BI Administration tool cannot be started

I installed the BI 11g software on Windows XP - When trying to run the BI administration tool, it tries to open, then it closes immediately without givin any errors.

Hi,
What XP edition you are running? Do you have SP2 installed?
Installing Oracle Bi Administration Tool On A Windows7 Client [ID 1179563.1]
Try to start the same tool from the command prompt and see if you get any errors.
Thanks,
Hussein

Similar Messages

Missing administrative tools in the start up in windows 7

I have a touchsmart 310-1020 pc and I am have administrator issues, some time I cant save to my files , it asks for administrator permission and even when I am logged on as the administator. I went to the startup menu to aministration tools and it is missing from startup.... what do I need to do to get that back?

Hello ab78411:
Welcome to HP's forum. Go to control panel switch view by : ( to read ) Large Icons on top right. Now all icons will display. Locate Administrative Tools right click on icon select create a short cut. Close out window display your desk-top icons if they are turned off. Now left click mouse on Administrative Tools icon and hold down click while you drag it to start button Ounce it opens task menu continue to drag the icon up to the second space very top of menu. Release click hold. Now it is pinned to start up menu. I had you put it at top section so it will take longer to bumb off. You can move it to the very top by moving down the very top icon to below it. Using the same method as before. Please click on Kudos if this has resolved your issue. Thank you frrw.

BPC 7.1 Administration Client cannot be started

Hi All,
I am trying to start action "manage application sets" on administration client for BPC 7.0 Patch 7 but the client stay invisible.
the last thing that I can see is the client starts to download some files (step 1).
After this it gets invisible, all that I can find is the activ process OSoftAdminMain.exe.
I get no error, nothing.
Last thing that I tested is to execute BPC Client Diagnostic for Administration client features. There I got some errors:
[Files]
BPC Administration Folder:C:\Programme\BPC\
File: C:\Programme\BPC\Ev4AdminClient.dll
    Status:File not found
    Reinstall BPC Administration client.
File: C:\Programme\BPC\Ev4Logon.dll
    Status:File not found
    Reinstall BPC for Office client.
File: C:\Programme\BPC\Ev4Share.dll
    Status:File not found
    Reinstall BPC for Office client.
File: C:\Programme\BPC\Ev4AdminForLaunch.xla
    Status:File not found
    Reinstall BPC Administration client.
File: C:\Programme\BPC\Ev4Admin.xla
    Status:File not found
    Reinstall BPC Administration client.
File: C:\Programme\BPC\Ev4UpdateAdm.exe
    File Version:7.0.0.107
    Status:OK
File: C:\Programme\BPC\UnZip32.DLL
    Status:File not found
    Reinstall BPC Administration client.
File: C:\Programme\BPC\Ev4ResCltAdm.dll
    Status:File not found
The missed files I also cannot find on the application server.
That could be a problem?
Before installing of Patch 7 I could start all action on admin client.
Please help me on this.
Thank you,
Vadim

Hi,
no, unfortunately it does not work.
I reinstalled the BPC client, but it is the same.
The only exception: the client diagnostic tool shows no errors any more::
03.05.2010 10:33:22
Diagnostic forBPC Administration client features.
Your computer is ready to install BPC for Office client features.
[System Information]
Local System Name:XXXX
IP Address:10.1..**
Current User Name:xxxx
BPCServer Name (IP Address):sapbpc..:8081
Diagnostic Program Version:7.0.0.113
CPU:586
Total Physical Memory:2.097.152 KB
Available Physical Memory:2.097.152 KB
Total Virtual Memory:2.097.024 KB
Available Virtual Memory:1.875.448 KB
Free Disk space (C Drive):179.740 MB
Windows Directory:C:\WINDOWS\
Windows System Directory:C:\WINDOWS\system32\
Language
    System default language:English
    User default language:GERMAN
Prerequisite software
Microsoft Windows
    Windows Version:Windows XP
    Windows Build Number:2600
    Windows Service Pack:Service Pack 3
Internet Explorer Version
    Required:6.0 or higher
    Currently:8.0.6001.18702
    Status:OK
Microsoft Excel Version
    Required:Excel 2000(9.0) or higher
    Currently:Microsoft Excel 2005
    Status:OK
Microsoft XML Version
    Required:8.10.8308.0 or higher
    Currently:8.100.1051.0
    Status:OK
Microsoft .Net Framework Version
    Required:1.1.4322
    Status:OK
End of file
Regards,
Vadim

OBIEE - Administration tool doesn't start up

Where to start...
I go to Start >> All Programs >> OBI >> and select Administration, and I get the outer glass symbol for around 4 seconds and nothing happens.
I have these Services Running: Oracle BI Java Host, Oracle BI Presentation Server, and Oracle BI Server.
I have OC4J running as well.
This didn't work but since it did for everyone else on my team I initially figured that I installed it wrong. So I reinstalled it. The thing that makes this odd, is that after the installation, I attempted to open the tool and it worked. THIS WAS BEFORE I RESTARTED MY COMPUTER. I restarted my computer and it now goes back to the initial outer glass and then nothing.
Someone mentioned to clear my temporary internet files, and I have done so with nothing happening.
Please Help
Thanks
Chris B.

If nothing else works, try reinstalling your JDK

Administrative tools

How do you remove Administrative Tools on the start menu using Local Policy Manager server 2008 R2. I'm trying to setup a new RDS server. I want only domain admins to have access and all other users to not even see it?

I don't think there's a way to do it via Local Policy Manager, but since you're obviously on a domain you can do it via Group Policy. See Erwin's reply here
http://social.technet.microsoft.com/Forums/windowsserver/en-US/da4c9b7d-94b1-466a-88fc-857ce4cc596a/remove-administrative-tools-from-group-policy-server-2008-r2-foundation?forum=winserverGP for the exact steps you need to take in the GPMC to create the
policy. I haven't had a chance to test his steps, but it looks right to me from the last time I did something very similar.

I can't use home sharing because it says Bonjour is not enabled. So I went to administrative tools and started it. Restarted my computer and home sharing still isn't working

I can't use home sharing because it says Bonjour is not enabled. So I went to administrative tools and started it. Restarted my computer and home sharing still isn't working

I have also tried repairing Bonjour in adminstrative tools and still a no go! Frustrated!!! Looking for another idea

Oracle BI EE Administration Tool Not starting up

Hi All,
I have installed BI EE on windows xp and when I tried to start the Administration tool nothing happens. Can anyone assist please.
Regards
Remeez

Hi,
Probably I found a workaround to this problem: runas command. This gives a possibility to start admintool using an other user. You can find runas command syntax here http://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/runas.mspx?mfr=true.
In my case, I changed Administration shortcut Target (Start -> Oracle Business Intelligence -> Administration and right click properties) to this: C:\WINDOWS\system32\runas.exe /user:RISTOS-XP\administrator C:\OracleBI\server\Bin\AdminTool.exe
I first tried this (thanks to my old gollege in Oracle Finland) as right click admintool.exe and selecting " Run as" and then "The following user:" and Administrator of my computer. I'm not sure, why I have this starting problem, maybe because I have to use Domain\UserId login. My domain login belongs to the local administrators group, but for some reason in this case it is not enough ..
- Risto
Message was edited by:
risto.soikkeli

Cannot view data on physical layer on Oracle BI administration tool

Hi everyone
I have a schema1 and table1, table2, table3.
I have connect in odbc using the schema username and password and it was successful.
I can view the data using toad and sql oracle developer with schema username and password.
I also import the tables in Oracle BI administration tool with my schema username and password.
But my problem is i cannot view the data on the table in physical layer using my schema username and password.
Please help,
Thanks in advance
Edited by: hanson on Sep 16, 2009 7:15 AM

Hi,
I'm confused about the last bit, you did a database import to get the tables into the RPD, which worked, but now they are not showing in the phsyical layer of the rpd? They should be there under a database with the name of the ODBC/OCI that you used when you imported them.
If they are not there then this would make me think that the import of the tables has not worked, try importing just one and see what happens.
Regards,
Matt

Application cannot be started for WebDynpro Content Administrator

<b></b>
Hello Dear Friends,
It's very Urgebt for me Plz....,
We are on EP6.0 SP14 and implementing ESS using WebDynpro for this we uploaded patch ESS & XSS Components
firsttime in EP6.0 SP9 after we upgraded to SP14 here we faced some problems and undeployed the deployed components ESS&XSS the undeployment is sucessfully done after we are trying to logon into WebDynpro Content Administrator its giving the following Error Messgage.
<b>
SAP J2EE Engine/6.40
503 Service Unavailable
Application cannot be started.
Details:
com.sap.engine.services.deploy.container.ExceptionInfo: Container metamodelrepository is not active at the moment and it is not possible to startApp sap.com/com.sap.security.core.admin.</b>
Could u plz help me on this issue..,
Thanks in advance and waiting for reply...........
Sreedhar G

Hi,
check the status of J2EE engine.
Check if it works after restarting J2EE engine.
Regards,
Ashutosh

Cannot install itunes, it says it cannot access administrative tools file

I had itunes installed on an external hard drive, but I want to switch it over to my computer. When I try to run the install file I get the following error: Could not access network location Administrative Tools\.

I'm having the same problem. I've tried everything I can think of. I tried manually uninstalling QuickTime, but it wouldn't let me, something about it couldn't find a .mis file. So, I deleted all the QuickTime files/folders I could find, went through the registry deleting all QuickTime references (no small task, there's multiples of many) and tried again. It still didn't work. I then uninstalled my old version of iTunes and took another trip through the registry. Still nothing says it can't uninstall the old QuickTime, even though, as far as I can tell, there's no longer any QuickTime to uninstall! SOMEBODY HELP!!

Cannot connect online from administration tool to repository

Hi everyone,
I am still a beginner with BI so there may be a misunderstanding.
I installed the BI developer client tools on a different host than the BI server.
I tried to work through the BI tutorial, creating a repository file on the client host and uploading it to the server.
Now I want to connect online to it, but in the dialog of the administration tool, the button for actually opening the repository is greyed out. I can provide the repository name, user and password, but nothing.
The documentation says I should select the ODBC system DSN for connecting to the repository, but the dialog does not offer me one.
I created an ODBC system DSN to the BI server upon installation of the client tools, and the test works fine.
I did create it using the ODBC driver of an Oracle client installation. The BI client tools themselves do not seem to install its own ODBC driver.
Why is this system DSN not provided in the administration tool dialog?
Where am I failing?
(everything, BI client tools, BI server, Oracle ODBC driver is 11g)
Best regards,
Jörg

Ok, solution found.
The error, as always, was sitting in front of the screen.
First, working with Window-7-64, I did not realize there are two different ODBC administration panels. The one in the control panel open with the 64bit-ODBC drivers, the one used by the BI client tools is called in C:\Windows\SysWOW64
Second, I did not configure the DSN correctly. I always wondered how it would now on which host the BI server resides and overlooked the server text field several times. (Luckily I will receive a new pair of glasses next week).
Now it is working fine.
Best regards,
Jörg

Nothing will work in my Vista 64bit! "The service cannot be started, either because..."

Hello,my windows Vista will not run anything, no antivirus', no system restore no administrative tools. I'm getting the message,"The service cannot be started, either because it is disabled or because it has no enabled devices associated with it."... No system recovery at boot-up, I press F11 at boot up and the only service that won't start at boot up is system recovery. Any programs that I try to run that will have interact with windows system status keeps showing the same message, "The service cannot be started, either because it is disabled or because it has no enabled devices associated with it." Thanks in advance for anybody who has a solution to this.

On a Microsoft Web site I found the following information. It says it is for Win 7, but it might help you trouble shoot and maybe find out what is going on in your Windows Vista.
Good luck, GeorgeFN
http://answers.microsoft.com/en-us/windows/forum/windows_7-security/the-service-cannot-be-started-ei...
GeorgeFN
I work on behalf of HP.

WLCS 3.1 Administration Tool

Nope, we're not using cloudscape, we're on Oracle. And, we have tried
recreating the WLCS tables.
Craig
"Peter Wu" <[email protected]> wrote in message
news:39db48eb$[email protected]..
If you were using cloudscape that came with the software .. make sure that
it didn't get corrupted in trying to get the commerce server to work.That
happened to me and I couldn't log in so I shutdown the commerce server,
copied the files over from the db/data/commercebackup directory into the
db/data/commerce directory and started the commerce server back up.
Peter
"Craig Cobb" <[email protected]> wrote in message
news:39db41d5$[email protected]..
I'm am having a problem login into the administration tool as well. The
administrator user works if I use the default RDBMS realm for security,but
when I try to switch to the ldap realm for security, it doesn't work.
When using the ldap realm, I get the following message when I try to
login
with administrator/password:
Invalid credentials - User unknown
If I create a user named "administrator" on our ldap server and try tologin
in again, the error message changes to:
Supplied credentials don't grant adequate privileges
Anyone out there found a way to use ldap with WLCS 3.1?
Thanks,
Craig
"David Udin" <[email protected]> wrote in message
news:[email protected]..
login name: administrator
password: password
Mike Geier wrote:
I just installed WLCS 3.1 and I can run the examples, but when I try
to
get
to the Administration tool, I cannot get in. When the window opensasking
for network id and password, the realm is null. I tried system andweblogic
which is what the weblogic properties file has as the system id and
password, but it doesn't work. Why is the realm null?
Thanks in advance,
Mike

PCMCIA Wlan card is not detected: Error 1058: service cannot be started

PLEASE HELP!
I am running WXP Pro for over 2 years and I have been connecting to the internet via a wireless pc card in my laptops PCMCIA slot with no problems. Suddenly last week it started to randomly disconnect and reconnect, and now it has gone off completely.
I bought a new WiFi card and still didn't work. I have checked the device manager and the PCMCIA cardbus driver is working fine as is every other device. The wireless card driver and some other network related drivers fail to start no matter what I try and how many times I try. I have tried another laptop and both my old card and the new one work fine.
All the device driver that I try to start have the error
"Error 1058: The service cannot be started, either because it is disabled or because it has no enabled devices associated with it."
The card driver is installed, just not starting, it's like the laptop cannot detect or see the card in the slot
Please help; I am having trouble finding anyone with the same problem after a week of searching the web.

Hi
This behavior can occur if the service is disabled or if the service is disabled for the hardware profile that you are currently using.
To enable the service do this:
1. Click Start, point to Programs, point to Administrative Tools, and then click Services.
2. Double-click the service that did not start.
3. Click the Log On tab.
4. Verify that the service has not been disabled for the hardware profile that you are using. If it has, click Enable.
5. Click the General tab. Verify that the service has not been disabled in the Startup Type box. If it has, click Automatic to have it start when you start the computer.
This was described here in the MS knowledge base article
http://support.microsoft.com/kb/241584

Remote desktop administrator software failed to start

I just upgraded to the new ARD client and now I cannot start Remote Desktop Administrator. It says "The Remote Desktop Administrator software failed to start due to an unexpected error. The remote desktop software may not be installed correctly or the computer may require a restart."
Again, this happened after I install the ARD client update just released by Apple on my MBP 10.5.8.
I need to get ARD Administrator back up and running. How?

This is the most feedback I've ever gotten to any post.
After much trial and error here is the solution I came up with:
1. follow the instructions in the following link. Most importantly, make sure you follow the instructions on removing the 10.2 clients. I know that's not what we're dealing with here but it is necessary:
http://support.apple.com/kb/HT2577?viewlocale=en_US
2. Put the remote desktop Admin app in the trash and empty the trash.
3. Download and install the ARD 3.2.2 client via the following link:
http://www.apple.com/downloads/macosx/apple/application_updates/appleremotedeskt op322client.html
4. Reinstall the remote desktop administrative software in the Applications directory. (Actually, what I did was zip the ARD admin app, then trashed the non-zipped app and emptied the trash, then unzipped my zipped ARD Admin app and made sure the app was in the Applications directory. Didn't need to mess with the CD this way.)
5. Download and install the ARD Admin 3.3 update. It should now recognize that ARD Admin is installed on the computer and update it.
6. Try to launch the Admin app. It should work now.
I believe these are all the steps. After this I ran software update and it said I had no software to update. It looks as though the ARD Admin updater also updates the client software.

BI Administration tool cannot be started

Similar Messages

Maybe you are looking for