BI 7.0,  BDLS is not converting all logical systems for datasources

Hello all,
We have refreshed an ECC system, and during the post steps in BI, we were running into issues.
We've ran BDLS to convert the logical system from ECCCLNTXXX to ECCCLNTYYY, but it's was not converting for several datasources.
One in particular was causing several problems, and terminating the conversion.
0FC_CI_01.  It is still hanging on to the old logical system.  BDLS terminates with the following information:
Short text:
Active version of emulated 3.x DataSource 0FC_CI_01 cannot...
Basically, the exact symptom of Note 936644.
Eventually, through a series of trials, we discovered we could assign non-active sourcesystem/logical system combinations to the objects.  As a result, we deleted the source systems entirely, ran BDLS to the ECCCLNTYYY, then recreated the sources.
This finally worked.  What I need now is a root cause.  Why would BI refuse to change the logical system of an object to an active one, but have no problem with an inactive?

Mike,
After running BDLS, you need to replicate the source system in BW, change the contents of the target host and fields for all R/3 and Data Mart(note 184754). Update the target BW system name in table T000 using SM30. Change logical system name in all BW tables using BDLS (note 325525)
Refer to the below doc for detail. Also refer to note 886102.
[http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/805eefcd-5428-2d10-c0ab-dc27a95b2c81?quicklink=index&overridelayout=true]
Below note talks about similar issue.
How to change all infosources to the new source system automatically
Hope this helps.

Similar Messages

  • Not converting the logical system through BDLS

    Hi Experts,
    I did the system copy of BI system from production to developemnt
    To change the logical system  in RSA1 --> Source systems
    I have choose client role as test in scc4 and in tcode BDLS i have given the old logical system name new  logical system name
    after completing the job RBDLSMAP i checked in the RSA1 there is no change in logical sytem
    i got the following message
    SM37 log
    Job started
    Step 001 started (program RBDLSMAP, variant &0000000000005, user ID ABCD)
    Logical system name ABC500-1 does not match SAP's recommendation
    Job RBDLSMAP no longer exists
    Converted table: 'RSSTATMANSTATUS'; number of changes: ''
    Converted table: 'RSSTATMANSTATDEL'; number of changes: ''
    Converted table: 'RSSTATMANREQMAP'; number of changes: ''
    Converted table: 'RSSTATMANREQMDEL'; number of changes: ''
    Converted table: 'RSSTATMANPSA'; number of changes: ''
    Converted table: 'RSMDATASTATE_EXT'; number of changes: ''
    Job finished
    Spool log
    Table Name                Field Name       Number of Relevant Entries    Number of Converted Entries
    /BI0/ABP_CUST00*          LOGSYS                              0                              0
    /BI0/ABP_CUST40*          LOGSYS                              0                              0
    /BI0/ABP_VEND00*          LOGSYS                              0                              0
    /BI0/ABP_VEND40*          LOGSYS                              0                              0
    /BI0/ACDS_DS0400*         LOGSYS                              0                              0
    /BI0/ACDS_DS0440*         LOGSYS                              0                              0
    /BI0/ACDS_DS0500*         LOGSYS                              0                              0
    /BI0/ACDS_DS0540*         LOGSYS                              0                              0
    /BI0/ACLM_DS0300*         CLM_FISY                            0                              0
                              LOGSYS                              0                              0
    /BI0/ACLM_DS0340*         CLM_FISY                            0                              0
                              LOGSYS                              0                              0
    /BI0/ACLM_DS0600*         CLM_FISY                            0                              0
                              LOGSYS                              0                              0
    /BI0/ACLM_DS0640*         CLM_FISY                            0                              0
                              LOGSYS                              0                              0
    /BI0/ACRM_CMGL00*         LOGSYS                              0                              0
    /BI0/ACRM_CMGL40*         LOGSYS                              0                              0
    /BI0/ACSM_LINK00*         LOGSYS                              0                              0
    /BI0/ACSM_LINK40*         LOGSYS                              0                              0
    /BI0/AGN_BP00*            GN_PAR_LSY                          0                              0
    /BI0/AGN_BP40*            GN_PAR_LSY                          0                              0
    /BI0/AGN_CONV00*          LOGSYS                              0                              0
    /BI0/AGN_CONV40*          LOGSYS                              0                              0
    Could any body help me in this
    Thanks & Regards,
    Arun

    Hi experts,
    I have done the system copy form Production to Developement.
    Transfermations and DTP(Data transfer process) are still connected from Produciton R3 which  should be from developemnt R3.
    I have tryied to change the logical sytem name through BDLS. But the logical system name is not changed
    i got the job log which is in above conversation in my thread.
    Please let me know how to change the logical system name in Transfermations and DTP in RSA1
    Thanks & Regards,
    Arun

  • BDLS is not converting DataSource source systems

    After running BDLS on our BW system to convert from logical system DV1220 to ED2CLNT220 we found that the source system assignments for our datasources are not getting converted.  Specifically table RSISOSMAP which holds the mapping between the infosource and the OLTP system. We did check several of our ODS's and Info-cubes and the logical system were changed from DV1220 to ED2CLNT220.
    Any help would be appreciated.
    Regards,
    Mike...

    Mike,
    After running BDLS, you need to replicate the source system in BW, change the contents of the target host and fields for all R/3 and Data Mart(note 184754). Update the target BW system name in table T000 using SM30. Change logical system name in all BW tables using BDLS (note 325525)
    Refer to the below doc for detail. Also refer to note 886102.
    [http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/805eefcd-5428-2d10-c0ab-dc27a95b2c81?quicklink=index&overridelayout=true]
    Below note talks about similar issue.
    How to change all infosources to the new source system automatically
    Hope this helps.

  • Pdf converter pro not converting all columns

    pdf converter pro not converting all columns

    I'm using FrameMaker 7.1 to create multi-file user manual books (one file = one chapter). In Book view, I use the File > Save Book As... option to create the PDFs.
    Most of the FrameMaker cross-references work in the PDF, jumping to the referenced location as expected. Not all do, however. If there is a common trait among the jumps that won't jump, I have not identified it.
    I have downloaded the entire 7.1 "upgrade library" from the Adobe Web site (one update), but the problem persists. Any thoughts would be appreciated.
    Thanks.
    DC Smith

  • In solution manager system not showing all the system in SLD

    Dear Gurus,
    During the installation of solution manger sysyem i selected as a Central SLD as solution manager
    Later installed ECC 6.0 and EP systems selected SLD as solution manager system during the instllation.
    If i login in to http://hostname:50000/sld (solution manger system) and the screen also not showing all the options also. some options missing in the tab. Wat I need to do to see all the options clearly.
    It is not showing all the systems if i check in EP and ECC for SLDCHECK it is not givng any errror.
    But if i login into solution manger not  able to see all the system in SLD.
    Regards

    Thanks for reply
    it is not showing all the systems

  • I have just purchased elements 12. It will not convert a raw file for me. i have downloaded DNG convertor 8.5 but it says that my Canon 70d is not compatible. I never had a problem with my last camera canon 7d and elments 8. Can someone help me please..

    i have just purchased elements 12. It will not convert a raw file for me. i have downloaded DNG convertor 8.5 but it says that my Canon 70d is not compatible. I never had a problem with my last camera canon 7d and elments 8. Can someone help me please

    Did you buy PSE in the mac app store? If not, just go to Help>Updates in the editor and update camera raw and you should be able to open the raw files in PSE 12 directly without the DNG converter.

  • OCI Catalog for Vendor problem : Logical system for catalog not maintained

    We have set up an OCI catalog with on of our vendors. This works fine untill we transfer shopping basket data from Vendor sysem into our SRM-system (SRM5.0). Then data is not being transfered and Vendor Webshop screen remains 'open'.
    in SLG1 i have found an error "Logical system for catalog not maintained. Inform system administrator'
    Anyone an idea what the cause of this error can be or what we need to check ?
    Thanks in advance

    Hi,
    I have not seen that error before. However, I think it may have to do with the LOGICAL_SYSTEM OCI field. Can you check if your punch-out catalog vendor is populating that field? Also, check if you have the correct BP# populated in the catalog configuration and the LOGICAL SYSTEM Field on the define External Webservices is blank.
    SG

  • BPM--cannot convert sender logical system to ALE

    Hi
    My Scenario is file-bpm-idoc.. Where i am getting an error saying "cannot convert sender logical system to ALE"  for the BPM.
    i tried entering the logical system for the BPM in adapter specific attributes but it says logical system is already being used by some other service..
    So i tried header mapping in receiver agreement now the messages are failed at the intital stage before entering the BPM only only saying cannnot find recvr agreement..
    My sender system BS_EXT_100
    BPM IP_calldoc
    Recvr system BS_EDCR/3_200
    i did the header mapping for recvr agreement of BPM by selecting the sender service and entering "BS_EXT_100"
    Where am i going wrong...

    solved it myself.. Thanks

  • Product category does not exist in logical system

    Hello Experts,
    Need help in understanding product category change behaviour.
    Shopping cart created and approved.
    PO created and approved.
    Now PO change version created by changing product category.
    Please enlighten me whether this change is really allowed on business perspective and SAP perspective.
    So far we been told that there is business case to justify this change.
    If allowed by SAP, then how do we solve the problem of error occuring in workflow "product category does not exist in logical system XXXX".
    Please advise.
    Thanks,
    Gaurav

    Hi
    I dont have  a system right now to check
    1.are you ordering the item from external catalog? ( any  mapping between catalog product category to SAP product category )?
    2. after approved PO created.
    3. Now BUYER could change the product category again?
    4. why the BUYER takes push ups for REQUESTER . Let Buyer cancel the PO and ask requester to create a PO.
    What is the business process existing in your business ?
    Since product category determines purchase group and every thing like gl account etc..
    Can you recreate the same issue in development box?
    Note 1466155 - GL account not re-determined on change of product categorySymptom
    You have an SRM PO with items having multiple account assignment. Go to the PO item overview OR to the item basic data tab and change the product category. However, this does not trigger a new GL account determination for the accounting lines.
    Note 1407962 - Category is editable when contract is assigned in PO item
    Symptom
    When ever a Contract item (Free text or Product Category) is assigned to a Purchase order free text line item, The category modification is not allowed.  This is because the product category is always copied from the contract item and overrides the Category for Purchase Order Item. It is confusing for the user as the category is editable and can't be modified.
    SAP has different different behaviors . Kindly tell us what type you belongs too...

  • Adobe After Effects CC not converting all files from templates

    Hello, I recently purchased Adobe After Effects CC, and i've been using Videoblocks.com for some After Effects templates. I've used them before on a different computer running AE CS6, and they work perfectly fine. However on my computer, it does not convert the files in order to be compatible with the CC Version, like this:
    And when the project is opened, it appears like this:
    As if the files never fully converted over, however some do? Any explanation on how I could fix this from not happening? Would greatly appreciate it.

    Hey Mylenium, I reinstalled Quicktime and the problem still seems to be there. I'm not really certain what other Third-Party CoDec I should install/reinstall. It doesn't seem to retrieve some JPEG and PSD files, which I have Photoshop installed as well, so I don't exactly know what I should do.
    I'm kind of new with the Creative Cloud, so apologies in advance, haha.
    http://prntscr.com/4io35x 
    Example of the file not working.

  • Converting all known systems to Unknowns

    We offer only baremetal OSD using boot key. So we blindly target all known and unknown systems (~90k systems) even while knowing most majority of imaging works on unknown systems ( new employee etc) with small percentage aimed at re-image of known systems.
    Everytime an OSD admin makes a task sequence change, we go through the policy storm across infrastructure bringing MPs down to its knees.
    So my question is what is the easiest way to make all known systems as unknown systems (ofcourse without deleting 80k records)
    I am seriously considering changing stored procedure to return MP query as imaging machine is a unknown system. I know this is unsupported etc etc. But this greatly reduces the risk of policy storm whenever new TS is advertised to all systems. Can anyone
    share some insight on this ? Is there a better way to handle this scenario given the way we use OSD? We do have process guidance to not to do TS changes during business hours etc. But all these are soft controls. I am looking for more technical solution to
    prevent targeting to known systems yet provide them option to re-image.

    you may try to select task sequence to run on specified platform which is not present in the enviornment from the advanced tab of the properties.
    Prashant Patil

  • Lightroom not showing all photos avail for import

    About a week ago, I tried to import some new photos into LR 3 (3.4.1 to be exact), and the import dialogue does not show all the photos that should be available for import.
    The files are on my hard drive and there are approximately 200 photos in the file folder. When I open LR's import dialogue to import the photos (after navigating to the proper location to import from of course), it shows me 17 of the photos in the file folder! I selected "all" instead of "new" to see if that would make a difference and it did not. I made sure I did not have "do not import suspected duplicates" checked, even closed LR and rebooted my computer.... that didn't work.
    I tried creating a new catalog to see if that would fix the issue, and it did not.
    I'm not sure what else to try, or if there is a known fix out there (having a heck of a time finding one in my internet search!)
    Any ideas/suggestions?
    Thanks!
    -KBP

    Okay, so for giggles I tried checking in the Bridge to see if that changed anything... and it only showed the few files too. So I decided to "select all" and noticed at the bottom left that it listed the balance of my photos as "hidden." I have no idea how my files got hidden, or why it was only some and not others... but at least it's all fixed now and I can get back to what I need to do in LR!

  • New outlook install not showing all email histories for some users

    Hello,
    I recently installed outlook 2013 on a windows 8 machine connected to exchange. I noticed it is not showing all the email histories for a particular user.  Is there an index that needs to be rebuilt or something?  Some users it shows a
    bunch emails for others it only shows one or two.  Thanks in advance.  

    Hi,
    Do you mean only one particular user couldn't view all messages from Outlook?
    From this sentence "Some users it shows a bunch emails for others it only shows one or two.", it seems that this issue affect some users, not only one.
    If only one user is affected by this problem, you can follow the steps below to check result.
    1. Please check if it displays all mails in OWA.
    2. And please switch between Outlook cached mode and online mode to check result.
    If some users are affected, please check database index status.
    Best regards,
    Belinda Ma
    TechNet Community Support

  • Tcode BDLS and BDLSS problem with logical system names

    Hello!
    I have following problem.
    During the SAP ECC 6.0 installation we have forgotten to give the clients the logical names.
    Now, during the customizing it is necessary to have all the tables with logical names, so I have given for all the systems a logical name.
    Now I have problem to convert all the tables that were customized without logical to such with one.
    <b>Is there some (semi)-automatical mechanism to do this or should I go to the SE16 and do it there?</b>
    Thank you very much indeed
    regards
    Thom

    Hi,
    You need to do it from SE16 or SM30
    Regards
    Sudheer

  • "Font not found on the system" for work logo font

    I just started a new job and every single AI file I work with in illustrator is using VTypewriterRoyal - the company logo.
    It automatically defaults to Myriad with the msg:
    "Font not found on the system; missing font has been substituted."
    I've spent way too much time changing it back from Myriad once in AI + scouring the web for answers. Haven't come up with any.
    No one else at work seems to have this problem. I've tried installing and uninstalling the font.
    Redownloading as OTF instead of TTF.
    Nothing is working, so I really really hope someone can help me since I'm going to be considered slow if I keep having to take the time to change every ******* file I open.
    Adobe support is seemingly overly complicated and this issue is making me crazy!!!
    Someone please help. I'm on a brand new iMac 27" using 10.6.8....
    Thanks.

    check your spelling/spacing
    I see
    VTypewriter Royal
    and
    VTypewriterRoyal
    They are different names...one has a space, the other does not
    They must match exactly to work correctly

Maybe you are looking for