BI cluster DOWN but the services and the admin server is all UP in OBIEE 11G.

Hi
Please suggest me some solution that if the BI cluster is DOWN and all the other components are all UP.Only the BI cluster and the Biserver_1 is DOWN under bicluster.so that the analytics is not working and showing in the Internet Explorer as "The Page Cannot be Displayed". But the EM and the Console are Working fine.

Some times it may happen because of the services if they are not started in order
./startNodeManager.sh
nohup ./startWeblogic.sh -Dweblogic.Management.username=username -Dweblogic.Management.password=password > AdminServerStart.log & tail -f AdminServerStart.log
nohup ./startManagedServer.sh bi_server1 -Dweblogic.Management.username=username -Dweblogic.Management.password=password>bi_serverstart.log & tail -f bi_serverstart.log
./opmnctl startall
Try this and let us know the out come.
Mark if helps,
Thanks,

Similar Messages

6.0 cluster startup without the admin server...

Is it possible to start a WL6.0 cluster without the admin server being up
          and running? If not, are there any workarounds that eliminate the admin
          server as a single point of failure?


          I have same questions.
          1.The admin server's primary task is up the cluster?And if admin server is down
          that can't affect the cluster running.
          2.Is it right when the cluster is working,the useful ip is admin server's ip?For
          example,admin 10.10.10.1,cluster1 10.10.10.2,cluster2 10.10.10.3,the only useful
          ip is 10.10.10.1 in the cluster.
          3.Is it correct that because the only useful ip is 10.10.10.1,therefor my client
          access the cluster from 10.10.10.1?
          When my admin server is down,then my system will be down.
          4.which is the dispatch in the cluster system ?
          my step of configuration of th cluster:
          1.add two managed servers to admin server and edit startweblogic.cmd;
          2.config cluster.(admin server address 10.10.10.1:8168,cluster address 10.10.10.2:7001,10.10.10.3:7001),multicast(237.0.0.1)
          please help explain these questions!thanks a lot!
          2.
          Kumar Allamraju <[email protected]> wrote:
          >Sorry if i wasn't clear, what i mean to say is
          >
          >When you first start the managed server's you have to have admin server
          >up &
          >running.
          >Admin server can go down when cluster is running, but then you can't
          >add servers
          >to cluster
          >and I think its ok to have it that way from administration point of view.
          >
          >Yes, there's no facility to achieve single point of failure for admin
          >servers.
          >
          >--
          >Kumar
          >
          >
          >
          >William Wallace wrote:
          >
          >> I may be misreading that page, but it doesn't really tell me how to
          >> successfully start to start a managed server is the admin server is
          >down. If
          >> you run the managed server script you get an "cannot connect to admin
          >> server" exception if the admin server is not running. Now, I imagine
          >that I
          >> could script something up to restart the admin server if it's down,
          >but that
          >> doesn't protect me from hardware failure.
          >>
          >> "Kumar Allamraju" <[email protected]> wrote in message
          >> news:[email protected]...
          >> > http://e-docs.bea.com/wls/docs60/adminguide/startstop.html#1035064
          >> >
          >> > --
          >> > Kumar
          >> >
          >> >
          >> > William Wallace wrote:
          >> >
          >> > > Is it possible to start a WL6.0 cluster without the admin server
          >being
          >> up
          >> > > and running? If not, are there any workarounds that eliminate the
          >admin
          >> > > server as a single point of failure?
          >> >
          >

Em showing everything is down including the admin server eventhough they are up in Weblogic Admin Console

Hi there,
We are running with Oracle Fusion Middleware 11.1.1.3.0 on top of Oracle Weblogic 10.3.3.0 which is installed on Windows Server 2008 64 bit. We have configured two SOA domains under this middleware home.For example, we will consider the SOA domain name as SOA1 and SOA2. When we logon to SOA1 Em console, Everything is showing the exact status as like SOA1 admin console. Whereas SOA2 is not the same case. SOA2 EM console showing all in red down arrow including Admin server but SOA2 admin console says everything running fine.
We checked the Oracle Doc ID 1484381.1 for more troubleshooting, But they have provided the patch only the version from 11.1.1.5.0 or later. Also we could see below error in the emos.log
[2015-03-03T10:49:58.166+01:00] [AdminServer] [NOTIFICATION:24] [] [oracle.sysman.emas.sdk.model.jmx.JMXUtil] [tid: [ACTIVE].ExecuteThread: '7' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: weblogic] [ecid: 0000KjV2fVZDSc4_RTl3id1Kw52A00005M,0] [APP: em] [dcid: e80eae2a2ac05444:-1dcaadaf:14bcabbbf24:-8000-000000000000029b] Found no object names where one was expected for query: oracle.dms:name=AggreSpy,type=Spy,*
[2015-03-03T10:49:58.175+01:00] [AdminServer] [NOTIFICATION:24] [] [oracle.sysman.emas.model.region.FMWRegionModel] [tid: [ACTIVE].ExecuteThread: '7' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: weblogic] [ecid: 0000KjV2fVZDSc4_RTl3id1Kw52A00005M,0] [APP: em] [dcid: e80eae2a2ac05444:-1dcaadaf:14bcabbbf24:-8000-000000000000029b] Error getting Response metrics
[2015-03-03T10:49:58.176+01:00] [AdminServer] [NOTIFICATION:32] [] [oracle.sysman.emas.model.region.FMWRegionModel] [tid: [ACTIVE].ExecuteThread: '7' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: weblogic] [ecid: 0000KjV2fVZDSc4_RTl3id1Kw52A00005M,0] [APP: em] [dcid: e80eae2a2ac05444:-1dcaadaf:14bcabbbf24:-8000-000000000000029b] Error getting Response metrics[[
Please help us to make sync the SOA2 EM console with SOA2 Admin console.
Thanks
Lakshman,

Hi Lakshman,
what about about the WLS admin console? What is reported there for both
domains?
When starting the managed servers for SOA2 domain, have you provided
the URL of the Admin Server of SOA2 domain?
Cheers,
A.

My Ipod nano 6Th sometimes shuts down when I connect the phones, sometimes it not shuts down, but the volume and standby buttons do not work.

My Ipod nano 6Th sometimes shuts down when I connect the phones, sometimes it not shuts down, but the volume and standby buttons do not work. If I not connect the phones everything works fine. But with the phones connected it goes crazy. I alredy reset, restore and nothing. If I reset and let the phones connect the up and down volumes buttons start to work. But the power/stand by button don´t. I need to disconect the phones to the power/stand by button starts to works. Anyone already have simmilar problem?

A windows error message appears saying iTunes has encountered a problem and needs to shut down.
let's get a crash log from itunes, and send it to the Apple engineers for a look.
Typically, you'll need to configure Dr. Watson on your PC in order to generate crash logs. Windows start menu -> Run. Type in "cmd". Hit return. At the prompt in the command line window that comes up, type in
drwtsn32 -i
And hit return.
This will create crash logs in Documents And Settings\All Users\Application Data\Microsoft\Dr Watson\. There'll usually be a file in here called "drwtsn32.log"
prior to collecting the itunes crash log, delete any existing crash logs in there. (we want to make sure we send the correct crash log.)
Generate the crash, collect the crash log, and and send it as an attachment to this email address.
in the email to Roy, be sure to include the following information:
- A link to the thread on Apple Discussions where the issue is being discussed
- The username you are using in the thread
- The version of iTunes you are using or trying to use
- the version of Windows you are using (mention service packs)
- A concise description of the issue you are seeing
- The exact text of the error message you are seeing

I have a 2013 mac pro and the volume keys aren't changing the volume of my LED display. The icon shows up as going up or down but the volume seems to not adjust.

I've had this computer since october of 2013 or so and I have just recently run into this problem. I use the volume keys on the keyboard and I hear the tick sounds and it shows that its going up and down but the volume doesn't actually change. I've looked in the "sound" settings and everythings seems to be correct... I can't adjust the sound in their either though. I pay too much to be having an issue like this.

Possible? Yes. Likely? I'm not sure.
In my house, I would suspect that either one of our pets chewed on a cable or dislodged a connector, or somebody bumped a connection loose, but then I would expect either no volume at all or hum from a grounding problem. Clear, non-zero constant volume is harder to explain.
You say adjusting the output volume directly in the Sound settings or on the menu bar also has no effect on the audible output?
You might want to go ahead and answer the question about connections. Somebody else might come along who recognizes a possible problem with the particular combination you are using. I don't have exactly your model of Mac Pro or display. (Is yours the Apple LED Cinema Display? Which size?)

My computer shuts down but the restart feature will not work. It just hangs.

Hello
I have a MS6547 version 1 (645 Ultra Motherboard)
The problem I am having is that my computer will not restart. If I press the power off button in windows it will shut down but the restart windows function will not work it just hangs at (Windows is shutting down)
I zero'd my hard drive and installed a fresh copy of windows but the restart feature still doesn't work. Even when I was in the middle of installing windows when the computer says it will reboot in 15 second that hangs on restarting computer as well/
Hope someone can help
My spec is
645 Ultra Motherboard
2.2gb Pentium CPU
256ddr2100 RAM
ATI Radion Graphics Card
60gb Hard Drive
LG CDRW
Please Help.

Hello and welcome!
It sounds like it has a hard ware reason. I suggest you take the motherboard out, to see that there are no stand-offs/spacers/distanser left unused creating a short.
Also, remember to have as little hardware as possible when you install Windows. No extra PCI-cards, USB-devices and such.
If the system has worked well earlier, above still rules, but here are some many other reasons for the described symtoms:
http://www.aumha.org/win5/a/shtdwnxp.php

Strange WLS6.sp2 Oracle DB Reconnect issue in a Cluster but ONLY on the Admin server

Any Ideas? ->
I am having a issue when our oracle db server goes down and when we try
to reconnect the Pool via weblogic I am getting this error. This only
happens on the Admin server for the cluster, none of the managed servers get
this and they all seem to be ok. Any ideas?
-Pete
**** Below is the stack trace:
java.sql.SQLException: Io exception: Broken pipe
at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:114)
at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:156)
at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:269)
at
oracle.jdbc.driver.OracleStatement.executeNonQuery(OracleStatement.java:1329
at
oracle.jdbc.driver.OracleStatement.doExecuteOther(OracleStatement.java:1232)
at
oracle.jdbc.driver.OracleStatement.doExecuteWithBatch(OracleStatement.java:1
353)
at
oracle.jdbc.driver.OracleStatement.doExecute(OracleStatement.java:1760)
at
oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java
:1805)
at
oracle.jdbc.driver.OraclePreparedStatement.executeUpdate(OraclePreparedState
ment.java:322)
at
oracle.jdbc.driver.OraclePreparedStatement.execute(OraclePreparedStatement.j
ava:366)
at
weblogic.jdbc.pool.PreparedStatement.execute(PreparedStatement.java:45)
at
weblogic.jdbc.rmi.internal.PreparedStatementImpl.execute(PreparedStatementIm
pl.java:289)
at
weblogic.jdbc.rmi.SerialPreparedStatement.execute(SerialPreparedStatement.ja
va:398)

Hi,
As i understand is OS is clustered not the db. Better is to manually shutdown the db clean and then start it.
TO start login through sqlplus sys as sysdba
1. startup
2. Once its done, start the listener
3. Start the application
Anand

HT4914 I turn on the iTunes Match in my iphone3GS, but the itme of "show all musics" not show up and turn on, so when I open musics in my iPone3GS, the musics seems not be matched with iClouds.

Dear Sirs,
I turn on the iTunes Match in my iphone3GS, but the itme of "show all musics" not show up and turn on, so when I open musics in my iPone3GS, the musics seems not be matched with iClouds.I means it doesn't work on.

Hello there Jameskuo47,
In researching the issue you are experiencing I found an article that should help get your iTunes Match content to your iPhone. The name of the article is iTunes: How to add a computer or iOS device to iTunes Match and you can find it here: http://support.apple.com/kb/ht4913.
This section specifically:
To add an iOS device to iTunes Match
On your iOS device, go to Settings > Music.
Note:
iTunes Match requires iOS 5.0.1 or later; you can find the
latest iOS software here'
Tap the iTunes Match switch to On.To access your music in iCloud, open the Music Player app on your device.
Your music in iCloud will be integrated into your local music library. A download button will appear to the right of any content that you have in iCloud that doesn't already exist on your device.
Important:
When enabling iTunes Match on your iOS device, the music library on your iOS device will be deleted and then replaced with your music in iCloud.
Syncing music with iTunes will be disabled while iTunes Match is enabled on your iOS device.
By default, when adding an iOS device to iTunes Match, downloading over a cellular network is enabled1. To disable downloading over cellular for iTunes Match, choose Settings > Music > Use Cellular Data > Off.
All the best,
Sterling

I've bought and downloaded music from itunes, but the ends of almost all my songs are cut off and will not play, how can I fix this?

I've bought and downloaded music from itunes, but the ends of almost all my songs are cut off and will not play, how can I fix this? Most of the music cuts off abouthalf way through the song, then it skips to the next one. Itunes also says I have not purchased the album though it is listed under my purchased albums. It's incrediabley frustrating, please help.

go to the itunes store. select more in the bottom right select purchased. then press the cloud icon to DL striaght to the phone. Id use wifi. you can also DL into computer then synv over to phone.

My iphone 4 contantly has no service and turns off by itself all the time?

my iphone 4 contantly has no service and turns off by itself all the time?

Hi hqhair@aol,
If you are having unusual service and shut off issues with your iPhone, you may find the following articles helpful:
iPhone: Troubleshooting No Service
http://support.apple.com/kb/ts4429
iPhone: Hardware troubleshooting (under the Power/Battery section)
http://support.apple.com/kb/ts2802
Regards,
- Brenden

Newbie cluster question: where does the admin server live?

Hello, I'm looking at clustering for our application where I work, and so I'm reading through the cluster-related documentation for 11g. I have a sort of an architecture question: where should the admin server be started? Hypothetically speaking, if you have two nodes for your cluster, would the AdminServer run on a 3rd box which sort of stood in front of the two nodes?
Thanks much -

The ideal situation would be for your admin server to be separate from the machines hosting your managed server. This allows you to control access to the admin server, eliminate the performance impact if you have the admin + managed on the same host, and limits impact if youir #1 host fails, etc.
But companies may be unwilling to invest in a distinct (3rd) host just for the admin server, especially if you have multiple environments ( prod, testing, dev, etc. ).
So usually the admin winds up sharing the host with a managed server.

Purchased songs in the past then recently purchasd new songs, but the new purchases replaced all of my old purchases. How can I retrieve my old purchases? Cannot find them in any of my playlists.

Purchased songs in the past then recently purchasd new songs, but the new purchases replaced all of my old purchases. How can I retrieve my old purchases? Cannot find them in any of my playlists.

If you purchased all of the songs through itunes store, please follow these steps:
1. Open up Itunes and Click on Itunes Store
2. Once you're in the Itunes Store look to right side of the screen and you should see the word "purchased". Click purchased and you'll be sent to a purchase screen.
3. Click on "All Songs" and then it will show all the songs you've downloaded. From there you just hit the button that looks like a cloud with an arrow on it, and it will download all the songs all over again.

After updating to IOS 6.0.1 I cannot copy photos from the iPhoto library to the iPhone. The events appear correctly but the photo count in all the Events is 0

After updating to IOS 6.0.1 I cannot copy photos from the iPhoto library to the iPhone. The events appear correctly but the photo count in all the Events is 0

Same problem here, and it's not isolated.
https://discussions.apple.com/message/20228281#20228281
I believe you will find you can again sync Photos if you delete the "iPod Photo Cache", but predict that any subsequent attempt will fail. In my case, the enxt sync removes all the photos again - I've seen other reports of error messages upon sync. Mine just fails silently. :-)

Cannot use file for clustered server. Only formatted files on which the cluster resource of the server has a dependency can be used. Either the disk resource containing the file is not present in the cluster group or the cluster resource of the Sql Serve

Hi
Windows serv 2012 cluster on sql 2012 cluster with 2 instance. on works fine , Second instanc ewhen i try to creat DB a get this message.
Cannot use file for clustered server. Only formatted files on which the cluster resource of the server has a dependency can be used. Either the disk resource containing the file is not present in the cluster group or the cluster resource of the Sql
Server does not have a dependency on it.
CREATE DATABASE failed. Some file names listed could not be created. Check related errors. (Microsoft SQL Server, Error: 5184)
Any help please
kam
KAMEL

Hi Saurabh
Exactly I have SQL SERVER 2012
Failover Clustering in windows server 2012 with two nodes with
two instances and exactly I run them in the same server and each instance with
three drives Backup, Data and log.
KAMEL

I just used a creative cloud , but the thing is that all the apps are trial . Did I buy a trails?

I just used a creative cloud , but the thing is that all the apps are trial . Did I buy a trails?
if that is Tell me how Am I going to get my money back
thanks .

Log out of your Cloud account... Restart your computer... Log in to your paid Cloud account
-Sign in help http://helpx.adobe.com/x-productkb/policy-pricing/account-password-sign-faq.html
or
A chat session where an agent may remotely look inside your computer may help
Creative Cloud chat support (all Creative Cloud customer service issues)
http://helpx.adobe.com/x-productkb/global/service-ccm.html

BI cluster DOWN but the services and the admin server is all UP in OBIEE 11G.

Similar Messages

Maybe you are looking for