BI Administration Cockpit - Context menu in portal

Hi,
I have turned on the technical content, I can see all the necessary process chains etc and have set the necessary cubes for collecting in RSDDSTAT.
When I execute the process chains for data loading, I get errors because of invalid characters in the data which I'm dealing with. But I thought that once you can see the admin cockpit in the portal that you could right click on stats to further drill down to see more information. When I right click on cube name for example, I can see it is a hyperlink and should give me context menu but it doesn't.
Any ideas?
Regards
Sue

Hi,
I have the same problem. Can anybody help please?
The context menu is working fine via executing in the Query Designer. Via the Web Application Designer (3x) it doesn't work. Same for the portal.
Should the context menu work anyway in the BI Cockpit?
Regards,
Patrick

Similar Messages

BI Administration Cockpit - Empty templates in portal

Hi,
Has anyone experienced the following problem:
- The BI Admin. Cockpit has been installed according to instructions without errors
- The technical content as well as the process chains are working and data is being collected from the objects pointed in RSDDSTAT
- The Business Pacakge "BI Administration 1.0" has been installed.
- Both roles (BI Admin. & System Admin.) have been assigned in portal and BI Admin -role has been assigned to user in SSM.
- The BI Admin. tab page is visible in portal and all of the IViews and pages are available in the portal content.
- If the queries or the templates are executed from BEx or WAD they are populated with data and everything is working as it should be.
- Even when executing the IViews or pages (f.ex. No. of BI Application Executions per User) in PREVIEW -mode from Portal Content Studio the reports are shown correctly.
HOWEVER: If one navigates to BI-Admin tab --> BI Usage Statistics --> BI Application Usage Statistics -report, both of the expected reports are just missing. The only things that are shown are the templates (tab strip and buttons) but the queries are missing.
There are no error messages etc. Please advice how to proceed with further investigations?
-Miikka

Hi All,
We are planning to install BI Admin Cockpit in our BI system as well. We found a lot of PDF documents on SDN, but they are more on the general terms. Can anyone share their real time experiences, plan and the exact startegy step by step to be followed to install Admin cockpit and how to use it?
The Technical content is already installed on our system and the Process chains are also scheduled for the same for more than a year now. What we are missing is the exact real time plan with the steps to be done to have this?
It would be of great help if we have this.
Regards,
Suman Pitta

Portal context menu is inactive

Hi all,
I am in process of creating a BI system on Portal, but the context menu on Portal Content folder does not display correct portal options, instead it's displaying IE conext menu.
I am logged on with J2EE_ADMIN with SAP_J2EE_ADMIN role.
Thanks.

Hi,
Could you please help me too. I am also getting the same problem even though host is fully qualified name like aaa.bbb.ccc.net:50000/.. and referring to KM folders. Its not displaying the xml forms after pressing the hyperlink available under the km folder.
Line : 1
Char: 1
Error: Object expected
Code:0
URL: http://aaa.bb.cc.net:50000/...
Thank you for all your support
Best Regards
Jeb

Context Menu in BW Report Iview not opening after upgrade to Portal 7.3

Hi All,
We have a unusual problem that, the Context menu of the BW reports for options like filtering is not opening post Upgrade to Portal 7.3 for End users.
However, with Super Admin role, the Context menu opens for the BW report Iview.
I have tried giving the same permission that the Super Admin Role has on the BW Report Iview to the End users, still no success.
Any idea? Anybody faced same kind of problem?
Please revert for any more info.
BR,
Uday

Hi Uday,
This is really a shot in the dark since I have not done much with 7.3. Have you checked for UME actions that are assigned to the administrator but not the end user?
Best regards,
Duncan

Portal context menu change translation

Hello,
I want to change some portal context menu (when executing wad template) text in french. The translation is not very good some times.
I think it is possible to change it in a par file. But I don't how to find the par file to change.
Is it possible to do that ? And what the name of the par file to modify ?
Thank's

Hi Thierry,
I am really not sure which PAR file would solve your problem.
But you will have the required PAR files in your Portal in the below navigation,
Go to System administration -> Then Support Tab -> Portal Runtime -> Browse Deployment ->
Follow the Path ROOT/WEB-INF/deployment/temp
OR ROOT/WEB-INF/deployment/pcd .
Good Luck!!!
Biroj Patro.
Edited by: Biroj Patro on Aug 23, 2010 10:07 AM

Portal Catalog, right click, context menu not working

Hi,
1) I downloaded SAPNetweaver 2004s form sap download page and installeld and ran the Portal.
2) Accessed it thus: http://localhost:50000/irj/portal using Administrator userid/passwd
3) In "Browse portal catalog" I am trying to right click...it doesnt show the context menu ...just the browser's right click menu shows up
4) I do have a javascript error all along(which I suspect is preventing something)
5) Using IE7
6) Also I see all these talk of installing PDK etc...am I missing that ? Do I need to install anything if I got he 2004s netweaver or is it included?
I have spent a few days reading posts and portal admin and documentation guides with no help

Hello Monica,
I too have this problem with IE7 on WinXP Home version. But every thing works fine with IE6 as well as Firefox. So this is somthing to do with IE7, I would recommand uninstalling IE7 and use IE6.
See the for supported browsers:<a href="https://websmp205.sap-ag.de/~form/handler?_APP=00200682500000001303&_EVENT=RELEASE&00200682500000002804=01200615320900001250&00200682500000003818=WBRPFM&00200682500000003853=Enterprise%20Portal">2004s Supported Browsers</a>
INTERNET EXPLORER 5.5 WINDOWS SERVER 2000/IA32 32BIT Not Released 24.10.2005
INTERNET EXPLORER 6.0 WIN XP 2002 PROF. 32-BIT Released 24.10.2005
INTERNET EXPLORER 6.0 WINDOWS SERVER 2000/IA32 32BIT Released 24.10.2005
INTERNET EXPLORER 6.0 WINDOWS SERVER 2003/IA32 32BIT Released 24.10.2005
<b>So it is clear that IE7 is not supported</b>.
Greetings,
Praveen Gudapati
p.s Points are always welcome for helpful answers
Message was edited by:
        Praveen Gudapati

BI Administrator Cockpit - Portal Runtime error

Hi all
I have deployed the BI Administrator Cockpit Package on Portal. I am getting the BI Administrator role and have assigned it to an administrator user. I am also getting the all iviews related to the cockpit but all with Portal runtime error -even the system selection iview is giving same error:
com.sapportals.portal.runtime.PortalRuntimeException:Exception in SAP Application Integrator occured:Unable to parse template.
and also
Authorization check for caller assignment to J2EE security role.
Luking for valueable help.
Regards
Shilpa
Edited by: Shilpa Bhanot on Apr 29, 2008 6:21 AM

If you are not able to see only BI admin cockpit. you need to do this.
In Portal, assigned role tab, BI adminstratro role should be included.
If you are not able to do anything in portal, Basis config for portal is not yet done

Dynamic Bea Portal: Drag&Drop, Ajax, Context Menu, etc...

Hi all,
Here's a buzzy discussion for all enterprise portal geeks:
I am currently implementing a portal on WLP.
On the other hand, I'm also building a proprietary framework to host several applications for a large institution.
For the latter, we are using Ajax and solid Javascript development to create a desktop-like visual environment (with reusable components, drag and drop between applications, context menus, dynamic windows, reusable views: list, detail, etc).
Given the functional contrast (between the portal and the rich application), I am becoming terribly frustrated by the inflexibility of the portal/portlet paradigm, and the innability to incorporate most of these concepts without hacking the specification... it's evident to me that the jsr168, as implemented now, has sacrificed too much in favor of too little (WSRP and portability) and carries with limitations imposed by arguably "obsolete" problems such as client statelessness or the innability to refresh the browser on a per portlet basis.
One might argue that the latter comes from a commitment to the "no javascript" development philosophy. But, doesn't Weblogic console, Portal admin and even the sample portal use javascript for non-trivial tasks??
OK, so we can use javascript... :-)
mmh, in that case, here are some obvious enhancements that come to my mind which still could be applied without violating the specification:
- Drag and drop of portlets within a page
- Lifecycle and State management occuring asynchronously over the wire, for each portlet independently
- Dynamic invocation of a given portlet with a javascript Api (on demand)
- Context menu (or similar) used to invoke a relevant portlet (by allowing registration, just like in a shell)
I am being <b>very</b> conservative here... and yet these features alone would create a dramatically more dynamic user experience without pushing the spec. Plus, we would be able to create lighter portal applications (smaller activation tree and the whole page reload overhead).
Of course portlet state and inter-portlet communication should (or could) then be passed to the visual interface. But, hey, isn't that where it should be? If you think about it, no portlet should allow potentially insecure operations to occurr unchecked, and for this matter, the consumer server environment is as dangerous as the user client environment (if you hold true to the producer-consumer-user paradigm).
Now, talking about interoperable portlets... how standarized is inter portlet communication anyway?
And what about mobile and js-disabled souls!!? well, I believe fallback is the word for them.
Anyway, all this issues should be resolved by the portal container, that's what we are paying for ;)!
how?... easy: clever, solid javascript and a smart fallback strategy.
If you feel I'm talking on air here, here's some pretty solid air:
http://projects.backbase.com/RUI/portal.html
http://www.google.com/ig
I am currently experimenting on this issues, but I'm already having conceptual problems with the personalization service and others... (of course, it's all thought for something else).
Any ideas more than welcome.
BEA, what do you have in mind?
Regards,
Aldo

Hello Armin,
Do we have this feature available in Java Webdynpro now?
Best Regards,
Roby..

BI Administrator cockpit queries not shown in portal

Hi All,
We have a same problem as mentioned in thread BI Administration Cockpit - Queries not shown in portal but i didn't understand the solution.can somebody tell me the solution
Thanks
Bala Duvvuri

Note 972514 resolved the issue
Thanks
Bala Duvvuri

BI Administrator Cockpit within SAP Portal: no data will be shown

Hi!
I have installed the BI Administrator on my Portal and configured the settings for SAP BW system.
The activation cockpit on SAP BW runs with some errors.
Unfortunately when I logging on Portal all the content of my SAP BW system under BI Administrator is empty.
How can I trace the error?
Thank you very much!
regards

HI
You can call the BI Administration Cockpit from the BI Administration 1.0 business package in SAP Enterprise Portal
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/90080703-4331-2a10-cd98-9c1e95acdea0
https://www.sdn.sap.com/irj/sdn/howtoguides
https://www.sdn.sap.com/irj/sdn/event/webinars?rid=/library/uuid/d09864c5-0bb0-2910-8e8a-a306a886dcd9
http://help.sap.com/saphelp_nw04s/helpdata/en/48/bc406a800a4226951dcc57428e03f2/frameset.htm
BI ADMINISTRATION COCKPIT
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/50f95b21-7fb8-2910-0c81-f6935d4c654b
Also Check the Note 934848 - Collective note: (FAQ) BI Administration Cockpit
Hope it helps

Portal context menu incorrect position

Hi all,
Environment: BI 7.0, Portal 7.0
Context menu positions incorrectly in portal when I click right mouse button on elements of tables. Sometimes, on the top of page or far away from the table, rather than beside the elements of tables.
Could u tell me how to adjust context menu display position in portal management?
Thank you!!!

Hi,
The problem which you are facing might be because of the browser problem.Remove all your cache and temp files in browser and try using portal.
Regards,
Vinoth.M

No context menu within Web Application in Portal

Hello all,
our user runs Web Application via Portal. Normally they can call up the context menu within the web application in order to access the context menu. There they can drill down, swap characteristic, distribute, etc.
For some user we notice that this context menu is not appearing by right mouse click, but the context menu from the internet explorer. That means that these user can not navigate properly within the web application.
When the user executes the Web application via the Bex browser, the context menu appears properly. When I log on in into the portal/bex browser on the users PC, the context menu is also appearing properly.
Is there an user-specific portal setting, which is to maintained?
Any help would be great.
Best regards,
Stefan from Munich/Germany

Hi Stuart,
The easiest way to achieve the desired behavior is to make some changes to your web-j2ee-engine.xml file.
In the login module configuration element edit the security-policy-domain field to u201C/irju201D. This will provide you access to your application from the portal without re-authentication to be required.
See also http://help.sap.com/saphelp_nwce10/helpdata/en/3e/ee7aa1ab8b4442bab00ba3171cef72/content.htm
Regards,
Diyan

Context Menu not displayed in KM for users except Administrator

Hi Experts
Can you please suggest where the permission should be given in order to make context menu visible for users who are not super-administrators but are content admin?
We are facing issue with context menu not shown at all to the users.
Please suggest.
Regards
Shaily

Hi Shaily,
You may need to look into the permissions on your Layout set and Resource renderer in use.
This thread will help you navigate and do the required changes.
http://scn.sap.com/thread/99088
Thanks,
Biroj

Where is the standard context menu in IE?

Is the standard IE context menu (cut/copy/paste etc) completely disabled in CE? If I right click an inputfield I can only get usersettings (which I don't want, so they're disabled using administrator ctrl-right click).
After disabling user personalization I now get no menu at all if I right click an object. I can see that the event get caught by the portal.
I really want the standard context menu! Please help!
Regards
Carl

Yes, the browser menu has been replaced completely. You can use keyboard shortcuts for cut/copy/paste.
Armin

Request Membership is display in context menu aber this is not active!

Hello there,
I've created a Room(Restricted Room).(with the Administrator role)
I logged on as Enduser.
I can see all of the existing Rooms in Room directory.
I try to request membership to one of the rooms(all the existing Rooms are Restricted).
I see in contextmenu request membership, but this is not active!
Have someone please an idea, how can i solve this?
configuration issue???
Thanks in advance
best regards
Katayoun

Hi Robert,
Portal Version is NW04s and SPS 14.
And light Room Directory is active.
I've tested, with annd without Light Room Directory, Context menu displayed Request Membership but not active!
hope, Everyone hat an IDEA!
Thanks in advance
Katayoun

BI Administration Cockpit - Context menu in portal

Similar Messages

Maybe you are looking for