BI Content Activation Error in Routines

Hello Gurus,
When I am activating transformations for SRM 5.0 BI data flow, we received following errors in routines
Object '4A41TQSJKSQAXL7KUH18UHY26' (ROUT)  not in active version 'A'.
Could anyone suggest process to find specific routine using technical name? This information is required to find, which infoprovider/transformation mapping is having this routine.
We are unable to find this routine by technical name in BI content. So if we know corresponding Infoprovider or Transformation technical name, we can try to re-install the same.
Would really appreciate any inputs in this regard.
Best Regards
Venkat
Edited by: Siegfried Szameitat on Oct 28, 2008 4:45 PM
Deleted your promise to assign points as it is against the rules.

Hi,
if this is a routine used in a transformation check out table rstransteprout with the ID of the routine and then take the transformation ID and look into table RSTRAN. There you will find information about the source and the target of the transformation.
Best regards
Christoph Vortkamp

Similar Messages

  • BI Business content activation error

    Dear Gurus,
    I tried installing the business content InfoObject catalogs:
    0FIGL_CHA01 (FIGL: Characteristics)
    0FIGL_KYF01 (FIGL: Key Figures)
    But the job is cancelled and the message is 'Transfer structure 0COMPANY_TEXT_BA does not exist'.I'm able to see all
    the infoobjects in the InfoObject catalog 0FIGL_CHA01 are existing active. But few transfer rules are inactive and
    I tried activating the transfer rules and getting the same error meassge 'Transfer structure 0COMPANY_TEXT_BA does not exist'. I tried as mentioned in the note:1077655 and still not able to fix the issue
    Can you please help?  I give full points.
    Note: I did replication of the following before activating BI content on BI side:
    0BUS_AREA_ATTR           (no issue with this)
    0BUS_AREA_TEXT          (no issue with this)
    0CHRT_ACCTS_ATTR     (no issue with this)
    0CHRT_ACCTS_TEXT     (no issue with this)
    0COMPANY_TEXT          (inactive transfer rules)
    0COMP_CODE_ATTR          (inactive transfer rules)
    0COMP_CODE_TEXT          (inactive transfer rules)
    0GL_ACCOUNT_ATTR     (inactive transfer rules)
    0GL_ACCOUNT_T011_HIER     (inactive transfer rules)
    0GL_ACCOUNT_TEXT      (inactive transfer rules)
    Thanks in advance
    Seenu

    One reason for you Inactive Transfer structures could be because some of the Objects in BW are inactive or not installed.
    There are programs in SE38 which re-activate InfoObjects/ InfoSources/ Update Rules etc in Mass put in ACTIVATE
    Also when you did a replication on the Source System to pull the datasources check that the Datasource is there. You need a datasource in order to have an InfoSource attached to it.

  • BI Statistics Technical Content Activation Error

    I got some errors when activating BI Statistics technical content in SPRO and could not find any information about this error on SDN. I would really appreciate your help.
    Thank you.
    Tony
    Below is part of the error message from job log:
    Variant '0PAK_472D695A0ZS3DWVBA4H1OO9A6' of process type 'LOADING' not found in A version
    A type "Attribute Change Run" process has to follow process "Execute InfoPackage" var.0PAK_472D695A0ZS3DWVBA4H1OO9A6 in the chain
    A type "Data Transfer Process" process has to follow process "Execute InfoPackage" var.0PAK_472D695A0ZS3DWVBA4H1OO9A6 in the chain
    A type "Generate Index" process has to follow process "Execute InfoPackage" var.0PAK_472D695A0ZS3DWVBA4H1OO9A6 in the chain
    A type "Activate DataStore Object Data" process has to follow process "Execute InfoPackage" var.0PAK_472D695A0ZS3DWVBA4H1OO9A6 in th
    A type "Data Transfer Process" process has to follow process "Execute InfoPackage" var.0PAK_E8U9KCLMI7HW76ZSYTSL0N7NA in the chain
    A type "Generate Index" process has to follow process "Execute InfoPackage" var.0PAK_E8U9KCLMI7HW76ZSYTSL0N7NA in the chain
    A type "Data Transfer Process" process has to follow process "Execute InfoPackage" var.0PAK_EAYZPOK7VL8KCD6D6HI3UYUT2 in the chain
    A type "Generate Index" process has to follow process "Execute InfoPackage" var.0PAK_EAYZPOK7VL8KCD6D6HI3UYUT2 in the chain
    A type "Generate Index" process has to follow process "Execute InfoPackage" var.0PAK_44I75TQHBEZKMPJT67XC0VKQJ in the chain
    Version 'M' of chain 0TCT_C0_DELTA_P01 was saved without checking
    InfoPackage  no longer exists in object version A in table RSLDPIO
    Variant '0PAK_472D695A0ZS3DWVBA4H1OO9A6' of process type 'LOADING' not found in A version
    A type "Attribute Change Run" process has to follow process "Execute InfoPackage" var.0PAK_472D695A0ZS3DWVBA4H1OO9A6 in the chain
    Version 'M' of chain 0TCT_C0_DELTA_P01 was saved without checking
    Start of Process Chains
    ABAP/4 processor: UNCAUGHT_EXCEPTION
    Job cancelled

    Hi Ramesh,
    That's the point. Admin cockpit pops up a message:
    "Before you can call the BI Administration Cockpit, the technical content has to be installed and customized."

  • Bussiness Content Activation error in 0FIGL_O02 [General Ledger: Line Items

    Hi Folks
    I'm trying to activate the bussiness contents of  a DSO named 0FIGL_O02 [General Ledger: Line Items] which belongs to the General Ledger Accounting module.
    When i select the DSO "0FIGL_O02" from the select objects of the Bussiness contents, it pops me up with an error stated as below
    " Version A of DataStore object 0PP_DS52 does not exist
    Message no. RSDODSO102 "
    It doesnt even transfer the DSO object to the INSTALL screen in business content even after getting the above error .
    What i need to know is that
    1. Why did this error occur ?
    2. To solve this error , should i raise an OSS note ?
    3. What is this object named as "0PP_DS52" in "0FIGL_O02" DSO ?
    Need answer - URGENT !
    From
    Manesh

    FIGL takes data from all other modules and reports it to finance. The dependent object 0PP_DS52 needs to be activated it seems for the FIGL settings to get activated

  • BI Content activation error in 2004s

    I am trying to activate the BI Content InfoObjects in Netweaver 2004s and getting a short dump. "OBJECTS_OBJREF_NOT_ASSIGNED".  From ST22 the short message says"Access via 'NULL' object reference not possible.". There is only one OSS notes (694746) relevant to this error message. However, that's not applicable to the NW2004s version.
    PI_BASIS : 2005_1_700 level 11
    SAP_BW : 700 Level 12
    Any sugestions ?

    Dear Bala,
    Can u please explain in little detail how you got this problem solved.
    I am facing the same proble,.
    Regards,
    Sane M. V.

  • BI content activation error

    Hy, everybody
    I try to activate BI content (BI 7.0). I Selected Install in Background.
    In SM37 transaction i see that process is canceled.
    I don't know there is a problem.
    Could you help me?
    Thanks in advance.
    Best Regards,
    Arunas Stonys

    Hi,
    Besides what Tony has said, a few of things you may want to look at:
    1.  Look at the log for the install, the job log and system/Application Log
    2.  You may not have the necessary authorisations for this.  Get a SAP_ALL kind of a role attached to ur ID.
    3.  Try installing the source systems first and then load the content in the background. OR
    4.  Load one scenario in the foreground.  The log will appear in front of you.  Taken it on from there for the full install.
    Rgds

  • 0IC_C03: 2LIS_03_BF Transformation Start Routine Activation error

    Hi all,
    Iam getting activation error (Start Routine) while activating the transformation for the 2LIS_03_BF (Material Movements) data source for 0IC_C03 INFO CUBE. Iam getting an error for the Start Routine  and the error message is as follows:
    + E:In PERFORM or CALL FUNCTION "ROUTINE_9998", the actual parameter "SOURCE_PACKAGE" is incompatible with the formal parameter "DATA_PACKAGE".+
    Scenario: As per my client requirment i have tried to add on info object in to the existing info cube i.e., Movement Type which is an existing field in the info source and the data source and i have tried to map the same in the transformations between the info source and the info cube and activated the transformation. Then iam getting the above said start routine error, so to avoid this i have removed that object i.e., movement type from the info cube and tried to reactivate the transformations still iam getting the same routine error.
    Please suggest me th approach to resolve this issue.
    Regards,
    Prabhakar

    Hi Chandu,
    Please find below is the routine:
    PROGRAM trans_routine.
          CLASS routine DEFINITION
    CLASS lcl_transform DEFINITION.
      PUBLIC SECTION.
    Attributs
        DATA:
          p_check_master_data_exist
                TYPE RSODSOCHECKONLY READ-ONLY,
    *-    Instance for getting request runtime attributs;
        Available information: Refer to methods of
        interface 'if_rsbk_request_admintab_view'
          p_r_request
                TYPE REF TO if_rsbk_request_admintab_view READ-ONLY.
      PRIVATE SECTION.
        TYPE-POOLS: rsd, rstr.
      Rule specific types
        TYPES:
          BEGIN OF tys_SC_1,
         InfoObject: 0STORNO Reversal Indicator.
            STORNO           TYPE /BI0/OISTORNO,
         InfoObject: 0RT_PROMO promotion.
            RT_PROMO           TYPE /BI0/OIRT_PROMO,
         InfoObject: 0VAL_CLASS Valuation  class.
            VAL_CLASS           TYPE /BI0/OIVAL_CLASS,
         InfoObject: 0DOC_DATE Document Date.
            DOC_DATE           TYPE /BI0/OIDOC_DATE,
         InfoObject: 0STOCKTYPE StockType.
            STOCKTYPE           TYPE /BI0/OISTOCKTYPE,
         InfoObject: 0STOCKCAT Stock  Categories.
            STOCKCAT           TYPE /BI0/OISTOCKCAT,
         InfoObject: 0PSTNG_DATE Posting date in the document.
            PSTNG_DATE           TYPE /BI0/OIPSTNG_DATE,
         InfoObject: 0COMP_CODE Company Code.
            COMP_CODE           TYPE /BI0/OICOMP_CODE,
         InfoObject: 0BWAPPLNM Application component.
            BWAPPLNM           TYPE /BI0/OIBWAPPLNM,
         InfoObject: 0MOVETYPE movement Type (Inventory Management).
            MOVETYPE           TYPE /BI0/OIMOVETYPE,
         InfoObject: 0STOCKRELEV BW: Relevance to Stock.
            STOCKRELEV           TYPE /BI0/OISTOCKRELEV,
         InfoObject: 0CPPVLC BW: Purchase Value in Local currency.
            CPPVLC           TYPE /BI0/OICPPVLC,
         InfoObject: 0CPSVLC BW: Sales Value in Local currency.
            CPSVLC           TYPE /BI0/OICPSVLC,
         InfoObject: 0CPSTLC BW: Sales Value in Local currency.
            CPSTLC           TYPE /BI0/OICPSTLC,
         InfoObject: 0CPQUABU BW: Amount in base unit of Measure.
            CPQUABU           TYPE /BI0/OICPQUABU,
         InfoObject: 0VAL_TYPE Valuation Type.
            VAL_TYPE           TYPE /BI0/OIVAL_TYPE,
         InfoObject: 0PROCESSKEY BW: Transaction Key.
            PROCESSKEY           TYPE /BI0/OIPROCESSKEY,
         InfoObject: 0BATCH Batch number.
            BATCH           TYPE /BI0/OIBATCH,
         InfoObject: 0MATMREA Reason for Goods Movement.
            MATMREA           TYPE /BI0/OIMATMREA,
         InfoObject: 0BUS_AREA Business Area.
            BUS_AREA           TYPE /BI0/OIBUS_AREA,
         InfoObject: 0COSTCENTER Cost Center.
            COSTCENTER           TYPE /BI0/OICOSTCENTER,
         InfoObject: 0SOLD_TO Sold-to Party.
            SOLD_TO           TYPE /BI0/OISOLD_TO,
         InfoObject: 0WHSE_NUM Warehouse Number / warehouse complex.
            WHSE_NUM           TYPE /BI0/OIWHSE_NUM,
         InfoObject: 0STOR_LOC Storage Location.
            STOR_LOC           TYPE /BI0/OISTOR_LOC,
         InfoObject: 0STRGE_BIN Storage Bin.
            STRGE_BIN           TYPE /BI0/OISTRGE_BIN,
         InfoObject: 0STRGE_TYPE Storage Type.
            STRGE_TYPE           TYPE /BI0/OISTRGE_TYPE,
         InfoObject: 0VENDOR  Vendor.
            VENDOR           TYPE /BI0/OIVENDOR,
         InfoObject: 0MATERIAL Material.
            MATERIAL           TYPE /BI0/OIMATERIAL,
         InfoObject: 0DOC_NUM BW: Document Number.
            DOC_NUM           TYPE /BI0/OIDOC_NUM,
         InfoObject: 0BASE_UOM Base Unit of Measure.
            BASE_UOM           TYPE /BI0/OIBASE_UOM,
         InfoObject: 0DOC_YEAR BW: Document Year.
            DOC_YEAR           TYPE /BI0/OIDOC_YEAR,
         InfoObject: 0PROFIT_CTR Profit center.
            PROFIT_CTR           TYPE /BI0/OIPROFIT_CTR,
         InfoObject: 0DCINDIC Debit/Credit Indicator.
            DCINDIC           TYPE /BI0/OIDCINDIC,
         InfoObject: 0LOC_CURRCY Local currency.
            LOC_CURRCY           TYPE /BI0/OILOC_CURRCY,
         InfoObject: 0PLANT Plant.
            PLANT           TYPE /BI0/OIPLANT,
         InfoObject: 0FISCVARNT Fiscal year variant.
            FISCVARNT           TYPE /BI0/OIFISCVARNT,
         InfoObject: 0CPNOITEMS BW: Number of activities.
            CPNOITEMS           TYPE /BI0/OICPNOITEMS,
         InfoObject: 0CO_AREA Controlling Area.
            CO_AREA           TYPE /BI0/OICO_AREA,
         InfoObject: 0DOC_ITEM BW: Document Line Number.
            DOC_ITEM           TYPE /BI0/OIDOC_ITEM,
         InfoObject: 0VALUE_LC Amount in local currency.
            VALUE_LC           TYPE /BI0/OIVALUE_LC,
         InfoObject: 0QUANT_B Quantity in base units of Measure.
            QUANT_B           TYPE /BI0/OIQUANT_B,
         InfoObject: 0MOVE_PLANT Receiving Plant/Issuing Plant.
            MOVE_PLANT           TYPE /BI0/OIMOVE_PLANT,
         InfoObject: 0RECORDMODE BW Delta Process: Update Mode.
            RECORDMODE           TYPE RODMUPDMOD,
         InfoObject: 0RT_RMAPIDA RMA Physical Inventory Date.
            RT_RMAPIDA           TYPE /BI0/OIRT_RMAPIDA,
         InfoObject: 0BWCOUNTER Additional Key Field Revaluation Document
    *Record.
            BWCOUNTER           TYPE /BI0/OIBWCOUNTER,
         InfoObject: 0INDSPECSTK Indicator: Valuation of Special stock.
            INDSPECSTK           TYPE /BI0/OIINDSPECSTK,
         InfoObject: 0GN_R3_SSY Source System for  R/3 Entity.
            GN_R3_SSY           TYPE /BI0/OIGN_R3_SSY,
         InfoObject: 0RT_MOVINV movement Type is Physical Inventory.
            RT_MOVINV           TYPE /BI0/OIRT_MOVINV,
         InfoObject: 0RT_MOVADJ movement Type is Stock Adjustment.
            RT_MOVADJ           TYPE /BI0/OIRT_MOVADJ,
         InfoObject: 0RSL_STMAT Structured  Article.
            RSL_STMAT           TYPE /BI0/OIRSL_STMAT,
         InfoObject: 0RT_MOVRET movement Type is Return.
            RT_MOVRET           TYPE /BI0/OIRT_MOVRET,
         InfoObject: 0RSL_STAUTO Automatically Completed Component.
            RSL_STAUTO           TYPE /BI0/OIRSL_STAUTO,
         InfoObject: 0RT_MOVTRAN movement Type is Stock Transfer.
            RT_MOVTRAN           TYPE /BI0/OIRT_MOVTRAN,
         InfoObject: 0RT_MATPOST Transfer Posting from  Article to Article
            RT_MATPOST           TYPE /BI0/OIRT_MATPOST,
         InfoObject: 0RT_SASTSV Share of Business Volume for Set Sales Val
    *ue in Local crcy.
            RT_SASTSV           TYPE /BI0/OIRT_SASTSV,
         InfoObject: 0RT_SASTST Share of Business Volume for Set with Tax
    *in Local currency.
            RT_SASTST           TYPE /BI0/OIRT_SASTST,
         InfoObject: 0COORDER order number.
            COORDER           TYPE /BI0/OICOORDER,
         InfoObject: 0RMA_LNK RMA Stock Transfer Reference Item.
            RMA_LNK           TYPE /BI0/OIRMA_LNK,
         InfoObject: 0RMA_RFLG RMA Relevance Flag.
            RMA_RFLG           TYPE /BI0/OIRMA_RFLG,
         InfoObject: 0RTHFEES Stock Transfer Fees.
            RTHFEES           TYPE /BI0/OIRTHFEES,
         Field: RECORD.
            RECORD           TYPE RSARECORD,
          END   OF tys_SC_1.
        TYPES:
    tyt_SC_1        TYPE STANDARD TABLE OF tys_SC_1
                            WITH NON-UNIQUE DEFAULT KEY.
    $$ begin of global - insert your declaration only below this line  -
    ... "insert your code here
    $$ end of global - insert your declaration only before this line   -
        METHODS
          start_routine
            IMPORTING
              request                  type rsrequest
              datapackid               type rsdatapid
            EXPORTING
              monitor                  type rstr_ty_t_monitors
            CHANGING
              SOURCE_PACKAGE              type tyt_SC_1
            RAISING
              cx_rsrout_abort.
        METHODS
          inverse_start_routine
            IMPORTING
              i_th_fields_outbound         TYPE rstran_t_field_inv
              i_r_selset_outbound          TYPE REF TO cl_rsmds_set
              i_is_main_selection          TYPE rs_bool
              i_r_selset_outbound_complete TYPE REF TO cl_rsmds_set
              i_r_universe_inbound         TYPE REF TO cl_rsmds_universe
            CHANGING
              c_th_fields_inbound          TYPE rstran_t_field_inv
              c_r_selset_inbound           TYPE REF TO cl_rsmds_set
              c_exact                      TYPE rs_bool.
    ENDCLASS.                    "routine DEFINITION
    $$ begin of 2nd part global - insert your code only below this line  *
        TYPES:
          BEGIN OF tys_SC_1_full,
         InfoObject: 0STORNO Stornokennzeichen.
            STORNO           TYPE /BI0/OISTORNO,
         InfoObject: 0RT_PROMO Aktion.
            RT_PROMO           TYPE /BI0/OIRT_PROMO,
         InfoObject: 0VAL_CLASS Bewertungsklasse.
            VAL_CLASS           TYPE /BI0/OIVAL_CLASS,
         InfoObject: 0DOC_DATE Belegdatum.
            DOC_DATE           TYPE /BI0/OIDOC_DATE,
         InfoObject: 0STOCKTYPE Bestandsausprägung.
            STOCKTYPE           TYPE /BI0/OISTOCKTYPE,
         InfoObject: 0STOCKCAT Bestandstypen.
            STOCKCAT           TYPE /BI0/OISTOCKCAT,
         InfoObject: 0PSTNG_DATE Buchungsdatum im Beleg.
            PSTNG_DATE           TYPE /BI0/OIPSTNG_DATE,
         InfoObject: 0COMP_CODE Buchungskreis.
            COMP_CODE           TYPE /BI0/OICOMP_CODE,
         InfoObject: 0BWAPPLNM Anwendungskomponente.
            BWAPPLNM           TYPE /BI0/OIBWAPPLNM,
         InfoObject: 0MOVETYPE Bewegungsart (Bestandsführung).
            MOVETYPE           TYPE /BI0/OIMOVETYPE,
         InfoObject: 0STOCKRELEV BW: Best.Relevanz.
            STOCKRELEV           TYPE /BI0/OISTOCKRELEV,
         InfoObject: 0CPPVLC BW: Einkaufswert in Hauswährung.
            CPPVLC           TYPE /BI0/OICPPVLC,
         InfoObject: 0CPSVLC BW: Verkaufswert in Hauswährung.
            CPSVLC           TYPE /BI0/OICPSVLC,
         InfoObject: 0CPSTLC BW: VerkWmS Hauswährung.
            CPSTLC           TYPE /BI0/OICPSTLC,
         InfoObject: 0CPQUABU BW: Menge in Basismengeneinheit.
            CPQUABU           TYPE /BI0/OICPQUABU,
         InfoObject: 0VAL_TYPE Bewertungsart.
            VAL_TYPE           TYPE /BI0/OIVAL_TYPE,
         InfoObject: 0PROCESSKEY BW:Vorgangsschlüssel.
            PROCESSKEY           TYPE /BI0/OIPROCESSKEY,
         InfoObject: 0BATCH Chargennummer.
            BATCH           TYPE /BI0/OIBATCH,
         InfoObject: 0MATMREA Grund für die Warenbewegung.
            MATMREA           TYPE /BI0/OIMATMREA,
         InfoObject: 0BUS_AREA Geschäftsbereich.
            BUS_AREA           TYPE /BI0/OIBUS_AREA,
         InfoObject: 0COSTCENTER Kostenstelle.
            COSTCENTER           TYPE /BI0/OICOSTCENTER,
         InfoObject: 0SOLD_TO Auftraggeber.
            SOLD_TO           TYPE /BI0/OISOLD_TO,
         InfoObject: 0WHSE_NUM Lagernummer/Lagerkomplex.
            WHSE_NUM           TYPE /BI0/OIWHSE_NUM,
         InfoObject: 0STOR_LOC Lagerort.
            STOR_LOC           TYPE /BI0/OISTOR_LOC,
         InfoObject: 0STRGE_BIN Lagerplatz.
            STRGE_BIN           TYPE /BI0/OISTRGE_BIN,
         InfoObject: 0STRGE_TYPE Lagertyp.
            STRGE_TYPE           TYPE /BI0/OISTRGE_TYPE,
         InfoObject: 0VENDOR Lieferant.
            VENDOR           TYPE /BI0/OIVENDOR,
         InfoObject: 0MATERIAL Material.
            MATERIAL           TYPE /BI0/OIMATERIAL,
         InfoObject: 0DOC_NUM BW: Belegnummer.
            DOC_NUM           TYPE /BI0/OIDOC_NUM,
         InfoObject: 0BASE_UOM Basismengeneinheit.
            BASE_UOM           TYPE /BI0/OIBASE_UOM,
         InfoObject: 0DOC_YEAR BW: Belegjahr.
            DOC_YEAR           TYPE /BI0/OIDOC_YEAR,
         InfoObject: 0PROFIT_CTR Profit Center.
            PROFIT_CTR           TYPE /BI0/OIPROFIT_CTR,
         InfoObject: 0DCINDIC Soll-/Haben-Kennzeichen.
            DCINDIC           TYPE /BI0/OIDCINDIC,
         InfoObject: 0LOC_CURRCY Hauswährung.
            LOC_CURRCY           TYPE /BI0/OILOC_CURRCY,
         InfoObject: 0PLANT Werk.
            PLANT           TYPE /BI0/OIPLANT,
         InfoObject: 0FISCVARNT Geschäftsjahresvariante.
            FISCVARNT           TYPE /BI0/OIFISCVARNT,
         InfoObject: 0CPNOITEMS BW: Anzahl Vorgänge.
            CPNOITEMS           TYPE /BI0/OICPNOITEMS,
         InfoObject: 0CO_AREA Kostenrechnungskreis.
            CO_AREA           TYPE /BI0/OICO_AREA,
         InfoObject: 0DOC_ITEM BW: Belegpositionsnummer.
            DOC_ITEM           TYPE /BI0/OIDOC_ITEM,
         InfoObject: 0VALUE_LC Betrag in Hauswährung.
            VALUE_LC           TYPE /BI0/OIVALUE_LC,
         InfoObject: 0COORDER Auftragsnummer.
            COORDER           TYPE /BI0/OICOORDER,
         InfoObject: 0QUANT_B Menge in Basismengeneinheiten.
            QUANT_B           TYPE /BI0/OIQUANT_B,
         InfoObject: 0MOVE_PLANT Empfangendes/Abgebendes Werk.
            MOVE_PLANT           TYPE /BI0/OIMOVE_PLANT,
         InfoObject: 0RECORDMODE BW Deltaverfahren: Update Modus.
            RECORDMODE           TYPE RODMUPDMOD,
         InfoObject: 0RT_RMAPIDA RMA Inventurdatum.
            RT_RMAPIDA           TYPE /BI0/OIRT_RMAPIDA,
         InfoObject: 0BWCOUNTER Zusätzliches Schlüsselfeld Umbewertungsbel
    *egsatz.
            BWCOUNTER           TYPE /BI0/OIBWCOUNTER,
         InfoObject: 0INDSPECSTK Kennzeichen Bewertung Sonderbestand.
            INDSPECSTK           TYPE /BI0/OIINDSPECSTK,
         InfoObject: 0GN_R3_SSY Quellsystem der R/3 Entität.
            GN_R3_SSY           TYPE /BI0/OIGN_R3_SSY,
         InfoObject: 0RT_MOVINV Bewegungsart ist Inventur.
            RT_MOVINV           TYPE /BI0/OIRT_MOVINV,
         InfoObject: 0RT_MOVADJ Bewegungsart ist Bestandskorrektur.
            RT_MOVADJ           TYPE /BI0/OIRT_MOVADJ,
         InfoObject: 0RSL_STMAT Strukturierter Artikel.
            RSL_STMAT           TYPE /BI0/OIRSL_STMAT,
         InfoObject: 0RT_MOVRET Bewegungsart ist Retoure.
            RT_MOVRET           TYPE /BI0/OIRT_MOVRET,
         InfoObject: 0RSL_STAUTO Automatisch ergänzte Komponente.
            RSL_STAUTO           TYPE /BI0/OIRSL_STAUTO,
         InfoObject: 0RT_MOVTRAN Bewegungsart ist Umlagerung.
            RT_MOVTRAN           TYPE /BI0/OIRT_MOVTRAN,
         InfoObject: 0RT_MATPOST Umbuchung Artikel an Artikel.
            RT_MATPOST           TYPE /BI0/OIRT_MATPOST,
         InfoObject: 0RT_SASTSV Umsatzanteil am Set Verkaufswert in Hauswä
    *hrung.
            RT_SASTSV           TYPE /BI0/OIRT_SASTSV,
         InfoObject: 0RT_SASTST Umsatzanteil am Set Verkaufswert mit Steue
    *r in Hauswährung.
            RT_SASTST           TYPE /BI0/OIRT_SASTST,
         Field: RECORD.
            RECORD           TYPE RSARECORD,      END   OF tys_SC_1_full.
        TYPES:
    tyt_SC_1_full        TYPE STANDARD TABLE OF tys_SC_1_full
                            WITH NON-UNIQUE DEFAULT KEY.
        TYPES:
          BEGIN OF tys_TG_1_full,
         InfoObject: 0CHNGID Änderungslauf ID.
            CHNGID           TYPE /BI0/OICHNGID,
         InfoObject: 0RECORDTP Satztyp.
            RECORDTP           TYPE /BI0/OIRECORDTP,
         InfoObject: 0REQUID Request ID.
            REQUID           TYPE /BI0/OIREQUID,
         InfoObject: 0CALDAY Kalendertag.
            CALDAY           TYPE /BI0/OICALDAY,
         InfoObject: 0CALMONTH Kalenderjahr / Monat.
            CALMONTH           TYPE /BI0/OICALMONTH,
         InfoObject: 0CALWEEK Kalenderjahr / Woche.
            CALWEEK           TYPE /BI0/OICALWEEK,
         InfoObject: 0CALYEAR Kalenderjahr.
            CALYEAR           TYPE /BI0/OICALYEAR,
         InfoObject: 0MATERIAL Material.
            MATERIAL           TYPE /BI0/OIMATERIAL,
         InfoObject: 0PLANT Werk.
            PLANT           TYPE /BI0/OIPLANT,
         InfoObject: 0STOR_LOC Lagerort.
            STOR_LOC           TYPE /BI0/OISTOR_LOC,
         InfoObject: 0BATCH Chargennummer.
            BATCH           TYPE /BI0/OIBATCH,
         InfoObject: 0STOCKTYPE Bestandsausprägung.
            STOCKTYPE           TYPE /BI0/OISTOCKTYPE,
         InfoObject: 0STOCKCAT Bestandstypen.
            STOCKCAT           TYPE /BI0/OISTOCKCAT,
         InfoObject: 0GN_VENDOR Lieferant.
            GN_VENDOR           TYPE /BI0/OIGN_VENDOR,
         InfoObject: 0RECVS_VAL Zugangswert Bewerteter Bestand.
            RECVS_VAL           TYPE /BI0/OIRECVS_VAL,
         InfoObject: 0ISSVS_VAL Abgangswert Bewerteter Bestand.
            ISSVS_VAL           TYPE /BI0/OIISSVS_VAL,
         InfoObject: 0ISSBLOSTCK Abgangsmenge Gesperrter Bestand.
            ISSBLOSTCK           TYPE /BI0/OIISSBLOSTCK,
         InfoObject: 0ISSCNSSTCK Abgangsmenge Konsignationsbestand.
            ISSCNSSTCK           TYPE /BI0/OIISSCNSSTCK,
         InfoObject: 0ISSQMSTCK Abgangsmenge Qualitätsbestand.
            ISSQMSTCK           TYPE /BI0/OIISSQMSTCK,
         InfoObject: 0ISSTRANSST Abgangsmenge Transitbestand.
            ISSTRANSST           TYPE /BI0/OIISSTRANSST,
         InfoObject: 0RECBLOSTCK Zugangsmenge Gesperrter Bestand.
            RECBLOSTCK           TYPE /BI0/OIRECBLOSTCK,
         InfoObject: 0RECCNSSTCK Zugangsmenge Konsignationsbestand.
            RECCNSSTCK           TYPE /BI0/OIRECCNSSTCK,
         InfoObject: 0RECQMSTCK Zugangsmenge Qualitätsbestand.
            RECQMSTCK           TYPE /BI0/OIRECQMSTCK,
         InfoObject: 0RECTRANSST Zugangsmenge Transitbestand.
            RECTRANSST           TYPE /BI0/OIRECTRANSST,
         InfoObject: 0ISSSCRP Abgangsmenge Ausschuss.
            ISSSCRP           TYPE /BI0/OIISSSCRP,
         InfoObject: 0ISSVALSCRP Abgangswert Ausschuss.
            ISSVALSCRP           TYPE /BI0/OIISSVALSCRP,
         InfoObject: 0RECTOTSTCK Zugangsmenge Gesamt Bestand.
            RECTOTSTCK           TYPE /BI0/OIRECTOTSTCK,
         InfoObject: 0ISSTOTSTCK Abgangsmenge Gesamtbestand.
            ISSTOTSTCK           TYPE /BI0/OIISSTOTSTCK,
         InfoObject: 0ISSVALSTCK Abgangsmenge Bewerteter Bestand.
            ISSVALSTCK           TYPE /BI0/OIISSVALSTCK,
         InfoObject: 0RECVALSTCK Zugangsmenge Bewerteter Bestand.
            RECVALSTCK           TYPE /BI0/OIRECVALSTCK,
         InfoObject: 0VENCONCON Verbrauchswerte Lieferantenkonsignationsbe
    *stand.
            VENCONCON           TYPE /BI0/OIVENCONCON,
         InfoObject: 0LOC_CURRCY Hauswährung.
            LOC_CURRCY           TYPE /BI0/OILOC_CURRCY,
         InfoObject: 0BASE_UOM Basismengeneinheit.
            BASE_UOM           TYPE /BI0/OIBASE_UOM,
         Field: RECORD Nummer des Datensatzes.
            RECORD           TYPE RSARECORD,
          END   OF tys_TG_1_full.
        TYPES:
          BEGIN OF tys_SC_1__RULE_9,
         InfoObject: 0BWAPPLNM Anwendungskomponente.
            BWAPPLNM           TYPE /BI0/OIBWAPPLNM,
         InfoObject: 0CPQUABU BW: Menge in Basismengeneinheit.
            CPQUABU           TYPE /BI0/OICPQUABU,
         InfoObject: 0PROCESSKEY BW:Vorgangsschlüssel.
            PROCESSKEY           TYPE /BI0/OIPROCESSKEY,
         InfoObject: 0STOCKCAT Bestandstypen.
            STOCKCAT           TYPE /BI0/OISTOCKCAT,
         InfoObject: 0STOCKRELEV BW: Best.Relevanz.
            STOCKRELEV           TYPE /BI0/OISTOCKRELEV,
         InfoObject: 0STOCKTYPE Bestandsausprägung.
            STOCKTYPE           TYPE /BI0/OISTOCKTYPE,
         InfoObject: 0BASE_UOM Basismengeneinheit.
            BASE_UOM           TYPE /BI0/OIBASE_UOM,
          END   OF tys_SC_1__RULE_9.
        TYPES:
          BEGIN OF tys_SC_1__RULE_10,
         InfoObject: 0BWAPPLNM Anwendungskomponente.
            BWAPPLNM           TYPE /BI0/OIBWAPPLNM,
         InfoObject: 0CPQUABU BW: Menge in Basismengeneinheit.
            CPQUABU           TYPE /BI0/OICPQUABU,
         InfoObject: 0PROCESSKEY BW:Vorgangsschlüssel.
            PROCESSKEY           TYPE /BI0/OIPROCESSKEY,
         InfoObject: 0STOCKCAT Bestandstypen.
            STOCKCAT           TYPE /BI0/OISTOCKCAT,
         InfoObject: 0STOCKRELEV BW: Best.Relevanz.
            STOCKRELEV           TYPE /BI0/OISTOCKRELEV,
         InfoObject: 0STOCKTYPE Bestandsausprägung.
            STOCKTYPE           TYPE /BI0/OISTOCKTYPE,
         InfoObject: 0BASE_UOM Basismengeneinheit.
            BASE_UOM           TYPE /BI0/OIBASE_UOM,
          END   OF tys_SC_1__RULE_10.
        TYPES:
          BEGIN OF tys_SC_1__RULE_11,
         InfoObject: 0GN_R3_SSY Quellsystem der R/3 Entität.
            GN_R3_SSY           TYPE /BI0/OIGN_R3_SSY,
         InfoObject: 0STOCKCAT Bestandstypen.
            STOCKCAT           TYPE /BI0/OISTOCKCAT,
         InfoObject: 0VENDOR Lieferant.
            VENDOR           TYPE /BI0/OIVENDOR,
          END   OF tys_SC_1__RULE_11.
        TYPES:
          BEGIN OF tys_SC_1__RULE_12,
         InfoObject: 0BWAPPLNM Anwendungskomponente.
            BWAPPLNM           TYPE /BI0/OIBWAPPLNM,
         InfoObject: 0CPPVLC BW: Einkaufswert in Hauswährung.
            CPPVLC           TYPE /BI0/OICPPVLC,
         InfoObject: 0INDSPECSTK Kennzeichen Bewertung Sonderbestand.
            INDSPECSTK           TYPE /BI0/OIINDSPECSTK,
         InfoObject: 0PROCESSKEY BW:Vorgangsschlüssel.
            PROCESSKEY           TYPE /BI0/OIPROCESSKEY,
         InfoObject: 0STOCKCAT Bestandstypen.
            STOCKCAT           TYPE /BI0/OISTOCKCAT,
         InfoObject: 0STOCKRELEV BW: Best.Relevanz.
            STOCKRELEV           TYPE /BI0/OISTOCKRELEV,
         InfoObject: 0LOC_CURRCY Hauswährung.
            LOC_CURRCY           TYPE /BI0/OILOC_CURRCY,
          END   OF tys_SC_1__RULE_12.
        TYPES:
          BEGIN OF tys_SC_1__RULE_13,
         InfoObject: 0BWAPPLNM Anwendungskomponente.
            BWAPPLNM           TYPE /BI0/OIBWAPPLNM,
         InfoObject: 0CPPVLC BW: Einkaufswert in Hauswährung.
            CPPVLC           TYPE /BI0/OICPPVLC,
         InfoObject: 0INDSPECSTK Kennzeichen Bewertung Sonderbestand.
            INDSPECSTK           TYPE /BI0/OIINDSPECSTK,
         InfoObject: 0PROCESSKEY BW:Vorgangsschlüssel.
            PROCESSKEY           TYPE /BI0/OIPROCESSKEY,
         InfoObject: 0STOCKCAT Bestandstypen.
            STOCKCAT           TYPE /BI0/OISTOCKCAT,
         InfoObject: 0STOCKRELEV BW: Best.Relevanz.
            STOCKRELEV           TYPE /BI0/OISTOCKRELEV,
         InfoObject: 0LOC_CURRCY Hauswährung.
            LOC_CURRCY           TYPE /BI0/OILOC_CURRCY,
          END   OF tys_SC_1__RULE_13.
        TYPES:
          BEGIN OF tys_SC_1__RULE_15,
         InfoObject: 0GN_R3_SSY Quellsystem der R/3 Entität.
            GN_R3_SSY           TYPE /BI0/OIGN_R3_SSY,
         InfoObject: 0STOCKCAT Bestandstypen.
            STOCKCAT           TYPE /BI0/OISTOCKCAT,
         InfoObject: 0STOCKTYPE Bestandsausprägung.
            STOCKTYPE           TYPE /BI0/OISTOCKTYPE,
         InfoObject: 0VENDOR Lieferant.
            VENDOR           TYPE /BI0/OIVENDOR,
          END   OF tys_SC_1__RULE_15.
        TYPES:
          BEGIN OF tys_SC_1__RULE_19,
         InfoObject: 0BWAPPLNM Anwendungskomponente.
            BWAPPLNM           TYPE /BI0/OIBWAPPLNM,
         InfoObject: 0CPQUABU BW: Menge in Basismengeneinheit.
            CPQUABU           TYPE /BI0/OICPQUABU,
         InfoObject: 0PROCESSKEY BW:Vorgangsschlüssel.
            PROCESSKEY           TYPE /BI0/OIPROCESSKEY,
         InfoObject: 0STOCKRELEV BW: Best.Relevanz.
            STOCKRELEV           TYPE /BI0/OISTOCKRELEV,
         InfoObject: 0BASE_UOM Basismengeneinheit.
            BASE_UOM           TYPE /BI0/OIBASE_UOM,
          END   OF tys_SC_1__RULE_19.
        TYPES:
          BEGIN OF tys_SC_1__RULE_20,
         InfoObject: 0BWAPPLNM Anwendungskomponente.
            BWAPPLNM           TYPE /BI0/OIBWAPPLNM,
         InfoObject: 0CPQUABU BW: Menge in Basismengeneinheit.
            CPQUABU           TYPE /BI0/OICPQUABU,
         InfoObject: 0PROCESSKEY BW:Vorgangsschlüssel.
            PROCESSKEY           TYPE /BI0/OIPROCESSKEY,
         InfoObject: 0STOCKRELEV BW: Best.Relevanz.
            STOCKRELEV           TYPE /BI0/OISTOCKRELEV,
         InfoObject: 0BASE_UOM Basismengeneinheit.
            BASE_UOM           TYPE /BI0/OIBASE_UOM,
          END   OF tys_SC_1__RULE_20.
        TYPES:
          BEGIN OF tys_SC_1__RULE_21,
         InfoObject: 0BWAPPLNM Anwendungskomponente.
            BWAPPLNM           TYPE /BI0/OIBWAPPLNM,
         InfoObject: 0CPQUABU BW: Menge in Basismengeneinheit.
            CPQUABU           TYPE /BI0/OICPQUABU,
         InfoObject: 0INDSPECSTK Kennzeichen Bewertung Sonderbestand.
            INDSPECSTK           TYPE /BI0/OIINDSPECSTK,
         InfoObject: 0PROCESSKEY BW:Vorgangsschlüssel.
            PROCESSKEY           TYPE /BI0/OIPROCESSKEY,
         InfoObject: 0STOCKCAT Bestandstypen.
            STOCKCAT           TYPE /BI0/OISTOCKCAT,
         InfoObject: 0STOCKRELEV BW: Best.Relevanz.
            STOCKRELEV           TYPE /BI0/OISTOCKRELEV,
         InfoObject: 0BASE_UOM Basismengeneinheit.
            BASE_UOM           TYPE /BI0/OIBASE_UOM,
          END   OF tys_SC_1__RULE_21.
        TYPES:
          BEGIN OF tys_SC_1__RULE_22,
         InfoObject: 0BWAPPLNM Anwendungskomponente.
            BWAPPLNM           TYPE /BI0/OIBWAPPLNM,
         InfoObject: 0CPQUABU BW: Menge in Basismengeneinheit.
            CPQUABU           TYPE /BI0/OICPQUABU,
         InfoObject: 0INDSPECSTK Kennzeichen Bewertung Sonderbestand.
            INDSPECSTK           TYPE /BI0/OIINDSPECSTK,
         InfoObject: 0PROCESSKEY BW:Vorgangsschlüssel.
            PROCESSKEY           TYPE /BI0/OIPROCESSKEY,
         InfoObject: 0STOCKCAT Bestandstypen.
            STOCKCAT           TYPE /BI0/OISTOCKCAT,
         InfoObject: 0STOCKRELEV BW: Best.Relevanz.
            STOCKRELEV           TYPE /BI0/OISTOCKRELEV,
         InfoObject: 0BASE_UOM Basismengeneinheit.
            BASE_UOM           TYPE /BI0/OIBASE_UOM,
          END   OF tys_SC_1__RULE_22.
        TYPES:
          BEGIN OF tys_SC_1__RULE_25,
         InfoObject: 0GN_R3_SSY Quellsystem der R/3 Entität.
            GN_R3_SSY           TYPE /BI0/OIGN_R3_SSY,
         InfoObject: 0STOCKCAT Bestandstypen.
            STOCKCAT           TYPE /BI0/OISTOCKCAT,
         InfoObject: 0STOCKTYPE Bestandsausprägung.
            STOCKTYPE           TYPE /BI0/OISTOCKTYPE,
         InfoObject: 0VENDOR Lieferant.
            VENDOR           TYPE /BI0/OIVENDOR,
          END   OF tys_SC_1__RULE_25.
        TYPES:
          BEGIN OF tys_SC_1__RULE_31,
         InfoObject: 0BWAPPLNM Anwendungskomponente.
            BWAPPLNM           TYPE /BI0/OIBWAPPLNM,
         InfoObject: 0CPPVLC BW: Einkaufswert in Hauswährung.
            CPPVLC           TYPE /BI0/OICPPVLC,
         InfoObject: 0PROCESSKEY BW:Vorgangsschlüssel.
            PROCESSKEY           TYPE /BI0/OIPROCESSKEY,
         InfoObject: 0STOCKCAT Bestandstypen.
            STOCKCAT           TYPE /BI0/OISTOCKCAT,
         InfoObject: 0STOCKRELEV BW: Best.Relevanz.
            STOCKRELEV           TYPE /BI0/OISTOCKRELEV,
         InfoObject: 0LOC_CURRCY Hauswährung.
            LOC_CURRCY           TYPE /BI0/OILOC_CURRCY,
          END   OF tys_SC_1__RULE_31.
        TYPES:
          BEGIN OF tys_SC_1__RULE_37,
         InfoObject: 0BWAPPLNM Anwendungskomponente.
            BWAPPLNM           TYPE /BI0/OIBWAPPLNM,
         InfoObject: 0CPQUABU BW: Menge in Basismengeneinheit.
            CPQUABU           TYPE /BI0/OICPQUABU,
         InfoObject: 0PROCESSKEY BW:Vorgangsschlüssel.
            PROCESSKEY           TYPE /BI0/OIPROCESSKEY,
         InfoObject: 0STOCKCAT Bestandstypen.
            STOCKCAT           TYPE /BI0/OISTOCKCAT,
         InfoObject: 0STOCKRELEV BW: Best.Relevanz.
            STOCKRELEV           TYPE /BI0/OISTOCKRELEV,
         InfoObject: 0STOCKTYPE Bestandsausprägung.
            STOCKTYPE           TYPE /BI0/OISTOCKTYPE,
         InfoObject: 0BASE_UOM Basismengeneinheit.
            BASE_UOM           TYPE /BI0/OIBASE_UOM,
          END   OF tys_SC_1__RULE_37.
        TYPES:
          BEGIN OF tys_SC_1__RULE_38,
         InfoObject: 0BWAPPLNM Anwendungskomponente.
            BWAPPLNM           TYPE /BI0/OIBWAPPLNM,
         InfoObject: 0CPQUABU BW: Menge in Basismengeneinheit.
            CPQUABU           TYPE /BI0/OICPQUABU,
         InfoObject: 0PROCESSKEY BW:Vorgangsschlüssel.
            PROCESSKEY           TYPE /BI0/OIPROCESSKEY,
         InfoObject: 0STOCKCAT Bestandstypen.
            STOCKCAT           TYPE /BI0/OISTOCKCAT,
         InfoObject: 0STOCKRELEV BW: Best.Relevanz.
            STOCKRELEV           TYPE /BI0/OISTOCKRELEV,
         InfoObject: 0STOCKTYPE Bestandsausprägung.
            STOCKTYPE           TYPE /BI0/OISTOCKTYPE,
         InfoObject: 0BASE_UOM Basismengeneinheit.
            BASE_UOM           TYPE /BI0/OIBASE_UOM,
          END   OF tys_SC_1__RULE_38.
        TYPES:
          BEGIN OF tys_SC_1__RULE_39,
         InfoObject: 0BWAPPLNM Anwendungskomponente.
            BWAPPLNM           TYPE /BI0/OIBWAPPLNM,
         InfoObject: 0CPQUABU BW: Menge in Basismengeneinheit.
            CPQUABU           TYPE /BI0/OICPQUABU,
         InfoObject: 0PROCESSKEY BW:Vorgangsschlüssel.
            PROCESSKEY           TYPE /BI0/OIPROCESSKEY,
         InfoObject: 0STOCKRELEV BW: Best.Relevanz.
            STOCKRELEV           TYPE /BI0/OISTOCKRELEV,
         InfoObject: 0STOCKTYPE Bestandsausprägung.
            STOCKTYPE           TYPE /BI0/OISTOCKTYPE,
         InfoObject: 0BASE_UOM Basismengeneinheit.
            BASE_UOM           TYPE /BI0/OIBASE_UOM,
          END   OF tys_SC_1__RULE_39.
        TYPES:
          BEGIN OF tys_SC_1__RULE_40,
         InfoObject: 0BWAPPLNM Anwendungskomponente.
            BWAPPLNM           TYPE /BI0/OIBWAPPLNM,
         InfoObject: 0CPQUABU BW: Menge in Basismengeneinheit.
            CPQUABU           TYPE /BI0/OICPQUABU,
         InfoObject: 0PROCESSKEY BW:Vorgangsschlüssel.
            PROCESSKEY           TYPE /BI0/OIPROCESSKEY,
         InfoObject: 0STOCKCAT Bestandstypen.
            STOCKCAT           TYPE /BI0/OISTOCKCAT,
         InfoObject: 0STOCKRELEV BW: Best.Relevanz.
            STOCKRELEV           TYPE /BI0/OISTOCKRELEV,
         InfoObject: 0STOCKTYPE Bestandsausprägung.
            STOCKTYPE           TYPE /BI0/OISTOCKTYPE,
         InfoObject: 0BASE_UOM Basismengeneinheit.
            BASE_UOM           TYPE /BI0/OIBASE_UOM,
          END   OF tys_SC_1__RULE_40.
        TYPES:
          BEGIN OF tys_SC_1__RULE_41,
         InfoObject: 0BWAPPLNM Anwendungskomponente.
            BWAPPLNM           TYPE /BI0/OIBWAPPLNM,
         InfoObject: 0CPQUABU BW: Menge in Basismengeneinheit.
            CPQUABU           TYPE /BI0/OICPQUABU,
         InfoObject: 0PROCESSKEY BW:Vorgangsschlüssel.
            PROCESSKEY           TYPE /BI0/OIPROCESSKEY,
         InfoObject: 0STOCKCAT Bestandstypen.
            STOCKCAT           TYPE /BI0/OISTOCKCAT,
         InfoObject: 0STOCKRELEV BW: Best.Relevanz.
            STOCKRELEV           TYPE /BI0/OISTOCKRELEV,
         InfoObject: 0STOCKTYPE Bestandsausprägung.
            STOCKTYPE           TYPE /BI0/OISTOCKTYPE,
         InfoObject: 0BASE_UOM Basismengeneinheit.
            BASE_UOM           TYPE /BI0/OIBASE_UOM,
          END   OF tys_SC_1__RULE_41.
        TYPES:
          BEGIN OF tys_SC_1__RULE_42,
         InfoObject: 0BWAPPLNM Anwendungskomponente.
            BWAPPLNM           TYPE /BI0/OIBWAPPLNM,
         InfoObject: 0CPQUABU BW: Menge in Basismengeneinheit.
            CPQUABU           TYPE /BI0/OICPQUABU,
         InfoObject: 0PROCESSKEY BW:Vorgangsschlüssel.
            PROCESSKEY           TYPE /BI0/OIPROCESSKEY,
         InfoObject: 0STOCKRELEV BW: Best.Relevanz.
            STOCKRELEV           TYPE /BI0/OISTOCKRELEV,
         InfoObject: 0STOCKTYPE Bestandsausprägung.
            STOCKTYPE           TYPE /BI0/OISTOCKTYPE,
         InfoObject: 0BASE_UOM Basismengeneinheit.
            BASE_UOM           TYPE /BI0/OIBASE_UOM,
          END   OF tys_SC_1__RULE_42.
        TYPES:
          BEGIN OF tys_SC_1__RULE_43,
         InfoObject: 0BWAPPLNM Anwendungskomponente.
            BWAPPLNM           TYPE /BI0/OIBWAPPLNM,
         InfoObject: 0CPQUABU BW: Menge in Basismengeneinheit.
            CPQUABU           TYPE /BI0/OICPQUABU,
         InfoObject: 0MOVETYPE Bewegungsart (Bestandsführung).
            MOVETYPE           TYPE /BI0/OIMOVETYPE,
         InfoObject: 0BASE_UOM Basismengeneinheit.
            BASE_UOM           TYPE /BI0/OIBASE_UOM,
          END   OF tys_SC_1__RULE_43.
        TYPES:
          BEGIN OF tys_SC_1__RULE_51,
         InfoObject: 0BWAPPLNM Anwendungskomponente.
            BWAPPLNM           TYPE /BI0/OIBWAPPLNM,
         InfoObject: 0CPPVLC BW: Einkaufswert in Hauswährung.
            CPPVLC           TYPE /BI0/OICPPVLC,
         InfoObject: 0MOVETYPE Bewegungsart (Bestandsführung).
            MOVETYPE           TYPE /BI0/OIMOVETYPE,
         InfoObject: 0LOC_CURRCY Hauswährung.
            LOC_CURRCY           TYPE /BI0/OILOC_CURRCY,
          END   OF tys_SC_1__RULE_51.
    Additional types for start routine interface
      TYPES:
        data_package_structure type tys_SC_1_full.
    Additional declaration for update rule interface
      DATA:
        MONITOR       type standard table of rsmonitor  WITH HEADER LINE,
        MONITOR_RECNO type standard table of rsmonitors WITH HEADER LINE,
        RECORD_NO     LIKE SY-TABIX,
        RECORD_ALL    LIKE SY-TABIX,
        SOURCE_SYSTEM LIKE RSUPDSIMULH-LOGSYS.
    global definitions from update rules
    INCLUDE rsbctgn_top.
    INCLUDE rsbctgn_update_rules.
    FORM routine_9998
      TABLES DATA_PACKAGE TYPE tyt_SC_1_full
      CHANGING
        ABORT          LIKE sy-subrc
      RAISING
        cx_sy_arithmetic_error
        cx_sy_conversion_error.
    init variables
    fill the internal table "MONITOR", to make monitor entries
    see OSS note 571669
      LOOP AT DATA_PACKAGE.
        IF DATA_PACKAGE-stockcat EQ 'V' OR
           DATA_PACKAGE-stocktype EQ 'V'.
          DELETE DATA_PACKAGE.
        ENDIF.
      ENDLOOP.
    if abort is not equal zero, the update process will be canceled
      ABORT = 0.
    ENDFORM.                    "routine_9998
    FORM routine_0012
      USING
        COMM_STRUCTURE type tys_SC_1__RULE_9
      CHANGING
        RESULT         TYPE tys_TG_1_full-ISSCNSSTCK
        RETURNCODE     LIKE sy-subrc
        ABORT          LIKE sy-subrc
      RAISING
        cx_sy_arithmetic_error
        cx_sy_conversion_error.
    init variables
    fill the internal table "MONITOR", to make monitor entries
    only goods issue is considered
      IF ( COMM_STRUCTURE-processkey EQ '100'   "Other Issues
        OR COMM_STRUCTURE-processkey EQ '101'   "Returns / Vendor
        OR COMM_STRUCTURE-processkey EQ '104'   "Material Transfer
        OR COMM_STRUCTURE-processkey EQ '105'   "Stock Adjustment InvD
        OR COMM_STRUCTURE-processkey EQ '106'   "Stock Adjustment Other
        OR COMM_STRUCTURE-processkey EQ '110' ) "Issue from Stock Transfer
       AND COMM_STRUCTURE-bwapplnm EQ 'MM'
    only movements which are relevant for stock control
       AND COMM_STRUCTURE-stockrelev EQ '1'
       AND COMM_STRUCTURE-cpquabu <> 0.
    only consignment stock is considered
        CASE COMM_STRUCTURE-stockcat.
          WHEN 'K'.
            RESULT = COMM_STRUCTURE-cpquabu.
            RETURNCODE = 0.
          WHEN space.
            IF COMM_STRUCTURE-stocktype CA 'KLM'.
              RESULT = COMM_STRUCTURE-cpquabu.
              RETURNCODE = 0.
            ELSE.
              RETURNCODE = 4.
            ENDIF.
          WHEN OTHERS.
            RETURNCODE = 4.
        ENDCASE.
      ELSE.
    if the returncode is not equal zero, the result will not be updated
        RETURNCODE = 4.
      ENDIF.
    if abort is not equal zero, the update process will be canceled
      ABORT = 0.
    ENDFORM.                    "routine_0012
    FORM routine_0014
      USING
        COMM_STRUCTURE type tys_SC_1__RULE_10
      CHANGING
        RESULT         TYPE tys_TG_1_full-RECCNSSTCK
        RETURNCODE     LIKE sy-subrc
        ABORT          LIKE sy-subrc
      RAISING
        cx_sy_arithmetic_error
        cx_sy_conversion_error.
    init variables
    fill the internal table "MONITOR", to make monitor entries
    only goods receipt is considered
      IF ( COMM_STRUCTURE-processkey EQ '000'   "Other Receipts
        OR COMM_STRUCTURE-processkey EQ '001'   "Goods Receipt / Vendor
        OR COMM_STRUCTURE-processkey EQ '004'   "Material Transfer
        OR COMM_STRUCTURE-processkey EQ '005'   "Stock Adjustment InvD
        OR COMM_STRUCTURE-processkey EQ '006'   "Stock Adjustment Other
        OR COMM_STRUCTURE-processkey EQ '010' ) "Receipt from Stock Transfer
       AND COMM_STRUCTURE-bwapplnm EQ 'MM'
    only movements which are relevant for stock control
       AND COMM_STRUCTURE-stockrelev EQ '1'
       AND COMM_STRUCTURE-cpquabu <> 0.
    only consignment stock is considered
        CASE COMM_STRUCTURE-stockcat.
          WHEN 'K'.
            RESULT = COMM_STRUCTURE-cpquabu.
            RETURNCODE = 0.
          WHEN space.
            IF COMM_STRUCTURE-stocktype CA 'KLM'.
              RESULT = COMM_STRUCTURE-cpquabu.
              RETURNCODE = 0.
            ELSE.
              RETURNCODE = 4.
            ENDIF.
          WHEN OTHERS.
            RETURNCODE = 4.
        ENDCASE.
      ELSE.
    if the returncode is not equal zero, the result will not be updated
        RETURNCODE = 4.
      ENDIF.
    if abort is not equal zero, the update process will be canceled
      ABORT = 0.
    ENDFORM.                    "routine_0014
    FORM routine_0041
      USING
        COMM_STRUCTURE type tys_SC_1__RULE_11
      CHANGING
        RESULT         TYPE tys_TG_1_full-GN_VENDOR
        RETURNCODE     LIKE sy-subrc
        ABORT          LIKE sy-subrc
      RAISING
        cx_sy_arithmetic_error
        cx_sy_conversion_error.
    init variables
    fill the internal table "MONITOR", to make monitor entries
    ... determine consolidated key
      IF COMM_STRUCTURE-stockcat EQ 'K'.
        PERFORM  gn_get_global_key TABLES MONITOR
                              USING    COMM_STRUCTURE-gn_r3_ssy
                                       g_c_bwbeoty_r3vendor
                                       COMM_STRUCTURE-vendor
                                       RECORD_NO
                                       RECORD_ALL
                              CHANGING RESULT
                                       ABORT.
    if the returncode is not equal zero, the result will not be updated
      Endif.
      RETURNCODE = 0.
    ENDFORM.                    "routine_0041
    FORM routine_0010
      USING
        COMM_STRUCTURE type tys_SC_1__RULE_12
      CHANGING
        RESULT         TYPE tys_TG_1_full-ISSVS_VAL
        RETURNCODE     LIKE sy-subrc
        ABORT          LIKE sy-subrc
      RAISING
        cx_sy_arithmetic_error
        cx_sy_conversion_error.
    init variables
    fill the internal table "MONITOR", to make monitor entries
    only goods issue is considered
      IF ( COMM_STRUCTURE-processkey EQ '100'   "Other Issues
        OR COMM_STRUCTURE-processkey EQ '101'   "Returns / Vendor
        OR COMM_STRUCTURE-processkey EQ '104'   "Material Transfer
        OR COMM_STRUCTURE-processkey EQ '105'   "Stock Adjustment InvD
        OR COMM_STRUCTURE-processkey EQ '106

  • Syntax Error in Routine while Activating Transformation

    Dear All,
    I am activating whole scenario for 0SD_C03. we have made transformation for 2lis_11_vaitm, during installation we get below errors:
    - Rule (target: 0SUBTOT_1S, group: 01 Standard Group): Syntax error in routine
    -Rule (target: 0NET_VAL_S, group: 01 Standard Group): Syntax error in routine
    -Rule (target: 0PROD_CATEG, group: 01 Standard Group): Syntax error in routine
    I really appreciate your any input for this.
    Thanks & Regards,
    Darshan

    Hi,
    I hope there is inbalance in between SOURCE Datapackage and Target Datapackage. So in the start routines pls check it and it not found then add in DATA_PACKAGE...
    Check with ABAPer
    under ,
    TYPES:
          BEGIN OF tys_TG_1_full,
            SUBTOT_1S           TYPE /BI0/OISUBTOT_1S,
    and also you can fin dsimilar kind of threads in SDN.
    Re: Syntax Error in Routine while Activating Transformation
    Re: Issue while creating Transformation from Update rule.
    Re: 0IC_C03 activation of Transformation rule ends with ERROR
    Re: Error in activation of transformation
    Thanks
    Reddy

  • DSO Activation Error - While Installing BI Content

    HI Friend,
        First, I deleted one sap  source systems  for BW1 ( My bw1 server BI is : BW1CLNT100 ), later ,I create the same sap source system, But active  0FIAP_O03 ods,
    had error:
    DataSource 80FIAP_O03 does not exist in source system BW1CLNT100 of version A     
    Error when creating the export DataSource and dependent Objects     
    Error when activating DataStore Object 0FIAP_O03
    I go to BW1CLNT100  datasoucres ,I not finded 80FIAP_O03  datasoucre, But I goto bw prd BI datasoucre, I found   80FIAP_O03  datasoucre.
    I think loss  80FIAP_O03  datasoucre for BW1CLNT100 source system, because I am't delete Roules on the 0FIAP_O03 infosoucre  for delete sap soucre systems.
    DSO Activation Error - While Installing BI Content
    this problem no issue, So I create new thread.
    Now, How could me create or load 80FIAP_O03  datasoucre for BW1CLNT100 source system?
    Now, I Replicate Datascoure for BW1CLNT100 source system, Delete old datasocure....... I go home, I will try tomorrow .

    Hello,
    You should generate the export data source for  0FIAP_O03 again, if there is still a problem please goto
    RSA1 > SOURCE SYSTEMS > and right click on the relevant source system, find the datamart application component and
    right click on this to replicate the datasource.
    Best Regards,
    Des

  • Business Content Activation - run time error

    Hi guys,
    We were at plugin 2002.1. We installed PI 2002.2 and PI 2003.1 on top of it.
    After the plug-in upgrade, we are at support pack 9 for SAP-BW and 13 for BI-Content. For aba and basis, we are at 620 and support pack 32.
    As part of the regression testing after the 2003.1 plugin upgrade, we found out that the business content activation abends with the following run time error.
    Runtime Errors         SAPSQL_ARRAY_INSERT_DUPREC
    Exception              CX_SY_OPEN_SQL_DB
    Looks like it is trying to insert into table RSOLTPSOURCEFIET and the row already is existing. I thought the activation process is supposed to update something if it is already out there.
    If we just select the 'only necessary', the activation goes through ok, but if we select 'before and after in the data flow', we get this abend.
    Any clues???
    Best regards,
    makaleem

    Hi Seow,
    This is how I resolved it. I looked at the ST22 closely and one of the messages indicated that the number range is missing in tran SNRO for an infoObject. I created an entry for that infoobject using SNRO and tried activation and it worked.
    When we created an OSS for SAP to look into it, they recommended the following two things. I tried these two but it did not work. I am mentioning them below just in case they may help you.
    1) Sometimes there is inconsistency in the content cache when trying to activate objects and we have to delete the repository cache. To delete the repository cache, go to RSA1 ---> Business Content -
    > Extras ---> Delete Rep Cache
    2) Execute SAP_DROP_TMPTABLES program for types 1,2,3 and 6.
    If this helps, don't forget to assign points.
    Abdul

  • Syntax error in routine

    Hi Gurus,
        I have added new fields in ODS  and Cube.While activating transformation I am getting the following error : 'Start routine:Syntax error in routine'Please let me know how to trouble shoot the same.
    Regards
    Hasini

    Hi Pallavi,
    Pls gothroug the Routine:
    MONITOR_RECNO.
    Runtime attributs
        SOURCE_SYSTEM  = p_r_request->get_logsys( ).
    Migrated update rule call
      Perform routine_9998
      TABLES
        SOURCE_PACKAGE
      CHANGING
        l_abort.
    *-- Convert Messages in Transformation format
        LOOP AT MONITOR_RECNO INTO ls_monitor_recno.
          move-CORRESPONDING ls_monitor_recno to MONITOR_REC.
          append monitor_rec to MONITOR.
        ENDLOOP.
        LOOP AT MONITOR INTO ls_monitor.
          move-CORRESPONDING ls_monitor to MONITOR_REC.
          append monitor_rec to MONITOR.
        ENDLOOP.
        IF l_abort <> 0.
          RAISE EXCEPTION TYPE CX_RSROUT_ABORT.
        ENDIF.
    $$ end of routine - insert your code only before this line         -
      ENDMETHOD.                    "start_routine
          Method inverse_start_routine
    E:In PERFORM or CALL FUNCTION "ROUTINE_9998", the actual parameter
    SOURCE_PACKAGE" is incompatible with the formal parameter
    "DATA_PACKAGE".
    Regards
    Hasini

  • My ipod touch 5th gen is stuck on activation error, how do i fix it?

    My ipod touch 5th generation is stuck on activation error and I got this for Christmas so I don't know what the ipod developer program is! please help

    First, try a system reset.  It cures many ills and it's quick, easy and harmless...
    Hold down the on/off switch and the Home button simultaneously until you see the Apple logo.  Ignore the "Slide to power off" text if it appears.  You will not lose any apps, data, music, movies, settings, etc.
    If the Reset doesn't work, try a Restore.  Note that it's nowhere near as quick as a Reset.  It could take well over an hour!  Connect via cable to the computer that you use for sync.  From iTunes, select the iPad/iPod and then select the Summary tab.  Follow directions for Restore and be sure to say "yes" to the backup.  You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod.  Again, say "yes."
    At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod.  As before, say "yes."  Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time.  If that happens, only the apps that are part of the IOS will appear on your device.  Corrective action is simple -  choose manual "Sync" from the bottom right of iTunes.
    If you're unable to do the Restore, go into Recovery Mode per the instructions here.

  • HT4061 I am receiving an Activation Error and unable to get into my phone.It's asking me to register my phone in the iPhone Developer program however I'm already registered. How do I move forward?

    I am receiving an Activation Error and unable to get into my phone.It's asking me to register my phone in the iPhone Developer program however I'm already registered. How do I move forward?

    Hi, jsgladden. 
    Here is an article I would recommend when experiencing issues activating a device.  The step referring to recovery mode usually resolves the issue.
    iPhone: Troubleshooting activation issues
    http://support.apple.com/kb/TS3424
    To retrieve your data, you will need to restore from backup after processing these steps.  Here is the article that walks you through restoring from either your iCloud or iTunes backup.
    iOS: How to back up and restore your content
    http://support.apple.com/kb/HT1766
    Cheers,
    Jason H.

  • "ON VALUE REQUEST FOR" Activation Error!

    Hi All,
    Am using a field on my Selection Screen:
    SELECT-OPTIONS s_kh_ch FOR p9240-subty NO INTERVALS.
    When, am calling an event, to populate the search help for this field:
    AT SELECTION-SCREEN ON VALUE-REQUEST FOR s_kh_ch-low.
    PERFORM f_call_f4_help TABLES git_subty_9240 USING 'SUBTY' 'P9240-SUBTY'.
    It is giving an activation error!
    "ON VALUE REQUEST FOR" should be followed by <parameter> or <select-option>-LOW/<select-option>-HIGH.
    BUT, For your Information, the same On Value Request For event works well, when i define the field as PARAMETER!
    Why is this error being thrown ? Anyone faced this kind of activation error?
    Kindly Help...
    Thanks in advance.
    Rgds,
    Sundar.

    HI,
    try this
    data: g type anla-anln1.
    data: itab like anla occurs 0 with HEADER LINE.
    select-options s for g.
    at selection-SCREEN on VALUE-REQUEST FOR s-low.
      perform routine tables itab
                       using s-low.
    *&      Form  routine
          text
         -->P_ITAB  text
         -->P_S_LOW  text
    FORM routine  TABLES   P_ITAB STRUCTURE anla
                  USING    P_S_LOW.
    ENDFORM.                    " routine
    reward points if helpful,
    regards,
    venkatesh

  • Content Encoding Error Message re invalid or unsupported form of compression

    After installing the last update, when I would attempt to go to various websites, even google, I would get this message on some sites not all. I did not get on IE or chrome.
    "Content Encoding Error
    The page you are trying to view cannot be shown because it uses an invalid or unsupported form of compression.'
    This is what I did.
    Open Firefox
    1) in the address bar, type: about config 2) promise to be careful 3) type in the filter bar: encoding 4) double click on the value column of network.http.accept-encoding 5) change the 'string value' from "gzip, deflate" to "true" (I had to type that in.) I found that on another string that was closed that the moderator said not to do it or it could mess things up.
    I do not know if issue was caused by last update as add or remove programs in control panel does not show Mozilla updates so I could not uninstall last udate. Only other thing I had done was reinstall Real Player Plus with Real downloader and Speed-bit accelerator as I was having trouble downloading flash videos from web pages mainly from Firefox. (Chrome in its wisdom playing god disabled the addon without even asking me so I could not use Chrome for downloads-they said something about not knowing publisher or certificate--"Real Networks"!!! maybe Google-Chrome does not want users of "You Tube which I think it owns to be able to download offf it with competitor or sort of competitor's applications.) I do not know that the Rel Player re-installation had anything to do with the Firefox error message-just contemporaneous in time as was the Firefox update that I only knew about as Firefox let me know I had to restart to finish installation of update.
    After ten minutes after making changes re config it seems to be operating OK

    After leaving my computer on all night with Chrome and Firefox both open but doing no downloading, etc., I noticed that Wincows Task Manager icon was all green showing 100% CPU usage. I opened Internet Explorer 8 which had been off all night. I looked at Windows Task Manager "processes". It shows firefox.exe with cpu at 86 to 95, iexplore.exe two instances, both at at 00-02, and chrome.exe (2 instances) both at 00. Realpaly.exe also left on all night after burning multiple Cds 6 hours earlier was also at zero. Nothing named speed bit had an active process, but videoacellerator.exe and VideoacceleratorService.exe both of which I allowed to stay in a startup folder were both at 00. Firefox is not downloading videos etc. It has two windows open, one at eBay and one support.mozilla on this issue(content encoding error). This all started occcurring after the latest Firefox update that necessitated the restarting of my computer. I have th two Firefox extensions that like T=Real Downloader allow downloads of flash videos on web pages and neither one was active Flash and Video Download, and Flash Video Downloader the former had been active for several continuous days downloading multiple video clips but had been turned off before I went to bed. After an hour typing this things are still the same with Firefox the CPU hog , still at 84-97, chrome.exe and iexplore.exe still both under 05. For some reason with the recent update tht required restarting the computer Firefox has become a CPU hog and is not working properly withprograms (Windows downloader and Speedbit) and has the content encoding error message issue as wll as sometimes IE not able to go to some pages. My CPU icon in taskbar is teill all green, and can't close firefox without a lot of hassle as that is what I am typing this on.., but I bet that when I do total CPU usage goes to 20 or so and system idle process is the only process with numbers over 80 for CPU.
    Has anyone told a webpage manager that there is an encryption problem with their webpage (such as Google or Amazon) as the error message instructs us to do?

Maybe you are looking for