BI 7 Inventory Cube: Duplicated Data

HI Gurus,
Im working with BI 7 and i have activated standard cube (with transformations).I did the following steps:
1)Fill setup tables for BF and BX extractor (we dont use UM)
2)Load BX, compression without checked marker update.
3)Execute a report and the values were OK.
4)Load BF, compression with marker update checked
5)Execute a report and Quantity Total Stock was ok, but Receipt Total Stock was duplicated.
ANy idea? please !!!!!
Regards

Hi Nicola,
0TOTALSTCK (Quantity Total Stock) is calculated by IN and OUTFLOW key figures (0ISSTOTSTCK and 0RECTOTSTCK) in BW.
If your Quantity Total Stock is matching, then receipt quantity should be perfect.
Try to filter with stock type, stock categories, special stock indicator. It should match.
You have configured inventory in a right way and hence stock is correct.
Thanks

Similar Messages

Inventory cube 0ic_c03 data validation

Hi,
We loaded the data to 0IC_C03( according to the document).
Now we r validating the valuated stock in both R/3 and BW.
Some of the materials r matched,some are not.
We r using MB5L,MC.9,MC.1,MB5B For the validation from R/3.
Thanks

Hi,
1) Check whether you have provided any kind of selection while extracting the data or not.
2) Check whether the materials which are not matching / present are present in PSA or not.
3) Also, check in start routine(if it is written).
Hope this helps.
PB

DataMart from Inventory Cube (0IC_C03)

I want to use the daily inventory cube to data mart and load to a cube/ods otherwise. I am aware that the values of non cumulative kf will not be available but that is okay I need the value of the cumulative kf.
Is there any issues or problems that people can see if I data mart from this cube? Thanks

Hi Niten,
Check this link:
http://help.sap.com/saphelp_nw04/helpdata/en/8f/da1640dc88e769e10000000a155106/content.htm
Also check the Integartion (last) section in this link:
http://help.sap.com/saphelp_nw04/helpdata/en/80/1a62dee07211d2acb80000e829fbfe/frameset.htm
Bye
Dinesh

Inventory cube 0IC_C03 ,Stock on particular date

Hi All,
   We are trying to get the stock on a particular date using cube 0IC_C03 ,but we are unable to get the total stock on a given date.
1)Ex: I want stock on 01.12.2009 ,but in the query output I am getting null values.
I am only getting the total stock quantity on the loaded date for ex:04.01.2010(which is my data loading date in to the cube).
2)And when we restrict 0calday with <=01.12.2009 ,i have to get the total stock till 01.12.2009
Thanks&regards,
Sunitha

Hi,
Check
Treatment of historical full loads with Inventory cube
Setting up material movement/inventory with limit locking time
1)Ex: I want stock on 01.12.2009 ,but in the query output I am getting null values.
   I am only getting the total stock quantity on the loaded date for ex:04.01.2010(which is my data loading date in to the cube).
For 2LIS_03_BX it will give the extracted date only
2)And when we restrict 0calday with <=01.12.2009 ,i have to get the total stock till 01.12.2009
try with below options.
Use :
0VALSTCKVAL   " for Value
0VALSTCKQTY   " for Qty
0CALMONTH        " for Month
Use the above combinations in New Selections in columns and go it.
For Qty Opening:
New Selection bad drag abd drop following things
0VALSTCKQTY   " for Qty
0CALMONTH        " for Month and restrict with less then or equalto option variable (single value, user input) and set the offeset
                               value = -1 bcoz if user will give 12.2009 , so it will display 11.2009 closing stock, this is opening for 12.2009.
For Qty Closing:
New Selection bad drag abd drop following things
0VALSTCKQTY   " for Qty
0CALMONTH        " for Month and restrict with less then or equalto option variable (single value, user input) .
In the same way build for Value and other Keyfigures on 0IC_C03.
And
Drag & drop
0MATERAIL
0PLANT " Give some Input Variable.
See the steps.
Treatment of historical full loads with Inventory cube
Setting up material movement/inventory with limit locking time
If it is BI 7 then for BX in in DTP in Extraction Tab you need to select Extacrion mode = NON-Cumulative option.
Thanks
Reddy

Inventory data load from Inventory Cube to another Copy Cube

Hello Experts,
I am trying to load Inventory data from the Inventory cube(say YCINV) to a copy cube say YCOPY_CINV(copy of Inventory cube), but the results appear inconsistant when I compare the reports on these 2 cubes. I am trying to populate a fiield in copy cube so that I can populate the same data back to the original cube with the new field in it, I am doing this reload back and forth for historical data purpose only.
I have seen lot of posts as how to run the setups for Inventory data, but my case does not need to perform set up runs.
Does the note 1426533 solve the issue of loading from one cube to another ? we are on SAP BI 7.01 with SP 06 ,but the note specifies SP 07 ?
I have tried note 375098 to see if it works, but I do not see the options as mentioned from step "Using DTP (BW 7.x)" in BI to perform this note
Please advise on whether to go with implementing note 1426533 or is there any other way to load inventory data from one cube to other.
Regards,
JB

Hi Luis,
Thanks for your reply,
I do not see any setting like Intial stock in DTP except "initial non-cumulative for non- cumulative". I did try using the option "initial non-cumulative for non- cumulative" ,but the results still do not match with the inventory cube data.I do not see the check box for marker in the copy cube (under roll up tab). Please let me know if we can really implement this solution ,i.e. copying from inventory cube to copy cube and then re-loading it back to inventory cube for historical data. Currenlty, I am comparing the queries on these 2 cubes, if the data matches then I can go ahead and implement it in Production, other wise it would not be wise to do so .
Regards,
JB

Inventory Cube - Historical Movement Data

Hi experts
In the Inventory Cube 0IC_C03 there seem to some problem with the Historical Movement Data. Now I want to execcute the Query by ignoring the Historical Data. My question is
1. How can I ignore the historical movent and execute a query on Inventory Cube.
2. Can i get the correct Closing balance.
Thanks in advance.
Dinesh Sharma

Hi,
For 0IC_C03, you can't execute the reports without proper Historical data. If you run reports without proper dataloads, you can't get good results. Because all keyfigures are Non-Cumulative Keyfigures, so you must habe proper data in 0IC_C03. It is not like a 0SD_C03 Cube, here you can restrict Month or day then run the reports, but in case of 0IC_C03, you must have perfect data.
See the following URLs.
Treatment of historical full loads with Inventory cube
Setting up material movement/inventory with limit locking time
Thanks
Reddy

Data from ODS and a Inventory cube

Hi Guys,
We have an Inventory Cube zic_c03, and ODS which has some detailed information like batch level information.
There is a MultiProvider on top of these two.
My question is can we use a cube on top of the ODS and feed that into the Multi Provider.
Will that improve performance on queries.
What are the drawbacks or repercussions I need to understand first.
Thanks a lot in advance for your help.

Hi Murali,
Yes, if you load into a cube from your ODS you can improve performance. I typically load data that can be summarized into the cube and cut out document numbers, line items, etc... If you need the detail, then just jump to a query off of the ODS objects' MP.
The drawbacks are that you no longer get all of your detailed information at the cube level.
Thanks,
Brian

Deletion of Data in Inventory Cube -Effect of Marker

Hi,
We would like to delete some OLD data from our Inventory cube,Will it effect the Marker.If yes, how and is there any way out where we can find out where the marker has been set i.e upto what request or to which date,any table which stores the marker update or method by which we will come to know as to where the marker is set.Suggest apart from running the Report which has non cumulative KFs.
Scenerio.
I have loaded data for 4 month,(say Jan,Feb,March and April ) in Inventory cube,say each month one request so 4 requests all together. I will compress all three OLD requests (for Jan ,Feb and March) which r OLD and I keep the latest uncompressed (April). The compression happens with Marker update only(Without the Check).we are running the report to check the change in values.
Suppose if I delete data of Feb, Will my Marker get Effected ???
Rgds
SVU

Hi SVU123,
We would like to delete some OLD data from our Inventory cube.
Will it effect the Marker.If yes, how and is there any way out where we can find out where the marker has been set i.e upto what request or to which date,any table which stores the marker update or method by which we will come to know as to where the marker is set.Suggest apart from running the Report which has non cumulative KFs.
I think, this you can check in /BI0/L0IC_C03. For each plant/material (validity determining characteristic) you will have two record maintained in this table. The record with request SID = 1 will tell you when the marker was last updated for that plant/material.
I think, all the marker values are stored as reciept cumulative key figures with 0CALDAY as 31/12/9999. Check, if this is the case in List cube/ Efact table(not sure on Efact table though).
Deletion should not disturb the marker value if the restriction of material and 0CALDAY is given.
This will avoid deletion of the marker value, which I assume is stored in 31/12/9999.
Also, ensure that you are not deleting the values which have not been used in Marker calculation,(dates greater than dates when the marker was last compressed
Suggest you to check the whole deltion in Quality or make a copy cube in production and work on repairiing it.
Scenerio.
I have loaded data for 4 month,(say Jan,Feb,March and April ) in Inventory cube,say each month one request so 4 requests all together. I will compress all three OLD requests (for Jan ,Feb and March) which r OLD and I keep the latest uncompressed (April). The compression happens with Marker update only(Without the Check).we are running the report to check the change in values.
Suppose if I delete data of Feb, Will my Marker get Effected ???
I think, it shouldn't. But I suggest you to try this before..
Hope this helps,
Best regards,
Sunmit.

Data Update Error in Inventory Cube

Hi All,
I am able to Load the data from InfoSource 2LIS_03_BX in the inventory cube, but when I tried to Load data from InfoSource 2LIS_03_BF in the Inv. cube, where thing seems to be fine QM Status is also Green but the data is not getting updated in the cube.
What can be the reason for data no getting updated in the cube.
Regards,
Dev.

hi,
i am sending you the following links which consists some PDF's for Inventory control.it will give better understanding
http://help.sap.com/saphelp_nw04/helpdata/en/5b/8dc73cee4fb55be10000000a114084/content.htm
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sapportals.km.docs/documents/a1-8-4/how to handle inventory management scenarios in bw.pdf
http://www.horizons.bc.ca/ice/icemanual1_4.pdf
reward if its useful
Naveen

Corrupt data in inventory cube

Hi ,,
I have posted a couple of times before with regards to missing plants and corrupt data in our inventory cube.
However , after an initialisation the query shows the correct results,, this continues for a couple of months then it gets corrupted again..
After further analysis ,, we have realised that there is a movement type that is not coming through( 651 - returns ).
I have tested the extractor with rsa3 which proved that the extractor is not picking up that movement type...
I am not sure how to debug this further ,, why wouldn't the standard extractor pick up this movement type,, is there any config that needs to be turned on ?
has anyone experienced this problem before,, any suggestions would be very much appreciated ..
Best regards
Fahed

?

Step by Step Loading data to ( 0IC_C03) inventory cube

Hi Guys ,
We are loading data to inventory cube today ( 0IC_C03) .Can you please let me know the steps to load the data .I have some documents but every document is having a different procedure .
Regards
Santosh

Hi,
http://wiki.sdn.sap.com/wiki/display/BI/StepbyStepLoadingDatatoInventory+Cube
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/906b837a-0d54-2c10-08b8-bde70337547e?QuickLink=index&overridelayout=true
Thanks
BVR

Inventory Cube Compression - Non-Cumulative

Dear All
I have loaded setup tables in R/3
BX as on date             TAC MCNB1
BF i.e. Historical         TAC OLI1BW
UM                            TAC OLIZBW
I have loaded the Inventory Cube form all the three Data Sources
2LIS_03_BX : Initial Status
2LIS_03_BF : Initialization
2LIS_03_UM : Initialization
The queries are <b>fine without compression</b>
I have compressed the cube
2LIS_03_BX : with marker update
2LIS_03_BF : without marker update
2LIS_03_UM : without marker update
After compression the data for Stock issues in 24,36,48,60 months is giving vague values i.e.. IT IS ADDING UP ALL THE PREVIOUS VALUES TO SHOW FINAL VALUE
WHAT ARE THE SETTINGS TO BE MADE FOR COMPRESSION OF NON-CUMULATIVE CUBES ?
AM I MISSING ANYTHING (STEPS) ?
Thanks & Regards
Daniel

Dear Anil
I have followed the same procedure
i.e.
BX-init: Compression with marker update
BF-init: Compression without marker update
UM-init: Compression without marker update
BF-delta loads: Compression with marker update
UM-delta loads: Compression with marker update
But surprisingly the values are not reflecting correctly
Thanks & Regards
Daniel

Inventory cube non cumulative KF displaying incorrectly.

Hi
I have created a inventory cube which is a copy of 0IC_C03, fed from a DSO which has the all the Material documents.
I have intitialised using the BX extraxctor to the cube, then loading data from r/3 via the dso. Have MP on top of inventory and revaluation cube.
Due to an error in the code logic i had to drop the cube and reload the data from the BX PSA and subsequently the DSO.
my problem started then, the cumulative key figure have gone haywire ie they the balance display rubbish data. the data loaded into the cube is correct
also if I delete the latest request and reload the request, then the KF display correctly. strange!
I also the same problem for value as i have a revaluation cube. the inventory values are wrong, when i do a list cube from the MP all is ok.
i checked the validity slice rsdv, it is ok.
i also only have 0calday as the non cumulative setting.
Another thing i noticed was if filter the material by one plant then i get the correct value, if i try to display all plants then it all the balances go incorrect.
also if i see the balances by month only the latest month is incorrect.
if you need more info please feel free to ask.
appreciate if some can propose a solution
Lawrence
Edited by: lcoelho on Oct 14, 2011 7:03 PM

Hi Lawrence,
SAP suggests to upload non-cumulatives NEVER from a DSO but from the PSA in parallel to DSO and Cube.
Andreas

Inventory cube - non cumulativekey fig values are showing -ve values

Hi Guru's,
For Improving the performance of inventory cube *0IC_C03
The following steps i did:
1) Created History cube by taking a copy of actual cube (0IC_C03).
2) Transferred all the four years of data (2007, 2008, 2009, 2010) to history cube(4 yr data) as a back up to do clustering and for cube remodelling.
3) After doing all these, loaded the current 3 years (2008, 2009, 2010)data back to the actual cube and kept one year data in the history cube (2007) (i.e maintained only recent 3yrs data in actual cube).
5) Created a multiprovider includes actual and history cubes and populated the existing report on top of the multiprovider.
6) After purging one year data from the actual cube, stock values in the reports are showing negative values
7) To clear that issue i loaded the 2007 year data back to the actual cube (now the cube has all years data as it was before) to avoid the negative stock value, but again stock values are showing negative values.
How to solve this issues in inventory cube..
how too eliminate the negative value in reports which was working prperly before data purging( removing the first year data from the actual cube)

Hi prayog.. 10q for answering... Yeah i went 2 the data targets. And the forumlae is already wrriten like this IF( Debit/Credit = 'H', Qty in OUn, ( 1- * Qty in OUn ) ) for Actual Consum. K.F and IF( Debit/Credit = 'H', Amt. in local curr., ( 1- * Amt. in local curr. ) ) for Amount.....
So i already said that from one of the infosource the data is flowing through ODS and then 2 CUBE. So i checked out the data in ODS with the movement type and posting date as per in the Report.. I selected the 'Debit/Credit' = H and Movement type and Posting date... But in ODS o/p the keyfig's are not displayed..... This is the problem...
Cheers,
Hemanth Aluri...

Non Cumulative Inventory Cube Remodel

Hello Gurus,
I've existing inventory cube with non-cumulative key figures with large amount of data. We are using standard non cumulative key figures 0TOTALSTCK, 0ISSTOTSTCK & 0RECTOTSTCK.
Now I've a new requirement to report issues (0ISSTOTSTCK) & receipts (0RECTOTSTCK) based only on LB. Right now they both are in base UOM. Converting them in LB in query (on the fly) is not an option because of volume / performance of report.
I'm planning to do this in backend by adding two more key figures for issues & receipts where i'll convert standard ones in LB. I'm not going to touch any of existing non cumulative key figures. But the overall structure (F table) is going to change.
I'm concerned whether this will work? Any risks? Marker updates?
Thanks.
Abhijeet

Please have a look
http://sap.seo-gym.com/inventory.pdf

BI 7 Inventory Cube: Duplicated Data

Similar Messages

Maybe you are looking for