BI_CONT Latest Level

Hi Guys,
What is the latest level for BI_CONT (BI 7.0)? SAP_BW is level 20.
Thanks,
Timi Jones

Hi Timi:
    Please refer to SAP Note 1254946 - BI_CONT 704:Information on Add-On Support Packages
II. Available Support Packages for BI_CONT 704 :
Following is the schedule for the BI_CONT Support Packages
Support Package       Type    Release Date Support pack Note
SAPK-70401INBICONT    CSP      21.11.2008
SAPK-70402INBICONT    CSP      03.03.2009
SAPK-70403INBICONT    CSP      04.05.2009
SAPK-70404INBICONT    CSP      29.09.2009
SAPK-70405INBICONT    CSP      07.12.2009
SAPK-70406INBICONT    CSP      01.03.2010
Best Regards,
Francisco Milán.

Similar Messages

Component BI_CONT: SP level 0001 is incorrect, expected 6

Hello!
I faced with problem after installed the Solution Manager 7.01 (with SP26)
In step INSTALLATION CHECK on the Diagnostics Prerequisites I get status "Activity Error" with explanation
Component BI_CONT: SP level 0001 is incorrect, expected 6
May be somebody know what I need do?
Or I can do some steps to resolved this problem?
Best regards
Dmitry Zakharenkov

Hi
Please verify the solution manager met all the prerequest specified in the note for ur SP level
[Note 1274287 - End-to-End Diagnostics 7.0 EHP1 SP18 to SP26|https://websmp230.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=1274287]
if no, please make them equal to the note
and if yes, you can check the fix in the note avoid the activity error
[ Note 1297598 - Fix in prerequisite|https://websmp230.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=1297598]
Jansi

My weather gadget was working under 3.6.22. I upgraded to the latest level. didn't like it and reinstalled 3.6.22. Now firefox won't install the gadget saying not verified260 yet it was working

I was running 3.6.21 and auto upgrade took me to 3.6.22 my weather gadget from the uk met office was working. When Firefox came up it showed me V6.0.2. I installed it but as the weather gadget wasn't supported at this level I downgraded back to 3.6.22. I attempted to reinstall the gadget and firefox is stopping installation with the following message www.metoffice.gov.uk/gadgets/firefox/metoffice1.6xpi because signing could not be verified 260

What model iPod
Identifying iPod models
http://support.apple.com/kb/HT1353What iOS version (Settings>General>About>Version)
What computer OS and version? I suspect a Mac with OSX 10,5,8
Whart version of iTunes?
A Mac with OSX 10,5.8 should synce but not restore with iTunes version 10.6.3
iTunes 10.6.3
To restore you need iTunes 10.7 or later and that requores OSX 10,6,8 or later

BI_CONT Patch levels and Transports

Hi,
Our BI development and test systems are on a different (lower) BI Content Patch level than our productive system is.
Can this cause problems (errors) when transporting to production?
Thanks.

Hi,
I alreadyu made a test from different support packages version (even BW version from 2.1 to 3.1) and i worked.
My transport included only specific and no customizing, just infocube, objects,... not Business Content developpments.
Regards
CYril

I have an IMac running the latest level of Lion. Since installing Lion and also being forced to replace the hard drive I have a problem with the screen intermittently go all white. Happens about 8 to 12 times a day. I am using Wild Blue as my ISP.

I am looking for anyone in the west Tennessee area using Wild Blue along with Apple IMac who is having a problem with their screen going complelely white every so often. Have had the maching into the Apple store in Memphis. They could not get it to fail. Help

TutorDaddy, if this Mac is still covered by the initial warranty or under AppleCare, take it in and have it looked at. As the old label used to say, there truly are "no user serviceable parts inside." Kernel panics very usually indicate failing hardware.
I have an older iBook G4 that started developing kernel panics and like you, despite reinstalling the OS from a freshly formatted volume, they kept continuing. I looked at the crash log and saw that in each instance of panic, the last bit of code to be accessed had something to do with AirPort. Knowing that the AirPort software was at then current levels, I surmised the problem to be a bad AirPort networking card which, on that particular model of the iBook, was a very small module attached directly to the logic board. Since the computer was out of AppleCare, I broke the machine down myself (I didn't realize that there could be so many barely visible screws in one machine) and removed the offending piece of hardware. My iBook lives but without WiFi, it now sits as a more or less desktop machine needing an ethernet connection to stay connected to a network.
I do not suggest you break into your iMac. First of all, I'm guessing one would need to be able to pull off the glass and have the necessary glue to reattach it, which is not really available to us consumers. If you're feeling adventurous enough to read the crash logs from each panic, you might be able to surmise the hardware component (or badly written application or library; it can happen) that's causing the panic. If it's a software issue, remove the offending software app and see if the panics return. If it's a hardware issue, it's best to let a competent service tech qualified on Apple hardware to handle it.
[edited to add:]
After browsing through related problems in the discussions, I saw this link to a third-party web site being handed out. Perhaps you'll find it useful: http://www.thexlab.com/faqs/kernelpanics.html
Message was edited by: Stephen Adams

What is the latest Patch level?

Dear All,
Software component    Release         Level
SAP_HR                             604              0069
EA-HR                                606               0021
EA-HRGXX                        606              0021
EA-HRRXX                        606              0021
EA-HR_MSS                     1.0                0004
ERECRUIT                        606              0006
In my system this above levels are there.
What is the latest level? or Can I go with this above only?
Regards
Somu

You need to get it from here https://websmp209.sap-ag.de/~sapidb/011000358700000140852014E/SAP_HREnhP604EA-HREnhP606.htm https://websmp106.sap-ag.de/patches

BI Content patch level on BI system and source system

Hi all, hope you can help
our BI and ECC6 systems are separated. My question is, do we need to be on the same BI_CONT patch level in BI and ECC6? Our current patch level in BI is 7.0.3 level 9 and in ECC6 we have not loaded any patches, however we have BI content which was delivered with the install.
Regards
Charl

Plan on applying the Linux and Solaris versions of all applications patches to the respective servers.
How To Apply a Patch in a Multi-Server Environment
http://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=136342.1
Patches must always be applied in their entirety. If you apply a patch to update
your filesystem, you must also apply the corresponding database and generation
portions of the patch if they are included. When updating the filesystem in a
multi-server environment, you should apply the patch on all servers.
You can see what patches have been applied to which nodes in OAM on the Applied Patches page. Oracle will not advise you to have patch differences, otherwise supportability comes into question due to partial patch application.

BI 7.0 BI_Content Transformations.

Experts:
We are on this BI_Cont patch level:
BI_CONT 703 0014 SAPKIBIIQ4 Business Intelligence Content Component Supp. Pkg.
We are installing BI content for many cubes. I'm not finding many Transformations in this content level.
I would like to minimize the migration effort and the manual correction of transformation routines that do not convert correctly.
Can you suggest how I can locate more BI Content Transformations or recommend how best to correct transformation routine conversion errors?
Thanks
Den

BI content with transformations is a widely discussed topic and no one is quite sure of when the content is to be migrated . In all likelihood - some of it has but all of it has not. The best bet would be to check the release notes for the same in help.sap.com but then trawling the same is tedious....
We had similar issue of installing BCont as the manna for migrating all the business content but decided otherwise since most of the content was not yet in 7.0 versions...

RMAN level 0 and level 1 tablespace/database relationships

If I take an incremental level 0 backup of an entire database and then take a level 0 of an individual tablespace, does an incremental level 1 backup of that tablespace reference the incremental level 0 of the tablespace or of the entire database? If I change the order of the level 0 backups, does it change the reference of the tablespace's level 1?
I guess what I'm asking is does the the level 1 incremental reference the latest level 0 regardless of whether it's for the whole database or just the tablespace or does a level 1 always reference it's own level 0?
Also, if I take a level 0 of the database Sunday night, and then a level 1 of the database every night after that as well as multiple level 1s of a tablespace throughout each day, will Tuesday night's database level 1 include all of Monday's tablespace level 1s?
I just can't seem to find oracle documentation about these relationships.

Hemant K Chitale wrote:
"Database" and "Tablespace" are logical groupings for our convenience.
RMAN tracks backups at the datafile level.I think that is exactly what I was looking for. I just want to clarify my understanding.
If I run a level 0 on the database Sunday night, a database differential level 1 each night, and a level 0 on a specific tablespace each morning at 6AM followed by hourly tabelspace differential incrementals only for that tablespace, then Monday night's level 1 will be an incremental of the entire database pointing to Sunday's level 0 except for that specific tablespace for which it will be incremental from that tablespace's last level 1. Does that sound right? If so, then it sounds like to restore the entire database to its state on Tuesday at noon from media, I have to put these backups back on disk before running the RMAN restore:
- database level 0 from Sunday
- Monday night's database level 1
- Tuesday's tablespace level 0
- Tuesday's tablespace level1s from 7AM - noon
This means I can avoid putting Monday's tabelspace incrementals back right? From what I gather, the RMAN restore will put the blocks back into the datafiles at their correct SCNs, and then if there are any archive logs after that point in time, the RMAN recover will apply them. Does that all sound correct?

SOLMAN_SETUP - DIAGNOSTICS Prerequisites fails for BI_CONT

Hi,
We have installed a new Solman 7.0 EHP1 (with new SR1 DVD/media) and then updated it to SP27. SP27 patching has been done with the SPS stack - and this has automatically installed/updated new component ST-BCO and updated BI_CONT to 706 SP1.
During Post Installation configuration, under SOLMAN_SETUP, we have observed that "DIAGNOSTICS Prerequisites" step is failing with the message
Component BI_CONT: release 706 is incorrect, expected 704: see note 1274287
Component BI_CONT: SP level 0001 is incorrect, expected 6
As per SAP note 1274287, our system meets minimum system requirements for BI_CONT.
But not for ST-BCO as minimum requirements is - Support Package 01 for ST-BCO 400 (SAPK-40001INSTBCO ?)
My questions are:
Any idea why the Diagnostics Prerequisites are still failing.
I can't find this patch anywhere in sap service marketplaceso any idea from where to download this.
Appreciate your views on this asap, please.
BR
Davinder

Appreciate your quick response. Following the recommeded Note -- solves my first problem - wow.. Thanks again for this.
Will really appreciate if you can clarify on my second query also, please-
"Note 1274287 - End-to-End Diagnostics 7.0 EHP1 SP18 to SP27" - our system meets all the prerequisites, except for the component ST-BCO - our system has ST-BCO 400 SP0.
But requirement is to have Support Packages 1 (SAPK-40001INSTBCO).... which i am not able to find out from SAP Service marketplace,
Any idea how this can be downloaded, please
Requirements with component ST400 for SP27
    o Solman 7.0 SP27 ABAP-Stack:
       - Support Package Stack 08 for SAP WEB AS 7.01 AS ABAP
       - Support Package 08 for PI_BASIS 701 (SAPK-70108INPIBASIS)
       - Support Package 08 for SAP_ABA 701 (SAPKA70108)
       - Support Package 08 for SAP_BASIS 701 (SAPKB70108)
       - Support Package 08 for SAP_BW 701 (SAPKW70108)
       - Support Package 19 for CPRXRPM 400 (SAPK-40019INCPRXRPM)
       - Support Package 22 for SAP_AP 700(SAPKNA702)
       - Support Package 18 for BBPCRM 500 (SAPKU50018)
       - Support Package 07 for CRMUIF 500 (SAPK-50007INCRMUIF)
       - Support Package 01 for BI_CONT 706 (SAPK-70601INBICONT ?)
       - Support Package 01 for ST-BCO 400 (SAPK-40001INSTBCO ?)
       - Support Package 27 for ST 400 (SAPKITL437)
       - Support Package 04 for ST-PI 2008_1_700 (SAPKITLRD4)
       - Support Package 00 for ST-A/PI 01N_700SOL (SAPK-01NS2INSSA)
       - Minimum Support Package 24 for ST-ICO 150_700 (SAPK-1507OINSTPL)
       - Minimum Support Package 07 for ST-SER 701_2010_1 (SAPKITLOS7)
BR
Davinder

Maintain same dunning level

Hi Gurus,
Appreciate some help here.
I've maintained 3 dunning levels and "always dun" for the 3 levels are setup.
How can I keep the dunning level at level 1 whenever a dunning is perform? Is it possible to do it? I've try to change the dunning level in the master record but it's not working. The dunning proposal is still taking the latest level (eg. level 3) eventhought I've changed the dunning level to 1 in master record.
I know the dunning level can be edit during Dunning proposal but it will be time consuming to edit the individual item every time a dunning is perform. Anyone has a good suggestion?
Thank you

Thanks for the response.
Can you elaborate more where can I checked?
Does it mean that customer master record can't fixed the dunning level?

Which BW components must be upgraded at the same time as our BI 7?

Hello,
We have scheduled to upgrade our Javastack and BI 7 server to a more recent version (with the support pack preceding the last available one)
Could someone tell me which component must be upgraded at the same time of our javastack and SAP BW system ?
Hereunder our current situation of BW Support package&javastack level:
SAP_BASIS (SAP Basis Component)                700 0014
SAP_ABA (Cross-Application Component)           700 0014
ST-PI (SAP Solution Tools Plug In)                2005_1_700 0006
PI_BASIS (PI_BASIS 2005_1_700)                2005_1_700 0014
SAP_BW (SAP Netweaver BI 7.0)               700 0016
FINBASIS (FINBASIS 600 : Add-On Supplement)          600 0011
SEM-BW (SEM-BW 600: Add-On Supplement)          600 0011
ST-A/PI (Servicetools for the other App/Netweaver 04)     01J_BC0700 0000
BI_CONT (Business     Intelligence Content)          703 0008
Javastack                         7.0 SP 14
Thanks in advance
Dominique

if your SAP_BW support package level is 16. then java level also should be level 16.
As you mentioned, you java stack level would be 14. so upgrade the level to level 16.
Before upgrading please take up this point in mind. Now the latest level of SAP_BW is level 19
so upgrade the BW system SAP_BW support package level to 19 and others SAP_BASIS and SAP_ABA would be 17.
then upgrade the java stack level to 19.
Hope this would help you.

SAP BI7 GUI

Hi,
As we are about to upgrad into SAP BI 7, can you please advise what is the latest SAP GUI for BI7? Any Support Pack for it?
Do you normally do the SAP GUI upgrade together with the BI7 techincal upgrade? Any problem?
Please advice, thanks.

Hi Lynn,
find the below path
go to service.sap.comswdc --> download ( click on it ) -
>Installations and Upgrades - Entry by Application Group" SAP Frontend Components" SAP GUI FOR WINDOWS" SAP GUI FOR WINDOWS 7.10 CORE
SAP GUI Family
Component/     Description/                                         Release         /Latest Level Available
SAP_ABA     Cross-Application Component     700              20
SAP_BASIS     SAP Basis Component                          700              20
PI_BASIS     PI_BASIS 2005_1_700                   2005_1_700              20
SAP_BW     SAP NetWeaver BI 7.0                          700              22
BI_CONT     Business Intelligence Content     703              15
Regards,
Sushant
Edited by: Sushant Tiwarekar on Jan 11, 2010 11:31 AM
Edited by: Sushant Tiwarekar on Jan 11, 2010 11:35 AM

Debugging is not working in R/3 from WebDynpro-ABAP developed webpage input

Dear Friends,
We are facing a serious problem for debugging. Expecting valuable input for the same.
Debugging is not working in R/3 from WebDynpro-ABAP developed webpage input in Production Server.
The debugging (for WebDynpro-ABAP application) is working in Dev. Server for
1st ] Within R/3
Ex. debug for bapi within R/3. i.e. value enter as input in R/3 only.
2nd ] From webpage to R/3
Ex. Some input given on the internet web page developed through WebDynpro and external breakpoint set in R/3 it works. It directs to R/3 code through debugging.
In Prod. Server the 1st case above is working but the 2nd case is not working.
In Prod. Server the WebDynpro developed applications are running successfully through internet explorer webpage inputs. So running the application is not a problem in prod. Server but debugging of the same is the problem.
The setting which are done in Prod. server are,
1] RZ10 in parameters are set for port and host name.
2.1] In SMICM check for ICM.
2.2] Host file updated in Windows-System 32.
3] In SICF following services are active,
3.1] default_host/sap/bc/webdynpro
3.2] default_host/sap/public/bc
3.3] default_host/sap/public/bc/webdynpro/viewdesigner
3.4] default_host/sap/bc/wdvd
3.5] default_host/sap/public/icman
3.6] default_host/sap/bc/gui/sap/its/webgui
3.7] default_host/sap/public/ping
3.8] default_host/sap/bc/error
3.9] default_host/sap/bc/echo
4] In SE80
4.1] Internet services-System-are published
4.2] Internet services-WEBGUI-are published
4.3] Utilities-Setting-ABAP Editor-Debugging-Username & New Debugger set.
4.4] Utilities-Setting-ABAP Editor-Editor-Front-End Editor(New) set.
5] In Su01 for user profiles sap_all & sap_new is assigned and role SAP_BC_WEBSERVICE_DEBUGGER is assigned.
6] The support packages are also updated to latest level.
7] Gone through following links but not getting any clues.
http://help.sap.com/saphelp_nw70ehp1/helpdata/en/48/74d50bd1431b5ae10000000a42189c/frameset.htm
http://help.sap.com/saphelp_nw04s/helpdata/EN/77/3545415ea6f523e10000000a155106/frameset.htm
Thanks in Advance.
Best Regards,
Abhijit.

No cross posting
Read the "Rules of Engagament"
Regards
Juan

Missing business systems in model configurator

Hello,
i am on PI 7.1 and have to configure a SRM scenario. In step "assign communication component" (business system) in the model configurator all business systems are missing.
Please the screenshot:
[http://img211.imageshack.us/i/bild1m.png/]
What configuration is missing? In SLD all business systems with software are maintained.
Thanks for help
Regards, Trevor

Dear Trevor,
Let me solve your problem,
In the snapshot it says clearly that "Search Criteria" Communication Component Selection "Value" for Product SAP SRM 7.0
Which means in SLD it will search for the Business Systems which got assigned with Product SAP SRM 7.0.
So please check your SRM Business System "MSRCLNT001_SRM" and assign the Product SAP SRM 7.0 to it in SLD.
If you couldn't find the Product in the SLD then you must update your Content Repository to latest level SAP_CR 6.6 in SLD.
Please check the note for SAP CR Update:
SAP Note 669669 - Updating the SAP Component Repository in the SLD
Similarly you may face the problem for your ERP as well, so select Product SAP ERP 6.0 EHP 4 if you are implementing the same.
Hope this is helpful.
Regards
Praveen K

BI_CONT Latest Level

Similar Messages

Maybe you are looking for