BI 7 Upgrade - Problem with Authorisation Variable on Compounded Char

Dear All,
We have just upgraded our DEV environment from 3.5 to BI7 and have encountered a weird problem with 1 of our authorization variables.
Our authorization check variable checks the values from a table that the users are allowed to use (which includes the selection screen). There are 2 variables 1 for the uncompounded char and 1 for the compounded char, the uncompounded variable is working just fine but not the other. When the user tries to pick a value, they are presented with not just their restricted list but ALL the values.
Can anyone explain this? Has BI 7 changes the way authorizations work with Compounded Characteristics ?
Before anyone asks, these variables work just fine on 3.5 and are working just fine in our QA and PRD environments.
Help required urgently.
Thanks
Craig

Hi,
Yes authorisations in BI 7.0 are a bit different from the ones in BW 3.5. Here is the link which will help you know every thing in BI 7.0
bw 7.0
Regards,
Habeeb
Assign points if helpful.

Similar Messages

Problem with formula variable

HI,
I am facing problem with formula variable with replacement path. my requirement is system date - posting date.
here i created 2 formula variable one is system date. second formula vaiable with replacement path is posting date. second formula vaiable not populating data. please help on that.
regards,
kris

Hi,
here is some idea.. here i have taken expample dates 1)notification creation date and 2) notification completion.
1st:in the query designer at key figure coloumn create
one local formula.in that local formula create formula
variable with replacement path.in that take reference character
notification completion.in the next tab take replace ment
as key.in the last tab select "date".
2nd: do the same thing for the notification creation date.
3 rd : create 3 rd local formula and do the substraction
for the first 2 local formulas.
4th:create codition on the difference which u have find with
on that condition u can create one user entry varibale.
5th:while u defining the query put these 2 dates,i,e
notification completion, notification creation date in the character block.
If not system will ignore the formula variable which u created in
above steps.
Hope this wil help u.
regards....KP

Problem with String variable

I am new to Java Programming.
I have a line of code that works and does what is supposed to.
faceData.getProfile("Lisa").removeFriend("Curtis");
If I assign the strings to variables such as-
String name = "Lisa";
String fName = "Curtis";
and then plug those into the same line of code, it does not work
faceData.getProfile(name).removeFriend(fName);
What could be causing the problem?
I even added some lines to print out what is stored in the variables to verify that they are what they should be, but for some reason the variables do not work while putting the strings in quotes does. Any ideas?

I guarantee that something about your assertions are incorrect. Those variables are either not equal to the values you claim, or something else is going on. But it's not a problem with string variables versus string constants.
Edit: My best guess in lack of a real example from you, is that the strings in question have non-printable characters in them, such as trailing spaces or line feeds.

TPC 2012 - Problems with shared variable

Hi,
I tried to program simmilar thing to this one http://zone.ni.com/devzone/cda/tut/p/id/5548 on TPC 2012. But it doesn't work.I can see that both programs on my laptop and TPC are working(I've added an additional counter with display), but I cannot see any effect on TPC when I change the value of shared variable on my laptop. I use LabView 8.6 with Touch Panel Module. My question is what are the exact steps to run such application on TPC2012? Are they the same as for TPC 2006?
I've noticed following issues:
1.I cannot deploy the program from Project Manager(there is an information that maybe TPC Service is not started. - I've found such information about TPC Service http://digital.ni.com/public.nsf/allkb/DE177828D27A14A48625734E00768B66 but in fact I cannot find Start » All Programs»National Instruments » NI TPC Service » NI TPC Service Manager 1.0 Does it mean, that the TPC Service is not installed and the programm with shared varibles won't be working or can I start it somehow in another way? Do I need to have TPC service installed on TPC2012?
Until now, I've built the project and sent it through FTP to TPC(the folder was /TEMP) and then started it.
2.Ping works OK
Thank you in advance for any hints how to solve this problem.
Martin

Well no problem, but I'm frustrated with this issue... I've tested many things and nothing. Just to help someone else as I in the future, these are my sources:
http://forums.ni.com/t5/LabVIEW/TPC-2012-Problems-with-shared-variable/m-p/1009631/highlight/false#M...
http://digital.ni.com/public.nsf/allkb/28536DE7E2D9E98B8625770B00738920?OpenDocument
http://zone.ni.com/reference/en-XX/help/372507B-01/lvtpcgsm/tpc_install_sharvar/
http://zone.ni.com/reference/en-XX/help/372507C-01/lvtpcgsm/tpc_install_sharvar/
http://digital.ni.com/public.nsf/allkb/23532363F4905EC28625727A00730B80?OpenDocument
http://forums.ni.com/t5/FieldPoint-Family/TPC-2006-Not-Listed-in-Targets-and-Devices/td-p/566325
http://forums.ni.com/t5/LabVIEW/MAX-can-t-detect-TPC-2106T/td-p/831524
http://zone.ni.com/devzone/cda/tut/p/id/5868
http://digital.ni.com/public.nsf/websearch/28B748B9697B79E18625725A00009066?OpenDocument
http://digital.ni.com/public.nsf/websearch/D1726990DCEB82E4862570F20069C57D?OpenDocument
http://digital.ni.com/public.nsf/allkb/3B469103BBDD4CE48625726000665B36
I hope find some hint..
Fabian León
Certified LabVIEW Associate Developer

Graphic Upgrade Problem with K430 desktop - Unresolved!

Hi,
Xmas 2012 I purchased a Lenovo IdeaCentre K430 Desktop from PC world.
PC World said it would be upgradable if I need to upgrade it.
The system is:
Intel Core i7-3770 CPU @ 3.40GHz
16.0 GB DDR3
1.8 TB Hardrive
Windows 8
Geforce GT 640
I recently purchased Crysis 3 and its not running very well, so I brought a Geforce GTX 660.
However when I installed and rebooted the PC, I was greated with a blank flashing screen?
other people have simular problems on the GeForce forums.
I have since took the card back PLUS 3 MORE for a refund, and very dissapointed that I can't upgrade this PC.
CAN SOMEONE AT LENOVO PLEASE REPLY WITH A LIST OF 'MODERN/LATEST GRAPHIC CARDS, THAT ARE COMPATIBLE WITH THIS MODEL STRAIGHT OUT OF THE BOX?
CHANGING THE BIOS SETTINGS DOES NOT WORK FOR ME!
It's been almost 2 years and I've still not found a compatible card, so much for the Ultimate Upgradable PC!
Cheers.

The previous message thread you posted in has one recommendation of what worked in the K430. See the post #34 in this discussion.......
https://forums.lenovo.com/t5/Lenovo-E-H-K-M-Q-and-ErazerX/Graphic-Upgrade-Problem-with-K430-desktop/...
Owner & Operator of the following:
● Lenovo Ideapad Z570 w/ Win 7 & Win 8.1 Dual Boot ● Lenovo Yoga 3 Pro w/ Windows 8.1 ● Toshiba A75-S206 w/ Win 7
● IBM Thinkpad T-23 w/ Win XP ● IBM Thinkpad T-22 w/ Win XP • As well as multiple desktops dual/triple booting XP, Vista and Win 7.
★ Find a post helpful? Thank that member by clicking on the ☆Star☆ to the left awarding them a Kudo.
★ Posting a problem and a reply is helpful and it answers your question, please mark it as an "Accepted Solution"
★ I'm not a Lenovo employee, just a volunteer geek who likes to help folks. Enjoy your time here, pay it forward by helping others !
★ Sorry, I don't answer questions via Private Messages. Posting in the appropriate forum is the best way to get assistance.

Problems with /tmp variable

Hi,
I'm writing a shell script and I seem to be having problems with a variable that is creates a directory in the /tmp directory. Essentially, there are several points where various parts of the script call out information that gets exported to that directory. My script is failing upon creation of this directory, is there any specific permissions on the /tmp directory in mac that would need to be set before something like this occurred?
Thanks!

My script is failing upon creation of this directory
Maybe you could post your code, that way we can see how you're trying to create the directory and may be able to spot the problem. As it is we're working blind, and that's not easy.

Problem with environment variables

JAVA_HOME = C:\JBuilder9\jdk1.4
Path = C:\oracle\product\10.1.0\Db_1\bin;C:\oracle\product\10.1.0\Db_1\jre\1.4.2\bin;C:\oracle\product\10.1.0\Db_1\jre\1.4.2\bin\client;%SystemRoot%\system32;%SystemRoot%;%SystemRoot%\System32\Wbem;.;C:\oracle1\product\10.1.0\Db_3\jdbc\lib\classes12.zip
When I run foo.java I get this error, which i believe is because of some kind
of problem with environment variables.
Exception in thread "main" java.lang.NoClassDefFoundError: OraThinI eliminated this path
C:\oracle\product\10.1.0\Db_1\jre\1.4.2\bin
just to check whether two paths of jdk bin folder is causing problem but I see no change.
Please help

I had solved it myself
I am a genious :P
Just do this
JAVA_HOME = C:\JBuilder9\jdk1.4
CLASSPATH = C:\oracle\product\10.1.0\Db_1\jdbc\lib\classes12.zip;.;%JAVA_HOME%\bin
PATH= C:\oracle\product\10.1.0\Db_1\bin;C:\oracle\product\10.1.0\Db_1\jre\1.4.2\bin;C:\oracle\product\10.1.0\Db_1\jre\1.4.2\bin\client;%SystemRoot%\system32;%SystemRoot%;%SystemRoot%\System32\Wbem;.;C:\oracle1\product\10.1.0\Db_3\jdbc\lib\classes12.zip;%JAVA_HOME%\bin

10.6.8 Upgrade Problems with Google Display Error post install

Hi -- I just upgraded my IMac to 10.6.8 in anctipation of migrating to Mountain Lion later this week.   While the installation went very smoothly, it seems I am having a problem with the Google display.    When I open Google, the search box has no lines around it and when I enter the box, it jumps to the Google search in the menu bar, and I can't read what I'm typing.
I've tried a multitude of other sites where there are search boxes, log in boxes, etc, but I am only having problems with Google.   Any thoughts?
Model:                         IMac 9,1
Processor Speed:         3.06 GHz
# Processors:               1
Total # of Cores:           2
L2 Cache:                    6 MB
Memory:                         4 GB
Bus Speed:                    1.07 GHz
Thanks
Bill

boy these forums really help you out. having similar issue and no one seems to have a clue why 10.6.8 screws everything up. I did notice the active directory plugin version changed from 6.5 to 6.5.1. They did something.

Problem with application-variables - CFLOCK?

Hi,
i have a problem with my application. It is a multi-user
application with 100 parallel-users and CFMX 7.
The problem wich occures is with application variables. These
are mainly structs wich get filled onApplicationStart(). The
problem is, that the variables suddenly disappear, they are empty.
I have read about CFLock and found out, that it is necesseary
to use cflock. And i found out, that onApplicationStart does
correct locking automatically. That is where i do not understand
the problem. The variables get intialized correctly and in further
they only get read-access. Why can they be corrupted?
My other question about that is, wheather i need cflock for
all Read-Access to Application and Session-Variables, even if there
happens no writing to the variables?
Best Regards,
Andreas

> ?The element of position 2, of dimension 2, of an array
object used as part of
> an expression, cannot be found.?
> The array is in this case the struct.
Well, OK, that could be a problem. Arrays are not structs:
they are two
different things, are not interchangeable, and have
completely different
sets of functions to utilise them. You cannot treat a struct
as an array.
If CF is claiming your "struct" is an array, then it actually
*is* an
array, not a struct.
What's the line of code which is generating that error?
I suppose one could get this error if you have an array of
structs thus:
myArray
.key1
myArray.key2
(etc)
and you're trying to reference it with a numeric key rather
than by key
name, eg:
myArray
[n]
When n is an integer value, rather than a string (which
corresponds to the
name of the key).
> > Have you trapped the error, done a <cfdump>
of the application scope and
> > checked to see if it's the whole lot going awry, or
just some values?
> I have not used cfdump for it, because the server had to
be immediately
> restarted for our customers. But i think, that it is
not completely empty,
> because the index runs to pos2 of dimenstion2.
So does this not happen in your dev / testing environment?
> Will
> onApplicationStart() be called before? Or only if
onRequestStart() returns true?
I would ***-u-me that the application one would be called
before the
request one. It's pretty easy for you to test this though, I
should think?
(Sorry: for reasons beyond the scope of this conversation,
we're still
forced to use Application.cfm in our software, so I've only a
passing
knowledge of how Application.cfc works).
> Here is the code from onRequestStart()
> <cffunction name="onRequestStart"
returntype="boolean">
> <cfargument name="Requestedpage" required="yes" />
> <cfscript>
> var lFile = "/cargorent/Login.cfm";
> var iPosn = ListFindNoCase( lFile,
Arguments.Requestedpage );
> if( iPosn gt 0 )
> return true;
>
> if( NOT IsDefined( "session.user.Loginname" ) or
session.user.Loginname eq
> "" )
> {
> WriteOutput( "<p><p> The current user is no
longer valid, please log in
> again.</p></p>" & chr(10) & chr(13)
> WriteOutput( "<script
language=""javascript"">parent.location = ""
http://"
> & CGI.HTTP_HOST &
"/Login/Login.cfm"";</script>" );
> return false;
> }
>
> return true;
> </cfscript>
> </cffunction>
One thing I will say here is that I really think you should
be separating
your processing from your display. A function should do
processing. it
should pass that processing back to a CFM template which
should handle
whatever needs to be displayed on the browser. Although
that's nowt to do
with your current issue.
Adam

Problem with hierarchy variable while displaying query in Portal

Hi,
I came up with an problem with a query in the portal. The problem is :
I have one query which is displayed in the portal. The Query has hierarchial selection criteria. I am executing the same query using analyzer. Its taking the variable from the selection and displaying it on the analyzer. I have used the option to " display the query on web " from the BEX query designer. From there its opening and displaying the results with the given selection criteria.
Where as when i open the query seperately in portal, its not displaying the results.
I came to know from one of my colleague that the porblem is with the Web item and the hierarchial variable declared in WAD was different from the variable declared in the BEX Query designer.
I never Worked with WAD. I tried finding out the variable definition. But i was unable to find out where the Hierarchial variable was defined.
Please help me out regarding the same.

The problem is sovled.
Poornima.

Problem with substitution variable

Hi All,
I am facing problem with usage of substitutiion variable. I have following code in my script
Edited by: Tarak on Mar 4, 2009 3:27 AM

sorry I missed the script.
create table tempdata
(description varchar2(200))
TABLESPACE &tspacename
/Sqlplus is not asking for the value of tspacename.I am getting following error.
TABLESPACE &tspacename
ERROR at line 3:
ORA-02216: tablespace name expectedI am not sure what is wrong with SQLPLUS setting.Can anybody help?

Upgrade problems with vista

Just loaded Itunes newest version to my vista system and now when I play songs they become choppy. It may play great for about 5 minutes then it will become choppy for about 5 to 10 seconds then play fine.
My other laptop with xp plays perfect with the same exact library. Wondering if any else has similiar issues.

I think because the upgrade that was just created for vista is so new maybe the bugs havent all been worked out yet. I plan on waiting a while before downloading it to my new vista laptop. I'm a little paranoid because I don't want to have any problems with it so soon.

Having problem with setting variable on a textfield

I'm using createTextField to create a textfield. I have also created a input textfield with a variable called textline1 (I don't create the inputfield with as).
I want to display the letters in the created textfiled that I'm typing in the input field. So this in my AS coed:
_root.createTextField("text1",1,100,100,300,100);
text1.variable = textline1;
format1 = new TextFormat();
format1.color = 0xff0000;
format1.size = 50;
format1.bullet = false;
text1.setTextFormat(format1);
but it doesn't work. So anyone see the problem?
(sorry for bad english)

i think you're going to have more problems if you continue using textfield variables. you should not use them. just use the text property of the textfield to reference its contents.
but, if you want to continue, use:
var tl:MovieClip=this;
fontsize=20;
myInputText_txt.onChanged = function(text1:TextField) {
_root.myText_mc.createTextField("text_txt",1,100,100, 100,100);
_root.myText_mc.text_txt.variable = tl["text2"];
text2=text1.text;
format1 = new TextFormat();
format1.color = 0xff0000;
format1.size = fontsize;
format1.bullet = false;
text_txt.setTextFormat(format1);
p.s. please mark this thread as answered.

Purchased ColdFusion 10: Having problem with session variables

My Dept. has just bought CF10 and I'm finally updating my existing web app to CF10 from CF8. My First Problem with CF10 is using session variables.
When using the lower version of CF (since CF 4 to 8) I have never had any problem setting up session variables and getting or using these variables in other pages after a successful login but with CF 10 it seems setting session variables and using them in other pages are a major problems. I'm not sure where have I done wrong in the codes.
First I'm setting the session in my Application.cfc This way:
<cfcomponent displayname="Application" output="true">
<cfset THIS.Name ="MyNewApp"/>
<cfset THIS.ApplicationTimeout = CreateTimeSpan(0,0,20,0) />
<cfset THIS.SessionManagement ="YES"/>
<cfset THIS.SessionTimeout = CreateTimeSpan( 0, 0, 20, 0 ) />
<cfset THIS.SetClientCookies = false />
<cffunction name="OnApplicationStart" access="public" returntype="boolean" output="false">
<cfset application.Main_DSN = "TESTDB">
<cfreturn true />
</cffunction>
<cffunction name="onApplicationEnd" output="false">
      <cfargument name="applicationScope" required="true">
    </cffunction>
<cffunction name="OnSessionStart" access="public" returntype="void" output="false" hint="Fires when user session initializes.">
<cfset session.loggedin = "NO">
<cfset session.username = "">
<cfset session.userrights = "">
<cfset session.usergroup = "">
</cffunction>
</cfcomponent>
After login, user is validated and set values to those session.variables:
........user validation codes here......................
<cfif mylogin NEQ true>
      <cflocation url="/login/login.cfm">
      <cfabort
<cfelse>
      <cfset session.loggedin="Yes">
      <cfset session.username="#Trim(Form.username)#">
     <CFSET qUserRights = LoginObj.getUserRights('#Trim(Form.username)#')>
     <cfset session.userrights = qUserRights>
    <CFSET qUserGroup = LoginObj.getUserGroup('#Trim(Form.username)#')>
        <cfloop query="qUserGroup">
           <cfset session.usergroup = user_group>
           <cfbreak>
        </cfloop>
    
   <cfdump var="#session.loggedin#">
   <cfdump var="#session.username#">
   <cfdump var="#session.userright#">
   <cfdump var="#session.usergroup#">
</cfif>
In index.cfm, Before Login I got:
session.loggedin = NO
session.username = ["empty string"]
session.userrights = ["empty string"]
session.usergroup = ["empty string"]
After a successful Login:
session.loggedin = NO
session.username = ["empty string"]
session.userrights = ["empty string"]
session.usergroup = ["empty string"]
Have I done something wrong? These codes work on CF8. Please help.
I need to mentioned:
CF10 is in Linux and my web app is under https not http. But these session variables should be shared bentween http and https because some older application are still in http.

On which page is the following code?
After login, user is validated and set values to those session.variables:
........user validation codes here......................
<cfif mylogin NEQ true>
      <cflocation url="/login/login.cfm">
      <cfabort
<cfelse>
      <cfset session.loggedin="Yes">
      <cfset session.username="#Trim(Form.username)#">
     <CFSET qUserRights = LoginObj.getUserRights('#Trim(Form.username)#')>
     <cfset session.userrights = qUserRights>
    <CFSET qUserGroup = LoginObj.getUserGroup('#Trim(Form.username)#')>
        <cfloop query="qUserGroup">
           <cfset session.usergroup = user_group>
           <cfbreak>
        </cfloop>
    
   <cfdump var="#session.loggedin#">
   <cfdump var="#session.username#">
   <cfdump var="#session.userright#">
   <cfdump var="#session.usergroup#">
</cfif>

Problem with passing variable to restful uri's.

I have a restful URI in the format http://localhost/functionname/{itemID}. I use this URI to retrieve JSON formatted information. Through Flash Builder 4 data services I create an operation that makes use of this URI and I also hame itemID a URL parameter. The problem is that whenever I call this function from my program Flex uses the following URI instead " http://localhost/functionname/%7BitemID%7C" in other words it doesnt replace the "{itemID}" with my variable. I am using SDK 3.4 to compile. Is this a known bug and if yes how can I circumvent it? Please notice that the project needs to compile using SDK 3.4 no matter what. Thank you for reading.

Depending on how you set it up, it isn't clear that the compiler will see
as a binding expression. What does your code look like that sets
it up?

BI 7 Upgrade - Problem with Authorisation Variable on Compounded Char

Similar Messages

Maybe you are looking for