BI admin cockpit - how to install the BI content Web templates

Hi Gurus,
We have installed BI admin cockpit. we have also installed Bex required queries. now I wanted to install all web templates (SAP format 3.x) in BI content. after installing I checked WAD but I cannot see them their also when I go to metadata repository I cannot see templates, I only see this message:
"Object '0QUERY_TEMPLATE' (0QUERY_TEMPLATE) of type 'Web Template (Format SAP BW 3.x)' is not available in version 'A'"
Is it maybe we are on SAP 7.01, what would be the steps to install the web templates successfully?
thank you all for your help and have a nice day.
thank you

Hi Stefanie ,
If you have installed Admincockpit , then the corresponding web templates should be available in the system .
1. Anyways if the web-templates are missing , then try to run the admincockpit installation once more using the
tcode - RSTCC_INST_BIAC and check whether you get the webtempaltes in 'A' version or not .
2. If the webtemplates are still not available , then you can install them manually in tcode - RSORBCT.
a> Go to tcode - RSORBCT.
b> Locate the field Query Elements . Drill down to Query and then select "Select Objects".
c> In the new pop-up window , locate the "Business Information Warehouse" and then drill down to "BI Statistics".
d> You can find all the Statistics infoproviders under "BI Statistics" and the queries build upon them .
e> Select all the queries for a particular infoprovider and then select transfer .
f> After the required queries have been transferred to the third window , select the option 'DataFlow Before and AFterwards' under the Grouping Tab .
g> After the grouping has been done , you can check that the web templates associated with the query have been collected .
h> Then choose install .
i> Repeat these steps for all the Statistics infoproviders .
j> This will make all the statistics webtemplates available.
k> As the Statistics webtemplates are 3.x , you can execute them in SE38 report - RS_TEMPLATE_MAINTAIN for testing .
Regards,
Lokesh

Similar Messages

How to install the Business Content Cube 0PP_C02

Hello,
Can you please explain me how to install the Business Content Cube 0PP_C02 .
What are the nesessary steps involved in this process. How this Standard Cube is available in
AWB -> Modeling.
What are the nesessary steps involved in the R/3 side.
CAn you please help me in this.
Thanks alot.
Regards,
Anitha

Hi anitha
TRy this
To transfer and activate a DataSource delivered by SAP with Business Content, in transaction SBIW in the source system choose Business Information Warehouse à Business Content DataSources or Activating SAP Business Content àTransfer Business Content DataSources.
The following figure displays the DataSources in an overview according to the application component.
       2.      Select the nodes in the application component hierarchy for which you want to transfer DataSources into the active version. Do so by positioning the cursor on the node and choosing Highlight Subtree.
The DataSources lying under the subtree and other subtrees are selected.
       3.      To check for differences between the active and delivery versions of the DataSources, choose Select Delta.
DataSources for which differences were found in the check (for example, due to changes to the extractor) are highlighted in yellow.
       4.      To analyze the differences between active and delivered versions of a particular DataSource, select the DataSource and choose Version Comparison. The application log contains further information regarding the version comparison.
       5.      To transfer a DataSource from the delivery version into the active version, select it in the overview tree using the button Highlight Subtree and choose Transfer DataSources.
If an error occurs, the error log appears.
Regardless of whether data has been successfully transferred into the active version, you can call the log by choosing Display Log.
       6.      To provide the active version of the DataSource in the connected BI systems and to enable data extraction and transfer, replicate the DataSource(s) with a metadata upload to the BI system.
and in RSA1 in businuess content search ur required cube and select all the req fielsds in the next colums and select before and after is a must..in the selection field..
this will solve ur issue..
Prasanna

How to install the FRMI to Web Server 7.0

Hi I need a little help, which is like being able to install the service FRMI web server,
when the installation made the mistake of telling it not to install the service for the initialization
at system start up.
How can I add it to boot,
Web Server version
root@msfront1 # /opt/SUNWwbsvr7/lib/webservd -v
Sun Microsystems, Inc.
Sun Java System Web Server 7.0 B12/04/2006 10:15
OS
root@msfront1 # cat /etc/release
Solaris 10 11/06 s10s_u3wos_10 SPARC
Copyright 2006 Sun Microsystems, Inc. All Rights Reserved.
Use is subject to license terms.
Assembled 14 November 2006
Edited by: arosbar on 08-04-2009 09:39 AM

hope you installed the web server as a root user. if you have done, it is easy to take it from there . you can use wadm create-server
<install-root>/bin/wadm create-server user=admin .. config=.. --node=<hostname> <hostname>
finally, you should able to start/stop using Solaris 10 SVCS commands like
svcs -a | grep http
svcadm enable -s https-.. (for server instance)
if you chose enabling SMF during installation, you can do so for admin server a well. (so that you can start/stop using commands like svcadm enable -s admin-server)

I just bought a new computer and want to load in photoshop from the old one. I have CS5. Since CS5 was an upgrade I installed CS4 first, but now I can't figure out how to install the CS5 upgrade. Any advice?

How do I transfer photoshop from one computer to another? I have CS5. Since CS5 was an upgrade I installed CS4 first, but now I cannot figure out how to install the CS5 upgrade. Any advice?

karen2179 wrote:
If you are able to use adobe products on two computer do I really need to deactivate or uninstall CS4?
No, but it may help the chances of a successful installation.
karen2179 wrote:
Just as an aside - I have been getting messages on here from Adobe Admin saying that CS5 cannot be reinstalled because everything is now in the cloud and that for $350 I can buy CS6 to install on my new computer. What? Am I getting spammed on Adobe's site here?
Where did you see that?

How to install the Recovery Catalog

Hi:
How to install the recovery catalog? I used the following commands from the menu and it didn't work:
connect rman/rman
@?/rdbms/admin/catrman
There is no catrman.sql exists.
Thank you very much.

If you are using Oracle8i, make sure your compatibility is set to at least 8.1.0 and you are connected to the catalog database. Then type create catalog; at the RMAN command line.

How to install the SAP Java Connector

Hi,
I am unsure how to install the SAP Java Connector on Linux (Suse Linux Enterprise 10). The SAP Integration Kit install and admin guide says:
===
u2022 Copy the librfccm library and the libsapjcorfc library to busines
sobjects_root/enterprise120/PLATFORM_PATH, where busines
sobjects_root is the full path to your businessobjects directory,
and PLATFORM_PATH is your platform. For example, PLATFORM_PATH
is solaris_sparc for an installation on Solaris.
u2022 Use symbolic links for the location of the librfccm library and the lib
sapjcorfc library.
u2022 Add the location of the librfccm library and the libsapjcorfc library
to the library path.
===
Do I have to do all 3 steps or is the 1st one (copying of files) enough?
On the other hand, the SAP Java Connector guide says:
===
Then add {sapjco-install-path} to the LD_LIBRARY_PATH environment variable.
Finally, add {sapjco-install-path}/sapjco.jar to your CLASSPATH environment variable.
===
So, what to do?
Thanks!

Thanks for your help. So i copied the 2 files as mentioned in point 1.
Where do I have to copy the file sapjco.jar to? There is no shared lib folder after installing BO Edge 3.1 on a Linux system.
I copied the sapjco.jar to /bobje/tomcat/common/lib but still get the message that the Java Connector files are not in the correct directory.
I already copied the files librfccm.so and libsapjcorfc.so to /bobje/enterprise120/linux_x86 .
Thanks again!
Edit: problem solved: Copying the sapjco.so to tomcat/shared/lib is correct, if the directory doesn't exist then just create it (mkdir). The message is just plain information 7 hint.

How to install the JDI and what re the prerequisites

Hi All,
Anybody tell me ,
AS iam new to the SAP NetWeaver
How to install the JDI,
I have got one document in sdn . It has given the prerequisite as.
Complete installation of DI (CMS, DTR, and CBS) on SAP J2EE Engine
Should i install all the above component? or any one of the components, if need to be, can u anbody tell me how to install , where i will get the help.
How i need to setup the JDI.
We are working on Webdynpro, and VC, some of the portal components development.
Installing the DTR alone is enough to move forward, or JDI is required to setup?
Please repsond me.
Regards
Vijay

Hi Krishna thanks for the reply,
Our Current Portal Version is
NetWeaver 2004s SP 11.
My question, should we need to install all these following components before we setup the JDI.
Complete installation of DI (CMS, DTR, and CBS) on SAP J2EE Engine.
or
As per your reply , my understanding is , By installing the JDI , i will be getting all the above components.
BCZ in that document it is gving clearly that, the above components are prerequisites for installing the JDI.
Can u tell me where i will get that service packs in the service market place.
Regards
Vijay

How to install the Remote Desktop Services role on a Windows 2012 R2 Server

Hello,
I am a bit confused on how to install the RDP role on a 2012 R2 server. I have a two server domain and would like to make the second member server an RDP server to host applications (Word, Excel, a medical software, etc.) where users from their windows
7 desktop will use the Remote Desktop Connection to connect to the server, create a session and do their work. When installing the role, I am prompted with two options:
1- Role-based or feature based installation
2- Remote Desktop services installation
I see the RDP install option in both cases.
1- Which one do I use?
2- What role services do I install? (Connection broker, Gateway, Licensing, Session Host, Virtualization host and Web access). I think I need the first four only.
3- When installing software after RDP, I use the Change user /install and Change user /execute commands. What happens to the software that is already installed? Can remote
users use those?
Any help will be very much appreciated.
Thank You,
Victor.

TP,
Thank you for your response. I added the RD Licensing thru the Role-based option.
Also opened the local group policy thru gpedit.msc and added the server name and the licensing mode type to Computer Configuration -> Administrative Templates -> Windows Components -> Remote Desktop Services -> Remote Desktop Session
Host -> Licensing
Use the specified RD license servers = NameOfMyServer
Set the Remote Desktop licensing mode = TypeOfMyLicense (Per User in my case)
Thank you again,
Victor

How to install The Soundblaster Audigy SE in Windows 7 RC?

:How to install The Soundblaster Audigy SE in Windows 7 RC?Y Two days ago I bought a Soundblaster Audigy SE-retail soundcard. I have a dual boot PC with Windows XP-SP3 and Windows 7 RC. The installation of the soundcard?in Windows XP was easy, no problems, good sound.
But how to install in Windows 7 RC ?
I have the installation and applications CD with XP and Vista drivers and I have the driver-download from Creative.com SB24PCDRV LB 0 - 04 - 0090.
Windows 7 tells me "No device for audio output is installed". Windows automaticly?installed a driver, but that doesn't work. (code 39). The driver download from?creative does not install new drivers and when I try it manually Windows tells me "The best driver is already installed"
When I uninstall?the driver that Windows installed and try to install the downloaded?creative driver for Windows 7, the driver will not install, and Windows message is something like "?no audio device is installed on this computer"
What to do ? A computer without sound is nothing...
Thanks,
Arie

>Re: How to install The Soundblaster Audigy SE in Windows 7 RC?% Meocene is 00% on the money. Dan K.'s pack is the best. I have used the pack on four different systems with AUDIGY LS and SE cards that I bought cheaply (all four on Ebay for $40). The package has worked under XP, Vista, and Windows 7 very well.
I have friends that play Left4Dead and they have been immensely pleased when playing the games in their flats with or without headphones, as compared to their old "onboard RE--t-k" sound.
The package also works well on a Gateway or HP machine when disabling onboard audio first then installing the Audigy and installing drivers and apps for the first time. Gi've up on using your old CDs, you will only run into a mountain of trouble trying to "Auto-Update" all that with the newest patches.

How to install the SAPRouter service on a Windows 2003 Server?

Hi, can someone please either provide me with the instructions or point me to a URL or a SAP note that describes how to install the SAPRouter service on a Windows 2003 32-bit server?
This is fairly urgent so your assistance here would be much appreciated.
Many thanks
Sharon

I tried this and I get the following error...
'ntscmgr' is not recognized as an internal or external command, operable program or batch file.
Any further suggestions?
S

Hi, can anyone please tell me how to install the Nik collection into Adobe Photoshop CC 2014.2.1

Hi, can anyone please tell me how to install the Nik collection into Adobe Photoshop CC 2014.2.1 ?

Glad I could help. Thanks for letting me know I did.
Gene

How to install the camera raw plug in?

how to install the camera raw plug in?

Hi Andreaid,
An easy way is to go to Help>Updates in whatever program you have that includes camera raw like Photoshop or Bridge.
Thanks,
- Dave

How to install the windows7 agent and monitor the same machine

Hi ,
I have installed OMS on Oracle Linux 5.7-64 bit machine. Now I am able monitor the OIM which is installed on Linux. I have some of oracle applications (domains) on windows7 machine. I want monitor the same. On em, agent deployment page I am not able to see the windows agents.
Can you please guide me how to install the agent on windows and monitor the same?
OEM version: 11.1.0.1
Thanks in advance
Regards,
Kishore Tummeti

If you just need to install some agents on Windows the best (imho) option is not to use the push option because getting Cygwin to run can take hours (if at all).
Here you find a good instruction how to install the agent by hand: http://www.peasland.net/?p=122
Sometimes the –silent mentioned in step 4b needs not to be put as second argument but as last argument.
Eric

How to install the oracle lite mobile server?

hi,every one!
I follow the wizard of the oracle lite mobile server,then
pop the window let me input the "host name""port"and "net server name",I have install oracle 9i,and establish a database named "oradb",establish an server named"oradb",the service can be listened and the port is "1521",but in the installation when i input the up numbers, it
tells me that "invalid server name",how can i do?
somebody that do me a favor tell me how to install the oracle 9i lite mobile server,it must be preciated!

Andy,
It sounds like you are not properly connecting to the back end Oracle instance when Lite attempts to install the Mobile Server Repository.
Before attempting a re-install, why don't you try connecting to the same instance using SQL/Plus with the a connect string specifying hostname:1521:SID. If you are not able to connect you need to determine why.
TNX,
Phil

How to install the same copy of creative suite on the second computer?

Basically I am using a Macbook Pro and upgraded my hard disk. A
After I have recovered the data using time machine, I was unable to access my CS6 applications, which all became trial version. So I would like to know how to install the same copy of creative suite on the new drive.

Transferring does not usually work - you need to install using installation files, the same way you originally installed the program(s).
Download and Installation Help -
https://helpx.adobe.com/download-install.html

BI admin cockpit - how to install the BI content Web templates

Similar Messages

Maybe you are looking for