions, Interface Objects, Mapping Objects, Adapters Objects.
Mapping Object defines the Structure and Value Mapping.
Adapter Objects defines the Adapter program which implements RFC Adapter, FTP Adapter logic.
FTP Adapter is used for XI-MDM Communication.
RFC Adapter is used for XI-ECC Communication.
Integration Repository: Both Outbound and Inbound Interfaces are Mapped with Value mapping and
Structure Mapping inside Integration Repository.
The File Adapter takes the File from the Outbound port of MDM System
and sends it as IDOC to Receiver Business System.
Value Mapping must be done between Sender and Receiver interfaces.
Value Mapping is done by XSLT or Java based program.
SAP NetWeaver XI Integration Server at runtime:
Message Split, Interface Determination, Receiver Identifaction, Mapping, Techincal Routing
and Call Adapter Proccess are done.
In SAP XI 3.0 and MDM 5.5:
Step 1: Create busines system as service.
Step 2: Create communication channel for each business service. If the system can communicate
through different channels, then create all possible channel types if necessary.
Step 3: Create receiver agreement between the systems.
Step 4: Interface determination:
- Here you see for the first time the software component mentioned;
there are some special requirements regarding this software component in relation to the customizing ID mapping.
- To modify this software component, the customer needs to copy the SAP standard delivered software component
into its own namespace. The customer is able to modify to create archives
for the customized ID mapping.
Receiver determination.
Configure an FTP Server on the MDS.
Create a send folder for outbound messages using outbound port(s) for
remote systems(s).
Create receive folder inbound messages using inbound port(s) for remote systems.
This ia all about concept of SAP XI Infractsture and its' Integration with SAP MDM 5.5.
Regards
Kaushik Banerjee

Hi Kaushik,
You must be aware of File types that MDM Import Manager can Import i.e. we have XML, Excel etc. Now there are two transactions to extract data from R3
1. MDMGX -
         - For lookup table extraction
         - Output in XML format which MDM can import without using XI.
          - FTP can be configured to put the file in the desired folder which will be then picked by Import Server.
2. MDM_CLNT_EXTR -
          - For Main table records.
          - Output is in Idoc format which MDM doesn't understand hence we need XI in between which converts Idoc file received from R3 into XML which can then be imported using Import Manager or Import Server. For this we need to implement XI Scenario that consists of Source System, Receiver System, Type of Data etc.
Just a basic understanding...
Regards,
Jitesh Talreja

Test/Trial project on MDM and XI integration.

Test/Trial project on MDM and XI integration.
I want to try out a test case scenario where in i would be importing and exporting data to XI (Using XML files i guess)
I am a newbie in MDM integration.
Please help me out with my trial project.
What i already have:
I have MDM system and repository on which i have been learning basic MDM designing a (test)repository of my own.
What information i need:
-What all system requirements (XI system configuration and all) are needed to established. (What all should i be asking the XI and the system admin guys to be able to get the platform ready for me.*
*-The further procedure for actual integration to be done for importing/exporting data as in a real time project scenario

Hi Gaurav,
SInce you want to try a test scenario including MDM and XI, I would suggest you to try
ECC -> XI->MDM scenario
Wherein you can take the data from ECC in the form of IDOCs and convert them into XML.
You can then import the XML into an MDM repository. MDM repository can be a Customer, Material, Vendor etc repository. Hence extract the similar data from ECC.
Kindly follow the steps below:
1) Firstly you will have to extrcat the look-up table data from R3 using MDMGX transaction-
Please follow this link to know about the same:
How to Configure Master Data Management Reference Data Extraction -
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f0740b31-a934-2b10-2e95-af2252991baa
https://websmp203.sap-ag.de/~sapidb/012006153200000394732006E/MDM554_GenericExtactor.pdf
2) For loading the main Table Data into MDM, kindly follow the link below, which will guide you to the config/prcoess that will be required for the data to be uploaded from R3 into MDM.
2.1) R/3-XI-MDM (Outbound Scenario)
You will have to extract the data from R3 in the form of IDOCS and then using XI, you will have to convert them into XML format as MDM understands that.
2.2) For the process of Data from MDM back to R3, kindly refer this link below:
MDM-XI-R/3 Integration
2.3) For general info about this scenario, kindly refer this link below:
MDM Mass data Integration with R/3 made easy
Please follow these links for additional info-
1) SAP Network Blog: XI Configuration for MDM Integration - Sample Scenario-
XI Configuration for MDM Integration - Sample Scenario
2) The below given blog can be used to understand the XI config done when data is sent back from MDM via XI to R3.
MDM->XI->R3
MDM-XI-R/3 Integration
3) MDM 5.5 data distribution using SAP XI -
MDM 5.5 data distribution using SAP XI
Hope this information helps.
Thanks and Regards
Nitin jain

MDM integrity between SRM and R/3

Hi All,
How MDM integrity of the process validations being made between SRM and R/3 for the creation of different documents.
Please share me any documents regarding MDM intergirty between SRM and R/3. This is not related to Catalogs,
1. Creation of documents like GOA in SRM and distributed to R/3. How MDM will validate that data.
2 If same material available in different backend system. while creating Contract in SRM, MDM should check the R/3 materials in MDM
3. How to integrity works for Vendors.
Thanks
ravi

Hi,
Take a look in these threads:
[Re: material master replication|Re: material master replication]
[Master Data Synchronization between SRM and ERP|Master Data Synchronization between SRM and ERP]
[Re: Material replication|Re: Material replication]
Rgs,
Pedro Marques

Metadata Integrator for ECC and MDM

Hi ,
Please help me choose the correct Metadata Integrator for the following:
1. ECC
2. MDM
Thanks in advance,
Munavar

HI Manoj,
Thanks for your reply. Yes, I am looking for integrators for ECC and MDM.
How do we pull metadata from ECC and MDM into BOMM?
Thanks,
Munavar

BI7.0 and MDM(sp06) Integration

Hi,
I am working on BI7 and MDM(sp06) integration scenario through ABAP APIs. For this scenario which support packs and API's need to install in BI server and where can I found complete information about integration..... plzz provide some documentation and some links which can guide me..
Thanx in Advance.
Rgds,
Ram

Hi Reddy,
Go to [http://service.sap.com/swdc] --> Support packages and patches --> Entry by application group --> SAP NetWeaver --> SAP MDM
You will get JAVA APIs and Portal Content there.
go through this link...
[How to define portal system to access MDM server;
For a pretty good introduction to MDM workflow, see the following article: [https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/9180cbaf-0801-0010-f882-f2af6dc975d0.]
[MDM Workflow - Please help a student!;
regards,
NR

Bi 7.0 and MDM integration problem

Similar Messages

Maybe you are looking for