BI Administrator for several SAP BI systems within SAP Portal

Hi!
I have activated BI Administrator function in SAP BI system and in SAP Solution Manager system as well.
I have connected both systems to SAP Portal as SAP_BW systems.
Per default I can see in SAP EP --> BI Administrator only the SAP BI system entry.
I have the following problem:
When I assign system alias "SAP_BW" in Portal for one of the systems I can see this system in drop down list on BI Administrator. BUT I can assign this system alias only for one system.
Is there a work around to solve my problem?
How can I see the SAP Solution Manager systen in drop down list within SAP EP --> BI Administrator?
Thank you very much!
regards
Jürgen

HI
You can call the BI Administration Cockpit from the BI Administration 1.0 business package in SAP Enterprise Portal
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/90080703-4331-2a10-cd98-9c1e95acdea0
https://www.sdn.sap.com/irj/sdn/howtoguides
https://www.sdn.sap.com/irj/sdn/event/webinars?rid=/library/uuid/d09864c5-0bb0-2910-8e8a-a306a886dcd9
http://help.sap.com/saphelp_nw04s/helpdata/en/48/bc406a800a4226951dcc57428e03f2/frameset.htm
BI ADMINISTRATION COCKPIT
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/50f95b21-7fb8-2910-0c81-f6935d4c654b
Also Check the Note 934848 - Collective note: (FAQ) BI Administration Cockpit
Hope it helps

Similar Messages

Connectivity between SAP ECC system and SAP BI

Connectivity between SAP ECC system and SAP BI
Hi BI-experts!
I would like to load e.g. transaction data from SAP ECC system into SAP BI system.
The Loading process is hanging in processing step u201CSERVICE APIu201D.
The process in hanging in status "yellow" and then changed after a while to status u201Credu201D.
[0FI_AR_4 |http://www.file-upload.net/view-1447743/0FI_AR_4.jpg.html ]
The following steps within Load process are yellow and then red:
Extraction (messages): Missing messages
Missing message: Request received
Missing message: Number of sent records
Missing message: Selection completed
Transfer (IDocs and TRFC): Missing messages or warnings
Request IDoc : Application document posted (is green)
Data Package 1 : arrived in BW ; Processing : 2nd processing step not yet finished
Info IDoc 1 : sent, not arrived ; Data passed to port OK
Info IDoc 2 : sent, not arrived ; Data passed to port OK
Info IDoc 3 : sent, not arrived ; Data passed to port OK
Info IDoc 4 : sent, not arrived ; Data passed to port OK
Subseq. processing (messages) : Missing messages
Missing message: Subseq. processing completed
DataStore Activation (Change Log) : not yet activated
Question:
Can some one tell me whether my distribution model or other settings are wrong?
I created 2 distribution model (BD64), one from SAP BW system and other from SAP BI system with message types RSRQST, RSINFO, RSSEND
Thank you very much!

Hi Holger.
this issue is related to the RFC but not the one which is communicating from BI to R/3 rather the one which is communicating from R/3 to BI follow these steps.
1. check your BI system logical name from the myself source system.
2. go the ECC and run the transaction sm59
3. go the ABAP Connection folder and search for your RFC which name would be by default as per your BI logical system name.
4. double click it and edit it now check whether the Target hostname or ip is OK.
5. In the logon tab check the client number User and password settings.
Save it and test it with both Connection Test and Remote Logon.
if every thing work fine i hope your problem will be solved.
kind regards,
Zeeshan

How to Reconcile Data Between SAP Source Systems and SAP NetWeaver BI

Hi,
I just read "How to Reconcile Data Between SAP Source Systems and SAP NetWeaver BI". While I'm waiting for more authorisation to r/3 to carry it out and test this functionality.
I'd like to ask a question to anyone who has implemented this type solution. On page 10 it talks about creating a view then setting up the datasource. The solution talks about runnig a query. I suspect when we run a query I would run it for only a period(using variable) to reconcile.
My question is this. Will the datasource extractor on /r3 only select the period in our variable or will it do a full selection of the data which would then be passed to BW for filtering?
Regards

DEar Mark,
There are several avenues where you can see and reconcile your data with source system, u can see data in by tcode RSA3 for a datasource, and compare the values with actual document posted into the R/3 system. Respective fuctional consultant canhelp you a lot to confirm the data.
On BW side u can see the data in PSA and then check tranformations which subsequent change/update/reject data records based on the selective conditions.
hope this helps.
Kindly assign the points if it works.
Revert back if u need futher help/information.

Integrating SAP-ERP system to SAP-SCM system via SAP-XI

Hi All,
My requirement is to make a scenario for Integrating SAP-ERP system to SAP-SCM system via SAP-XI,Sender side is IDOC Adapter and Receiver side is Proxy.As iam not aware of the scenario procedure can any body could explain briefly step-by-step on this.
Thanks in Advance.
ram

Hi,
Sender is IDOC so no need to take any communication channel & sender agreement in ID window.
Find below link of more information on IDOC configuration
Introduction to IDoc-XI-File scenario and complete walk through for starters.
Troubleshooting File-to-IDOC Scenario in XI.
Convert any flat file to any Idoc-Java Mapping
IDOCs (Multiple Types) Collection in BPM
Outbound Idoc's - Work around using "Party"?
Troubleshooting File-to-IDOC Scenario in XI.
Proxy Configuration
File to R/3 via ABAP Proxy

Connecting SAP PLM system to iview portal.

Hi experts i want one clarification on process of connecting SAP PLM system to iview portal.
here my scenario is SAP PLM->>>XI--->>>WEBSERVICES
RFC-->>XI--->>>>SOAP
1---->>here i have to get the list of all materials from SAP PLM using iview as
front end tool.
2---->>and the next thing is if the material is camera means it should require the
lengs software for the camera.In the iview we can select the material
for upgrated software.
3--->>after that the input parameters wil be sent to webservices
(some website) using XI part(mapping and all) and the response should come back then it has
to be stored in the SAP PLM system.
please clear me all the above questions.
thanks & regards
babu

HI,
See
1) Request is sent from the Portal.
2) Web Dynpro application is called through the URL.
3) Web Dynpro app makes use of Web Service based Model in sending SOAP request to XI.
4) SOAP adapter converts the incoming SOAP message into XI Message.
5) Synchronous call is made from XI to R3 backend using RFC adapter.
6) Response is mapped and routed back as SOAP message.
Necessary design steps in interface objects, mapping objects and Business process are created according to the functional requirements.
Sender Soap Communication channel is setup in Configuration along with other essential configuration steps.
WSDL is generated for the message interface in Integration Directory using Tools-->Define Web service.
Override the default URL with following while generating WSDL.
See the below link
https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/1334 [original link is broken] [original link is broken] [original link is broken] [original link is broken]
Regards
Chilla

SAP Erec System Integration with Portal

We have installed a new erec system in Sap nw 7.02 abap system which has to be integrated with Existing portal system. There is another existing HR system(ecc6.0 ehp ) which is already connected to portal. What are the steps to be followed for Integrating Erec system with portal.
Thanks.

Dear Colleagues,
We have similar situation and this week we hopefully will approach to integrate ERECRUIT with SAP Portal. We have recommendations from consultants but since ERECRUIT implementation is still no commodity’s I’d like to confront this recommendations and share experiences. Please have a look on the the thread about it:
ERECRUIT 606 integration with SAP Portal 7.31 - what to take in mind?
Cheers
Waldek

Can we send .csv file from sap srm system to sap pi?

Hi Experts,
we have 3 options send the data from sap systems to sap pi.i. e.proxy,idoc and rfc only
How can we send .csv file from sap srm to sap pi?
Regards,
Anjan

Anjan
As you know SAP SRM and SAP PI are different boxes.
*_Option 1:_*
we need a shared AL11 directory in between SAP SRM and SAP PI (Ask basis to setup shared folder). Place / Populate the file in the folder from SAP SRM and then it can be picked through sender file communication channel.
In this case you (Basis team) will share one folder which is visible from the AL11 transaction of both the systems (SRM and PI). You will drop .csv file using some report or program from SRM at this location and from PI you can read that file using File communication channel (NFS mode).
Option 2:
Setup a FTP at SRM environment and expose some folder which can be accessible from PI. Use sender file communication channel at PI end to pick the file.
You can use this option incase sharing of folder is not possible (due to network / other constrains). Here FTP server is required to expose any folder as FTP so as it can be accessible from internet (remote location). You need to expose some folder at SRM machine. You will drop .csv file using some report or program from SRM at this location. Now PI can fetch the file from that location using sender file communication channel (FTP Mode) providing user credentials.
Hope it clears now.
Regards
Raj

Delegating administration for several primary sites

Hi everybody again!
Could you tell me, can one primary site admin help out in managing clients to other primary site admin. I've noticed that altought i granted him access to that site collection he could see only it's count not members....

I understand that deployment will bring up to all of these collections members.....but i won't see them in collections, it will not be able to use remote tools, resource explorer and etc....How should we work with other site collection members till we can't
see them?)))) I thought that RBA model makes users to work (i mean visibility of that computer resources) with any resources in hierarchy not in primary site only...
Torsten, you've made discuss about that here:
http://social.technet.microsoft.com/Forums/en-US/49894f4a-ccb4-462b-b58a-6718889c73fb/need-clarification-about-collection-resources-in-sccm-2012-compared-to-2007?forum=configmanagerapps

Sap test system needed / sap test system gebraucht

Hi,
maybe somebody of you could give some hint where I can find a test system for sap in a downloadable version 4.5 upwards. I have an sap mini basis system (mbs) in the version 4.6 (c) , but no valid license key on hand due to the fact that the old one has expired and there would not be any new license key available from sap company itself because of already having done the steps up to the latest version.
If somebody could also advise where to find sap test versions in between 4.5/4.6 and the latest it would fantastic to get to know - I need an test environment for abap programming in the first place.
Thanks in advance to you...!
Best regards and wishes !!!
Hallo,
vielleicht gibt es jemand, der mir sagen kann wie oder wo ich ein Testsystem für die ABAP-Entwicklung bekommen kann.
Ich habe für Windows bereits ein MiniSAP-System in der Version 4.6 (c), bei der der Lizenzkey aber nicht mehr funktioniert, da abgelaufen.
Falls mir jemand einen Lizenzkey für diese Version zur Verfügung stellen kann, wäre mir vorerst sehr damit geholfen.
Aber nichtsdestotrotz würde mich eine neuere Test-Version von SAP sehr interessieren. Falls mir jemand hiervon eine Kopie geben kann oder einen Hinweis darüber wo gebührenfrei oder kostengünstig eine solche zur Verfügung steht oder gestellt wird, wäre ich sehr froh darüber, da sich sicherlich seit 4.6 schon ein wenig geändert haben wird, in Menüs u.a. .
Danke im Voraus für eine Antwort auf meine Frage!!
Viele Grüße!!

Hi again,
during installation the java installation folder needs to be selected. After having chosen this the installation aborts by showing a message with the options retry, view log, stop.
This message is generated:
An error occurred while processing option SAP NetWeaver 7.0 SR1 including Enhancement Package 1 > SAP Application Server ABAP > MaxDB > Central System > Central System( Last error reported by the step :The subkey 'HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\AntiVirSchedulerService' does not exist on the 'localhost' host.). You can now:
Choose Retry to repeat the current step.
Choose View Log to get more information about the error.
Stop the option and continue with it later.
Log files are written to C:\Programme/sapinst_instdir/NW701/AS-ABAP/ADA/CENTRAL/.
Also some message about my anti-virus software came up saying that there is a problem with with localhost. I have now deinstalled all java from my computer to plainly install the version needed: version jre 1.4.2.x, but I can't find this version in the internet, I mean not in the way that it is obviously the right version. Some description says j2se and other more even though I was googleing for jre 1.4.2 download.
Is there anybody who can advise?
Thanks for any hint.
Best regards
Guido
Edited by: Guido Messer on Aug 5, 2009 3:31 PM

SAP Backend systems and SAP OPI Integration

Dear Experts
I have been reading many articles and blogs on Operational Process Intelligence but have couple of doubts regarding capturing events
from different backend systems
1. There is a Business workflow in ERP which we needs to be imported in SAP OPI. In one of the guides its mentioned that
"The ERP system needs to have the software component
SAP_BS_FND satisfying the below mentioned support package levels for various releases. ● 731: support package level 5 ● 730: support package level 4 ● 702: support package level 10 ● 701: support package level 12".
If a customer is not on SAP Business Suite and its only ERP installation then does this mean that we cannot import Business workflows in SAP OPI?
2. In lot of blogs its mentioned to use Process Observer in backend systems but what if client has not activated or using Process Observer in their landscape. What would be our options here to capture events ?
3. In SRM system we typically use Process Controlled workflows. Can these be imported directly in SAP OPI business scenario. Again assume there is no Process Observer here. Has anybody tried this?
Would be really great if I get clarity on these items
Regards
Rahul

Hello
Do you need to connect SAP R/3 users to ADS?
for that just follow SPRO setting of LDAP and customize your SAP system to access LDAP.
If you need to define HPUX users using ADS, It will require you the define login stack for HPUX.
Erez

GB e-filing using SAP XI system with SAP 4.6c

Hello Experts,
Could anyone please let me know SAP R/3 4.6c version supports e-filing using SAP XI as middleware.
If possible, please give me the compatability list or the link where I can get it.
Thanks in advance,
Purandhar P

I think this is what you need:
http://service.sap.com/~form/sapnet?_SHORTKEY=00200797470000081749&
Specifically: https://websmp102.sap-ag.de/~sapdownload/011000358700001171922007E/SAP_Efiling_46C_and_above.zip
and https://websmp102.sap-ag.de/~sapdownload/011000358700001114552007E/GenericXISetupguide.pdf
https://websmp102.sap-ag.de/~sapdownload/011000358700005987882006E/User_Guide_e-Filing.pdf

Set up for Extraction the data from SAP ECC system

Hi!
I would like to analyze the transaction and master data from SAP ECC system into SAP BI system.
I have created the connection (entry for SAP ECC system) within SAP NetWeaver System.
Unfortunately when I try to load the transaction data for Info source the process does not end successfully.
There are no information within SM58 on source system.
The ST22 does not contain some suitable information.
Question:
Which settings do I miss and how can solve my problem?
(user authorization, etc.)
Thank you very much!
regards
Holger

Hi!
many thanks for your reply.
The error I get:
Errors while sending packages from OLTP to BI
Diagnosis
No IDocs could be sent to BI using RFC.
System Response
There are IDocs in the source system ALE outbox that did not arrive in the ALE inbox of BI.
Further analysis:
Check the TRFC log.
You can access this log using the wizard or the menu path "Environment -> Transact. RFC -> In source system".
Error handling:
If the TRFC is incorrect, check whether the source system is fully connected to BI. In particular, check the authorizations of the background user in the source
Can you please help me to identify the error?
Thank you!

Make Business systems visible within SAP PI Tools

Hi!
I defined technical system and business system as well within SLD. Now I would like to see this business system within SAP PI tools (such as Integration Builder).
Question:
Which actions are requiered after the definition the technical and business system in order to work with these systems in SAP PI tools?
Is thers some documents describing this issue?
Thank you!

Hi,
The order for without party is simple, just import it, then
1. Create configuration scenario
2. Assign this system to your scenario
3. Create communication channels
4. Create Sender Agreement, Receiver Determination, Interface Determination, Receiver Agreement
And for with party.
1. Create Party in Integration Directory
2. Assign business system to this party
Now when you create your scenario
1. Create configuration scenario
2. Assign this party and system to your scenario
3. Create communication channels
4. Create Sender Agreement, Receiver Determination, Interface Determination, Receiver Agreement
>>- Creation of Party
First
>>- Creation of Business component
Second
>>- Creation of Scenario
Third
>>- Assign Business system
Fourth
Hope now it is clarified.
Regards
Suraj
Edited by: S.R.Suraj on Oct 1, 2009 4:33 AM

Loading of transaction data from SAP ECC system failed

Hi!
I successfully connected SAP ECC system to SAP BI system.
The following steps have been executed:
- user ALEREMOTE with max. authorization
- RFC destination
- Distributing Data model
- Generated Partner profile
- Maintaining message types in WE20
Now when I try to load any data from SAP ECC system the loading process in hanging in status "yellow" and never comletes.
[0FI_AR_4|http://www.file-upload.net/view-1447743/0FI_AR_4.jpg.html]
The following steps within Load process are yellow:
Extraction (messages): Missing messages
Missing message: Request received
Missing message: Number of sent records
Missing message: Selection completed
Transfer (IDocs and TRFC): Missing messages or warnings
Request IDoc : Application document posted (is green)
Data Package 1 : arrived in BW ; Processing : 2nd processing step not yet finished
Info IDoc 1 : sent, not arrived ; Data passed to port OK
Info IDoc 2 : sent, not arrived ; Data passed to port OK
Info IDoc 3 : sent, not arrived ; Data passed to port OK
Info IDoc 4 : sent, not arrived ; Data passed to port OK
Subseq. processing (messages) : Missing messages
Missing message: Subseq. processing completed
DataStore Activation (Change Log) : not yet activated
Question:
Can some one give me some technical steps (tcode, report) to solve this problem?
Thank you very much!
Holger

Hi!
Many thanks for your answer.
Via BD87 on BW system I detect that all the IDOC's (type: RSRQST) will be received from SAP ECC system.
Via tcode SM58 I could not detect any entries.
However the loading status from yesterday is set to "red".
The errors are:
Extraction (messages): Missing messages
Data Package 1 : arrived in BW ; Processing : 2nd processing step not yet finished
Info IDoc 1 : sent, not arrived ; Data passed to port OK
Info IDoc 2 : sent, not arrived ; Data passed to port OK
Can you investigate my issue again?
Thank you very much!

Feasibility for a new production system in the same environment

Dear friends,
Our management has come up with a requirement of expansion of SAP environment to cover up users in a different country for their francise over there. The options we are considering are below:
1. Implementing a whole new setup ( ECC, EP,BI, PI,Trex).
2. Expanding the lease lines between the sites in both the countries and providing access to the present setup itself with enhancement in the current hardware configuration.
or is it a good practice to keep a new Production system in the other country and add a new delivery route for the new production system within the current transport route ? How the license part may be taken care in these cases ?
Your suggestions are welcomed.
Many thanks,
SUJIT

Hi Sujit,
The answer to this question really depends on whether the new country is going to share much of the same configuration with some tailoring to local laws and requirements. If the system is going to be the same, then there is now reason to deploy a new system unless you are reaching technical limits for hardware. For ease of management and usage, then having one system is preferred. You can then upgrade your network to cope with the increased load and hardware as required.
Hope this helps,
Graham

BI Administrator for several SAP BI systems within SAP Portal

Similar Messages

Maybe you are looking for