BI 7.01 BEx report/workbok Time_Out Errors
Hi,
Our BEx reports/workbooks are failing with time_out error's. Below are the time_out error details: BEx workbooks are executed through VB Script.
Some days they run fine and some days they time_out.
The program "CL_RSDRH_HIER_CACHE===========CP" has exceeded the maximum
permitted runtime without
interruption and has therefore been terminated.
Programs with long runtime should generally be started as background
jobs. If this is not possible, you can increase the system profile
parameter "rdisp/max_wprun_time".
Depending on the cause of the error, you may have to take one of the
following measures:
- Endless loop: Correct program;
- Dataset resulting from database access is too large:
Instead of "SELECT * ... ENDSELECT", use "SELECT * INTO internal table
(for example);
- Database has unsuitable index: Check index generation.
If the error occures in a non-modified SAP program, you may be able to
find an interim solution in an SAP Note.
If you have access to SAP Notes, carry out a search with the following
keywords:
"TIME_OUT" " "
"CL_RSDRH_HIER_CACHE===========CP" or "CL_RSDRH_HIER_CACHE===========CM00D"
"ADD_MEM"
Other time_out error's as below:
1) The program "SAPLRSDRC_SPLIT" has exceeded the maximum permitted runtime
without
interruption and has therefore been terminated.
Termination occurred in the ABAP program "SAPLRSDRC_SPLIT" - in "SELAGGR_GET2".
The main program was "SAPMSSY1 ".
In the source code you have the termination point in line 1101
of the (Include) program "LRSDRC_SPLITF01".
2) The program "CL_RSDRH_HIER_CACHE===========CP" has exceeded the maximum
permitted runtime without
interruption and has therefore been terminated.
Termination occurred in the ABAP program "CL_RSDRH_HIER_CACHE===========CP" -
in "CHECK".
The main program was "SAPMSSY1 ".
In the source code you have the termination point in line 80
of the (Include) program "CL_RSDRH_HIER_CACHE===========CM001".
3) The program "SAPLRSDRC_SPLIT" has exceeded the maximum permitted runtime
without
interruption and has therefore been terminated.
Termination occurred in the ABAP program "SAPLRSDRC_SPLIT" - in
"SELDR_TO_AGGROBJ".
The main program was "SAPMSSY1 ".
In the source code you have the termination point in line 214
of the (Include) program "LRSDRC_SPLITF01".
4) The program "SAPLSENA" has exceeded the maximum permitted runtime without
interruption and has therefore been terminated.
Termination occurred in the ABAP program "SAPLSENA" - in "FLUSH_PACKAGE".
The main program was "SAPMSSY1 ".
In the source code you have the termination point in line 229
of the (Include) program "LSENAF01".
Recently we have increased the parameter "rdisp/max_wprun_time" from 5400 to 7200 Seconds.
Pl. advise.
Hello,
I think this is quite easy.
Execute the report SAP_DROP_TMP_TABLES (via SE38 transaction) and the issue should be solved.
For more details, see notes 698280 and 1139396.
Let me know if persist.
Best Regards,
Edward John
Similar Messages
-
Bex report displays text Error in the result
Hello,
In my bex query result the text ERROR is displayed beside the value of a keyfigure.
I'm not able to figure why this appears and how to find the error.
Thanks.This is due to the absense of unit/currency against the key figure in the info provider.
Maitain the currency/unit and then run the report. This should rectify the report error.
Naveen.A -
BI 7.01 BEx report/workbokTime_Out Errors
Hi,
Our BEx reports/workbooks are failing with time_out error's. Below are the time_out error details: BEx workbooks are executed through VB Script.
Some days they run fine and some days they time_out.
The program "CL_RSDRH_HIER_CACHE===========CP" has exceeded the maximum
permitted runtime without
interruption and has therefore been terminated.
Programs with long runtime should generally be started as background
jobs. If this is not possible, you can increase the system profile
parameter "rdisp/max_wprun_time".
Depending on the cause of the error, you may have to take one of the
following measures:
- Endless loop: Correct program;
- Dataset resulting from database access is too large:
Instead of "SELECT * ... ENDSELECT", use "SELECT * INTO internal table
(for example);
- Database has unsuitable index: Check index generation.
If the error occures in a non-modified SAP program, you may be able to
find an interim solution in an SAP Note.
If you have access to SAP Notes, carry out a search with the following
keywords:
"TIME_OUT" " "
"CL_RSDRH_HIER_CACHE===========CP" or "CL_RSDRH_HIER_CACHE===========CM00D"
"ADD_MEM"
Other time_out error's as below:
The program "SAPLRSDRC_SPLIT" has exceeded the maximum permitted runtime
without
interruption and has therefore been terminated.
Termination occurred in the ABAP program "SAPLRSDRC_SPLIT" - in "SELAGGR_GET2".
The main program was "SAPMSSY1 ".
In the source code you have the termination point in line 1101
of the (Include) program "LRSDRC_SPLITF01".
The program "CL_RSDRH_HIER_CACHE===========CP" has exceeded the maximum
permitted runtime without
interruption and has therefore been terminated.
Termination occurred in the ABAP program "CL_RSDRH_HIER_CACHE===========CP" -
in "CHECK".
The main program was "SAPMSSY1 ".
In the source code you have the termination point in line 80
of the (Include) program "CL_RSDRH_HIER_CACHE===========CM001".
The program "SAPLRSDRC_SPLIT" has exceeded the maximum permitted runtime
without
interruption and has therefore been terminated.
Termination occurred in the ABAP program "SAPLRSDRC_SPLIT" - in
"SELDR_TO_AGGROBJ".
The main program was "SAPMSSY1 ".
In the source code you have the termination point in line 214
of the (Include) program "LRSDRC_SPLITF01".
The program "SAPLSENA" has exceeded the maximum permitted runtime without
interruption and has therefore been terminated.
Termination occurred in the ABAP program "SAPLSENA" - in "FLUSH_PACKAGE".
The main program was "SAPMSSY1 ".
In the source code you have the termination point in line 229
of the (Include) program "LSENAF01".
The parameter "rdisp/max_wprun_time" is set at 7200 Seconds.
Pl. suggest how to resolve.Hello,
I think this is quite easy.
Execute the report SAP_DROP_TMP_TABLES (via SE38 transaction) and the issue should be solved.
For more details, see notes 698280 and 1139396.
Let me know if persist.
Best Regards,
Edward John -
RFC connection Error While run BEx Report
Hi All
I got BI 7.0 and create new user with roles only access: TR: RRMX to see only BEx Reporting... I create basically new customize role and put only one transcation code RRMX and assigned to user...
When goto BEx designer I got that error
rfc error received user has no rfc authorization for function group syst.
I am not sure what kind of authrouzation user need to only view BEx Reporting...
But when I put SAP_ALL in that profile same user, thats works fine, but I don't want to give SAP_ALL to user...
2nd question same look like BEx Analyzer the side bar when I click open nothing happend and it writedown like German language..
Please advisedHi Alls
I am Angeline again, I resolved that problem and want to shair with you guys....
1. Tr: PFCG and click on Maintain roles
2. Role Name: Z_RUN_QUERIES
3. Click on Authorization Tab Saved Entry
4. In Edit mode Select the template: S_RS_RREPU and adopt reference (Business Content)
5. Expand u2018Business Explorer u2013 Componentsu2019
6. Selected: u201CType of a reporting component Calculated key figure, query restricted
7. key figure u2013 template structure and click on Edit
8. Un-Check REP Query
9. Generate the Profile
10. Create Transport number
11. click on user TAB and define user name in it
12. click User compare and complete compare and saved the entry
13. TR: SU01 in User click on Roles and define Z_RUN_QUERIES and profile
Thanks -
Error Message in BEx Report Designer 7.0
I am getting the following error message when I try to add a data provider (Query) to BEx Report Designer:
RSBOLAP 017 Java Communication Error: RFC destination NOT_CONFIGURED does not exist
Would anyone be able to provide feedback on what to do?Hi Selva Kumar,
Its a Basis Issue , report to a Basis asministrator about the configuration of Report Designer .
For info refer this link:
https://forums.sdn.sap.com/click.jspa?searchID=21289661&messageID=6734602
Cheers,
Tanish -
TIME_OUT error while executing an ABAP report
Hi All,
I have an ABAP report in which the code looks like below
LOOP AT pernr_tab . " *Internal table consists of around 25k records*
IF last_run_date IS INITIAL. " Initial Load
PERFORM fill_data USING pernr_tab-pernr last_run_date CHANGING lv_flag.
lv_flag = 'x'.
initial_count = initial_count + 1.
ELSE.
PERFORM fill_data USING pernr_tab-pernr last_run_date CHANGING lv_flag.
IF pernr_tab-status EQ '3' AND pernr_tab-begda GE today. " Future Hire records during delta load
lv_flag = 'x'.
ENDIF.
IF lv_flag EQ 'x'.
delta_change_count = delta_change_count + 1.
ENDIF.
ENDIF.
IF lv_flag = 'x'. "initial load or changes in some infotype for delta load
PERFORM append_data.
CLEAR: p0000_tab[],p0000,p0001_tab[],p0001,p0002_tab[],p0002,p0006_tab[],p0006,p0006_phone,
p0007_tab[],p0007,p0027_tab[],p0027,p0032_tab[],p0032,p0105_tab_usr[],p0041_tab[],p0041.
CLEAR: p0105_usr,p0105_tab_ven[],p0105_ven,p0105_tab_mgr[],p0105_mgr,p0709_tab[],p0709,pos_id,
functional_title,p0521_tab[],p0521,p2001_tab[],p2001,corporate_band_code,corporate_title_code,wa_pernr_tab.
ENDIF.
ENDLOOP.
inside the loop i am fetching data from 10 different infotypes and adding into another internal table.When I execute this program it is giving TIME_OUT error.Is there any way i can resolve this issue(I dont want to run this program in the background)
Thanks
Bala Duvvuri
Edited by: Bala Duvvuri on Jul 13, 2010 8:25 AM
Edited by: Thomas Zloch on Jul 13, 2010 4:58 PM - line width reducedfill_data
reading 10 infotypes
call function 'HR_READ_INFOTYPE'
exporting
* TCLAS = 'A'
pernr = p_pernr_tab_pernr
infty = '0000'
begda = '18000101'
endda = '99991231'
* bypass_buffer = 'X'
tables
infty_tab = p0000_tab
exceptions
infty_not_found = 1
others = 2
if sy-subrc <> 0.
endif.
if p0000_tab[] is not initial.
sort p0000_tab by endda descending.
read table p0000_tab into p0000 index 1.
if p0000-aedtm ge last_run_date.
lv_flag = 'X' ." Infotype 0 has been changed
endif.
endif.
append_data
assigning 50 different fields from above infotypes to ls_emp_data
ls_emp_data-functional_title = functional_title.
ls_emp_data-last_update = today.
if ( p2001-awart = '5006' and p2001-begda <= today and p2001-endda >= today ) or
( p0521-atzph = 'AB' AND p0521-begda <= today AND p0521-endda >= today ).
ls_emp_data-absent = text-007.
ELSE.
ls_emp_data-absent = text-008.
ENDIF.
ls_emp_data-corporate_band_code = corporate_band_code.
ls_emp_data-corporate_title_code = corporate_title_code.
APPEND ls_emp_data TO lt_emp_data.
CLEAR:ls_emp_data,lv_flag.
Thanks
Bala Duvvuri
Edited by: Thomas Zloch on Jul 14, 2010 2:48 PM - code tags added -
Error while opening BEx reports
Hello Gurus,
I got a problem with BEx reports. When I tried to open the BI reports in BEx Analyzer, its giving the following error.
"Characteristic 0TCKAKYFNM does not exist. Check authorizations"
I got this problem only with the Production server. All the rpeorts worked fine in DEV and QA servers.
When checked, there is no infoobject named "0TCKAKYFNM" exists in the system.
Also we have checked with Basis people for any authorization object with the name 0TCKAKYFNM but of no use.
We are using BI7.0
Any suggestions will be of great use.
Rgds
KumarHi Kumar,
Check the 0TCAKYFNM objcet properties - i.e Display the Char and goto Tab - Business Explorer.
If the Authorization relevant filed is checked then by default your object can be used to provide data level authorizations.
If this object is included in your infoprovider then you need to provide the values or '*' in the analysis authorization object.
If you r not using any authhorizations, then plz uncheck the 'authorization relevant' checkbox in the object properties.
Regards,
Geeta -
We are facing error while executing Bex report.
Hi Gurus:
We are facing error while executing Bex report.
Messge :
u201CQuery 0: Runtime error program state check for conversation 05284411 / CP with parallel processing via RFC
Message no. DBMAN428u201D
The query is based upon Multiprovider (based upon 2 basic cubes).
Both cubes are partitioned by info object 0CALMONTH, (valid range - 01.2005 - 012.2010).
Those cubes are not containing any non-cumulative key figures and Service package level for SAP NetWeaver BI 7.0 is u2018SAPKW70012u2019.
I have checked those cubes in RSRV and carry out following steps:
"All Elementary Tests -> Transaction Data" and execute the repair "Consistency of the Time Dimension for an Info Cube"
I have found system inconsistency like u201CRecord with the DIMID 2 contains non-fitting time characteristics u201C
Detail ERROR:
Record with the DIMID 2 contains non-fitting time characteristics
Message no. RSCV053Diagnosis
The data record of the time dimension table with the described DIMID contains values for time characteristics that do not fit together.
I have found the u2018 Note 1130450 - Query displays error DBMAN 284; RSRV: Time dimension checku2019 for this but still not sure this will work or not .
I tested this in dev server , didn't feel useful.
Could you please let us know what to correct this error.
Anwser will be rewared.
Regards,>
Surendra Pande wrote:
> Anwser will be rewared.
> Regards,
Go read the RULES of these forums. -
Bex Report Designer: Error while loading metadata
hi experts,
I am working with BI7 Bex Report Designer and we are using SP9. when i tried to load the Query in Report Designer its giving below error.
Error while loading metadata.
Check the Query and portal settings.(but the query is working fine in Analyzer).
and its giving message class RSBOLAP, message number 018 and Description is java system error: incoming call is not authorized.
when i double click the error its giving below error details.
Diagnosis
An error occurred in the BI components on the SAP J2EE Engine.
System Response
Procedure
Contact your system administrator to have the error analyzed in detail.
Procedure for System Administration
Start the Visual Administrator, log on to the SAP J2EE Engine and choose "<J2EE_SID>" ->"Server" -> "Services" -> "Log Viewer".
The file "defaultTrace.trc" includes detailed information about the error that occurred. In Windows, you can find this file in the Log Viewer under "Cluster <computer name>" -> "Server <server number>" -> "<drive>:\usr\sap\<SID>\JC<INSTANCE>\j2ee\cluster\server<NUMBER>\log". ". In Unix, the file is located under "/usr/sap/<SID>/JC<INSTANCE>/j2ee/cluster/server<NUMBER>/log".
If the file does not include enough detail about the error, you can increase the log level to obtain more information. To do this, choose "<J2EE_SID>" -> "Server" -> "Services" -> "Log Configurator". On the "Locations" tab page, choose "com" -> "sap" -> "ip" -> "bi" -> "webapplications". Using the selection list on the right side of the screen, you can increase the log level, whereby "DEBUG" represents the log level with the most information. You can save your settings by choosing the "Save" icon. The change to the log level is active immediately. Once you have successfully analyzed the error, you should set the log level back to its default value using the appropriate pushbutton; continuous writing to the log file negatively affects the overall performance of the system.
could you plz suggest me how to rectify the problem.
regards
vadlamudiHi vadlamudi
The error message RSBOLAP 018 means, that the ABAP stack can't communicate with the Java Stack.
1) Please ensure, that the user, used for the Report Designer, is valid in the Portal too. Depending on the user management setup this means that there either needs to be the same user or an assigned user in the Portal.
2) In case the user is valid, it means a basic misconfiguration according to note 937697. In this case please run the Support Desk Tool and ensure, that all checks are green. Please ensure, that the latest version of the Support Desk Tool is used.
Regards,
Janine -
TIME_OUT error while trying to execute a report
Hi all,
When I try to exceute a Z report using a particular variant, it displays the output.
However, when another person tries to run the same Z report using the same variant, it gives a TIME_OUT error.
ABAP runtime errors TIME_OUT
Time limit exceeded.
Please let me know the reason for this.
Thanks and regards,
AnishurHi Anishur,
Is the TIME OUT occuring on the same client as you are running the report? And if so, does the user have the same authorisation as you? The TIME OUT will occur if the program is handling more data, if you are seeing different performance it will be down to the amount of data process.
As others have suggested, look at improving the performance of the report.
Regards,
Nick -
HI BW guru's.
Iam executing a zreport in BEX, which is showing up all the vales that are there in the cube, except one master data attribute. when I check in master data contents it is having the values in it. But in the BEX all the values for the column shows upo as "ERROR".
can any one explain me what went wrong and what needs to be done in order to display the values of the master data in the query.
Thanks in Advance,
Dilse...
HarishHI Pals,
Thanks Siggi and Dirk, I ahve checked both the options which you ahve suggested. But still the could not overcome.
As to our earlier mails I have checked that data is available for 0base_uom.
I shall explain my problem once again so that you have a clear cut idea.
When I am executing a material master data query, the quantity of valuated stock ( 0VALSTCKQTY ) field in the report is showing as an error.
This field 0VALSTCKQTY is a key figure attribute to ZMAT_ACC ( Master data infoobject ). All the values of 0VALSTCKQTY are populated in BW but I am not sure why these values are not displaying in the report and all the values in the report shows an error. Currently I am investigating on this why its happening. This is very important to proceed further.
Thanks in advance,
Dilse...
Harish -
In BEx Report Designer, I keep getting short dumps and timeouts when trying to design flashy reports.
I keep getting 2 errors when I time out:
1. 'Query (view) definition cannot be retrieved from Portal.
Please try again or check query and Portal Setup!
Time limit exceeded.
2. xxx Error when reading Query (via BICS)
Please check query and Portal setup!
Time limit exceeded.
We are running ECC 6.0, BI2004s, and SEM 6.0. All in Sandbox/Dev environment.
We are NOT running EP.
I am aware that we have some memory issues, and we're adding 4Gb more on Thursday....can the solution be that simple, or are these errors telling me we need Portals installed? I was under the impression that Portals were NOT required for 2004s, so long as you did not use WAD etc.
Any thoughts??You would need to install portals(EP) for the report designer to work. When you design your flashy report in designer and try it launch it... it would try to connect to EP to publish it. It bombs when it doesnt find the portal.
On a personal note: Report designer have a long way to go when you think the output would be something like crystal .. NO not yet ... But SAP just got started ... I think they would be there pretty soon. And they promise many enhancements as of SP 13.. so lets all wait. -
Error Transporting FI ODS with Bex Reporting On
Hello,
We are getting error
"Value Xxxxx for characteristic 0INV_DOC_NO is invalid".
"Value Xxxxx for characteristic 0REF_DOC_NO is invalid".
"Value Xxxxx for characteristic 0REF_KEY1 is invalid".
"Value Xxxxx for characteristic 0REF_KEY2 is invalid".
"Value Xxxxx for characteristic 0TXTLG is invalid".
"Value Xx#xx# for characteristic zsmthg is invalid".
in transport log while activation fo ODS, we have only checked Bex reporting flag to report on ODS and
are trying to move the request to production .
This ODS has approximately 14,000,0000 and upper level cube is working fine for reports.
Any Ideas for this error message ?
Thanks
OoopsHi,
when activating your ODS for reporting, the system will generate master data SIDs for all IObjs of your ODS.
In other words, your ODS was prior this setting just a table with fields not usable in reporting thus not checked when loaded.
Now the system is checking each value of the IObj and verify that it complies with the IObj rules (lower case not allowed, special characters allowed in Tx RSKC, and so on...).
If the values are fine, the system will create this master data and corresponding SIDs for all IObjs if they aren't created yet)...
All these checks are performed because you now want to report on this ODS, therefore the system will link your ODS table fields an their corresponding IObjs...
I suggest to copy your ODS to another; enable the reporting flag on the copy and start loading some data from the original to the copy and escalate the several issue you will face one by one.
Hope this helps
Olivier. -
Hi all.
I create a report iin Bex Query designer.
When the final user execute the report occurs the error:
Embedded image moved to file: pic08833.jpg
I have the company icon in my reports. I think that this is the problem.
Some one can help-me?
Regards.
MarceloHi KK.
Thanks for your help.
I'm close the thread to some points.
Best Regards.
Marcelo -
Client Out of Memory error when running bex report
Hi,
when i am running a finance report which got complex selection in the bex i am getting Error " Client Out of Memory" which terminates report processing.
I request you to through some light on following questions
1. is this problem related to user system or bi server
2 is there any settings or allocation of memory in bi server and where can we do that
with Advance thanks
Sarath KumarWell, probably yoru query is very big.....
Are you using 0ANALYSIS_PATTERN as default template?
This template uses "paging" and avoid these kind of situations.
Also, there is a note which threats this problem
1127156 - Safety belt: Result set is too large
Cheers
John
Maybe you are looking for
-
Error while running adf application(wrong post)
Hi while running a simple adf application on jdev11g i am getting following error: ServerInstance1 startup time: 25355 ms. ServerInstance1 started.[Running application HRSystem on Server Instance ServerInstance1...] [12:52:51 AM] ---- Deployment star
-
Can't set web photo as desktop background
Hi everyone, I've had my pro for 4 years now, and I used to be able to use any web engine (normally I use google chrome and firefox) and click on a photo on the web and have the option to make it my desktop background. For whatever reason, that optio
-
CS5 - how to delete artboard AND the art on it
Hello! Is there a way to delete an artboard and everything on it with one command? I always have to do <shift><o> and <delete> for the artboard, then <esc> and select the art to delete it.
-
Merging Crystal Report output files (rpt) into 1 rpt file.
Hi All, Is there any way to merge output/result of multiple CR files into one output file (like .rpt)? Or any technique you can advise as a workaround? I want to do this for archiving purposes and batch printing or .rpt files. Thanks in advance. -Al
-
Does anybody know if Snow Leopard has drivers for fingerprint reader devices, in particular the Microsoft USB Fingerprint reader?