BI Admin Cockpit - Problem in activating Process Chains

Hello,
We're trying to activate the content for BI Admin Cockpit.
While activating the process chains, we get a "red" message as
mentioned below.
"Object '0PAK_5JTN7F5HTP45CGZ04PQTMCNTI' (ISIP) of type 'InfoPackage'
is not available in version 'D'
Message no. RSO252"
OSS message 966131 suggests that "The InfoPackages mentioned are shadow
InfoPackages and the message is unnecessary because there should not
have been a search for the package at all." and we should apply the
correction (as part of SPS10) for this purpose.
We are currently on SP11 but still having the same issue and hence not
able to activate the process chains for BI Admin Cockpit.
Thanks for your help with this.
Ashish

Hi Ashish,
We had the same issue. You must have one of following:-
BI_CONT 702, Support pack 7
or
BI_CONT 703, Support Pack 4
Once you get either of above, you will not have that problem. But you might have some problem in process chains because of roll up of aggregate in delta PC. Just ignore that and you will be OK...( This problem is because there is no agg. defined and PC is trying to do roll up..which make no sense and hence there is error)
Also refer to OSS note 965386
This is my first answer to SDN...so assign my first points..:)
Thanks,
Anil

Similar Messages

Problem in activating Process chain in Quality after transport

Hi All,
We have moved a set of process chain to Quality system.
When tried to activate the Process chain it is showing error in DTP.
The DTP name is same as in the Dev system.
So, we tried moving the DTP alone in another transport request.
Still the error exists. We also tried moving the process chain again.
We had tried importing only the structure and also the entire flow again.
Nothing worked.
Please suggest some solution.
Thanks in Advance,
Geetha

Thanks for yor reply.
Suman,
I have checked the Object Changeablity now in Dev system, I found it like Not changable for DTPA.
The DTP from DSO to Cube is fine, but we have problem with the DTP from DataSource to DSO.
Also, in the dev system when i clicked on Object Changeablity I get a popup like "System can be changed; settings not necessary".
Please suggest me like what must be done.
Prashantk & Arvind,
We imported the Process Chain along with the DTP first and we faced the problem.
So we imported the DTP alone again, but still we had the problem.
Again we imported the Process Chain after importing the DTPs.
So what i feel is DTPs must be there in the Quality, but why we have the problem persisting.
That too only for DTP from Data Source to DSO but not for the DTP from DSO to Cube.
Regards,
Geetha
Edited by: Geetha Devi Ramalingam on Jul 12, 2011 9:43 AM

Short dump while activating process chain

Please let me know the cause of short dump while activating process chain.. when trying to activate local process chains in metachain it is causing dump

Can you share more details about error.
Have you done any changes to local chain? or is this is new chain?
Try to remove meta chain from schedule, later activate your local chain and meta chain.
schedule your meta chain.

Problem with a process chain transport

Hi all,
I have a problem with a process chain transport, I transport it but when I see the changes in testing environment I dont see it, I did it four times but nothing happen and I dont have errors.
Can anybody tell me how to transport a process chain.
Thanks.

Hi Federico,
When you tranport Process Chains, initially chains will be available under "Not Asigned" node in RSPC Transaction. The transported chains wont be get highlighted automatically. Manually need to open the chain in update mode and activate it on Quality.
Hope it will help you to resolve the problem.
Regards,
Raji

Errror when activating process chain

Hi All,
Geeting the error while activing process chains in Quality.
Error is *'Node Characteristic 0classnum is not entered as hierarchy characteristic for 0material*
can any one help on this.
Thanks in Advance.
Srinivas

Hi
This is not advisable to activate a process chain in quality directly. You should do it in development and then transport it across.
This error is realated to hierarchy. Do you have a hierarchy load attached to this chain?
Check the hierarcy first. Then activate the chain.
Cheers
Chanda

Activation Process Chain, Info Objects, Transformations

Hi Experts;
Is there any function or abap program, activates inactive Process Chains, Info Objects and Transformations.
Please Advice
Regards
Bilal

Hello,
Find below some activation programs used in BI.
RSDG_CUBE_ACTIVATE      Activation of InfoCubes
RSDG_DODS_REPAIR      Activation of all ODS Objects with Navigation Attributes
RSDG_ODSO_ACTIVATE      Activation of all ODS Objects
RSDG_IOBJ_ACTIVATE      Activation of all InfoObjects
RSDG_IOBJ_REORG      Repair InfoObjects
RSDG_MPRO_ACTIVATE      Activating Multiproviders
RS_COMSTRU_ACTIVATE_ALL      Activate all inactive Communication Structures
RS_TRANSTRU_ACTIVATE_ALL      Activate Transfer Structure
RSAU_UPDR_REACTIVATE_ALL      Activate Update Rules
RRHI_HIERARCHY_ACTIVATE      Activate Hierarchies
SAP_AGGREGATES_ACTIVATE_FILL      Activating and Filling the Aggregates of an InfoCube
RS_PERS_ACTIVATE      Activating Personalization in Bex(Inactive are highlighted)
Programs for activating process chains and Transformations have not been delivered by SAP.
Regards,
Pratap Sone
Edited by: Pratap Sone on Jul 19, 2010 8:39 AM

BI Admin Cockpit: Problems with Webtemplates

Hi all,
we are currently facing the following problem:
We are on a BW system EHP1 SP5.
We did successfully install the BW Technical Content (BW Statistics) what means that all process chains are complete and running.
But we now got the problem that not all Web Template in the related BI Admin Cockpit are working. We, for example, only can access the DataLoad Statistics but not the Query runtimes...
Ifi I run the content queries in RSRT, they are executing without any problem.
So what problem do we have in this case? Is this portal based or are there wrong web templates?
Would be also great if you could post me the technical names of all required web templates for the admin cockpit.
Thanks in advance,
Regards
bivision2009

Hi Matthew,
Please check below 2 links. They might help you
http://scn.sap.com/thread/3653392
https://blogs.saphana.com/2014/01/08/new-and-improved-bw-74-on-hana-bi-41-trial-is-on-its-way/
Thanks
Ajay Daggubati.

Error while activating Process Chains

Hi all,
while activating the Process Chains, i am getting the following error "Job BI_PROCESS_PSAPROCESS could not be scheduled. Termination with returncode 8"
when i double click on the error msg, i got the following help msg: "
Message no. RSPC065
Diagnosis
Program RSPROCESS is to be scheduled as job BI_PROCESS_PSAPROCESS under user ALEREMOTE.
Can any one please show some way to solve this problem? please do this favor, i have been suffering with error for a long time.
Points will be given
Thanks
Ganesh

Hi,
Just analyze the error message that you get while activating the PC, don't give any server name.If you are trying to run process chain using Flat file, it won't work,
and you should have source system R/3 or you have own datasources in BW system itself at that toime you can use PC to extract data. If your source system is Flat ile, it won't work. other wise you should place your flat file in application server, using AL11 tcode.
OSS : 511475
Symptom
You cannot schedule or perform any batch jobs with the BW or source system background user.
The error RSPC 065 occurs in the process chains:"Job could not be scheduled, termination with return code 8"
Other terms
RSPC065
Reason and Prerequisites
The user type is
"CPIC" up to 4.6B
"Communication" as of 4.6C
This user type may not execute or start any batch jobs, irrespective of the user authorizations.
Solution
Set the type of background user to
"Background" up to 4.6B
"System" as of 4.6C
This user type corresponds to the "Communication" type and may also perform background functions.
Through the Customizing, the BW user is automatically created by mistake as a communication user.Depending on your BW system release, you can solve this problem as follows:
BW 2.0B
 Import Support Package 24 for 2.0B (BW2.0B patch24 or SAPKW20B24) into your BW system. The Support Package is available once note 456551 with the short text "SAPBWNews BW 2.0B Support Package 24", which describes this Support Package in more detail, has been released for customers.
BW 2.1C
 Import Support Package 16 for 2.1C (BW2.1C patch16 or SAPKW21C16) into your BW system. The Support Package is available once note 456566 with the short text "SAPBWNews BW 2.1C Support Package 16" has been released for customers.
BW 3.0A
 Import Support Package 8 for 3.0A (BW3.0A patch08 or SAPKW30A08) into your BW system. The Support Package is available once note 452632 with the short text "SAPBWNews BW 3.0A Support Package 08" has been released for customers.

BI Content 7.57 SP4 Activating Process Chain

Hi,
I am trying to activate a process chain from BI content . My source system is ERP 6.0. While collecting objects for activating this Process Chain BW gives an errors. It says some of DTP and Transformations are missing. I have put two of the errors are at below.
When i search these missing objects on the BI content these objects are not exist. Also on the BW system they are not exist. I could not find any solution for this problem.
Can you please show me a way for solving this. I am stuck on this.
I am trying to activate following Process Chain.
Technical Name: 0HCM_FULL_P0EMPLOYEE
Name : Load Data for InfoObject 0EMPLOYEE
Error 1:
Shadow object DTP_DYF4USYQ4EYMWILRMUGLXW2KG cannot be expanded; chain is inconsistent
Message No. RSPC142
Diagnosis
You want to determine the objects that are source system-dependent for shadow object DTP_DYF4USYQ4EYMWILRMUGLXW2KG so that they can be inserted in the modified version of the process chain or of a referencing process. This was not possible.
Error 2:
Object DTP_ETKRN0DQM7QVOBZSVBC9J61HB (Data Transfer Process,DTPA) could not be collected for object 0HCM_FULL_P0EMPLOYEE (Process Chain,RSPC)
Message No. RSO296
Diagnosis
You have collected objects in the BW Metadata Repository. Associated objects for the object 0HCM_FULL_P0EMPLOYEE of type Process Chain,RSPC have also been collected. Object DTP_ETKRN0DQM7QVOBZSVBC9J61HB of type Data Transfer Process,DTPA was among these objects. This object
DTP_ETKRN0DQM7QVOBZSVBC9J61HB of type Data Transfer Process,DTPA, is not, however, available in the Metadata Repository.
System Response
Object DTP_ETKRN0DQM7QVOBZSVBC9J61HB of type Data Transfer Process,DTPA is ignored in further collections. The links for object 0HCM_FULL_P0EMPLOYEE of type Process Chain,RSPC are incomplete. This may result in not being able to activate this object.

Hello experts
I am not able to find support package name.
When i click on package level button from SAPM tcode
BI_CONT 703 0000 - Business Intelligence Content.
Is my BI_CONT add-on installed successfully?
And also i am not able to see BI_CONT in imported packages list.

Problem with triggering process chain

Hi
We have a remote process chain that calls a process chain in another system.The process chain in the other system is not getting triggered with the remote chain.
We have 3 such remote chains and we are facing such a problem with only one of them.
The process chain in the other system has a start variant which gets triggered( i suppose) and gives an instance id...the next step in the process chain is to load data into a ODS.Now this step remains yellow forever.When i manually try to schedule this step it gives me records and the request in the monitor screen turns green.But the process chain step continues to remain yellow.
What can be a way out for triggering the process chain or where could the problem be?
Please help
Thanks,
Suchi

Hi Suchitra,
Even though ur process seems to be in yellow your data loading may be completed and the reason for it may be the delay in activation of ODs by ur PC.
For your information please go through the below infm provided in SAp Library
Note when loading into an ODS object and for the subsequent, event-controlled update:
If you switched on the automatic activation in the ODS maintenance or administration, the monitor status for the request remains yellow after the load was successfully completed. Nevertheless, the subsequent processing for the InfoPackage is started, because the loading process is successfully completed.
[http://help.sap.com/saphelp_nw04/helpdata/en/65/163d3873130057e10000009b38f842/content.htm]
I hope ur doubt is clear.
Regards,
Rajkandula

Activating Process Chains in QA System

Hi All,
i have transported objects from DEV to QA. all the objects in the QA are in active state but the process chains are not activated and they are in grey state. how to activate the process chains manually. are there any pre defined programs to activate the process chains.
Regards

Hi,
try to do the following..
Got to RSPC and there select ur chain by double clicking it, next go to the menu PROCESS and there u have option called check and activate . So this option will first try to check the consistency of ur chain and then if no problem exists it will activate it.. and in case if prob does exists it will highlight the process where it encountered teh errors..
Hope this helps..
Regards,
Pankaj

Problem in activating process chanis

Hi Experts,
I installed NW 7.0 sr3 ABAP system, and then installed BI_CONT release 703 as add-on.
But our BI consultant not able to find all the objects when he is trying to activate process chain from the bi content.
Can anyone please tell me which version i have to install to get all the necessary objects.
Thanks in advance
Uday

Hello Uday,
your BI consultant would have been trying to install the PC where it has the DTP which is not in active from Business content, please ask him to install the DTP alone and try it again to install. hope it would help.
Regards,
Venkata Boga

Problem kicking off process chains using Tivoli Job Scheduling

In our pre-production BW system testing,when the process chains are being kicked off through Tivoli,they are not working.
We dont get issues when the chains are run directly in BW,without using Tivoli.
The jobs with 'after event' RSPROCESS setting that kick off next node on each node's completion,are not leaving out a 'copy' after a scheduled run.
So in the next run from Tivoli,the dependency job isnt there in scheduled status,which fails the chain.
We tried manually copying the dependency jobs on the nodes.Doing this,chain does kick off from Tivoli.But again jobs dont leave copies and next run from
Tivoli fails.We tried using 'periodic job' setting.This leaves copies of job.But then why is BW able to copy out and kick off jobs,while this isnt happening when kicked off through Tivoli.
A node in the process chain is BLUE when it has a scheduled job ready in sm37,but turns GREY(no scheduled job is there in sm37),once the Tivoli kicks off chains after the manual copy.
We suspect this either to be a authorization problem or an issue with how it works when kicked off through Tivoli.Process chain 'context' is somehow not created when it runs through Tivoli.
Anyone seen such an issue before?Suggestions are welcome..
cheers,
Vishvesh

Hi Manfred,
The chain does get kicked off from Tivoli.
But the job fails in Tivoli as..when it tries to hand over execution to the 1st local chain in the 'meta chain' the required job isnt there in scheduled status,with the 'after event' RSPROCESS dependency set on it.
cheers,
Vishvesh

Error while activating process chains from Business Content

Hi All,
I am trying to activate the SAP Business Content Process Chains, which load data to 0PM_DSO2 in Plant Maintenance Area -
1.Delta Upload : MTTR / MTBR (0PM_DELTA_P02)
2.Initialisation : MTTR / MTBR (0PM_INIT_P01 )
And they are failing with the error
"Object 0PAK_BZJNGI4SYTTJM5DXY8IPMHB0C could not be found in version
Message no. RS_EXCEPTION280"
"Message Text
Object 0PAK_EYQGZ09K9SFFUMOFRQ0730LJ0 could not be found in version
Technical Data
Message type__________ E (Error)
Message class_________ RS_EXCEPTION (Exception Messages)
Message number________ 280
Message variable 1____
Message variable 2____ 0PAK_EYQGZ09K9SFFUMOFRQ0730LJ0
Message variable 3____
Message variable 4____ "
In the collected objects, these two infopacks are not present also.
Can you please let me know how to proceed?
Many Thanks in Advance,
Vineeth

Hi
Make sure these 2LIS_17_I0NOTIF and 2LIS_18_I0NOTIF datasources are being installed.
Check these links.
http://help.sap.com/saphelp_nw70/helpdata/EN/e7/082888ca2f994794986448568aec2d/frameset.htm
http://help.sap.com/saphelp_nw70/helpdata/EN/e7/082888ca2f994794986448568aec2d/frameset.htm
Chandu.
Edited by: Chandu on Jan 22, 2009 2:24 PM

Problem in creating process chains for CO

Hi Friends,
                 I have a CO cube "0OPA_C11" getting data from Three datasources,
those are 0CO_OM_OPA_6(supports delta), 0CO_OM_OPA_1(full only), 0CO_OM_OPA_2(full only), i have already created process chain to this cube using these three datasources, the chain is like this,
1. delete indexes
2.0CO_OM_OPA_6(supports delta
3.0CO_OM_OPA_1(full only),
4.0CO_OM_OPA_1(request overlapping)
5.0CO_OM_OPA_2(full only),
6.0CO_OM_OPA_2(request overlapping)
7.create indexes
        Is it right? here the chain is running, after completion of that, in manage of cube, it is showing only the request for 0CO_OM_OPA_2(full only), the request which were there earlier like Init request and new delta request for .0CO_OM_OPA_6, full request for 0CO_OM_OPA_1 are getting deleted, it is showing the request only for 0CO_OM_OPA_2,
the way how i created the process chain is right or wrong? can anybody give me the solution?
Thanx in Advance
BalajiReddy

Hi Nick,
          Thanx for your reply, everthing is ok what you've asked me to check, i think there is certain scenario to create the process chains for the data targets, which are getting data from multiple datasources, which support delta's as well as full.
          I want that scenario, can you tell me? or can anybody tell me?
The right points are assigned to the right answers.
Thanx in advance
balajireddy

BI Admin Cockpit - Problem in activating Process Chains

Similar Messages

Maybe you are looking for